Exhibit N - IFB - BUY AMERICAN FORM.pdf
PDF 140 KB Posted
- Attached to
- Daktronics DMS Replacement Parts and Repairs
- Solicitation number
- 300000284009709
- Issued by
- Missouri
About this file
This is a Buy American Form (Exhibit N) issued by the Missouri Department of Transportation, St. Louis District, for a Daktronics DMS Replacement Parts and Repairs procurement. The form implements the Domestic Products Procurement Act preference requirements under Missouri Revised Statutes sections 34.350-34.359. Bidders are required to certify the point of manufacture for all finished products being bid to determine eligibility for the domestic products preference. The contract covers replacement parts, technical support, and warranty services for 32 Color DMS (Dynamic Message Sign) boards currently in use within the St. Louis District's Intelligent Transportation System, with anticipated purchases needed throughout the approximate 15-year effective life of these boards. The contract period runs from the date of award through September 30, 2027, with options to renew for two additional one-year periods.
Bidders must complete one of six certification tables within the form to document product manufacturing origin: either Table 1 certifying all products are U.S. manufactured, Table 2 certifying all products are foreign-manufactured and ineligible for preference, or Tables 3-6 for item-by-item certification distinguishing between U.S.-manufactured products, foreign products ineligible for preference, foreign products qualifying under applicable trade treaties or agreements, and foreign products where only one U.S. manufacturer exists. Bidders are required to provide supporting documentation as proof of compliance and must sign the certification under penalty of class A misdemeanor for any misrepresentation. The form specifies that imported products with applied tariffs do not qualify for the preference, and "Most Favored Nation" status alone does not permit the preference unless the product enters duty and tariff-free.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| MODOT SL 0000000087SL_SUPPLIER.pdf | ||
| Missouri DOT Sole Source Letter - 2026.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MO 300-1102N (1-16)
EXHIBIT N
DOMESTIC PRODUCTS PROCUREMENT ACT (BUY AMERICAN) PREFERENCE
In accordance with sections 34.350-34.359, RSMo, the bidder is instructed to provide information regarding the point of manufacture for each of the products being bid so that the product’s eligibility for the Domestic Products Procurement Act (Buy American) Preference can be determined. This information is requested for the finished product only, not for components of the finished product. The bidder may be required to provide supporting documentation indicating proof of compliance.
Qualifying for the Domestic Products Preference:
A product qualifies for the preference if one of the following circumstances exist:
• if manufactured or produced in the U.S.; or
• if the product is imported into the U.S. but is covered by an existing international trade treaty, law, agreement, or regulation that affords the specific product the same status as a product manufactured or produced in the U.S.; or
• if only one line of products is manufactured or produced in the U.S.
Non-Domestic Product:
If the product is not manufactured or produced in the U.S. and does not otherwise qualify as domestic, then it will be considered non-domestic and not eligible for the preference.
THE BIDDER MUST COMPLETE THE FOLLOWING APPLICABLE TABLES TO CERTIFY WHETHER:
(Table 1) ALL products bid are manufactured or produced in the U.S. and qualify for the Domestic Products Procurement Act Preference; OR (Table 2) ALL products bid are manufactured or produced outside the U.S. and do not otherwise qualify for the Domestic Products Procurement
Act Preference; OR (Tables 3-6) Not all products bid fall into the prior two categories so an item-by-item certification is necessary.
The bidder is responsible for certifying the information provided on the exhibit is accurate by signing where indicated at the end of the exhibit.
TABLE 1 – ALL PRODUCTS MANUFACTURED OR PRODUCED IN U.S. (eligible for preference) Check the box to the right if ALL products bid are MANUFACTURED OR PRODUCED IN THE U.S.:
TABLE 2 – ALL PRODUCTS MANUFACTURED OR PRODUCED OUTSIDE U.S. AND DON’T QUALIFY FOR PREFERENCE (ineligible for preference) Check the box to the right if ALL products bid are MANUFACTURED OR PRODUCED OUTSIDE THE U.S. and DO NOT OTHERWISE QUALIFY for the Domestic Products Procurement Act Preference:
TABLES 3 THROUGH 6 – ITEM BY ITEM CERTIFICATION (NOT ALL PRODUCTS BID FALL INTO PRIOR TWO TABLES)
• For those line items for which a U.S.-manufactured or produced product is bid, complete Table 3.
