FA301620U0095 RFQ - Salient Characteristics.pdf

502 CONS/JBKAE FA301620U0095

JBSA-Lackland, TX Modular Plate Carrier

SALIENT CHARACTERISTICS

• Construction of the Plate Carrier must meet MIL‐Spec stitching standards, Type E thread.

• Materials 500 denier Dupont Cordura

• Bartacked Stress Points with MODULAR webbing throughout

• Overall size: 15.5L x 13.5W and Weigh 3.13lbs without Plates

• Modular web attachment points on entire vest profile

• Front, back and side plate compatible

• Quick release tabs for front and back plate removal

• Concealable rear adjustment

• Cummerbund style adjustment with side panels constructed with elastic

• Padded shoulder straps with additional removable wrap around pads

• Wire, antenna or hydration hose guides

• Spine plate sleeve with reinforced drag handle

• Centered front pouch for utility gear

• Interior hooks and loop attachment points for shoulder or collar soft armor

• Cummerbund must include interior side radio pouches

• Non-Ballistic Front and Back Training Plate Inserts

• Non‐Ballistic ESAPI Shaped Insert

• 1/8” Thick Laser Cut Steel backed by 1” Slotted Polyethylene Foam

• Superior strength and shock absorption

• Impervious to mildew, mold, rot and bacteria

• 2x plate inserts required per plate carrier

• Size (2 inserts per Plate Carrier Size, i.e. Small=Small):

• Mirror size/weight of DOD SAPI/ESAPI Plates

• Small – (3.5 lb) (8 ¾ x 11 ¾ in)

• Medium – (4.0 lb) (9 ½ x 12 ½ in)

• Large – (4.6 lb) (10 1/8 x 13 ¼ in)

• Extra‐Large – (5.3 lb) (11 x 14 in)