FA301620U0095 RFQ - Modular Plate Carrier - FBO.pdf
PDF 199 KB Posted
- Attached to
- Modular Plate Carrier Federal contract opportunity
- Solicitation number
- FA301620U0095
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA301620U0095 RFQ - Modular Plate Carrier - FBO updated 20Jul20.pdf | ||
| FA301620U0095 RFQ - Salient Characteristics.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
502 CONS/JBKAE FA301620U0095
JBSA-Lackland, TX Modular Plate Carrier
Request for Quote: FA301620U0095
Modular plate carrier with non-ballistic training plates
(The quote shall be effective for 30 days after submission of quote)
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice.
This announcement constitutes the only solicitation; quotations are being requested and a separate RFQ will not be issued. The solicitation number is FA301620U0095 and is issued as a RFQ. This combined synopsis/solicitation incorporates provisions and clauses are those in effect through Federal Acquisition Circular 2020-07, DFARS change notice 20200114, and AFAC 2019-1001.
This purchase is restricted to Small Business concerns under the NAICS code 339113 and the size standard 750 employees.
Please respond to this RFQ by emailing response to the contract administrator, Aaron Kyle, E-mail:
aaron.kyle@us.af.mil, phone: (210) 671-4757 or Christal Jackson at christal.jackson.6@us.af.mil 210-671-1762 no later than 3:00PM Central Time on 20 Jul 2020 (or sooner if possible) in order to be considered timely. Any quote, modification, revision, or withdrawal of a quote received after the exact time specified above shall be determined as late and will not be considered unless received before award is made, the Contracting Officer determines that accepting the late quote would not unduly delay the acquisition, and it was the only quote received.
Additionally, email any questions regarding this RFQ to Aaron Kyle at the above noted email address no later than 3:00PM Central Time on 14 Jul 2020.
** Please provide a quote for the line items listed below. Failure to quote on all CLINs or failure to submit all pages of this RFQ with all applicable clauses/provisions filled in will render the quote unacceptable and ineligible for award consideration in the absence of discussions. **
ITEM DESCRIPTION QTY Unit Unit Price Extended Amount
Modular Plate Carriers w/ non ballistic training plate inserts (front and back) - Small (COLOR
MUST BE OCP OR MULTICAM)
117 EA $ _________ $ __________
Modular Plate Carriers w/ non ballistic training plate inserts (front and back) - Medium (COLOR
300 EA $_________ $___________
Modular Plate Carriers w/ non ballistic training plate inserts (front and back) - Large (COLOR
200 EA $________ $__________
Modular Plate Carriers w/ non ballistic training plate inserts (front and back) – X-Large (COLOR
50 EA $____________ $_________
**See Salient Characteristics in attachement**
TOTAL COST $___________
Please provide the information below:
FOB
Destination
Origin
Shipping Cost Included?
Yes
No
Pricing Quoted:
GSA Pricing Only.
Includes Open Market prices.
Payment Terms Delivery Date
Company
Name:
DUNS # Required Cage Code Number:
POC: Telephone #
E-Mail Address: Tax ID#:
GSA Number: Warranty Information:
Special Notes and Instructions:
1. This order is a set-aside for small business concerns. Only quotes submitted by small business concerns with the applicable NAICS and size standard will be considered (NAICS Code 339113 and the size standard of 750 employees). Any quote that is submitted by a contractor that is not a small business concern with the appropriate NAICS will not be considered for award.
2. Basis for Award. Award of this Firm Fixed Price, Commercial, Delivery Order will be based on contractor's eligibility status as a small business under the GSA Schedule program; correct NAICS code and
Business Size; technical acceptability of required supplies or services; and overall fair and reasonableness of submitted pricing. To be eligible for award, the offeror must have current Representations and Certifications in accordance with FAR Subpart 52.212-3. These are usually attached to the solicitation for offerors to complete; however, in accordance with DFARS Subpart 212.301(f), the contracting officer will consider required data if available electronically (up-to-date and current in the System for Award Management located at https://www.sam.gov/SAM) instead of requiring the offeror to complete these provisions and submit with proposal. All CLINs will be individually evaluated for price fair and reasonableness.
