Misc Equipment Salient Characteristics Rev2.docx
DOCX document 24 KB Posted
- Attached to
- Kennedy Space Center - New Equipment Items
- Solicitation number
- FA252125QB053
About this file
The document is a Salient Characteristics specification for equipment procurement for the NASA LAS K-Span project by the 823 RHS, issued under Air Force Space Command Solicitation FA252125QB053. The requirement includes purchasing 10 specific equipment items with detailed technical specifications, such as a multi-process welder, pressure washer, cable pullers, hydraulic crimping tool, portable rotary hammer drill, phase meter, ground rod tester, environmental control unit, and a diesel generator. The equipment must meet or exceed the minimum specifications provided, with reference sources and part numbers included for guidance.
The solicitation requires quotes to be submitted in PDF or Word format by 30 May 2025, with mandatory inclusion of quote expiration date and accurate delivery date. Telephone responses are explicitly prohibited. The equipment specifications are highly technical, covering parameters like horsepower, power output, cooling methods, voltage ranges, capacity ratings, and specific operational capabilities for each item. The procurement is for the Kennedy Space Center's new equipment needs, focusing on specialized tools and machinery likely supporting aerospace infrastructure and maintenance operations.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 25QB053 Q and A.docx | DOCX document | |
| 25QB053 Q and A.docx | DOCX document | |
| 25QB053 Q and A.docx | DOCX document | |
| 25QB053 CSS Rev1 Final.pdf | ||
| 25QB053 Q and A.docx | DOCX document | |
| Salient Characteristics New Equipment Rev1.pdf | ||
| 25QB053 Clause Set.pdf | ||
| Salient Characteristics New Equipment.pdf | ||
| 25QB053 CSS Final.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics for Equipment Purchase For the NASA LAS K-Span project, the 823 RHS needs to purchase the following equipment with the corresponding salient characteristics listed below. Sources and part numbers are listed as a reference, although items that meet or exceed those standards are acceptable.
Required delivery date is 30 May 2025.
| Line Item |
| Qty |
| Item |
| 1 |
| 2 |
| WELDER/AIR C/POWER MULTI PAK |
| 2 |
| 1 |
| PRESSURE WASHER |
| 3 |
| 1 |
| CABLE PULLER SET |
| 4 |
| 1 |
| CRIMPING TOOL, HYDRAULIC, DIELESS |
| 5 |
| 1 |
| DRILL, HAMMER, ROTARY PORTABLE C2 |
| 6 |
| 1 |
| CABLE PULLER 6000LB PULLING FORCE |
| 7 |
| 1 |
| METER, PHASE, UP TO 75K V |
| 8 |
| 1 |
| TESTER, GROUND ROD |
| 9 |
| 2 |
| ECU 5 TON ALASKAN (RH) |
| 10 |
| 1 |
| GENERATOR, DIESEL 5500 WATT |
1. WELDER/AIR C/POWER MULTI PAK (Reference Source and Part Number: Airgas MIL907549001) MINIMUM SPECIFICATIONS:
1.1. Horsepower: 27 hp
1.2. Number of Cylinders: 2 Cylinder
1.3. Peak Auxiliary Power: 12,000 W
1.4. Continuous Auxiliary Power: 10,500 W
1.5. Cooling Method: Air Cooled
1.6. Process:
1.6.1. Stick (SMAW)
1.6.2. MIG (GMAW)
1.6.3. Flux Cored (FCAW)
1.6.4. TIG (GTAW)
1.6.5. Air Carbon Arc (CAC-A) Cutting & Gouging
1.7. Output DC Amps Max: 330
2. PRESSURE WASHER (Reference Source and Part Number: Ultimate Washer E4032KLDGE) MINIMUM SPECIFICATION:
2.1. 7 GPM
2.2. 3200 PSI
