Exhibit B - Forest Hills Yard Security Improvements Project Stamped Drawings.pdf

Boston

Cleveland Circle

BROOKLINE

NEWTON

WATERTOWN

CAMBRIDGE

BELMONT

ARLINGTON

MEDFORD

SOMERVILLE

MALDEN

EVERETT

CHELSEA

REVERE

WINTHROP

BOSTON

BOSTON

Cabot Yard

Green Street

Stony Brook

Jackson

Roxbury

Mass Ave

Back Bay

State

Community College

Sullivan Square

Wellington

Malden Center

Oak Grove

Square

Wonderland

Revere Beach

Beachmont Suffolk Downs

Orient Heights

Wood Island

Airport Maverick

Aquarium

Bowdoin

Longwood Beaconsfield

Newton Centre

Newton Highlands Chestnut Hill

Reservoir

North Station Science Park

Symphony

Hynes Conv.

Fenway

Kenmore

Porter

Prudential

Copley Arlington

Lechmere

Fields Corner

Shawmut

Haymarket

Brookline

Hills Brookline Village

Gov't Center

Morton Street

Corner Uphams

Crossing

College

Boylston

Savin Hill

Harvard

Ashmont

South Station

Broadway

JFK / UMass

Andrew

Park St

Charles/

MGH

Dwntn Xing

Kendall / MIT

Central

Alewife

Davis

Chinatown

Ruggles

Forest Hills

SECURITY SENSITIVE INFORMATION

WARNING: THIS DOCUMENT CONTAINS SENSITIVE SECURITY

INFORMATION THAT IS CONTROLLED UNDER 49 CFR PARTS 15

AND 1520. NO PART OF THIS DOCUMENT MAY BE DISCLOSED

TO PERSONS WITHOUT A "NEED TO KNOW", AS DEFINED IN 49

CFR PARTS 15 AND 1520, EXCEPT WITH WRITTEN PERMISSION

OF THE MBTA RAIL SECURITY COORDINATOR. UNAUTHORIZED

RELEASE MAY RESULT IN CIVIL PENALTY OR OTHER ACTION.

SECURITY SENSITIVE INFORMATION

MARIO A

RIF

ELECTRICAL

No.56157

AutoCAD SHX Text

AUGUST 2026

AutoCAD SHX Text

APPROVALS:

AutoCAD SHX Text

SHEET: G-001 PLAN NO: 177073

AutoCAD SHX Text

VOLUME 2 OF 2

AutoCAD SHX Text Plan No.'s 177073 - 177090

AutoCAD SHX Text

SECURITY IMPROVEMENTS SITE PLANS AND LAYOUTS

AutoCAD SHX Text

MICHAEL MCCABE

AutoCAD SHX Text Date

AutoCAD SHX Text

%%UMBTA CONTRACT NO. ##-###

AutoCAD SHX Text

DIRECTOR, SECURITY AND EMERGENCY MANAGEMENT

AutoCAD SHX Text

MASSACHUSETTS BAY TRANSPORTATION AUTHORITY

AutoCAD SHX Text Tel: 617-242-9222

AutoCAD SHX Text 120 St. James Avenue

AutoCAD SHX Text Boston, MA 02116

AutoCAD SHX Text Fax: 617-242-9824

AutoCAD SHX Text

MBTA FOREST HILLS YARD SECURITY IMPROVEMENTS PROJECT

AutoCAD SHX Text

PLOT DATE:

AutoCAD SHX Text

FILE NAME:

AutoCAD SHX Text

SOLICITATION SET

177074N/A

G-002KGSPJTPJT

INDEX

DRAWN

BY

SHEET

PLAN NO.