3. Best Value Determination. The Lowest Priced, Technically Acceptable (LPTA) quote will be determined to represent the best value. Technical acceptability will be determined by an evaluation of the quoted requirements that meet the technical criteria that is contained in the solicited item description or it’s equal. Quotes initially will be ranked from lowest to highest based on total cost. The Government will then evaluate the three lowest priced quotes for Technical Acceptability. However, the Government reserves the right to evaluate additional quotes for technical acceptability if deemed to be in the best interest of the Government. If additional quotes are evaluated for technical acceptability, they will be evaluated in the order of total cost. Award will be made to the responsible vendor whose quote is the lowest evaluated price among technically acceptable quotes.
4. Discussions. The government intends to award a purchase order without discussions with respective vendors/quoters. The government however, reserves the right to conduct discussions if deemed in its best interest.
5. Mandatory Registrations. To be eligible for award, registration with the System for Award Management (SAM) must be current (legacy for On-line Registration and Certifications Application (ORCA) and Central Contractor Registration (CCR) registrations). To register or update former CCR and Reps & Certs that are not current, go to https://www.sam.gov/SAM/ and provide mandatory information. The Defense Finance and Accounting Service (DFAS) is the finance and accounting organization for the Department of Defense DFAS regulations and requires all contractors and vendors to submit payment requests and receiving reports in electronic form. Invoicing, Receipt, Acceptance and Property Transfer (iRAPT (formerly WAWF)) is the accepted electronic method for the submission of payment requests and receiving reports. Any offeror not having electronic invoicing capabilities will be ineligible for award unless one of the exceptions applies in accordance with DFARS 232.7002.
6. Notice to Offeror. The Government reserves the right to cancel this Request for Quotes (RFQ), either before or after suspense date. In the event the Government cancels this RFQ, the Government has no obligation to reimburse an offeror for any costs. The contractor shall not request, nor will the Government make, payments for any preliminary measurement, quotes, bids, site visit, time or proposal cost incurred.
7. Delivery: Delivery shall be FOB Destination and included in price of each CLIN noted above unless otherwise and clearly stated by offeror in the submitted offer. Delivery shall be no later than 90 days after award.
Items must be delivered to the following address:
343d Training Squadron - Security Forces Academy
1350 Scott Dr. Bldg. 10263 JBSA-Lackland, TX 78236
8. The following FAR/DFARS/AFFARS provisions and clauses are applicable to this solicitation:
(For full text references, go to https://www.acquisition.gov/browse/index/far.)
52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation 52.204-7 System for Award Management 52.204-13 System for Award Management Maintenance 52.204-16 Commercial and Government Entity Code Reporting 52.204-18 Commercial and Government Entity Code Maintenance 52.204-22 Alternative Line Item Proposal 52.211-17 Delivery of Excess Quantities https://www.sam.gov/SAM/
52.212-1 Instructions to Offers 52.212-4 Contract Terms and Conditions – Commercial Items 52.223-18 Encouraging Contractor Policies on Ban Text Messaging While Driving 52.223-22 Public Disclosure of Greenhouse Gas Emissions and Reduction Goals-Representation 52.225-13 Restrictions on Certain Foreign Purchases 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to
Iran-Representation and Certifications 52.232-23 Assignment of Claims 52.232-39 Unenforceability of Unauthorized Obligations 52.232-40 Providing Accelerated Payments to Small Business Subcontractors 52.233-1 Disputes 52.233-3 Protest After Award 52.233-4 Applicable Law for Breach of Contract Claim 52.233-39 Unenforceability of Unauthorized Obligations 52.247-34 FOB Destination 52.249-1 Termination for Convenience 52.252-1 Solicitation Provisions Incorporated By Reference 252.203-7000 Requirements Relating to Compensation of Former DoD Officials 252.203-7002 Requirements to Inform Employees of Whistleblower Rights 252.204-7003 Control of Government Personnel Work Product 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support 252.215-7013 Supplies and Services Provided by Nontraditional Defense Contractors 252.223-7008 Prohibition of Hexavalent Chromium 252.232-7010 Levies on Contract Payments 252.225-7001 Buy American Act and Balance of Payment Programs 252.225-7048 Export-Controlled Items 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports 252.232-7006 Wide Area Workflow payment instructions 252.232-7010 Levies on Contract Payments 252.243-7001 Pricing of Contract Modifications 252.244-7000 Subcontracts for Commercial Items 252.247-7023 Transportation of Supplies by Sea 5352.201-9101 Ombudsman 5352.223-9000 Elimination of Use of Class I Ozone Depleting Substances (ODS)
CLAUSES IN FULL TEXT
52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (Aug 2019)
(a) Definitions. As used in this provision- Covered telecommunications equipment or services, Critical technology, and Substantial or essential component have the meanings provided in clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.
