VTC_Salient_Characteristics_Letter.pdf

Appendix A From: SMC/GPLPM To: 21 CONS/PKBA Date: 26 Jul 2018 Subject: Salient Characteristics Letter for the CISF Building 2025 Room 164A Secure Video Teleconferencing Installation

Manufacturer: Crestron, Description: DM-MD8x8 / Digital Media AV Switcher, Part Number: 6507183

Specifications

Maximum DM 8G® Cable Lengths Cable Type:

Resolution:

DM-CBL-ULTRA

DigitalMedia™ Ultra Cable

DM-CBL-8G

DigitalMedia 8G™ Cable

Third-Party CAT5e (or better)

UTP or STP 1080p60 Full HD

330 ft (100 m) via any DM 8G+ cards

1920x1200 WUXGA 1600x1200 UXGA 2048x1080 2K DCI @24Hz 2048x1080 2K DCI @60Hz

330 ft (100 m) via "4K" DM 8G+ cards

230 ft (70 m) via "4K" DM 8G+ cards

165 ft (50 m) via "4K" DM 8G+ cards

2560x1440 WQHD 2560x1600 WQXGA 3840x2160 Ultra HD 4096x2160 4K DCI

Cable Type:

Resolution:

CRESFIBER8G

CresFiber® 8G

Multimode Fiber

Third-Party

OM3

Multimode Fiber

CRESFIBER8G-SM

CresFiber 8G

Single-Mode Fiber

Third-Party G.652.D

(or better) Single-Mode Fiber

1080p60 Full HD 1000 ft (300 m) via DM 8G Fiber cards 500 ft (150 m) via DM 8G Fiber cards

7.5 miles (12 km) via DM 8G SM Fiber cards 1920x1200 WUXGA 1600x1200 UXGA 2048x1080 2K DCI @24Hz

Video Switcher 8x8 digital matrix, modular input/output cards, Crestron QuickSwitch HD™

Input Signal Types

Configurable via modular plug-in cards supporting HDMI® (DVI & Dual-Mode DisplayPort compatible [11]), DVI, 3G- SDI, RGB/VGA, component, S-Video, composite (NTSC & PAL), DM 8G+® & HDBaseT®, DM 8G Fiber, DM 8G SM Fiber, DM® CAT (legacy), DM Fiber (legacy), & H.264 streaming

Output Signal Types

Configurable via modular plug-in cards supporting HDMI (DVI compatible [14]), DM 8G+ & HDBaseT, DM 8G Fiber, DM 8G SM Fiber, DM CAT (legacy), DM Fiber (legacy), & H.264 streaming (All input cards also include HDMI pass-through outputs)

Backplane Data Rate 12.5 Gbps

Note: For additional specifications, please refer to the spec sheet for each input and output card.

Audio Switcher 8x8 digital multichannel audio-follow-video matrix switching, plus independent 8x8 stereo matrix for audio breakaway

Input Signal Types

Configurable via modular plug-in cards supporting HDMI (Dual-Mode DisplayPort compatible [11]), 3G-SDI, analog (stereo 2-channel), SPDIF, DM 8G+ & HDBaseT, DM 8G Fiber, DM 8G SM Fiber, DM CAT (legacy), DM Fiber (legacy), & H.264 streaming

Output Signal Types

Configurable via modular plug-in cards supporting HDMI, analog (stereo 2-channel), DM 8G+ & HDBaseT, DM 8G Fiber, DM 8G SM Fiber, DM CAT (legacy), DM Fiber (legacy), & H.264 streaming (All input cards also include HDMI pass-through outputs, and most digital audio input cards also include analog stereo pass-through audio outputs)

Note: For additional specifications, please refer to the spec sheet for each input and output card.

Communications Ethernet 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, Private Network Mode

USB USB signal routing via select input cards, transmitters, receivers, and extenders [15]; USB computer console port for setup

DigitalMedia DM 8G+, DM 8G Fiber, DM 8G SM Fiber, DM Fiber, DM CAT, DMNet™, HDCP 2.2 [3], EDID, CEC, PoDM, PoDM+, Ethernet

HDBaseT HDCP 2.2 [3], EDID, CEC, RS-232, PoH, Ethernet

HDMI HDCP 2.2 [3], EDID, CEC

NOTE: Supports management of HDCP and EDID; supports management of CEC between connected HDMI and HDBaseT devices and a control system.[13] For additional specifications, please refer to the spec sheet for each input and output card.

Card Slots

1 – 8 (8) DM switcher input card slots;

Each slot accepts (1) DMC-series input card

DM OUTPUTS 1

– 8

(4) DM switcher output card slots;

Each slot accepts (1) DMC-series output card

Connectors

LAN (1) 8-pin RJ45 female;

10Base-T/100Base-TX/1000Base-T Ethernet port

24ABG / EIG 1 –

(8) sets of (1) 4-pin and (1) 3-pin 3.5 mm detachable terminal blocks;

Comprises (8) DMNet ports with "EIG" power selection ports, each set is associated with the corresponding DM CAT output port on any installed DM CAT output card;

Each DMNet port provides power and communications for a DM CAT device connected via DM cable;

Each EIG port connects to an external power supply [16], or to the internal power source via a jumper, to power the DM CAT device connected to the corresponding DMNet port;

Maximum Load: 40 Watts (1.66 Amps @ 24 Volts DC) per port, limited to the available DMNet power from the internal power supply (see "Power Requirements" below) or an external power supply [16]

100-240V~4- 1.6A 50/60Hz

(1) IEC 60320 C14 main power inlet;

Mates with removable power cord, included

G (1) 6-32 screw, chassis ground lug

COMPUTER

(front)

(1) USB Type B female;

USB computer console port (6 ft cable included)

Controls & Indicators

LCD Display Green LCD dot matrix, 128 x 64 resolution, adjustable LED backlight, displays inputs/outputs by name, video & audio signal information, Ethernet configuration and setup menus

SOFTKEYS (4) Pushbuttons for activation of LCD driven functions HW-R (1) Recessed pushbutton for hardware reset, reboots the switcher ROUTE (1) Pushbutton and red LED, selects ROUTE mode to allow routing changes VIEW (1) Pushbutton and red LED, selects VIEW mode for viewing current routes INFO (1) Pushbutton and red LED, selects INFO mode for viewing AV and device info MENU (1) Pushbutton, steps menu back one level ENTER (1) Pushbutton, executes highlighted menu or value AUDIO (1) Pushbutton & red LED, selects audio routing view

VIDEO (1) Pushbutton & red LED, selects video routing view USB (1) Pushbutton & red LED, selects USB routing view

