Exhibit B - SPMYM326Q4041.pdf
PDF 92 KB Posted
- Attached to
- Cap Screws
- Solicitation number
- SPMYM326Q4041
About this file
This is a Contract Data Requirements List specifying two data items required for a machine screw contract under Exhibit A. The contract is managed by Code 245 and references Section C.2 and Section C.3 for respective data item requirements.
Data Item A001 is titled "Certificate of Compliance" with a subtitle of "Certification of Quality Compliance," based on authority DI-MISC-81356A. This item must be submitted one time with the material under a separate shipment number and requires one final copy for distribution. Data Item A002 is titled "Certification Data/Report" with a subtitle of "Chemical & Mechanical Certification," based on authority DI-MISC-80678. This item also requires one-time submission with material and one final copy for distribution. The A002 certification must contain actual test results of all chemical and mechanical tests required by specification in quantitative units as specified. Testing must use new, untested fastener specimens for wedge tensile testing and yield strength testing. Additionally, fastener certification must comply with the contract section on "Marking and Certification requirements for Controlled Industrial Material." Both data items are submitted for payment and processing under Federal Acquisition Regulation (FAR) clauses 252.232-7006, 252.232-7003, or 52.232-36, with each submission requiring a separate shipment number.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1 - Specifications SPMYM326Q4041.pdf | ||
| Attachment 2 - Specifications SPMYM326Q4041.pdf | ||
| Exhibit A - SPMYM326Q4041.pdf | ||
| Combined Synopsis Solicitation Cap Screw SPMYM326Q4041.docx | DOCX document | |
| RFQ-SPMYM326Q4041 Cap Screw 6076E045.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP TM ______ OTHER______
D. SYSTEM/ITEM
SCREW
E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY H. DATE I. APPROVED BY 245.2
X
J. DATE
File details come from the government source that posted it. Updated .