ISSUE

MASSACHUSETTS BAY TRANSPORTATION AUTHORITY

DESIGN

BY

CHECK

BY

DATE:

SCALE:

MBTA CONTRACT NO. S99PS08

MBTA FOREST HILLS YARD

SECURITY IMPROVEMENTS PROJECT

BY CHK'D APPISSUE DATE

MASSACHUSETTS BAY

TRANSPORTATION AUTHORITYmassDOT

Massachusetts Department of Transportation

AUGUST 2026DESCRIPTION

PROJECT MANAGER DATE

SECURITY SENSITIVE INFORMATION

“WARNING: THIS DOCUMENT CONTAINS SENSITIVE SECURITY

INFORMATION THAT IS CONTROLLED UNDER 49 CFR PARTS 15 AND

1520. NO PART OF THIS DOCUMENT MAY BE DISCLOSED TO PERSONS

WITHOUT A “NEED TO KNOW”, AS DEFINED IN 49 CFR PARTS 15 AND

1520, EXCEPT WITH WRITTEN PERMISSION OF THE MBTA RAIL

SECURITY COORDINATOR MANAGER. UNAUTHORIZED RELEASE MAY

RESULT IN CIVIL PENALTY OR OTHER ACTION.”

SECURITY SENSITIVE INFORMATION

MARIO A

RIF

ELECTRICAL

No.56157

AutoCAD SHX Text

DRAWING TITLE

AutoCAD SHX Text

NO.

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

INDEX

AutoCAD SHX Text

TITLE SHEET

AutoCAD SHX Text G-001

AutoCAD SHX Text G-002

AutoCAD SHX Text G-003

AutoCAD SHX Text

GENERAL NOTES (1 OF 2)

AutoCAD SHX Text G-005

AutoCAD SHX Text

FOREST HILLS YARD SITE PLAN - 2 OF 4

AutoCAD SHX Text

SC-203

AutoCAD SHX Text

FOREST HILLS YARD SITE PLAN - 3 OF 4

AutoCAD SHX Text

SC-204

AutoCAD SHX Text

FOREST HILLS YARD SITE PLAN - OVERVIEW

AutoCAD SHX Text

SC-201

AutoCAD SHX Text 177073

AutoCAD SHX Text 177074

AutoCAD SHX Text 177075

AutoCAD SHX Text 177077

AutoCAD SHX Text 177078

AutoCAD SHX Text 177080

AutoCAD SHX Text 177081

AutoCAD SHX Text 177082

AutoCAD SHX Text

SYMBOLS AND ABBREVIATIONS

AutoCAD SHX Text

FOREST HILLS YARD CIVIL DETAILS

AutoCAD SHX Text

SC-604

AutoCAD SHX Text 177086

AutoCAD SHX Text

FOREST HILLS YARD SITE PLAN - 4 OF 4

AutoCAD SHX Text

SC-205

AutoCAD SHX Text

PLOT DATE:

AutoCAD SHX Text

FILE NAME:

AutoCAD SHX Text

OFFICE: 617-242-9222

AutoCAD SHX Text

FAX: 617-242-9824

AutoCAD SHX Text

120 ST. JAMES AVE.

AutoCAD SHX Text

BOSTON, MA 02116

AutoCAD SHX Text G-004

AutoCAD SHX Text 177076

AutoCAD SHX Text

GENERAL NOTES (2 OF 2)

AutoCAD SHX Text 177083

AutoCAD SHX Text

FOREST HILLS YARD SES ENCLOSURE DETAILS

AutoCAD SHX Text

SC-601

AutoCAD SHX Text 177084

AutoCAD SHX Text

FOREST HILLS YARD MOUNTING DETAILS (1 OF 2)

AutoCAD SHX Text

SC-602

AutoCAD SHX Text 177088

AutoCAD SHX Text

FOREST HILLS YARD SITE PLAN - 1 OF 4

AutoCAD SHX Text

SC-202

AutoCAD SHX Text 177079

AutoCAD SHX Text

FOREST HILLS YARD ELECTRICAL DETAILS

AutoCAD SHX Text

SC-606

AutoCAD SHX Text 177089

AutoCAD SHX Text

FOREST HILLS YARD SECURITY ONE LINE AND SCHEDULES

AutoCAD SHX Text

SC-701

AutoCAD SHX Text 177085

AutoCAD SHX Text

FOREST HILLS YARD MOUNTING DETAILS (2 OF 2)

AutoCAD SHX Text

SC-603

AutoCAD SHX Text

FOREST HILLS YARD POLE AND PORTAL EQUIPMENT ELEVATIONS

AutoCAD SHX Text

SC-605

AutoCAD SHX Text 177087

AutoCAD SHX Text 177090

AutoCAD SHX Text

FOREST HILLS YARD ELECTRICAL ONE LINE AND SCHEDULES

E-801

177075N/A

G-003KGSPJTPJT

GENERAL NOTES (1 OF 2)

DRAWN

BY

SHEET

PLAN NO.

