well_3_transfer_switch_.doc

STATEMENT OF WORK

Well #3 Electrical 12-28-2015

1. GENERAL: Lahontan NFHC has a compelling need for electrical automatic transfer switch control panel work on well #3. This well is necessary for safe and reliable operation of the facility. The facility normally has four operational wells, and they are rotated with three wells running with one well as a backup.

2. DEFINITIONS:

1- Automatic Transfer Switch- Is an electrical switch that switches a load between two sources.

3. SCOPE: The facility requires the following electrical components be installed at well #3. There is an urgent and compelling need to accomplish this repair. The following is a list of components necessary to operate the well in a safe and efficient manner:

1- Replace Generator Automatic Transfer Switch with a General Electric model ZTG‑Automatic Transfer Switch ZTG 3 Pole, 4 Wire, Solid Neutral, 300 Amps, Standard automatic transfer switch, rated 480V, 60 Hz, complete with all standard equipment and housed in a NEMA Type 1 enclosure. Programmable Input/Output Module.

4. PLACE/DELIVERY AND PERIOD OF PERFORMANCE: All work will be performed on site. The address is Well #3 Highway 395, Gardnerville, NV 89410. Telephone 775-265-2425.

5. INSPECTION AND ACCEPTANCE: All work will be inspected by the technical coordinator to ensure electrical system is functioning properly.

6. GOVERNMENT FURNISHED EQUIPMENT OR MATERIALS/INFORMATION: Lahontan NFHC will not provide any equipment or materials for this job.

7. AVAILABILITY: The work will be performed inside of a permanent structure between the hours of 7a.m and 3p.m. Access to facility will be granted by hatchery personnel.

8. TECHNICAL COORDINATOR: Dan Boone

775-265-2425 Ext:30

Daniel_Boone@fws.gov