Quick-Adjust Knob (1) Continuous turn rotary encoder, adjusts menu parameters

IN 1 – 8 (8) Pushbuttons and red LEDs, each selects the corresponding input for routing OUT 1 – 8 (8) Pushbuttons and red LEDs, each selects the corresponding output for routing LAN (rear) (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity

Power Requirements Main Power 4-1.6 Amps @ 100-240 Volts AC, 50/60 Hz

Power Consumption 220 Watts typical

Available DMNet Power 55 Watts (2.3 Amps @ 24 Volts DC) from internal power supply

Available PoDM/PoH Power

Refer to the specifications for each DM 8G+ input and output card

Environmental Temperature 32° to 104° F (0° to 40° C) Humidity 10% to 90% RH (non-condensing) Heat Dissipation 750 BTU/hr

Ambient Noise 31.5 to 37 dBA typical;

30 to 30.5 dBA idle

Enclosure Chassis Metal with black finish, vented sides, fan-cooled Front Panel Metal, black finish with polycarbonate label overlay Mounting Freestanding or 4 RU 19-inch rack-mountable (adhesive feet and rack ears included)

Dimensions Height 6.97 in (177 mm) without feet Width 17.28 in (439 mm), 19.06 in (485 mm) with rack ears Depth 15.71 in (399 mm) without cards

Weight

20.0 lb (9.1 kg) without cards

1. All output types are configured in pairs except for streaming (a single streaming output occupies the space of two outputs of any other type). To configure a complete DM switcher with output and input cards, please use the online DigitalMedia Switcher Configuration Tool.

Current DM switchers use DMC-series “single-gang” output cards. For older DM switchers with DMCO-series “multi-gang” output cards, please use the online Output Card Additions and Upgrades Tool to update your existing output cards and switcher to the new single-gang output card format.

2. Crestron control via the DM network requires a Crestron control system, sold separately.

3. 4K, Ultra HD, and HDCP 2.2 are currently supported over HDMI, DM 8G+, and HDBaseT using select input and output cards. Refer to the specifications for each input/output card and each connected device for its full capabilities.

4. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable, the choice of input/output card, and the resolution of the video signal. Refer to the “Maximum DM 8G Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment.

https://www.crestron.com/resources/dm-switchers-configurator-configuration https://www.crestron.com/products/model/dmco https://www.crestron.com/resources/dm-switchers-configurator-configuration https://www.crestron.com/products/model/DM-CBL-NP https://www.crestron.com/products/model/DM-CBL-D-NP

5. The maximum cable length for DigitalMedia 8G Fiber (DM 8G Fiber) is 1000 ft (300 m) using CRESFIBER8G multimode fiber optic cable, or 500 ft (150 m) using CRESFIBER (legacy), or third-party OM3 multimode fiber optic cable.

6. The maximum cable length for DigitalMedia 8G Single-Mode Fiber (DM 8G SM Fiber) is 7.5 miles (12 km) using CRESFIBER8G-SM or third-party G.652.D (or better) single-mode fiber optic cable.

7. The maximum cable length for DigitalMedia CAT (DM CAT) is 450 ft (137 m) using DM-CBL DigitalMedia Cable. Actual cable length depends upon multiple factors. Up to two DM Repeaters (Model DM-DR) may be required.

8. The maximum cable length for DigitalMedia Fiber (DM Fiber) is 1000 ft (300 m) using CRESFIBER (legacy), CRESFIBER8G, or third-party OM2/OM3 duplex multimode fiber optic cable.

9. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. All wire and cables are sold separately.

10. Streaming output supports 2-channel stereo audio only. Multichannel surround sound audio sources cannot be streamed unless downmixed to stereo. Stereo downmix capability requires a “DSP” type DM switcher input card, sold separately.

11. Any HDMI input can support a DVI or Dual-Mode DisplayPort signal using a suitable adapter or interface cable.

12. Item(s) sold separately.

13. Control of third-party HDBaseT devices using CEC is only supported via “4K” DM 8G+ input and output cards.

14. DVI output is supported via an HDMI output port using a suitable adapter or interface cable. CBL-HD-DVI interface cables are available separately.

15. Manages the routing of USB HID signals between peripheral DM devices and input cards that are equipped with USB HID ports. Also programmable to manage the routing of USB signals between Crestron USB over Ethernet Extender modules (USB-EXT-DM, sold separately). Refer to the USB-EXT-DM spec sheet for more information.

16. For external DMNet power, use a Crestron CNPWS-75, C2N-SPWS300, or other Cresnet power supply as required. Do not interconnect DMNet with Cresnet.

Manufacturer: Crestron, Description: Pro 3 /3 Series Control Processor, Part Number: 6504880

Control Engine

Crestron 3-Series; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs

Memory

SDRAM 1 GB

Flash 4 GB Memory Card Supports SD and SDHC cards up to 32 GB External Storage Supports USB mass storage devices up to 1 TB

Communications

Ethernet

10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, BACnet/IP [2], IPv4 or IPv6, Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail client

Control Subnet 10/100/1000 Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP server, DNS Server, port forwarding, Isolation Mode

Cresnet Cresnet master mode

USB Supports USB mass storage class devices via rear panel USB 2.0 host port, supports computer console via front panel USB 2.0 device port

RS-232/422/485 For 2-way device control and monitoring, all ports support RS-232 up to 115.2k baud with software handshaking, two ports also support hardware handshaking, RS-422, and RS-485

IR/Serial Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud https://www.crestron.com/products/model/CRESFIBER8G-NP https://www.crestron.com/products/model/CRESFIBER-NP https://www.crestron.com/products/model/CRESFIBER8G-SM-P https://www.crestron.com/products/model/DM-CBL-NP https://www.crestron.com/products/model/DM-DR https://www.crestron.com/products/model/CRESFIBER-NP https://www.crestron.com/products/model/CRESFIBER8G-NP https://www.crestron.com/dmresources https://www.crestron.com/products/model/CBL-HD-DVI https://www.crestron.com/products/model/USB-EXT-DM https://www.crestron.com/products/model/cnpws-75 https://www.crestron.com/products/model/c2n-spws300 https://www.crestron.com/products/model/SW-3SERIES-BACNET

Connectors & Card Slots S1 – S3 (3) 3-Series control card expansion slots

COM 1 – 2

(2) 5-pin 3.5 mm detachable terminal blocks;

Bidirectional RS-232/422/485 ports [3];

Up to 115.2k baud; hardware and software handshaking support

COM 3 – 6

(4) 3-pin 3.5 mm detachable terminal blocks;

Bidirectional RS-232 ports [3];