ISSUE

MASSACHUSETTS BAY TRANSPORTATION AUTHORITY

DESIGN

BY

CHECK

BY

DATE:

SCALE:

MBTA CONTRACT NO. S99PS08

MBTA FOREST HILLS YARD

SECURITY IMPROVEMENTS PROJECT

BY CHK'D APPISSUE DATE

MASSACHUSETTS BAY

TRANSPORTATION AUTHORITYmassDOT

Massachusetts Department of Transportation

AUGUST 2026DESCRIPTION

PROJECT MANAGER DATE

SECURITY SENSITIVE INFORMATION

“WARNING: THIS DOCUMENT CONTAINS SENSITIVE SECURITY

INFORMATION THAT IS CONTROLLED UNDER 49 CFR PARTS 15 AND

1520. NO PART OF THIS DOCUMENT MAY BE DISCLOSED TO PERSONS

WITHOUT A “NEED TO KNOW”, AS DEFINED IN 49 CFR PARTS 15 AND

1520, EXCEPT WITH WRITTEN PERMISSION OF THE MBTA RAIL

SECURITY COORDINATOR MANAGER. UNAUTHORIZED RELEASE MAY

RESULT IN CIVIL PENALTY OR OTHER ACTION.”

SECURITY SENSITIVE INFORMATION

MARIO A

RIF

ELECTRICAL

No.56157

AutoCAD SHX Text

%%UINSTALLATION OF NEW WORK

AutoCAD SHX Text

%%UGENERAL NOTES

AutoCAD SHX Text

%%UCONNECTIONS TO EXISTING WORK

AutoCAD SHX Text 1.

AutoCAD SHX Text

%%UELECTRICAL SPECIFICATIONS

AutoCAD SHX Text REFERENCE STANDARDS A. PUBLISHED CODES, SPECIFICATIONS, STANDARDS, TESTS OR RECOMMENDED METHODS OF TRADE, INDUSTRY OR GOVERNMENTAL ORGANIZATIONS, OR LOCAL UTILITIES APPLY TO WORK IN THIS DIVISION.

AutoCAD SHX Text

1. ANSI - AMERICAN NATIONAL STANDARDS INSTITUTE. ANSI - AMERICAN NATIONAL STANDARDS INSTITUTE. 2. ASTM - AMERICAN SOCIETY OF TESTING AND MATERIALS. ASTM - AMERICAN SOCIETY OF TESTING AND MATERIALS. 3. CBM - CERTIFIED BALLAST MANUFACTURES. CBM - CERTIFIED BALLAST MANUFACTURES. 4. ETL - ELECTRICAL TESTING LABORATORIES. ETL - ELECTRICAL TESTING LABORATORIES. 5. FCC - FEDERAL COMMUNICATIONS COMMISSION. FCC - FEDERAL COMMUNICATIONS COMMISSION. 6. FM - FACTORY MUTUAL. FM - FACTORY MUTUAL. 7. ICEA - INSULATED CABLE ENGINEERS ASSOCIATION. ICEA - INSULATED CABLE ENGINEERS ASSOCIATION. 8. IEEE - INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS. IEEE - INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS. 9. IES - ILLUMINATING ENGINEERING SOCIETY. IES - ILLUMINATING ENGINEERING SOCIETY. 10. MEC - MASSACHUSETTS ELECTRIC CODE. MEC - MASSACHUSETTS ELECTRIC CODE. 11. NEC - NATIONAL ELECTRIC CODE. NEC - NATIONAL ELECTRIC CODE. 12. NESC - NATIONAL ELECTRIC SAFETY CODE. NESC - NATIONAL ELECTRIC SAFETY CODE. 13. NEMA - NATIONAL ELECTRICAL MANUFACTURE'S ASSOCIATION. NEMA - NATIONAL ELECTRICAL MANUFACTURE'S ASSOCIATION. 14. NFPA - NATIONAL FIRE PROTECTION ASSOCIATION. NFPA - NATIONAL FIRE PROTECTION ASSOCIATION. 15. OSHA - OCCUPATIONAL SAFETY AND HEALTH ACT. OSHA - OCCUPATIONAL SAFETY AND HEALTH ACT. 16. TIA - TELECOMMUNICATIONS INDUSTRY ASSOCIATION. TIA - TELECOMMUNICATIONS INDUSTRY ASSOCIATION. 17. MBC - MASS BUILDING CODE 10TH EDITION. MBC - MASS BUILDING CODE 10TH EDITION. 18. UL - UNDERWRITERS' LABORATORIES, INC. UL - UNDERWRITERS' LABORATORIES, INC. 19. NATIONAL, STATE AND LOCAL CODES OF ALL AUTHORITIES HAVING JURISDICTION. NATIONAL, STATE AND LOCAL CODES OF ALL AUTHORITIES HAVING JURISDICTION. 20. ADA - AMERICANS WITH DISABILITIES ACT ADA - AMERICANS WITH DISABILITIES ACT

