F01-167-6621_SPI.pdf
PDF 982 KB Posted
- Attached to
- T38 Initiators
- Solicitation number
- FA8213-26-R-3058
About this file
This is a Special Packaging Instruction (SPI) document for the Initiator, Propellant Actuated item, controlled by the 406th Supply Chain Management Squadron at Hill Air Force Base. The document specifies packaging, preservation, and marking requirements for this munitions item in accordance with Military Preservation IAW MIL-STD-2073-1 and marking standards per MIL-STD-129.
The SPI prescribes two packing levels: Level A and Level B. Level B packing uses ASTM D6251 specifications with RSC (Regular Slotted Container) construction and includes cushioning (Grade II, Class B per A-A-1898), barrier bags (MIL-PRF-81705 Type I, Class I), wrap (ASTM D5486 Type I or V), and tape (3X AS required). Level A packing requires overboxing the Level B pack in a specified outer container measuring 10 x 16 inches (Level B) or 10 3/8 x 16 3/4 inches (Level B outer dimensions). The document includes detailed packaging diagrams showing item placement, cushioning requirements, and final closure procedures. All wood packaging materials must comply with International Standards for Phytosanitary Measures (ISPM No. 15) using heat-treated, debarked lumber certified by the American Lumber Standards Committee. A palletization procedure for Level B packs is provided, allowing up to 40 boxes per pallet (1083.35 lbs total) using steel strapping and edge protectors. The SPI requires valid hazard classification documentation (DOT SP 15448) to accompany each shipment.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| PackagingSOW.pdf | ||
| ItemDescription.pdf | ||
| SectionLCADPAD_26May2026.pdf | ||
| ADC_SOW.pdf | ||
| CDRLs.pdf | ||
| JFQR.pdf | ||
| AirSpec.pdf | ||
| FA821326R3058.pdf | ||
| ItemMarkingInstruction.pdf | ||
| SectionMCADPAD_26May2026.pdf | ||
| REPSHIP.pdf | ||
| Statement_of_Objectives_SOO.pdf | ||
| ES7034.pdf |
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTROLLED BY: 406 SCMS
CONTROLLED BY: GULAA-HILL AFB
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
CUI
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
NOTICE 3: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING
IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 4: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 5: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
NOTES
1. MAY PLACE UP TO 10 BAGGED ITEMS IN SHIPPING CONTAINER USING REF.-1 TO ENSURE THAT ITEMS DO NOT TOUCH
EACH OTHER OR SIDES OF OUTER CONTAINER.
2. WRAP ITEM USING REF.-3, PLACE IN BAG REF.-2 REMOVE AIR AND SEAL.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
REFER TO MIL-STD-129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
File details come from the government source that posted it. Updated .