Up to 115.2k baud; software handshaking support

IR - SERIAL

OUTPUT 1 – 8

(2) 8-pin 3.5 mm detachable terminal blocks;

Comprises (8) IR/Serial output ports;

IR output up to 1.2 MHz;

1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud

RELAY

OUTPUT 1 – 8

(2) 8-pin 3.5 mm detachable terminal blocks;

Comprises (8) normally open, isolated relays;

Rated 1 Amp, 30 Volts AC/DC;

MOV arc suppression across contacts

LAN

(1) 8-pin RJ45 jack;

10Base-T/100Base-TX/1000Base-T Ethernet port [3];

Connects to the customer's LAN

CONTROL

SUBNET

(1) 8-pin RJ45 jack;

10Base-T/100Base-TX/1000Base-T Ethernet port [3];

Provides a dedicated local network for Crestron devices

USB (1) USB Type A female;

USB 2.0 port for storage devices

MEMORY (1) SD memory card slot;

Accepts one SD or SDHC card up to 32 GB for memory expansion

I/O 1 – 8

(1) 9-pin 3.5 mm detachable terminal block;

Comprises (8) "Versiport" digital input/output or analog input ports (referenced to GND) [3];

Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V low/0 and <1.875V high/1;

Digital Output: 250 mA sink from maximum 24 Volts DC, catch diodes for use with "real world" loads;

Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k Ohms with pull-up resistor disabled;

Programmable 5 Volts, 2k Ohms pull-up resistor per pin

NET

(1) 4-pin 3.5 mm detachable terminal block;

Cresnet master port, outputs power to Cresnet devices [3];

See "Power" section for additional specifications

100-240V~2.4A 50/60Hz

(1) IEC 60320 C14 main power inlet;

Mates with removable power cord, included

G (1) 6-32 screw;

Chassis ground lug

COMPUTER

(front)

(1) USB Type B female;

USB 2.0 computer console port (6 ft cable included);

For setup only

LCD Display Display Type TFT active matrix color LCD Size 2.8 inch (72 mm) diagonal Resolution 320 x 240 pixels Functions Displays configuration menus, control port activity, and other system information

Controls & Indicators PWR (1) Green LED, indicates operating power supplied from AC line NET (1) Amber LED, indicates communication with the Cresnet system

MSG (1) Red LED, indicates control system has generated an error message HW-R (1) Recessed pushbutton for hardware reset SW-R (1) Recessed pushbutton for software reset

CNPS FAULT (1) Red LED and (1) pushbutton, LED indicates an excessive Cresnet load detected at the NET port, pushbutton resets the fault indication

SLOT 1 – 3 (3) Green LEDs, indicate control cards are inserted in the corresponding slots Nav Pad (1) 5-way navigation pad for menu navigation and parameter adjustment HOME (1) Pushbutton, returns to the home menu BACK (1) Pushbutton, steps menu back one level

LAN (rear) (2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity

CONTROL

SUBNET (rear)

(2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity

Power Main Power 2.4 Amps @ 100-240 Volts AC, 50/60 Hz

Available Cresnet Power 75 Watts (3.125 Amps @ 24 Volts DC)

Environmental Temperature 41° to 113° F (5° to 45° C) Humidity 10% to 90% RH (non-condensing)

Heat Dissipation 45 BTU/hr with no Cresnet devices, no control cards;

71 BTU/hr with full Cresnet load, no control cards;

See individual control card spec sheets for additional specifications

Enclosure Chassis Metal, black finish, vented top and sides Faceplate Extruded metal, black finish, polycarbonate label overlay Mounting Freestanding or 2 RU 19-inch rack-mountable (adhesive feet and rack ears included)

Dimensions Height 3.47 in (89 mm) without feet Width 17.28 in (439 mm), 19.00 in (483 mm) with rack ears Depth 10.13 in (258 mm)

Weight

5.0 lb (2.3 kg)

Manufacturer: Crestron, DMC-4K-HD-HDCP2/4K HDMI Input Card for DM Switcher, Part Number 6507421

Video Input Signal Types HDMI w/Deep Color, 3D, & 4K (DVI & Dual-Mode DisplayPort compatible [1]) Output Signal Types HDMI w/Deep Color, 3D, & 4K (DVI compatible [1])

Maximum Resolutions

Scan Type Resolution Frame

Rate Color Sampling

Color Depth

Progressive

4096x2160 DCI 4K 3840x2160 4K UHD

24 Hz 4:4:4 30 bit

30 Hz 4:4:4 24 bit

30 Hz 4:2:2 36 bit

60 Hz 4:2:0 24 bit

2560x1600 WQXGA 60 Hz 4:4:4 36 bit

1920x1080 HD 1080p 60 Hz 4:4:4 36 bit

Interlaced 1920x1080 HD 1080i 30 Hz 4:4:4 36 bit

NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz

Input Signal Types HDMI (Dual-Mode DisplayPort compatible [1])

Output Signal Types HDMI (multichannel pass-through from input), analog stereo (2-channel pass-through from input [2])

Digital Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS- ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels

Analog Format Stereo 2-channel

Digital-To-Analog Conversion 24-bit 48 kHz

Analog Performance

Frequency Response: 20 Hz to 20 kHz ±0.5 dB;

S/N Ratio: >95 dB, 20 Hz to 20 kHz A-weighted;

THD+N: <0.005% @ 1 kHz;

Stereo Separation: >90 dB

Analog Volume Adjustment -80 to 0 dB

Communications

USB Supports signal extension of USB HID class devices, expandable to support virtually any USB 1.1 or 2.0 device using Crestron USB-EXT-DM USB over Ethernet Extenders [3]

HDMI HDCP 2.2, EDID, CEC

NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI devices and a control system

Connectors

HDMI OUT

(1) 19-pin Type A HDMI female;

HDMI digital video/audio output;

(DVI compatible [1])

HDMI IN

(1) 19-pin Type A HDMI female;

HDMI digital video/audio input;

(DVI and Dual-Mode DisplayPort compatible [1])

USB HID

(1) USB Type B female;

USB device port for connection to the USB host interface of a computer or other USB HID-compliant host

AUDIO OUT

(2) RCA female;

Unbalanced stereo line-level audio output [2];

Output Impedance: 100 Ohms nominal;

Maximum Output Level: 2 Vrms https://www.crestron.com/products/model/USB-EXT-DM

Construction

Plug-in card, occupies (1) DM switcher input card slot, includes metal faceplate w/black finish

Weight

8.0 oz (227 g)

Manufacturer: Crestron, Description: DMC-4K-C-HDCP2/ HDBase-T Input Card for DM Switcher, Part Number: 6507321