(b) Prohibition. Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Contractors are not prohibited from providing-
(1) A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or
(2) Telecommunications equipment that cannot route or redirect user data traffic or permit visibility into any user data or packets that such equipment transmits or otherwise handles.
(c) Representation. The Offeror represents that- It [_] will, [_] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation.
(d) Disclosures. If the Offeror has responded affirmatively to the representation in paragraph (c) of this provision, the Offeror shall provide the following information as part of the offer
(1) All covered telecommunications equipment and services offered (include brand; model number, such as original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable);
(2) Explanation of the proposed use of covered telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b) of this provision;
(3) For services, the entity providing the covered telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known); and
(4) For equipment, the entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).
(End of provision)
52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (Feb 2016)
(a) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that-
(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or
(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.
(b) The Offeror represents that-
(1) It is [_] is not [_] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and
(2) It is [_] is not [_] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.
(End of provision)
ADDENDUM TO 52.212-1, INSTRUCTIONS TO OFFEROR - COMMERCIAL ITEMS (OCT 2018)
The following paragraphs have been deleted:
52.212-1(h), Multiple Awards 52.212-1(i), Availability of Requirements Documents Cited in the Quote
(a) Paragraph 52.212-1(c), Period for Acceptance of Quotes, is tailored as follows: "The offeror agrees to hold the prices in its quote firm for 60 calendar days from the date specified for receipt of quotes."
(b) The following is inserted as new paragraph (m) of the provision:
(m) Quote Preparation Instructions A. To assure timely and equitable evaluation of quote, offeror must follow the instructions contained herein.
Offerors are required to meet all quote requirements, including terms and conditions, and technical requirements, in addition to those identified as evaluation factors. Offeror must clearly identify any exception to the quote terms and conditions and provide complete accompanying rationale.
B. Specific Instructions:
(i) Acceptable - The quote clearly meets the minimum requirements of the quote as listed in the attached Salient Characteristics.
(ii) Unacceptable - The quote does not clearly meet the minimum requirements of this quote and its attachments.
1. PRICING DATA - Submit 1 electronic copy
(a) Insert proposed unit price(s) and extended amount(s) in the Schedule of Supplies/Services for each line item.
2. SUBMISSION OF QUOTE
(a) Quotes shall be submitted to the Contract Specialist directly by emailing all required documentation to (aaron.kyle@us.af.mil. Secondary Point of Contact for submission: (christal.jackson.6@us.af.mil) mailto:aaron.kyle@us.af.mil mailto:christal.jackson.6@us.af.mil
3. SUBMISSION OF Specifications and Pictures
(a) Samples of carriers- The contractor must submit a spec sheet and picture with their quote. Please refer to Salient Characteristics – last page.
ADDENDUM TO 52.212-2 Evaluation - Commercial Items (Oct 2014) The following have been deleted:
(b) Options has been deleted in its entirety (b)(iii) Past Performance has been deleted in its entirety The following have been added or changed Addendum to 52.212-2(a): Paragraph (a) is tailored as follows:
(a) Basis for Award. The Government intends to award one Firm Fixed Price contract for this acquisition. Award will be made to technically acceptable Offeror who is deemed responsible in accordance with FAR 9.104 and whose quote conforms to the solicitation requirements. The solicitation requirements include all stated terms, conditions, and all other information required by this quote. Unless specifically identified in your quote, by submission of its quote, the Offeror accedes to all solicitation requirements, including terms and conditions, and technical requirements, in addition to those identified as evaluation factors. Failure to meet a requirement may result in a quote being determined ineligible for award. This contract will be awarded as Firm Fixed Price (FFP). It is the Government's intent to evaluate quotes and award without interchanges with Offerors. Therefore, the Offerors initial quotes should contain the Offerors best terms from a price, and technical standpoint. However, the Government reserves the right to conduct interchanges if the Contracting Officer (CO) later determines them to be necessary.