• For those line items which are manufactured or produced outside the U.S. that do not qualify for the Domestic Products Procurement Act
Preference, complete Table 4.
• For those line items which are not manufactured or produced in the U.S., but for which there is a U.S. trade treaty, law, agreement, or regulation in compliance with section 34.359, RSMo, complete Table 5.
• For those line items which are not manufactured or produced in the U.S., but for which there is only one U.S. Manufacturer of that product or line of products, complete Table 6.
TABLE 3 – U.S.-MANUFACTURED OR PRODUCED PRODUCTS (Eligible for Preference)
• List item numbers of products bid that are U.S.-manufactured or produced and therefore qualify for the Domestic Products Procurement Act
Preference.
• List U.S. city and state where products bid are manufactured or produced.
Item # U.S. City/State Where Manufactured/Produced Item # U.S. City/State Where Manufactured/Produced
TABLE 4 -- FOREIGN-MANUFACTURED OR PRODUCED PRODUCTS (Not Eligible for Preference)
• List item numbers of products bid that are foreign manufactured or produced and do not otherwise qualify for the Domestic Products
Procurement Act Preference.
• List country where product bid is manufactured or produced.
Item # Country Where Manufactured/Produced Item # Country Where Manufactured/Produced
(Exhibit continues on next page)
MO 300-1102N (1-16)
EXHIBIT N, continued: DOMESTIC PRODUCTS PROCUREMENT ACT (BUY AMERICAN) PREFERENCE
TABLE 5 -- FOREIGN-MANUFACTURED OR PRODUCED PRODUCTS BUT U.S. TRADE TREATY, LAW, AGREEMENT, OR REGULATION APPLIES (Eligible for Preference)
• List item numbers of products bid that are foreign manufactured or produced but qualify for the Domestic Products Procurement Act
Preference because a U.S. Trade Treaty, Law, Agreement, or Regulation applies.
• Identify country where proposed foreign-made product is manufactured or produced.
• Identify name of applicable U.S. Trade Treaty, Law, Agreement, or Regulation that allows product to be brought into the U.S. duty/tariff-free.
• Identify website URL for the U.S. Trade Treaty, Law, Agreement, or Regulation.
• NOTE: As an imported product, if an import tariff is applied to the item, it does not qualify for the preference. In addition, “Most Favored
Nation” status does not allow application of the preference unless the product enters the U.S. duty/tariff-free.
Item # Country Where Proposed Foreign-Made Product is
Manufactured/Produced Name of Applicable U.S.
Trade Treaty, Law, Agreement, or Regulation
Official Website URL for the U.S.
Treaty, Law, Agreement, or Regulation
TABLE 6 -- FOREIGN-MANUFACTURED OR PRODUCED PRODUCTS BUT ONLY ONE US MANUFACTURER PRODUCES PRODUCT OR LINE OF PARTICULAR GOOD (Eligible for Preference)
• List item numbers of products bid that are foreign manufactured or produced but qualify for the Domestic Products Procurement Act
Preference because only one US Manufacturer produces the product or line of a particular good.
• Identify country where proposed foreign-made product is manufactured or produced.
• Identify sole US manufacturer name.
• Identify name of sole US manufactured product/line of particular good.
Item # Country Where Proposed Foreign-Made Product is Manufactured/Produced
Sole US Manufacturer Name
Name of Sole U.S. Manufactured Product or Line of Particular Good
The bidder is responsible for certifying the information provided on this exhibit is accurate by signing below:
I hereby certify that the information provided herein is true and correct, and complies with all provisions of sections 34.350 to 34.359, RSMo. I understand that any misrepresentation herein constitutes the commission of a class A misdemeanor.
SIGNATURE (If submitting bid electronically, scanned or typed signature is acceptable)
COMPANY NAME
File details come from the government source that posted it. Updated .