Maximum Cable Lengths

Resolution

Cable Type

DM-CBL-ULTRA

DigitalMedia™ Ultra Cable

DM-CBL-8G

DigitalMedia 8G™ Cable

CAT5e (or better) [1]

1080p60 Full HD

330 ft (100 m)

330 ft (100 m) 330 ft (100 m) 1920x1200 WUXGA

1600x1200 UXGA

2048x1080 DCI 2K

2560x1440 WQHD

230 ft (70 m) 165 ft (50 m) 2560x1600 WQXGA

3840x2160 4K UHD

4096x2160 DCI 4K

Input Signal Types DM 8G+ & HDBaseT w/Deep Color, 3D, & 4K

Output Signal Types HDMI w/Deep Color, 3D, & 4K (DVI compatible [5])

Rate Color Sampling

Color Depth

Progressive

4096x2160 DCI 4K 3840x2160 4K UHD

24 Hz 4:4:4 30 bit

30 Hz 4:4:4 24 bit

30 Hz 4:2:2 36 bit

60 Hz 4:2:0 24 bit

2560x1600 WQXGA 60 Hz 4:4:4 36 bit

NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz

Input Signal Types DM 8G+, HDBaseT

Output Signal Types HDMI (multichannel pass-through from input), analog stereo (2-channel pass-through from input [2])

Digital Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels

Analog Format Stereo 2-channel

Conversion 24-bit 48 kHz

Analog Performance

Frequency Response: 20 Hz to 20 kHz ±0.5 dB;

S/N Ratio: >95 dB, 20 Hz to 20 kHz A-weighted;

Analog Volume Adjustment -80 to 0 dB

Communications

DigitalMedia DM 8G+, HDCP 2.2, EDID, CEC, PoDM, PoDM+, PoDM++, Ethernet

HDBaseT HDCP 2.2, EDID, CEC, RS-232, PoE, PoE+, Ethernet

HDMI HDCP 2.2, EDID, CEC

NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDBaseT and HDMI devices and a control system

HDMI OUT (1) 19-pin Type A HDMI female;

HDMI digital video/audio output (DVI compatible [5])

DM IN

(1) 8-pin RJ45 female, shielded;

DM 8G+ input, HDBaseT compliant;

PoDM PSE port (HDBaseT PoE compatible) [3];

Connects to the DM 8G+ output of a DM transmitter or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable [1]

POE IN

(1) 8-pin RJ45 female;

PoE/PoDM input;

Connects to an IEEE 802.3af or 802.3at compliant PoDM or PoE PSE (Power Sourcing Equipment) to enable PoDM or HDBaseT PoE power sourcing via the DM IN port. Compatible with PoE+, PoDM+, and PoDM++.

Supports Crestron models DM-PSU-8, DM-PSU-16, DM-PSU-ULTRA-MIDSPAN, and CEN-SWPOE-16 [3]

AUDIO OUT

(2) RCA female;

Unbalanced stereo line-level audio output [2];

Output Impedance: 100 Ohms nominal;

Maximum Output Level: 2 Vrms

Indicators

DM IN (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence

Construction

Plug-in card, occupies (1) DM switcher input card slot, includes metal faceplate w/black finish

Weight https://www.crestron.com/products/model/DM-CBL-8G-NP https://www.crestron.com/products/model/DM-CBL-ULTRA-NP https://www.crestron.com/products/model/DM-PSU-8 https://www.crestron.com/products/model/DM-PSU-16 https://www.crestron.com/products/model/DM-PSU-ULTRA-MIDSPAN https://www.crestron.com/products/model/CEN-SWPOE-16

8.0 oz (227 g)

Manufacturer: Crestron, Description: DMC-4K-HDO/4K Scaling HDMI Output Card for DM Switcher, Part Number: 6507120

Scalers

(2) 4K video scalers with motion-adaptive deinterlacing, intelligent frame rate conversion, Deep Color support, 3D to 2D conversion [2], content-adaptive noise reduction, widescreen format selection (zoom, stretch, maintain aspect-ratio, or 1:1), and video wall processing (up to 8 wide x up to 8 high using multiple cards)

Output Signal Types HDMI w/Deep Color & 4K (DVI compatible [1])

Scan Type Resolution Frame Rate

Color Sampling

Color Depth

Progressive

4096x2160 DCI 4K or 3840x2160 4K UHD

24 Hz 4:4:4 30 bit

30 Hz 4:4:4 24 bit

30 Hz 4:2:2 36 bit

60 Hz 4:2:0 24 bit

2560x1600 WQXGA 60 Hz 4:4:4 36 bit

1920x1080 HD 1080p 60 Hz 4:4:4 36 bit

Interlaced (Input only) 1920x1080 HD 1080i 30 Hz 4:4:4 36 bit

NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz

Output Signal Types HDMI, Analog Stereo [4]

Digital Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, Analog Formats Stereo 2-channel [4]

Conversion 24-bit 48 kHz

Analog Performance

Frequency Response: 20 Hz to 20 kHz ±0.5 dB;

S/N Ratio: >95 dB, 20 Hz to 20 kHz A-weighted;

Analog Volume Adjustment -80 to 0 dB

Communications

HDMI HDCP 2.2, EDID, CEC

NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI devices and a control

HDMI

(2) 19-pin Type A HDMI, female;

Comprises (2) HDMI digital video/audio outputs;

(DVI compatible [1])

L, R

(2) 5-pin 3.5 mm detachable terminal blocks;

Comprises (2) balanced/unbalanced stereo line-level outputs [4];

Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;

Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced

Plug-in card, occupies (1) DM switcher output card slot, includes metal faceplate w/black finish

6.2 oz (176 g)

Manufacturer: Crestron Description: DMC-4K-CO-HD-HDCP2/HDBase-T Output Card for DM Switcher, Part Number 6507483

DM-CBL-ULTRA

DigitalMedia™ Ultra Cable

DM-CBL-8G

DigitalMedia 8G™ Cable

CAT5e (or better) [1]

1080p60 Full HD

330 ft (100 m)

330 ft (100 m) 330 ft (100 m) 1920x1200 WUXGA

1600x1200 UXGA

2048x1080 DCI 2K

2560x1440 WQHD

230 ft (70 m) 165 ft (50 m) 2560x1600 WQXGA

Output Signal Types DM 8G+ & HDBaseT w/Deep Color, 3D, & 4K; HDMI w/Deep Color, 3D, & 4K (DVI compatible [3])

