(1) UPDATED SOO_Redacted.pdf

Statement of Objectives

Tactical Autonomy Digital Test Environment (TA-DTE)

1 Apr 24

Part 1. General Information

1.0. Introduction

1.0.1. Installation of security blue light and electrical upgrades in

1.1. Background

1.1.1. The at Eglin AFB requires the

installation of electrical upgrades in the Tactical Autonomy Digital Test Environment (TA-DTE). The TA-DTE is a Combat Collaborative Aircraft (CCA) line of effort that will serve as a Special Access Program facility (SAPf) for tactical autonomy flight tests near building . These electrical upgrades will allow our facility to be ready by fully operational timelines.

1.2. Scope

1.2.1. Install security blue lights, make umbilical connection from external NEMA box to facility, and electrical upgrades to receptacles on SeaBox Relocatable Simulation Structure (RSS).

Part 2. Requirements

2.1. Technical Requirements

2.1.1. Perform a pre-installation site survey for the purpose of obtaining the site conditions, readiness to proceed with installation, and to tag locations of hardware/electrical junction boxes.

2.1.2. Provide and install the electrical upgrades as detailed in the “Design Requirements” below and/or in the attached annotated drawings.

2.1.3. Perform a system verification test and Government Acceptance Test prior to system turnover.

2.1.3.1. Provide a typical wiring diagram for electrical plans.

2.2. Design Requirements

2.2.1. Security Blue Light Systems

2.2.1.1. Install (8) Security Blue lights (BL), (1) Switch to turn on Blue Lights (SBL),

2.2.1.1.1. Switch: Entry Door

2.2.1.1.2. Blue Lights: (8) Mounted on Walls

2.2.1.2. Terminate all system cabling.

2.2.1.3. Test full system function.

2.2.1.4. Provide (1) hour of system training with the Blue Light control for 2 people.

2.2.1.5. Provide system configuration, testing, and close out documentation.

2.2.2. Install (18) Quadraplex receptacles with dedicated circuits, (31) Dedicated Circuits for furniture with (4) outlets.

2.2.2.1. See Attachment: Power Layout.png

2.2.3. Install (3) Unistrut rack assemblies.

2.2.3.1. See Attachment: Strut Layout.png

2.3. Deliverables

2.3.1. TESTING- Electrical System and Blue Light:

2.3.1.1. Each item listed in 2.2.1.1. will be tested and approved by the designated government representative. Functions to be tested and necessary results:

2.4. Documentation

2.4.1. Documentation will include the following:

2.4.1.1. A test result document for each location and system that clearly shows the government has

2.4.1.2. witnessed the above noted test procedures and signed off as working.

2.4.1.3. Any copies of hardware manuals delivered with the new installed equipment.

2.4.1.4. A Letter of Warranty indicating the selected period of warranty and the items covered by the warranty.

2.5. Place of Performance

2.5.1.

END OF STATEMENT OF OBJECTIVES