DD_1423_DIDS.pdf

CONTRACT DAT A REQUIREMENTS LIST Form Approved

( 1 Data Item) 0MB No. 0704-0188

The public reporting burden for this collectk>n of information is estimated to average 110 hours per response, including the time for r•viewing instructions, searching existing data sources, gathering and maintaining th• data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid 0MB control number. Please do not return your form to the above organization. Send <:ompleted form to the Government lnuing Contracting Officer for the Contract/PR No. IJsted in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

A(FY 18) TDP TM X OTHER --- --

D. SYSTEM/ITEM

I

E. CONTRACT/PR NO. F. CONTRACTOR

High Voltage Resistive Divider

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

AOOl Commercial-Off-The-Shelf (COTS) Manual

4. AUTHORITY (Data Acquisition Document No.)

5. CONTRACT REFERENCE 8. REQUIRING OFFICE

D1-TMSS-80527C PD 18E-187A-DC Atch AFLCMC/WNME

7. DD 250 REQ 9. DIST STATEMENT 10.FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

NIA

REQUIRED ASREQ SeeBLK 16 b. COPIES

8. APP CODE 11. AS OF DATE 13. DATE OF SUBSEQUENT a. ADDRESSEE Final

NIA

D

ASREQ

SUBMISSION Draft

SeeBLK 16 Rog Repro

16. REMARKS

BLK 9: The following information shall be included on the manuals:

DISTRIBUTION STATEMENT D: DoD and US DoD contractors only.

Blk 13: Concurrent with delivery of production units, contractor shall furnish and pack 1 set of the manuals with each unit. Manuals shall be on CD/DVD in indexed Ship with Unit 2 Portable Document Format (iPDF). Ship with unit.

15.TOTAL 0 2 0

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

CAPUANO.FRANK. Olllllllw' .... t,'

BOHUS.JAMES.J. Digitally signed by CAPlW«).FANl(.R 1403ll»668

R.1403209658 l;IN:�o-U.S.�OU"OoO.-"'<I. 11/20/17 SOHUS.JAMES.J.1267714289 11/22/2017c,u,,,tJ!N',�.FRAJ«A1<4031Qll0U

1267714289 Date: 2017.11.22 12:45:48 -05'00' 0...:2011.11.JO 14:,7il346'00

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page of Pages

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

CONTRACT DAT A REQUIREMENTS LIST Form Approved

(1 Data Item) 0MB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 11 O hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department oi Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid 0MB control number. Please do not retum your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. liated in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

A(FY 18) TOP TM

X OTHER

D. SYSTEM/ITEM

I

E. CONTRACT/PR NO. F.CONTRACTOR

High Voltage Resistive Divider

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

A002 Calibration Certificate/Report

4. AUTHORITY (Data Acquisition Document No.)

5. CONTRACT REFERENCE 6. REQUIRING OFFICE

D1-QCIC-80798C PD 18E-187A-DC Atch AFLCMC/WNME

7. DD 250 REQ 9. DIST STATEMENT 10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

NIA

REQUIRED ASREQ SeeBLK 16 b. COPIES

B. APP CODE 11. AS OF DATE 13. DATE OF SUBSEQUENT a. ADDRESSEE Final

NIA

D

ASREQ

SUBMISSION Draft

See BLK 16 Reg Repro

16. REMARKS

BLK II & 12: Concurrent with delivery of production units, one ( 1) copy of the calibration certificate shall accompany the production unit. Ship with Unit 2

15. TOTAL 0 2 0

G. PREPARED BY H.DATE I. APPROVED BY J. DATE

CAPUANO.FRAN __ ,, Digitally signed by CN>UANO.FRANK.ll. lC320ile5a

J)N: ,,..1.19, Pll.S. � --000, Oll"'f'KI, 11120117 BOHUS.JAMES.J.1267714289 l;IOHUS.JAMES.J.1267714289 11/2212017 K.R.1403209658 Ml'IIJ5AF,,::n,,CN>UN«)J'P.ANltR.1"'°3208lo58 Dara: 2017.11.2212:46:06-05'00 0..:2017.11.2014: ... :1(1-05'00'

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page of Pages

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

DATA ITEM DESCRIPTION

Title: COMMERCIAL OFF-THE-SHELF (COTS) MANUALS AND ASSOCIATED

SUPPLEMENTAL DATA

Number: DI-TMSS-80527C Approval Date: 20110812 AMSC Number: 9207 Limitation: No DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: TM

Applicable Forms: None

Use/relationship: Commercial Off-the-Shelf Manuals may be used as is or with supplementation to support COTS equipment used by DOD. This DID is used to:

a. Acquire sample COTS manuals for evaluation.

b. Acquire COTS manuals which have been evaluated and found to be acceptable.

c. Acquire associated supplemental data, if required.

This DID contains format, content, and intended use information for the data deliverable(s) resulting from the work described in MIL-PRF-32216.

This DID supersedes DI-TMSS-80527B, dated 17 Oct 2006.

Requirements:

1. Content. The manual shall contain all technical information on the assembly, installation, operation, parts, and maintenance of commercial equipment.

2. Evaluation. The manual shall be evaluated using the criteria found in MIL-PRF-32216.

3. Supplementation. The manual may be supplemented with additional data to comply with contract. Supplemental data shall be prepared in accordance with MIL-PRF-32216.

4. Format. The basic manual shall be in the contractor's format. Supplemental data shall be in the format specified by the contracting activity.

5. Digital files. Interactive Electronic Technical Manuals (IETMs) or PDFs are preferred for electronic COTS manuals.

6. PDF Files. PDF files shall be searchable, capable of having links added, and have fonts embedded.

7. IETMs. IETMs shall meet the general style and format and user interface requirements in MIL-PRF-87268 or MIL-STD-40051-1 (Army only) or MIL-STD-3031 (Army only).

8. Paper manuals. If paper manuals are acquired, the data shall be clearly legible and on paper of sufficient quality for long term use.

DATA ITEM DESCRIPTION

Title: CALIBRATION CERTIFICATE/REPORT

Number: DI-QCIC-80798C Approved Date: 20170123 AMSC Number: F9766 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Preparing Activity: 36 Project Number: QCIC-2017-003

Applicable Forms: N/A

Use/Relationship: The Calibration Certificate/Report documents calibration certificates or reports accompanying the calibrations performed on Department of Defense (DoD) test, measurement, and diagnostic equipment.

a. This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.

b. This DID is applicable to contracts requiring calibration of test equipment prior to delivery. This DID is consistent with ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories, requirements for calibration reports or certificates.

(Copies of this document are available online at http://www.iso.org.)

c. This DID supersedes DI-QCIC-80798B.

Requirements:

1. Reference documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.

2. Format. Contractor format is acceptable.

3. Content. The calibration certificate or report shall include:

a. Title (e.g., calibration certificate or calibration report);

b. The name and address of the laboratory and the location where the calibrations were carried out, if different from the address of the laboratory;

c. Unique identification of the calibration certificate or test report (such as the serial number), and on each page an identification in order to ensure that the page is recognized as a part of the test report or calibration certificate, and a clear identification of the end of the calibration certificate or test report;

d. The name and address of the client or customer;

e. Identification of the method used;

http://www.iso.org/

f. A description of, the condition of, and the unambiguous identification of the item(s) tested or calibrated;

g. The date of receipt of the test or calibration item(s) where this is critical to the validity and application of the results, and the date(s) of performance of the test or calibration;

DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.

h. Reference to the sampling plan and procedures used by the laboratory or other bodies where these are relevant to the validity or application of the results;

i. The test or calibration results with, where appropriate, the units of measurement;

j. The name(s), function(s) and signature(s) or equivalent identification of person(s) authorizing the calibration certificate or test report;

k. Where relevant, a statement to the effect that the results relate only to the items tested or calibrated;

l. The conditions (e.g., environmental) under which the calibrations were made that have an influence on the measurement results;

m. The uncertainty of measurement or a statement of compliance with an identified metrological specification or clauses thereof;

n. Evidence that the measurements are traceable.

End of DI-QCIC-80798C.