2.3. Gasoline fueled
2.4. 10 HP engine
2.5. Hoses and attachments included
2.6. Portable
3. CABLE PULLER SET (Reference Source and Part Number: NCT 63150 SP) MINIMUM SPECIFICATION:
3.1. Includes: 2 1/2 in, 3 in, 3 1/2 in, 4 in Slip-In and Screw-On Couplings, 3 ft Boom Tube, 4 ft Boom Tube, 6001 Super Tugger, Boom Mount, Elbow Unit, Floor Mount, Force Gauge and Vise Chains, Mobile Carriage, Nose Unit, Storage Trays
3.2. 1.5 HP
3.3. 7.5 ft/min
3.4. 17.8kN @ 4,000lbs
4. CRIMPING TOOL, HYDRAULIC, DIELESS (Reference Source and Part Number: DMC tool 5120014116994) MINIMUM SPECIFICATION:
4.1. Minimum Pipe diameter: 1/16 in
4.2. Max pipe diameter: 1/5 in
4.3. 12T Crimper
5. DRILL, HAMMER, ROTARY PORTABLE C2 (Reference Source and Part Number: Grainger 48UT38 - Mfr. 2717-20) MINIMUM SPECIFICATION:
5.1. Capable of 1 inch bit size
5.2. Rotary Hammer operation
5.3. Battery powered
5.4. 2 foot pounds of impact energy
5.5. 1330 RPM
5.6. 4800 BPM
5.7. Autostop kickback control
6. CABLE PULLER 6000LB PULLING FORCE (Reference Source and Part Number: Grainger 454N82) MINIMUM SPECIFICATIONS:
6.1. Cable Capacity: 1200 ft with (2) 90° Bends; 3 x 1000 MCM Copper Cables; 4 x 500 MCM Copper Cables; 4 x 750 MCM Copper Cables; 750 ft with (4) 90° Bends; 800 ft with (3) 90° Bends
6.2. Pulling Speed at Max. Continuous Pulling Force: 7 fpm
6.3. Frequency:1 Hz
6.4. Horsepower: 1-1/2 hp
6.5. Minimum continuous pulling force 6,000 lbf
7. METER, PHASE, UP TO 75K V (Reference Source and Part Number: Jlmatthews Hastings 6702) MINIMUM SPECIFICATIONS:
7.1. Indicator Type: Dial w/pointer or digital read-out
7.2. Accuracy In Percent: -2.000 to +2.000 at full scale single indicator single range
7.3. Voltage: Reads up to at least 75 KV
7.4. Measurement Range: +0.0 to 133.0 ohms single indicator single range
8. TESTER, GROUND ROD (Reference Source and Part Number: Grainger 463T92) MINIMUM SPECIFICATIONS:
8.1. CAT Safety Rating: CAT IV 600V
8.2. Leakage Current Range: 0.2 mA to 40 A
8.3. Maximum Ground Resistance Measurement: 1,500 ohm
8.4. Minimum Ground Resistance Measurement: 0.03 ohm
8.5. Resistance Accuracy: Low Range ±1.5%; High Range ±25%
8.6. IP Rating: IP40
8.7. Jaw Capacity: 1.3 in
8.8. Operating Frequency: 128 Hz; 2,083 Hz; 50 Hz; 60 Hz
9. ECU 5 TON ALASKAN (RH) (Reference Source and Part Number: Native Instinct AK-ECU-5T) MINIMUM SPECIFICATIONS:
9.1. Manufacturer Information:
9.2. AK-ECU-5T-1 0GC93 AKS INDUSTRIES INC
9.3. Technical Specification:
| 9.4. CAPACITY RATING | 5.0 TONS NOMINAL |
| 9.5. FREQUENCY RATING | 50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM |
| 9.6. PART NAME ASSIGNED BY CONTROLLING AGENCY | 5.0 TON ENVIRONMENTAL CONTROL UNIT |
| 9.7. PHASE | THREE |
| 9.8. SPECIAL FEATURES | UNIT COMES WITH ONE COMMERCIAL TECH MANUAL |
| 9.9. VOLTAGE RATING | 120.0 VOLTS MINIMUM AND 208.0 VOLTS MAXIMUM |
10. GENERATOR, DIESEL 5500-WATT (Reference Source and Part Number: Grainger 39FY95 - Mfr. 6864) MINIMUM SPECIFICATIONS:
10.1. Electric start
10.2. 5500 surge watts
10.3. 5000 rated watts
10.4. Diesel fueled
10.5. Hour meter
10.6. Durable welded frame
10.7. Integrated lifting eye
10.8. Voltage 120/240
10.9. Engine displacement 435 cc
10.10. 12 gallon fuel capacity
File details come from the government source that posted it. Updated .