Rate Color Sampling

Color Depth

Progressive 4096x2160 DCI 4K 3840x2160 4K UHD

24 Hz 4:4:4 30 bit

30 Hz 4:4:4 24 bit

30 Hz 4:2:2 36 bit

60 Hz 4:2:0 24 bit

2560x1600 WQXGA 60 Hz 4:4:4 36 bit

NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz

Output Signal Types DM 8G+, HDBaseT, HDMI

Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels

DigitalMedia DM 8G+, HDCP 2.2, EDID, CEC, PoDM, PoDM+, PoDM++, Ethernet

HDBaseT HDCP 2.2, EDID, CEC, RS-232, PoE, PoE+, Ethernet

HDMI HDCP 2.2, EDID, CEC

NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI and HDBaseT devices and a control system

Connectors

DM OUT

(2) 8-pin RJ45 female, shielded;

Comprises (2) DM 8G+ outputs, HDBaseT compliant;

PoDM PSE port (HDBaseT PoE compatible) [2];

Each connects to the DM 8G+ input of a DM receiver or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable [1]

POE IN

(2) 8-pin RJ45 female;

Comprises (2) PoE/PoDM inputs;

Each connects to one port of an IEEE 802.3af or 802.3at compliant PoDM or PoE PSE (Power Sourcing Equipment) to enable PoDM or HDBaseT PoE power sourcing via the corresponding DM OUT port. Compatible with PoE+, PoDM+, and PoDM++. Supports Crestron models DM-PSU-8, DM-PSU-16, DM-PSU-ULTRA- MIDSPAN, and CEN-SWPOE-16.[2]

HDMI

(1) 19-pin Type A HDMI, female;

HDMI digital video/audio output (DVI compatible [3]);

Outputs same signal as the first (left) DM OUT port

Indicators

DM OUT (4) LEDs, green LEDs indicate DM link status, amber LEDs indicate video and HDCP signal presence, for each corresponding DM 8G+ output

Plug-in card, occupies (1) DM switcher output card slot, includes metal faceplate w/black finish

6.2 oz (176 g)

Manufacturer: Crestron, Description: TSW-1060-NC-B-S /10.1 Inch Touch Panel, Part Number: 6507847 https://www.crestron.com/products/model/DM-CBL-8G-NP https://www.crestron.com/products/model/DM-CBL-ULTRA-NP https://www.crestron.com/products/model/dm-psu-8 https://www.crestron.com/products/model/dm-psu-16 https://www.crestron.com/products/model/DM-PSU-ULTRA-MIDSPAN https://www.crestron.com/products/model/DM-PSU-ULTRA-MIDSPAN https://www.crestron.com/products/model/CEN-SWPOE-16

Touch Screen Display Display Type TFT active matrix color LCD Size 10.1 inch (257 mm) diagonal Aspect Ratio 16:10 WXGA Resolution 1280 x 800 pixels Brightness 400 nits (cd/m²) Contrast 950:1 Color Depth 24-bit, 16.7M colors Illumination Edgelit LED w/auto-brightness control Viewing Angle ±80° horizontal, ±80° vertical Touch Screen Projected capacitive, 5-point multi-touch capable

Buttons

Hard Keys (5) Projected capacitive pushbuttons, backlit w/auto-brightness control, per-button show/hide (backlight enable/disable), pre-labeled with icons for “Power”, “Home”, “Lights”, “Up”, and “Down”

Reset (1) Miniature pushbutton on rear panel for hardware reset

Graphics Engine

Crestron Smart Graphics, multi-language web browser [1], multi-language on-screen keyboard, screensaver, single scalable streaming video window, native Sonos app [1], native room scheduling application [4], setup and diagnostics via web browser or onscreen UI

Languages

Smart Graphics Arabic, Chinese (Simplified), Chinese (Traditional), Czech, Danish, Dutch, English (UK), English (US), Finnish, French, German, Greek, Hebrew, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Portuguese (Brazilian), Romanian, Russian, Slovak, Spanish, Swedish, Thai

On-Screen Keyboard

Arabic, Chinese (Simplified), Croatian, Czech, Danish, Dutch, English (UK), English (US), Finnish, French (Canada), French (Switzerland), German, Hebrew, Hungarian, Italian, Japanese, Norwegian Bokmal, Polish, Portuguese, Russian, Serbian, Spanish, Swedish, Turkish

Voice Recognition

Afrikaans (South Africa); Chinese, Mandarin (China, Simplified); Chinese, Mandarin (Hong Kong, Simplified);

Chinese, Mandarin (Taiwan, Traditional); Chinese, Yue (Hong Kong, Traditional); Czech (Czech Republic); Dutch (Netherlands); English (Australia); English (Canada); English (Generic); English (India); English (New Zealand);

English (South Africa); English (UK); English (US); French (France); German (Germany); isiZulu (South Africa);

Italian (Italy); Japanese (Japan); Korean (South Korea); Polish (Poland); Portuguese (Brazil); Russian (Russia); Spanish (Spain); Turkish (Turkey)

Web Browser

Arabic, Bulgarian, Catalan, Chinese, Croatian, Czech, Danish, Dutch, English, Filipino, Finnish, French, German, Greek, Hebrew, Hindi, Hungarian, Indonesian, Italian, Japanese, Korean, Latvian, Lithuanian, Norwegian Bokmal, Pashto, Persian, Polish, Portuguese, Romanian, Romansh, Russian, Serbian, Slovak, Slovenian, Spanish, Swedish, Thai, Turkish, Ukrainian, Vietnamese

Room Scheduling [4]

Chinese (Simplified), Chinese (Traditional), Danish, Dutch (Netherlands), English (US), English (UK), French, German, Hebrew, Italian, Japanese, Korean, Norwegian, Portuguese (Brazil), Portuguese (Portugal), Russian, Spanish, Swedish

Memory

RAM 2 GB DDR3L

Storage Firmware/Application: 4 GB Class 10 microSD card;

System: 4 GB eMMC

Maximum Project Size 600 MB

Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), IEEE 802.1X, SNMP, IPv4 or IPv6, IEEE 802.3at compliant

USB USB 2.0 host for room availability hallway sign [3,4] Bluetooth Crestron PinPoint proximity detection beacon [2,5]

Streaming Decoder Video Formats H.264 (MPEG-4 part 10 AVC), MJPEG Audio Formats AAC stereo Bitrates Up to 25 Mbps (20 Mbps maximum recommended)

Streaming Input Resolutions Up to 1920x1080@30fps

Streaming Protocol RTSP

Streaming Encoder & Camera [2]

Camera Resolution 5.0 MP

Field of View 50° horizontal Video Format H.264 (MPEG-4 part 10 AVC)

Streaming Output Resolution

1280x720

Streaming Protocol RTSP, ONVIF discovery

Audio Features Built-in microphone and speakers, Rava SIP Intercom, multi-language voice recognition [1,2]

