Exhibits.pdf
PDF 102 KB Posted
- Attached to
- CAPSCREWS
- Solicitation number
- SPMYM326Q8011
About this file
This is a Contract Data Requirements List for procurement of socket head capscrews under Contract No. 6068-401, issued by the requiring office CODE 245. The contract contains two mandatory data items that the contractor must submit with the delivered material.
Data Item A001 requires submission of a Certificate of Compliance certifying quality compliance, referencing Data Item Description DI-MISC-81356A. Data Item A002 requires submission of Certification Data/Report containing chemical and mechanical certification per DI-MISC-82386. Both items must be submitted one time with the material under separate shipment numbers. Key submission requirements for A002 include: paragraphs 6 and 8 of DI-MISC-82386 do not apply; test results must be quantitative and in units specified by the specification; fastener certification must show evidence of correct specimen testing with new untested fasteners required for wedge tensile and yield strength testing; and additional requirements from the contract section on "Marking and Certification requirements for Controlled Industrial Material" apply. Payment and submission of data are governed by Clauses 252.232-7006, 252.232-7003, or 52.232-36. The document was prepared by Steve Young on 03/09/2026 and approved by Edward Walsh on the same date.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFQ 26Q8011.docx | DOCX document | |
| Combined Synopsis Solicitation 26Q8011.docx | DOCX document | |
| Clauses - Full Text Provisions and Clauses.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2Z-0357-26 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP X TM ______ OTHER______
D. SYSTEM/ITEM
SOCKET HEAD CAPSCREW
E. CONTRACT/PR NO.
6068-401
F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-82386
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
11. AS OF DATE
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY
STEVE YOUNG Ext: 3207 245.2Z
H. DATE
03/09/2026
I. APPROVED BY 245.2
3 / 1 0 / 2 0 2 6
X E D W A R D W A L S H
S i g n e d b y : W A L S H . E D W A R D . M . 1 4 1 1 0 4 8 0 3 5
J. DATE
03/09/2026
File details come from the government source that posted it. Updated .