F10142472___DWG1.pdf
PDF 241 KB Posted
- Attached to
- Fermilab -Fabrication of Thermal Straps
- Solicitation number
- 364131-RK
About this file
This document is a technical drawing for an SSR2 LTTS to Beamline Intercept thermal strap component, created for the Fermi National Accelerator Laboratory. The drawing specifies a precision-engineered copper component with detailed dimensional specifications, including precise radii, hole placements, and material requirements. The drawing indicates the part is made from Oxygen Free High Conductivity Copper (UNS C10200), with specific tolerances ranging from ±0.12 to ±1°, and requires the flexible portion to provide thermal conductance >0.16 W/°C at 30°C. The drawing was developed by the Technical Division - Design and Drafting, with design work completed on 08-Feb-2022 and approvals finalized on 22-Feb-2022, and is part of the PIP-II Complex Upgrades project.
View the file
Other files
Show all 20
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NOTES: (UNLESS OTHERWISE SPECIFIED)
1. PART MUST BE FREE OF DIRT, GREASE, OIL AND CHIPS.
2. PART TO BE FREE OF ALL SHARP EDGES CORNERS AND BURRS.
3. TRAILING ZERO DENOTE TOLERANCE.
4. VENDOR SHALL PROVIDE ALL MATERIAL CERTIFICATIONS.
5. FLEXIBLE PORTION TO HAVE SUFFICIENT ROPE SIZE AND QUANTITY
TO PROVIDE THERMAL CONDUCTANCE FROM END BLOCK TO
END BLOCK>0.16 W/°C MEASURED AT 30°C .
6. PART TO CONFORM TO FNAL ED0006723.
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
2 0.3 0.12 N/A 1
BREAK ALL SHARP EDGES, MAX: .015
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-1994
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
DRAWN M.KRAMP DATE 08-Feb-2022 CHECKED J.COGHILL DATE 22-Feb-2022 APPROVED V.ROGER DATE 22-Feb-2022
USED ON
F10142471
MATERIAL
OXYGEN FREE HIGH CONDUCTIVITY COPPER, UNS C10200
VENDOR SPECIFIED IF DIFFERENT
GROUP: Technical Division - Design and Drafting CAGE CODE: OU5R6
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
SSR2 LTTS TO BEAMLINE INTERCEPT
SCALE SIZE DRAWING NUMBER SHEET REV
1:2 A3 F10142472 1 OF 1 -
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
- F10142472---RCD
DRAWN
APPROVED
DESCRIPTION: SSR2 LTTS TO BEAMLINE INTERCEPT
PROJECT: PIP-II_ComplexUpgrades
CATEGORY: STRAP
T E
M P
L A
T E
V E
R S
IO
N
.0
.0
A
A
B
B
C
C
D
D
A
1.6 1.6 2X2X
2X 8.89
270.0 15 ±0.5
25.4
32 ±0.5 2X 50.8
NOTE 5
42.25R
30.25R
2X 45°
54.2R
0.3 A
B
0.3 A B
6.6 ±0.25
45 ±0.5
2X 0.6
File details come from the government source that posted it. Updated .