1.0 Evaluation Process. The evaluation factor and process to be used is listed below.
1.1 Evaluation Factors. In evaluating quotes, the Government will select the quote that is most advantageous to the Government. To arrive at a decision, each quote will be assessed in accordance with the following evaluation factors for the award: Price and Technical Acceptability
1.1.1 Price Evaluation. Evaluations will be completed by multiplying the Offerors unit price by the estimated quantity. An offeror’ s proposed Total Evaluated Price will be determined by multiplying the estimated quantities identified in the Schedule of Supplies by the quoted unit price for each Line Item Number (CLIN). The Government may require submission of information other than cost or pricing data to the extent necessary to evaluate price reasonableness.
1.1.2 Technical Evaluation. The three lowest quotes will be evaluated for Technical Acceptability.
(A) Acceptability Ratings. The evaluation factors listed below will be used to evaluate each quote and will receive one of the following ratings:
1.1.2.2 Evaluation of Factors. Offerors are advised that their initial submission should be their best effort. Only technically acceptable quotes, either initially or as a result of interchanges, are eligible for award. If award is made without interchanges, quote revisions will not be permitted. The Government will evaluate the quotes selected above for technical acceptability on an Acceptable/Unacceptable basis. For the technical quote to be rated as "Acceptable", the technical factor must be rated acceptable. If the technical factor is rated "Unacceptable" the overall quote will be rated as "Unacceptable".
(A) Interchanges. Under appropriate circumstances, interchanges can be an effective method to improve the Government's evaluation of Offerors quoted approaches and may reduce acquisition cycle time. Interchanges may be written, email, phone call, etc., or any method which would accurately capture the contemporaneous sharing of information between the Government and the Offerors. Interchanges may also be oral conversations between the Government and the Offerors.
(B) Factor # 1 - Submit product descriptions for each item being quoted. The offeror shall submit product specifications that match the Technical Specifications. The standard has been met when: The offeror provides products that fully conform to the product description requirements specified in the salient characteristics.
52.212-3 Offeror Representations and Certifications-Commercial Items. (OCT 2018) Alternate I 2014-10
The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u)) of this provision.
(a) Definitions. As used in this provision- Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.
Forced or indentured child labor means all work or service-
(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or
(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.
Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.
Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.
Inverted domestic corporation, means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C.
395(c).
Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except-
(1) PSC 5510, Lumber and Related Basic Wood Materials;
(2) Product or Service Group (PSG) 87, Agricultural Supplies;
(3) PSG 88, Live Animals;
(4) PSG 89, Subsistence;
(5) PSC 9410, Crude Grades of Plant Materials;
(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;
(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;
(8) PSC 9610, Ores;
(9) PSC 9620, Minerals, Natural and Synthetic; and
(10) PSC 9630, Additive Metal Materials.
Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.
Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.
Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate-
(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;
(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;
(3) Consist of providing goods or services to marginalized populations of Sudan;
(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;
(5) Consist of providing goods or services that are used only to promote health or education; or
(6) Have been voluntarily suspended. Sensitive technology- Sensitive technology-
(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-
(i) To restrict the free flow of unbiased information in Iran; or
(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and
(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3)of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).
Service-disabled veteran-owned small business concern-
(1) Means a small business concern-
(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and
(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.
(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service connected, as defined in 38 U.S.C. 101(16).
Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.
Small disadvantaged business concern, consistent with13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that-
(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by-
(i) One or more socially disadvantaged (as defined at13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and
(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR124.104(c)(2); and
(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.
Subsidiary means an entity in which more than 50 percent of the entity is owned-
(1) Directly by a parent corporation; or
(2) Through another subsidiary of a parent corporation Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term successor does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.
Veteran-owned small business concern means a small business concern-
(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and
(2) The management and daily business operations of which are controlled by one or more veterans.
Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.
Women-owned small business concern means a small business concern-
(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least51 percent of the stock of which is owned by one or more women; and
(2) Whose management and daily business operations are controlled by one or more women (b)
(1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM
(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____.
[Offeror to identify the applicable paragraphs at (c) through (u) of this provision that the offeror has completed for the purposes of this solicitation only, if any.
These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.
Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]
(c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply.
(1) Small business concern. The offeror represents as part of its offer that it [_]is, [_]is not a small business concern.
