Acid fume hood and wet bench Alkaline fume hood and wet bench Specs.pdf

REQUIREMENTS FOR ACID FUME HOOD AND WET BENCH:

CLIN 0001

• WAFAB INTERNATIONAL MODEL 2007 POLYPROPYLENE WET BENCH (or equal)

• 36” wide x 40” deep x 75” tall of Polypropylene construction

• Polypropylene quick dump rinser with a four sided cascading inner weir (WAFAB International P/N: QDR-4561-01 or equal)

• Compact self-contained process controller capable of implementing several different rinsing techniques with indicators of the current system status. The controller must operate under time, liquid level, resistivity or a combination. (WAFAB International P/N: MPC-301-24 VAC Process controller or equal)

• Single point measurement system for solution conductivity and resistivity, with data transmitter

• Polypropylene sink 8” x8” x8”

• Gooseneck faucet

• De-ionized water (DIW) nozzle/gun set.

• Nitrogen (N2) gas nozzle/gun set.

• Base Carboy (WAFAB International P/N: Model 2000-0518-01 or equal)

• Operations manual

• Wrapped and clean room ready

REQUIREMENTS FOR ALKALINE FUME HOOD AND WET BENCH:

CLIN 0002

• WAFAB INTERNATIONAL MODEL 2007 POLYPROPYLENE WET BENCH (or equal)

• 36” wide x 40” deep x 75” tall of Polypropylene construction

• Polypropylene quick dump rinser with a four sided cascading inner weir (WAFAB International P/N: QDR-4561-01 or equal)

• Compact self-contained process controller capable of implementing several different rinsing techniques with indicators of the current system status. The controller must operate under time, liquid level, resistivity or a combination. (Model MPC-301-24 VAC Process controller or equl)

• Polypropylene sink 8” x8” x8”

• De-ionized water (DIW) nozzle/gun set.

• Nitrogen (N2) gas nozzle/gun set.

• Base Carboy (WAFAB International P/N: Model 2000-0518-01 or equivalent)

• Operations manual

• Wrapped and clean room ready