AutoCAD SHX Text B. IN ADDITION TO COMPLYING WITH ALL OTHER LEGAL REQUIREMENTS, COMPLY WITH IN ADDITION TO COMPLYING WITH ALL OTHER LEGAL REQUIREMENTS, COMPLY WITH IN ADDITION TO COMPLYING WITH ALL OTHER LEGAL REQUIREMENTS, COMPLY WITH ADDITION TO COMPLYING WITH ALL OTHER LEGAL REQUIREMENTS, COMPLY WITH ADDITION TO COMPLYING WITH ALL OTHER LEGAL REQUIREMENTS, COMPLY WITH TO COMPLYING WITH ALL OTHER LEGAL REQUIREMENTS, COMPLY WITH TO COMPLYING WITH ALL OTHER LEGAL REQUIREMENTS, COMPLY WITH COMPLYING WITH ALL OTHER LEGAL REQUIREMENTS, COMPLY WITH COMPLYING WITH ALL OTHER LEGAL REQUIREMENTS, COMPLY WITH WITH ALL OTHER LEGAL REQUIREMENTS, COMPLY WITH WITH ALL OTHER LEGAL REQUIREMENTS, COMPLY WITH ALL OTHER LEGAL REQUIREMENTS, COMPLY WITH ALL OTHER LEGAL REQUIREMENTS, COMPLY WITH OTHER LEGAL REQUIREMENTS, COMPLY WITH OTHER LEGAL REQUIREMENTS, COMPLY WITH LEGAL REQUIREMENTS, COMPLY WITH LEGAL REQUIREMENTS, COMPLY WITH REQUIREMENTS, COMPLY WITH REQUIREMENTS, COMPLY WITH COMPLY WITH COMPLY WITH WITH WITH CURRENT PROVISIONS OF GOVERNING CODES AND REGULATIONS IN EFFECT DURING THE PROVISIONS OF GOVERNING CODES AND REGULATIONS IN EFFECT DURING THE PROVISIONS OF GOVERNING CODES AND REGULATIONS IN EFFECT DURING THE OF GOVERNING CODES AND REGULATIONS IN EFFECT DURING THE OF GOVERNING CODES AND REGULATIONS IN EFFECT DURING THE GOVERNING CODES AND REGULATIONS IN EFFECT DURING THE GOVERNING CODES AND REGULATIONS IN EFFECT DURING THE CODES AND REGULATIONS IN EFFECT DURING THE CODES AND REGULATIONS IN EFFECT DURING THE AND REGULATIONS IN EFFECT DURING THE AND REGULATIONS IN EFFECT DURING THE REGULATIONS IN EFFECT DURING THE REGULATIONS IN EFFECT DURING THE IN EFFECT DURING THE IN EFFECT DURING THE EFFECT DURING THE EFFECT DURING THE DURING THE DURING THE THE THE PROGRESS OF THE WORK, AND THE FOLLOWING:

AutoCAD SHX Text THE CONTRACT DRAWINGS INDICATE THE GENERAL ARRANGEMENT FOR THE SECURITY AND CONTRACT DRAWINGS INDICATE THE GENERAL ARRANGEMENT FOR THE SECURITY AND CONTRACT DRAWINGS INDICATE THE GENERAL ARRANGEMENT FOR THE SECURITY AND DRAWINGS INDICATE THE GENERAL ARRANGEMENT FOR THE SECURITY AND DRAWINGS INDICATE THE GENERAL ARRANGEMENT FOR THE SECURITY AND INDICATE THE GENERAL ARRANGEMENT FOR THE SECURITY AND INDICATE THE GENERAL ARRANGEMENT FOR THE SECURITY AND THE GENERAL ARRANGEMENT FOR THE SECURITY AND THE GENERAL ARRANGEMENT FOR THE SECURITY AND GENERAL ARRANGEMENT FOR THE SECURITY AND GENERAL ARRANGEMENT FOR THE SECURITY AND ARRANGEMENT FOR THE SECURITY AND ARRANGEMENT FOR THE SECURITY AND FOR THE SECURITY AND FOR THE SECURITY AND THE SECURITY AND THE SECURITY AND SECURITY AND SECURITY AND AND AND SYSTEMS.

AutoCAD SHX Text 1.

AutoCAD SHX Text 2.

AutoCAD SHX Text DRAWINGS ARE DIAGRAMMATIC AND DO NOT INDICATE NECESSARY OFFSETS, ARE DIAGRAMMATIC AND DO NOT INDICATE NECESSARY OFFSETS, ARE DIAGRAMMATIC AND DO NOT INDICATE NECESSARY OFFSETS, DIAGRAMMATIC AND DO NOT INDICATE NECESSARY OFFSETS, DIAGRAMMATIC AND DO NOT INDICATE NECESSARY OFFSETS, AND DO NOT INDICATE NECESSARY OFFSETS, AND DO NOT INDICATE NECESSARY OFFSETS, DO NOT INDICATE NECESSARY OFFSETS, DO NOT INDICATE NECESSARY OFFSETS, NOT INDICATE NECESSARY OFFSETS, NOT INDICATE NECESSARY OFFSETS, INDICATE NECESSARY OFFSETS, INDICATE NECESSARY OFFSETS, NECESSARY OFFSETS, NECESSARY OFFSETS, OFFSETS, OFFSETS, OBSTRUCTIONS OR STRUCTURAL CONDITIONS.

AutoCAD SHX Text GROUNDING SYSTEM FOR SECURITY EQUIPMENT, JUNCTION BOXES, POWER AND ANY SYSTEM FOR SECURITY EQUIPMENT, JUNCTION BOXES, POWER AND ANY SYSTEM FOR SECURITY EQUIPMENT, JUNCTION BOXES, POWER AND ANY FOR SECURITY EQUIPMENT, JUNCTION BOXES, POWER AND ANY FOR SECURITY EQUIPMENT, JUNCTION BOXES, POWER AND ANY SECURITY EQUIPMENT, JUNCTION BOXES, POWER AND ANY SECURITY EQUIPMENT, JUNCTION BOXES, POWER AND ANY EQUIPMENT, JUNCTION BOXES, POWER AND ANY EQUIPMENT, JUNCTION BOXES, POWER AND ANY JUNCTION BOXES, POWER AND ANY JUNCTION BOXES, POWER AND ANY BOXES, POWER AND ANY BOXES, POWER AND ANY POWER AND ANY POWER AND ANY AND ANY AND ANY ANY ANY OTHER EQUIPMENT OR APPARATUS PROVIDED SHALL COMPLY WITH THE REQUIREMENTS EQUIPMENT OR APPARATUS PROVIDED SHALL COMPLY WITH THE REQUIREMENTS EQUIPMENT OR APPARATUS PROVIDED SHALL COMPLY WITH THE REQUIREMENTS OR APPARATUS PROVIDED SHALL COMPLY WITH THE REQUIREMENTS OR APPARATUS PROVIDED SHALL COMPLY WITH THE REQUIREMENTS APPARATUS PROVIDED SHALL COMPLY WITH THE REQUIREMENTS APPARATUS PROVIDED SHALL COMPLY WITH THE REQUIREMENTS PROVIDED SHALL COMPLY WITH THE REQUIREMENTS PROVIDED SHALL COMPLY WITH THE REQUIREMENTS SHALL COMPLY WITH THE REQUIREMENTS SHALL COMPLY WITH THE REQUIREMENTS COMPLY WITH THE REQUIREMENTS COMPLY WITH THE REQUIREMENTS WITH THE REQUIREMENTS WITH THE REQUIREMENTS THE REQUIREMENTS THE REQUIREMENTS REQUIREMENTS REQUIREMENTS OF MBTA SPECIFICATIONS, SECTION 16450.