Audio Feedback Formats MP3

Connectors

LAN PoE

(1) 8-pin RJ45 connector, female, with 2 LED indicators;

10Base-T/100Base-TX Ethernet port;

PoE+ PD port;

Green and yellow LEDs indicate Ethernet port status

USB

(1) USB Type A connector, female;

USB 2.0 host port;

For optional room availability hallway sign [3,4]

Power

Power over Ethernet

IEEE 802.3at Type 2 compliant PoE+ PD (Powered Device);

- Normally requests 15 Watts from an 802.3at Type 2 PSE with LLDP advanced power management;

- With room scheduling and USB enabled, requests 18 Watts from an 802.3at Type 2 PSE with LLDP;

- Requests 30 Watts (PoE+ Class 4) from an 802.3at Type 2 PSE without LLDP;

- Requests 15.4 Watts (PoE Class 0) from an 802.3af (or 802.3at Type 1) PSE;

Note: Enabling the USB port requires use of an 802.3at Type 2 PoE+ PSE

Environmental

Temperature 32° to 112° F (0° to 45° C) Humidity 10% to 90% RH (non-condensing) Heat Dissipation 44 BTU/hr

Enclosure Construction Plastic, smooth black or white finish, edge-to-edge glass with black or white surround

Mounting

Surface mount over a 2 or 3-gang US electrical box, 2-gang European (DIN 49073) electrical box, or 2-gang UK (BS 4662) electrical box;

Lectern mount over a 2-1/5" H x 3-3/4" W (56 mm H x 96 mm W) cutout;

1-3/8" (35 mm) minimum mounting depth;

Additional wall mount, surface mount, rack mount, and tabletop options available separately

Dimensions Height 6.59 in (168 mm) Width 10.23 in (260 mm) Depth 1.52 in (39 mm) Dimensions do not include the mounting bracket

Weight

23.9 oz (675 g)

Compliance UL Listed for US & Canada, IC, CE, FCC Part 15 Class B digital device

Manufacturer: Crestron, Description: TSW-1060-TTK-B-S Table Top Kit for TSW-1060, Part Number: 6507729

Enclosure

Plastic, black or white;

38° fixed angle device opening;

Freestanding or swivel mount installation[1]

Dimensions

Height 4.12 in (105 mm);

4.25 in (108 mm) with swivel mount[1]

Width 7.86 in (200 mm) Depth 5.15 in (131 mm) With touch screen installed:

Height 5.45 in (139 mm);

5.58 in (142 mm) with swivel mount[1]

Width 10.23 in (260 mm) Depth 5.80 in (148 mm)

Weight

17.3 oz (491 g);

41.2 oz (1166 g) with touch screen installed

Manufacturer: Crestron, Description: PWE-4830RU/Touch Panel PoE Injector, Part Number: 6502429

Output Rating

350 mA maximum @ 48 Volts DC nominal;

IEEE 802.3af Class 0 PoE Power Sourcing Equipment

Power Requirements 100-250 Volts AC, 50/60 Hz

Connectors

LAN

(1) 8-wire RJ45, female;

10BaseT/100BaseTX Ethernet port;

Connects to Ethernet LAN

LAN PoE (1) 8-wire RJ45, female;

10BaseT/100BaseTX Ethernet pass-thru port and IEEE 802.3af Class 0 PoE Power Sourcing Equipment output

Main Power Input (1) IEC 320 C14 socket;

Mates with removable power cord, included

LED Indicators

POWER

(1) Tri-color LED;

Amber indicates power is available but no device is connected;

Green indicates a PoE device is connected and drawing power;

Red (flashing) indicates a non-PoE device is connected

Environmental Temperature 32° to 104°F (0° to 40°C) Humidity 10% to 90% RH (non-condensing) Heat Dissipation 28 BTU/Hr

Enclosure Black plastic, desktop

Dimensions Height 1.35 in (3.43 cm) Width 2.40 in (6.10 cm) Depth 3.98 in (10.11 cm)

6.0 oz (169 g

Manufacturer: Crestron, Description: PC-200/ Energy Monitoring Power Conditioner & Controller, Part Number: 6507243

Power Conditioner & Controller

Maximum Output Current, Total 15 Amps @ 120 Volts AC

Maximum Output Current, Per Outlet/Bank

15 Amps @ 120 Volts AC (subject to a maximum total output current of 15 Amps for all outlets combined)

Filtration 40 dB @ 100 kHz, 50 dB @ 300 kHz, with 50 Ohm load Surge Protection Modes L-G, L-N, N-G

Surge Protection Shutoff Shuts off rear outlets if surge protection is compromised

Energy Dissipation 2000 Joules per Mode Clamping Voltage 370 Volts Clamping Time 1 ns Wiring Fault Detection Shuts off rear outlets if a wiring fault is detected at the input [3] Voltage Sensing Range 90.0 to 160.0 Volts rms ±1%, measured at input Current Sensing Range 0.4 to 15.0 Amps rms ±1% (resistive), measured at input

Ambient Temperature Sensing Range -13.0° to 221.0° ±4° F (-25.0° to 105.0° ±2° C)

Under Voltage Cutoff Adjustable 90 to 110 Volts, shuts off rear outlets if input drops below set value Over Voltage Cutoff Adjustable 130 to 147 Volts, shuts off rear outlets if input exceeds set value

Over Temperature Cutoff Adjustable -13.0° to 221.0° F (-25.0° to 105.0° C), shuts off rear outlets if input exceeds set value

Turn-On Delay Adjustment 0.1 to 10.0 seconds, adjustable per each of rear outlet banks "DELAYED ON 1 – 3"

Power Line Power 15 Amps @ 120 Volts AC, 60 Hz Cresnet Power Usage 0 Watts

Communications

Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SNMP, Web Server, SMTP e-mail client, web browser setup and control, Crestron control system integration, Crestron Fusion Cloud monitoring, MyCrestron.com monitoring [2]

Cresnet Cresnet slave mode

Connectors

120V~ 15A 60Hz (1) Attached 9.8 ft (3 m) grounded AC power cord with NEMA 5-15P plug;

Line power input

SWITCHED ON 1 (2) NEMA 5-15R AC power outlets;

Locally switched 120 Volt AC power outlet bank

DELAYED ON 1 – 3

(6) NEMA 5-15R AC power outlets;

Comprises three banks of two switched 120 Volt AC power outlets;

Locally switched with adjustable turn-on delay per bank;

Remote switchable per bank

TEMP (1) 2-pin 3.5 mm detachable terminal block;

Connection for external temperature sensor (included)

