Exhibit A - SPMYM326Q4041.pdf
PDF 90 KB Posted
- Attached to
- Cap Screws
- Solicitation number
- SPMYM326Q4041
About this file
This is a Contract Data Requirements List specifying two mandatory data items for the procurement of capscrews.
Data Item A001 requires submission of a Certificate of Compliance demonstrating quality compliance. This certificate must be submitted once with the material delivery under a separate shipment number and is based on Data Item Description DI-MISC-81356A. The requiring office is CODE 245, and one final copy must be submitted. Technical content should align with the respective contract line item specifications as referenced in Section C.2.
Data Item A002 requires submission of Certification Data/Report documenting chemical and mechanical certification. This submission must include actual test results for all chemical and mechanical tests specified in the applicable specification, with results presented quantitatively in units required by the specification. Submission occurs once with material delivery under a separate shipment number, with one final copy required. The authority is DI-MISC-80678, referenced in Section C.3. Critical requirements include: paragraphs 10.2.2, 10.2.3, and 10.4 of DI-MISC-80678 do not apply; fastener certification must document testing of the correct number of specimens with new untested fasteners required for wedge tensile and yield strength testing; and the contract section on "Marking and Certification requirements for Controlled Industrial Material" applies. Both data items reference payment and submission procedures under Clauses 252.232-7006, 252.232-7003, or 52.232-36, requiring each submission under a separate shipment number. The requiring office CODE 245 approved this list.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1 - Specifications SPMYM326Q4041.pdf | ||
| Attachment 2 - Specifications SPMYM326Q4041.pdf | ||
| Combined Synopsis Solicitation Cap Screw SPMYM326Q4041.docx | DOCX document | |
| RFQ-SPMYM326Q4041 Cap Screw 6076E045.docx | DOCX document | |
| Exhibit B - SPMYM326Q4041.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP TM ______ OTHER______
D. SYSTEM/ITEM
CAPSCREW
E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY H. DATE I. APPROVED BY 245.2
X
J. DATE
File details come from the government source that posted it. Updated .