AutoCAD SHX Text 1.

AutoCAD SHX Text INSTALL NEW WORK AND CONNECT TO EXISTING WORK WITH MINIMUM INTERFERENCE TO NEW WORK AND CONNECT TO EXISTING WORK WITH MINIMUM INTERFERENCE TO NEW WORK AND CONNECT TO EXISTING WORK WITH MINIMUM INTERFERENCE TO WORK AND CONNECT TO EXISTING WORK WITH MINIMUM INTERFERENCE TO WORK AND CONNECT TO EXISTING WORK WITH MINIMUM INTERFERENCE TO AND CONNECT TO EXISTING WORK WITH MINIMUM INTERFERENCE TO AND CONNECT TO EXISTING WORK WITH MINIMUM INTERFERENCE TO CONNECT TO EXISTING WORK WITH MINIMUM INTERFERENCE TO CONNECT TO EXISTING WORK WITH MINIMUM INTERFERENCE TO TO EXISTING WORK WITH MINIMUM INTERFERENCE TO TO EXISTING WORK WITH MINIMUM INTERFERENCE TO EXISTING WORK WITH MINIMUM INTERFERENCE TO EXISTING WORK WITH MINIMUM INTERFERENCE TO WORK WITH MINIMUM INTERFERENCE TO WORK WITH MINIMUM INTERFERENCE TO WITH MINIMUM INTERFERENCE TO WITH MINIMUM INTERFERENCE TO MINIMUM INTERFERENCE TO MINIMUM INTERFERENCE TO INTERFERENCE TO INTERFERENCE TO TO TO EXISTING FACILITIES.

AutoCAD SHX Text

COORDINATE THE WORK IN AMPLE TIME FOR PROPER INSTALLATION AND CONNECTION.

AutoCAD SHX Text 3.

AutoCAD SHX Text CAREFULLY CHECK SPACE REQUIREMENTS, INCLUDING SERVICING SPACE REQUIREMENTS, CHECK SPACE REQUIREMENTS, INCLUDING SERVICING SPACE REQUIREMENTS, CHECK SPACE REQUIREMENTS, INCLUDING SERVICING SPACE REQUIREMENTS, SPACE REQUIREMENTS, INCLUDING SERVICING SPACE REQUIREMENTS, SPACE REQUIREMENTS, INCLUDING SERVICING SPACE REQUIREMENTS, REQUIREMENTS, INCLUDING SERVICING SPACE REQUIREMENTS, REQUIREMENTS, INCLUDING SERVICING SPACE REQUIREMENTS, INCLUDING SERVICING SPACE REQUIREMENTS, INCLUDING SERVICING SPACE REQUIREMENTS, SERVICING SPACE REQUIREMENTS, SERVICING SPACE REQUIREMENTS, SPACE REQUIREMENTS, SPACE REQUIREMENTS, REQUIREMENTS, REQUIREMENTS, TO ENSURE THAT ALL EQUIPMENT AND MATERIALS CAN BE INSTALLED IN SPACES ENSURE THAT ALL EQUIPMENT AND MATERIALS CAN BE INSTALLED IN SPACES ENSURE THAT ALL EQUIPMENT AND MATERIALS CAN BE INSTALLED IN SPACES THAT ALL EQUIPMENT AND MATERIALS CAN BE INSTALLED IN SPACES THAT ALL EQUIPMENT AND MATERIALS CAN BE INSTALLED IN SPACES ALL EQUIPMENT AND MATERIALS CAN BE INSTALLED IN SPACES ALL EQUIPMENT AND MATERIALS CAN BE INSTALLED IN SPACES EQUIPMENT AND MATERIALS CAN BE INSTALLED IN SPACES EQUIPMENT AND MATERIALS CAN BE INSTALLED IN SPACES AND MATERIALS CAN BE INSTALLED IN SPACES AND MATERIALS CAN BE INSTALLED IN SPACES MATERIALS CAN BE INSTALLED IN SPACES MATERIALS CAN BE INSTALLED IN SPACES CAN BE INSTALLED IN SPACES CAN BE INSTALLED IN SPACES BE INSTALLED IN SPACES BE INSTALLED IN SPACES INSTALLED IN SPACES INSTALLED IN SPACES IN SPACES IN SPACES SPACES SPACES ALLOTTED THERETO.