Y, Z, G (1) 3-pin 3.5 mm detachable terminal block;

Cresnet slave port

LAN (1) 8-pin RJ45 jack;

10Base-T/100Base-TX Ethernet port

G (1) 6-32 screw;

Chassis ground lug

ALWAYS ON (front) (1) NEMA 5-15R AC power outlet;

Unswitched 120 Volt AC power outlet

Controls & Indicators

PWR

(1) Bi-color green/amber LED, indicates line power is present, illuminates amber when the power switch is off and while booting, illuminates green when the power switch is on and the unit is operating normally, turns amber if the rear outlets have been shut off due to a fault condition

FAULT (1) Red LED, indicates any of the following fault conditions: surge protection is compromised, line and neutral are reversed, or no ground is detected [3]

PROTECT (1) Green LED, indicates surge protection is fully functional

SHUTDOWN (1) Amber LED, indicates power to the rear outlets is shut off due to an over-voltage, under-voltage, over-temperature, line input miswire, missing ground, or compromised surge protection fault condition

HW-R (1) Recessed pushbutton, initiates a hardware reset of the internal CPU (does not affect outlets) SETUP (1) Recessed pushbutton & red LED, for touch-settable ID (TSID) and Ethernet autodiscovery

Power Switch (1) Rocker switch, "On" position initiates turn-on delay sequence to the rear panel outlets, "Off" position turns all rear outlets off immediately

THERMAL

BREAKER (rear) Disrupts power to all outlets in case of an overload condition, press to reset after overload condition is resolved

LAN (rear) (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity

Environmental Temperature 32° to 113° F (0° to 45° C) Humidity 10% to 90% RH (non-condensing)

Construction Chassis Steel, black finish Front Panel Extruded aluminum, black finish, polycarbonate label overlay Mounting 1 RU 19-inch rack-mountable (rack ears included) Temperature Sensor Adhesive or magnetic mount, 9.8 ft (3.0 m) attached lead

Dimensions Height 1.73 in (44 mm)

Width 17.32 in (440 mm);

19.00 in (483 mm) with rack ears

Depth 10.56 in (269 mm)

Weight

8.2 lb (3.8 kg)

Compliance UL 1449 Type 3 Listed

Manufacturer: Crestron Description: DM-TX-201-S/8G DM Fiber TX, Part Number: 6504168

Switcher 2x1 combination digital/analog switch, Crestron QuickSwitch HD® Input Signal Types HDMI®, DVI[2], DisplayPort Multimode[2], RGB/VGA, component[3], S-Video[3], composite[3] Output Signal Types DM 8G® Fiber (DigitalMedia™ over one multimode fiber optic strand), HDMI, DVI[2] Formats DM 8G Fiber, HDMI, DVI, HDCP content protection support, RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC, PAL

Input Resolutions, HDMI & DVI, Progressive

640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock

HDMI & DVI,

Interlaced

720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock

Input Resolutions, RGB

640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1152@60Hz

Input Resolutions, Component[3]

480i, 576i, 480p, 576p, 720p50, 720p60, 1080p24, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines), 1080p60

Composite and S- Video[3]

480i, 576i

Output Resolutions Matched to inputs

Analog-To-Digital Conversion 10-bit 165 MHz per each of 3 channels

Audio Switcher 2x1 combination digital/analog switch Input Signal Types HDMI, DisplayPort Multimode[2], analog stereo Output Signal Types DM 8G Fiber, HDMI Formats, HDMI Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES, DTS 96/24, up to 8ch PCM Formats, Analog Stereo 2-channel

Analog-To-Digital Conversion 24-bit 48 kHz

Performance (analog)

Frequency Response: 20Hz to 20kHz ±0.75dB;

S/N Ratio: >90dB, 20Hz to 20kHz A-weighted;

THD+N: <0.05% @ 1kHz;

Stereo Separation: >90dB

Communications Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP

USB Supports signal extension of USB HID class devices, expandable to support virtually any USB 1.1 or 2.0 device using Crestron USB-EXT-DM USB over Ethernet Extenders[4]

DigitalMedia DM 8G Fiber, HDCP, EDID, CEC, Ethernet

HDMI HDCP, EDID, CEC

NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI device and a control system https://www.crestron.com/resources/product_and_programming_resources/catalogs_and_brochures/online_catalog/default.asp?jump=1&model=USB-EXT-DM

LAN (1) 8-wire RJ45 female, shielded;

DM OUT MMF/SC

(1) SC female optical fiber connector;

DM 8G Fiber output ;

Connects to DM 8G Fiber input of a DM switcher, receiver/room controller, or other DM device via CresFiber 8G fiber optic cable[1]

HDMI OUT

(1) 19-pin Type A HDMI female;

HDMI digital video/audio output;

Also supports DVI[2]

PWR 24VDC 0.75A

(1) 2.1 x 5.5 mm DC power connector;

24 Volt DC power input;

PW-2407WU power pack included

Ground (1) 6-32 screw, chassis ground lug

USB HID (1) USB Type B female;

USB 2.0 device port for connection to the USB host interface of a computer or other USB HID-compliant host

HDMI IN

(1) 19-pin Type A HDMI female;

HDMI digital video/audio input;

Also supports DVI and DisplayPort Multimode[2]

RGB IN

(1) DB15HD female;

RGB (VGA), component, S-Video, or composite video input[3];

Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC, PAL;

Input Levels: 0.5 to 1.5 Vp-p with built-in DC restoration;

Input Impedance: 75 Ohms;

Sync Input Type: Autodetect RGBHV, RGBS, RGsB, YPbPr;

Sync Input Level: 3 to 5 Vp-p;

Sync Input Impedance: 1k Ohms

AUDIO IN

(1) 3.5mm TRS mini phone jack;

Unbalanced stereo line-level audio input;

Input Level: 2 Vrms maximum;

Input Impedance: 10k Ohms

Controls & Indicators LAN (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity DM OUT (1) green LED, indicates DM link status PWR (1) green LED, indicates operating power supplied via local power pack HDMI IN (1) green LED, indicates HDMI input is selected RGB IN (1) green LED, indicates RGB input is selected SETUP (1) red LED and (1) miniature recessed pushbutton for Ethernet setup RESET (1) miniature recessed pushbutton for hardware reset

Power Requirements

Power Pack 0.75 Amps @ 24 Volts DC;

100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included

Environmental Temperature 32° to 104°F (0° to 40°C) Humidity 10% to 90% RH (non-condensing) Heat Dissipation 61 BTU/Hr

Enclosure Chassis Metal, black finish, with (2) integral mounting flanges, vented sides Mounting Freestanding, surface mount, or attach to a single rack rail https://www.crestron.com/products/show_products.asp?jump=jump&model=cresfiber8g-np https://www.crestron.com/products/show_products.asp?jump=jump&model=pw-2407wu

Dimensions Height 6.47 in (165 mm) Width 7.36 in (187 mm) Depth 1.24 in (32 mm)

24.3 oz (689 g)

Manufacturer: Crestron, Description: DM-TX-201-C/8G DM Copper TX, Part Number: 6503838

Switcher 2x1 auto-switching, auto-detecting multi-format digital/analog inputs; Crestron QuickSwitch HD technology

Input Signal Types HDMI (DVI & Dual-Mode DisplayPort compatible [2]), RGB/VGA (RGBHV, RGBS, RGsB); component (YPbPr);

S-Video (Y/C); composite (NTSC, PAL) [3]

Output Signal Types DM 8G+ & HDBaseT, HDMI (DVI compatible [2])

Resolutions, HDMI, Progressive

640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165 MHz pixel clock

Resolutions, HDMI, Interlaced

720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165 MHz pixel clock

Resolutions, RGB

640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1152@60Hz

Resolutions, Component [3]

480i, 576i, 480p, 576p, 720p50, 720p60, 1080p24, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines), 1080p60

Resolutions, Composite & S- Video [3]

480i, 576i

Analog-To-Digital Conversion 10-bit 165 MHz per each of 3 channels

Audio Switcher 2x1 with auto-detecting digital/analog inputs and analog audio breakaway Input Signal Types HDMI (Dual-Mode DisplayPort compatible [2]), analog stereo

Output Signal Types DM 8G+ & HDBaseT, HDMI

Digital Formats Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES, DTS 96/24, LPCM up to 8 channels Analog Formats Stereo 2-channel

Analog-To-Digital Conversion 24-bit 48 kHz

Analog Performance

Frequency Response: 20 Hz to 20 kHz ±0.75 dB;

S/N Ratio: >90 dB, 20 Hz to 20 kHz A-weighted;

THD+N: <0.05% @ 1 kHz;

Stereo Separation: >90 dB

Communications Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP

USB Supports signal extension of USB HID class devices, expandable to support virtually any USB 1.1 or 2.0 device using Crestron USB-EXT-DM USB over Ethernet Extenders [6]; supports a TT-100 series cable caddy [7]

DigitalMedia DM 8G+, HDCP, EDID, CEC, PoDM, Ethernet HDBaseT HDCP, EDID, PoE, Ethernet

HDMI HDCP, EDID, CEC

NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI devices and a control system

Connectors

LAN (1) 8-pin RJ45 female, shielded;

10Base-T/100Base-TX Ethernet port

DM OUT

(1) 8-pin RJ45 female, shielded;

DM 8G+ output, HDBaseT compliant;

PoDM PD port (HDBaseT PoE compatible) [4,5];

Connects to the DM 8G+ input of a DM switcher, receiver/room controller, or other DM device, or to an HDBaseT device, via CAT5e or Crestron DM-CBL-8G cable [1]

HDMI OUT (1) 19-pin Type A HDMI female;

HDMI digital video/audio output (DVI compatible [2])

PWR 24VDC

0.75A

(1) 2.1 x 5.5 mm DC power connector;

24 Volt DC power input;

PW-2407WU power pack included

Ground (1) 6-32 screw;

Chassis ground lug

USB HID

(1) USB Type B female;

USB 2.0 device port for connection to the USB host interface of a computer or other USB HID-compliant host, or for connection of a Crestron TT-100 series device (Crestron Connect It) [7]

HDMI IN

(1) 19-pin Type A HDMI female;

HDMI digital video/audio input;

(DVI & Dual-Mode DisplayPort compatible [2])

RGB IN

(1) HD15 female;

Analog VGA/RGB/video input;

Signal Types: VGA, RGB, component, S-Video, or composite [3];

Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC, PAL;

Input Levels: 0.5 to 1.5 Vp-p with built-in DC restoration;

Input Impedance: 75 Ohms;

Sync Input Type: Autodetect RGBHV, RGBS, RGsB, YPbPr;

Sync Input Level: 3 to 5 Vp-p;

Sync Input Impedance: 1k Ohms

AUDIO IN

(1) 3.5 mm TRS mini phone jack;

Unbalanced stereo line-level audio input;

Input Level: 2 Vrms maximum;

Input Impedance: 10k Ohms

Controls & Indicators LAN (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity DM OUT (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence PWR (1) Green LED, indicates operating power supplied via PoDM, HDBaseT PoE, or local power pack HDMI IN (1) Green LED, indicates HDMI input is selected https://www.crestron.com/products/model/USB-EXT-DM https://www.crestron.com/products/model/tt-100 https://www.crestron.com/products/model/dm-cbl-8g-np https://www.crestron.com/products/model/pw-2407wu https://www.crestron.com/products/model/tt-100

RGB IN (1) Green LED, indicates RGB input is selected SETUP (1) Red LED and (1) recessed pushbutton for Ethernet setup RESET (1) Recessed pushbutton for hardware reset

Power

Power Pack (included)

Input: 100-240 Volts AC, 50/60 Hz;

Output: 0.75 Amps @ 24 Volts DC;

Model: PW-2407WU

Power over DM (PoDM)

IEEE 802.3at Type 1 Class 3 (12.95 W) compliant PoDM PD (Powered Device), capable of being powered by a PoDM PSE (Power Sourcing Equipment) [4]

Power over HDBaseT

IEEE 802.3at Type 1 Class 3 (12.95 W) compliant HDBaseT PoE PD (Powered Device), capable of being powered by an HDBaseT PoE PSE (Power Sourcing Equipment) [5]

Environmental Temperature 32° to 104° F (0° to 40° C) Humidity 10% to 90% RH (non-condensing) Heat Dissipation 30 BTU/hr

Enclosure Chassis Metal, black finish, with (2) integral mounting flanges, vented sides Mounting Freestanding, surface mount, or attach to a single rack rail

Dimensions Height 6.47 in (165 mm) Width 7.36 in (187 mm) Depth 1.24 in (32 mm)

25.4 oz (721 g)

Manufacturer: Crestron, Description: DM-RMC-100-S/8G DM Fiber RX & Controller, Part Number: 6503960

Input Signal Type DM 8G® Fiber (DigitalMedia™ over one multimode fiber optic strand)[1]

Output Signal Types HDMI®, DVI[2]

Formats DM 8G Fiber & HDMI w/Deep Color & 3D, DVI, HDCP content protection support

Input

Progressive

640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz,…