(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph(c)(1) of this provision.] The offeror represents as part of its offer that it [_]is, [_]is not a veteran-owned small business concern.
(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern.
(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, that it [_]is, [_]is not a small disadvantaged business concern as defined in 13 CFR124.1002.
(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern.
(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that-
(i) It [_]is, [_]is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and
(ii) It [_]is, [_]is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: ____.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.
(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that-
(i) It [_]is, [_]is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and
(ii) It [_]is, [_]is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture.
[The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: ____.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.
Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.
(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_]is a women-owned business concern.
(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:____
(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph(c)(1) of this provision.] The offeror represents, as part of its offer, that-
(i) It [_]is, [_]is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and
(ii) It [_] is, [_] is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: ____.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.
(d) Representations required to implement provisions of Executive Order11246-
(1) Previous contracts and compliance. The offeror represents that-
(i) It [_] has, [_] has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and
(ii) It [_] has, [_] has not filed all required compliance reports.
(2) Affirmative Action Compliance. The offeror represents that-
(i) It [_] has developed and has on file, [_] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or
(ii) It [_] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.
(e) Certification Regarding Payments to Influence Federal Transactions (31 http://uscode.house.gov/ U.S.C.
1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.
(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American-Supplies, is included in this solicitation.)
(1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products,i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of domestic end product. The terms commercially available off-the-shelf (COTS) item component, domestic end product, end product, foreign end product, and United States are defined in the clause of this solicitation entitled Buy American-Supplies.
(2) Foreign End Products:
| Line Item No. || Country of Origin |
[List as necessary]
(3) The Government will evaluate offers in accordance with the policies and procedures of FAR part 25.
(g)
(1) Buy American-Free Trade Agreements-Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act, is included in this solicitation.)
(i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product, commercially available off-the-shelf (COTS) item, component, domestic end product, end product, foreign end product, Free Trade Agreement country, Free Trade Agreement country end product, Israeli end product, and United States are defined in the clause of this solicitation entitled Buy American-Free Trade Agreements-Israeli Trade Act.
(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled Buy American-Free Trade Agreements-Israeli Trade Act:
Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:
| Line Item No. || Country of Origin |
[List as necessary]
(iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled Buy American-Free Trade Agreements-Israeli Trade Act. The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of domestic end product.
Other Foreign End Products:
| Line Item No. || Country of Origin |
[List as necessary]
(iv) The Government will evaluate offers in accordance with the policies and procedures of FAR part 25.
(2) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:
(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled Buy American-Free Trade Agreements-Israeli Trade Act:
Canadian End Products:
| Line Item No. |
[List as necessary]
(3) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:
(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled Buy American-Free Trade Agreements-Israeli Trade Act:
Canadian or Israeli End Products:
| Line Item No. || Country of Origin |
[List as necessary]
(4) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:
(g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled Buy American-Free Trade Agreements-Israeli Trade Act:
Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:
| Line Item No. || Country of Origin |
[List as necessary]
(5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.)
(i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled Trade Agreements.
(ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products.
Other End Products:
| Line Item No. || Country of Origin |
[List as necessary]
(iii) The Government will evaluate offers in accordance with the policies and procedures of FAR part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation.
(h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals-
(1) [_]Are, [_]are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency;
(2) [_]Have, [_]have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property;
(3) [_]Are, [_]are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and
(4) [_]Have, [_]have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,500 for which the liability remains unsatisfied.
(i) Taxes are considered delinquent if both of the following criteria apply:
(A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted.
(B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded.
(ii) Examples.
(A) The taxpayer has received a statutory notice of deficiency, under I.R.C. ?6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability.
Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.
(B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. ?6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability.
Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.
(C) The taxpayer has entered into an installment agreement pursuant to I.R.C. ?6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment.
(D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. ?362 (the Bankruptcy Code).
(i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).]
(1) Listed end products.
| Listed End Product || Listed Countries of Origin |
(2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.] [_] (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product.
[_] (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor.
(j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly-
(1) [_] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or
(2) [_] Outside the United States.
(k) Certificates regarding exemptions from the application of the Service Contract Labor Standards (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) [The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.]
(1) Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror [_] does [_] does not certify that-
(i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations;
(ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and
(iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .