QUESTIONS AND ANSWERS FOR F3C2MX4107AW01.pdf
PDF 94 KB Posted
- Attached to
- Mobile Shelving Units
- Solicitation number
- F3C2MX4107AW01
About this file
This document contains Questions and Answers related to the federal contract opportunity for Mobile Shelving Units, Solicitation Number F3C2MX4107AW01. The government is requesting 3 rolling shelving units measuring approximately 49 inches wide, 17 feet long, and 84 inches high, with 3 shelves per unit and mechanical handles to control the movement. The units will have physical stops to prevent derailment. The government also requires 2 stationary shelving units measuring 24 inches wide, 99 inches long, and 84 1/8 inches tall. The overall construction cannot exceed 19 feet 11 3/16 inches by 17 feet 4 inches and 90 3/16 inches tall, excluding the handles. The vendor will be responsible for supplying, assembling, and installing the units, which will be warranted for at least one year. The government notes that funds are not currently available, and the solicitation may be cancelled at any time.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Pricing Listing Sheet_Mobile Shelving Units.xlsx | XLSX spreadsheet | |
| Final_Combo_Rolling Shelves.pdf | ||
| Statement of Objectives.pdf | ||
| Final_Combo_Rolling Shelves.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
QUESTIONS AND ANSWERS FOR
F3C2MX4107AW01 - Mobile Shelving Unit
• Do you have a drawing of the room layout?
o Not currently available
• How many faces of shelving on the carriages/Number of shelves per unit?
o Contractors will construct 3 rolling shelves with the ability to roll and lock, that measure Approximately 49 inches wide approximately 17 ½ long and an approximate of 84 inches high.
These shelves will have a mechanical handle on one end to control the movement of each shelving units. Units or tracks will have a physical stop preventing the shelving from inadvertently becoming derailed from the track at each end.
There will be 3 shelves per unit without a divider in the middle to utilize the full shelf from front to back Shelves should be solid.
• What are the widths (opening) of each section on the carriages/ Width, depth, and height of the carriages?
o Contractors will construct 3 rolling shelves with the ability to roll and lock, that measure Approximately 49 inches wide approximately 17
½ long and an approximate of 84 inches high.
These shelves will have a mechanical handle on one end to control the movement of each shelving units. Units or tracks will have a physical stop preventing the shelving from inadvertently becoming derailed from the track at each end.
There will be 3 shelves per unit without a divider in the middle to utilize the full shelf from front to back.
• You mention locks on the carriages, do you want each carriage to have a locking pin so it can be pushed and no one can roll the carriage while it is occupied, or do you want the entire system to lock down when not in use. If you want the entire system to lock down on of the single stationary carriage will need to be mobile.
o Each carriage to have a locking pin so it can’t be actuated while it is occupied.
• What type of floor covering do you want installed on top of the wood decking? Rubber mat, carpet, no floor covering?
o Rubber mat or wood flooring. Length of the rails.
• Manual or mechanical assist?
o Mechanical assist.
• Laminate end panels, yes or no?
o No
• Do you have elevation drawings?
o Not currently available
• What is being stored?
o Test equipment and tools will be stored on the shelves.
• Is the installation location on the ground floor?
o Yes
• Is there a loading dock?
o No
• Do you have flexibility on the 60-day implementation time?
o Yes
• Length of the rails?
o Along as it takes to accommodate 3 rolling shelving units.
File details come from the government source that posted it. Updated .