Salient Characteristics.pdf
PDF 678 KB Posted
- Attached to
- Brand Name or Equal, Thermaduct HVAC Ducting
- Solicitation number
- FA282324Q3029
About this file
This document is a Request for Quote (RFQ) for Brand Name or Equal, Thermaduct HVAC Ducting for the Department of the Air Force Materiel Command Test Center.
The RFQ requires 3 pieces of Thermaduct totaling 150 sq ft of R-12 Thermaduct, fabricated per the attached exhibits, as well as DuctSox materials including 1 piece of 16" diameter, 25' ducting with an inlet/zipper, 2 round elbows, 1 piece of 16" diameter, 31' ducting with a zipper/end cap, and 2 single wall spiral fittings. The procurement is a 100% Small Business set-aside with award to the lowest priced, responsible Offeror whose quote conforms to all requirements. The NAICS code is 423730 - Warm Air Heating and Air-Conditioning Equipment and Supplies Merchant Wholesalers. A firm fixed price contract will be awarded with no advance payments.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Combo Solicitation.pdf | ||
| Clarifications.pdf | ||
| Clarifications.pdf | ||
| Clauses and Provisions.pdf | ||
| Salient Characteristics.pdf | ||
| Combo Solicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics
Brand Name Or Equal
Manufacturer: Thermaduct Manufacturer: Ductsox
*Listed are the characteristics for the items required. There is not a range to the dimensions required.
Thermaduct
- 3 Pieces totaling in 150 sq ft of R-12 Thermaduct, shop fabricated according to Exhibit
AA - AC.
DuctSox
- (1) Ø16"(406 mm) - 25' 0" (7.62 m) – o Inlet/Zipper o Fabric: Verona o Suspension: IHS o Hardware Type: Cable o Hardware Included: Yes o Support Type: Galvanized o Support Length: 5 ft
- (2) Round Elbows - Ø16"(406 mm) o Fabric: Verona o Suspension: IHS o Hardware Type: Cable o Hardware Included: Yes o Support Type: Galvanized, Support Length: 5 ft
- (1) Ø16"(406 mm) - 31' 0" (9.45 m) o Zipper/End Cap o Fabric: Verona o Suspension: Pull Tight o Hardware Type: Cable o Hardware Included: Yes o Support Type: Galvanized o Support Length: 5 ft
- (2) Round Elbow - Ø16"(406 mm) o Fabric: Verona o Suspension: Pull Tight o Hardware Type: Cable o Hardware Included: Yes o Support Type: Galvanized o Support Length: 5 ft
Spiral Fittings
- 2 Single wall fittings for transition to fabric duct (12" of round rigid duct for proper connection)
Exhibit AA
5'
8'
HVAC
DISCONNECT --------- 19'-9" - -- - -----1--f
T
8'-4"
6'--U-
14'-4%"
SPLIT UNIT WITH
REMOTE CONTROL
COMM
ROOM
3'-3½" --------------31' -------------
MECHANICAL PLAN
SCALE: 1/4" = 1"
z j_
25'
SPLIT UNIT DISCONNECT
s
_J 1'-6" t
SECONDARY PANEL
DRY TYPE TRANSFORMER
MAIN PANEL
NOTES:
1. FILL ALL WALL ENTRY HOLES WITH INSULATION
FOAM
2. INSTALL SPLIT UNIT CENTERED ON WALL WITH 6
INCH CLEARANCE FROM HARDEN CEILING
3. INSTALL 1/2INCH CONDUIT TO THERMOSTAT
4. DRILL 4 INCH HOLE FOR 3/4 INCH PVC DRAIN PIPE
5. EXTERIOR UNIT MUST HAVE 24 INCH CLEARANCE
FROM ENO WALL
6. INSTALL DUCT SOC 18 INCHES FROM CENTER OF
FACILITY WITH CABLE CORO. SEAL HOLES WITH
SILICONE
7. INSTALL SPLIT UNIT REMOTE NEXT TO UNIT
LEGEND:
G) ELECTRIC THERMOSTAT
AS-BUILTS
Exhibit AB
Exhibit AC
| Salient Characteristics for Ductsox -AMMENDED |
| combined ducting layout |
File details come from the government source that posted it. Updated .