FCX_KVA-Vertical-Brochure_Final.pdf

SHIP-TO-SHORE

The FCXtreme Series provides reliable solid-state converters that are designed to provide 400Hz ground power with a small footprint in applications such as inside aircraft hangars, in electrical equipment rooms, or in maintenance shops.

All models optimized and tested to perform a continuous output power rating with 200% overload capacity in 24/7 operations.

• Individual phase regulation, improved efficiency, and lower input current distortion

• Innovative, adaptive wave optimization and voltage stabilization

• Laminated bus design eliminates transient voltage surges for high performance and increased reliability

• Lightweight powder-coated steel enclosure with sealed electronics compartment superior to typical aluminum enclosures to reduce RF emissions

• Full-featured user interface with detailed troubleshooting menus added to the advanced diagnostic and logging system

• High contrast LED display with 16-button keypad and separate standalone controls to ensure ease of use for most frequent functions

• Standard RS485 Modbus communication and integration capability with available RJ45 Ethernet and Wi-Fi connection capability www.fcxinc.com | 304.983.0400 | sales@fcxinc.com

Ground POWER Solutions For All Generations Of Aircraft

ISO 9001:2008

UNIT PERFORMANCE

Efficiency 93% or better at 100% load

28VDC Output Available 600A rated 28VDC output with 400% surge rating

MTTR Mean time to repair: less than 30 minutes

Operational Life 20 to 25 years

MTBF Mean time between failure: 24,000 hours

Suitable For:

Fixed and Rotary Wing Aircraft and All Other 400 Hz Applications

X60 - X180

Through an innovative design, advanced diagnostic and logging systems, and rugged modular construction, FCXtreme Series products assure maximum power availability and minimal maintenance time.

60 KVA - 180 KVA

New X60 - X180 delivers improved performance in a package over 50% smaller than previous design.

60.0

18.0

20.0 30.0 50.0

7.0

24.0

FORKLIFT

CHANNELS

APPROXIMATE

CENTER OF

GRAVITY

78.0

RIGHT SIDE VIEW

INPUT CONDUITOUTPUT CONDUIT

FRONT VIEW

DOOR MOUNTED

CONTROLS DETAIL

D

C

B

E

F

SPECIFICATIONS

INPUT POWER

Input Voltage 480VAC +/- 10% standard, other input voltages available

Input Frequency 60Hz +/- 1Hz standard, 50Hz optional

Input Phase Rotation Any (automatic phase lock)

Inrush Current None (soft start to rated power)

Protection Overload, short circuit, over voltage, temperature, access door interlock

Input ITHD <5% at rated load, <8% at any load

OUTPUT POWER

Output Power Rating 60kVA continuous

75kVA continuous 90kVA continuous 120kVA continuous

Output Frequency 400Hz, +/- 0.01% for any load condition

Output Voltage 200V L-L / 115V L-N – adjustable +/- 10%

Voltage Regulation +/- 1% Maximum

Voltage Recovery Meets or exceeds limits of MIL-STD-704F, typically less than 50 milliseconds with a 100% load change

Voltage Balance +/- 1% for balanced loads, +/- 2% for 25% unbalanced loads

Harmonic Content 1.5% max., 1% typical (line to line or line to neutral)

Overload Capacity 125% for one hour, 150% for 5 minutes, 200% for 20 seconds

Protection Overload, short circuit, over and under voltage per MIL-STD-704F, over temperature, isolation, aircraft 28VDC E/F interlock, access door interlock

MONITORING AND CONTROLS

Display 4 x 20 character backlit display and dedicated indicator lights, with LED configuration for harsh environments

Control 16-key matrix keypad for full control and monitoring, as well as dedicated stand alone push button controls for Start, Stop/Reset, and Output On/Off control for user friendly operation

Metering Full three-phase monitoring and display of input and output voltage, current, and frequency; built-in troubleshooting guide in display; dedicated elapsed time meter also provided

ENVIRONMENTAL & MECHANICAL

Enclosure NEMA 4 (IP66) equivalent rated steel enclosure with durable powder coat finish. Standard color: RAL9006 “White Aluminum” (gray), other colors available.

Size/Weight 1981mm high x 1270mm wide x 706mm deep (78”H x 50”W x 27.8”D)

Ambient Temp. Range Operating: -40˚C to +50˚C (-40˚F to +122˚F)

Humidity 0 - 100%, non-condensing

Audible Noise Level Less than 68dbA typical @ 1m

CODES AND STANDARDS

Meets or Exceeds UFGS 26 35 43 NFPA 70

MIL-STD-704F SAE ARP-5015

BS2G-219 DFS-400

OPTIONS AND ACCESSORIES

28.5VDC Output with 600A rating

Integral single cable rack

Freestanding or wall mount cable racks

Output circuit breaker for distributed power applications

Dual or Triple output contactors

Unity power factor rating

ISO 9001:2008

www.fcxinc.com | 304.983.0400 400 FCX Lane | Morgantown, WV 26501 sales@fcxinc.com

Engineered for Endurance

Wi-Fi communications integration

Remote operators station(s)

Output power cables

Power usage monitoring

300% overload for 60/90 kVA units

140kVA continuous 160kVA continuous 180kVA continuous

Built-in Troubleshooting Guide in Display

SERVICE AND SUPPORT

At FCX Systems, we take pride in our highly trained support staff, dedicated to providing the best operational and technical support in the industry. Factory technicians are available for on-site training, maintenance and repair services, either in conjunction with our available maintenance plans, or as standalone services. Operational and maintenance training are also available at our factory. With FCX you can rest assured that you will have the support you need, when you need it, from a friendly, professional and experienced staff, 24/7/365.

Electronics Compartment Allows Calibration Without

Arc Flash Gear