Question and Answer - PMEL Workbenches.xlsx
XLSX spreadsheet 11 KB Posted
- Attached to
- PMEL Laboratory Workbenches
- Solicitation number
- FA301025Q0053
About this file
This document is a Questions and Answers (Q&A) file for a PMEL Laboratory Workbenches solicitation issued by the Department of the Air Force Air Education and Training Command. The Q&A, dated 18 September 2025, addresses three specific technical inquiries about workbench specifications. Key details include clarification on table leg configuration (requiring at least 4 legs for stability), drawer system specifications (16"W X 20"D X 16"H, undermounted with drawers no more than 6" high), and power strip requirements (12 outlets, mountable to the bench's underside or back of work surface).
The related federal contract opportunity, solicitation number FA301025Q0053, is for PMEL Laboratory Workbenches, indicating a procurement for specialized laboratory furniture. The solicitation is being conducted by the Air Force's Air Education and Training Command, suggesting these workbenches are intended for technical training or calibration environments typical of Precision Measurement Equipment Laboratories (PMEL).
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Q&A PMEL Workbenches Q&A Version 1 Date 18 September 2025
| Question # | Date Received | Question | Response |
| 1 | 09/16/25 | Attachment 1 specifies 12-foot-long tables but does not indicate the number of legs. Typically, a 12-foot table requires three legs for adequate support. Could you confirm the required leg configuration? | We would require at least 4 legs for the table’s stability while under load. |
| 2 | 09/16/25 | The attachment references two undermounted 3-drawer systems but does not provide details regarding design, location (beyond “undermount”), size, or drawer depth. Could you give these specifications? | The drawer system should be approximately 16”W X 20”D X 16”H to be mounted to the underside of the main work surface each drawer should be no more than 6”H. |
| 3 | 09/16/25 | For the minimum of 12 power strips, could you clarify the desired installation location—on the backside of the tabletop, or mounted beneath the riser shelf? | The power strips need to have 12 outlets each and be able to be mounted to the bench either to the under side of the riser or the back of the main work surface. |
File details come from the government source that posted it. Updated .