AutoCAD SHX Text 4.

AutoCAD SHX Text PREPARE DRAWINGS, ATTEND MEETINGS, OBTAIN ALL APPROVALS REQUIRED BY ALL DRAWINGS, ATTEND MEETINGS, OBTAIN ALL APPROVALS REQUIRED BY ALL DRAWINGS, ATTEND MEETINGS, OBTAIN ALL APPROVALS REQUIRED BY ALL ATTEND MEETINGS, OBTAIN ALL APPROVALS REQUIRED BY ALL ATTEND MEETINGS, OBTAIN ALL APPROVALS REQUIRED BY ALL MEETINGS, OBTAIN ALL APPROVALS REQUIRED BY ALL MEETINGS, OBTAIN ALL APPROVALS REQUIRED BY ALL OBTAIN ALL APPROVALS REQUIRED BY ALL OBTAIN ALL APPROVALS REQUIRED BY ALL ALL APPROVALS REQUIRED BY ALL ALL APPROVALS REQUIRED BY ALL APPROVALS REQUIRED BY ALL APPROVALS REQUIRED BY ALL REQUIRED BY ALL REQUIRED BY ALL BY ALL BY ALL ALL ALL AUTHORITIES HAVING JURISDICTION, CONDUCT REQUIRED TESTS AND OBTAIN REQUIRED HAVING JURISDICTION, CONDUCT REQUIRED TESTS AND OBTAIN REQUIRED HAVING JURISDICTION, CONDUCT REQUIRED TESTS AND OBTAIN REQUIRED JURISDICTION, CONDUCT REQUIRED TESTS AND OBTAIN REQUIRED JURISDICTION, CONDUCT REQUIRED TESTS AND OBTAIN REQUIRED CONDUCT REQUIRED TESTS AND OBTAIN REQUIRED CONDUCT REQUIRED TESTS AND OBTAIN REQUIRED REQUIRED TESTS AND OBTAIN REQUIRED REQUIRED TESTS AND OBTAIN REQUIRED TESTS AND OBTAIN REQUIRED TESTS AND OBTAIN REQUIRED AND OBTAIN REQUIRED AND OBTAIN REQUIRED OBTAIN REQUIRED OBTAIN REQUIRED REQUIRED REQUIRED PERMITS.

AutoCAD SHX Text 5.

AutoCAD SHX Text COMMUNICATION CABLE SHALL BE INSTALLED IN CONFORMANCE WITH MBTA CABLE SHALL BE INSTALLED IN CONFORMANCE WITH MBTA CABLE SHALL BE INSTALLED IN CONFORMANCE WITH MBTA SHALL BE INSTALLED IN CONFORMANCE WITH MBTA SHALL BE INSTALLED IN CONFORMANCE WITH MBTA BE INSTALLED IN CONFORMANCE WITH MBTA BE INSTALLED IN CONFORMANCE WITH MBTA INSTALLED IN CONFORMANCE WITH MBTA INSTALLED IN CONFORMANCE WITH MBTA IN CONFORMANCE WITH MBTA IN CONFORMANCE WITH MBTA CONFORMANCE WITH MBTA CONFORMANCE WITH MBTA WITH MBTA WITH MBTA MBTA MBTA SPECIFICATIONS, SECTION 16840.

AutoCAD SHX Text 6.

AutoCAD SHX Text THE INSTALLATION OF POWER WIRE AND CABLE SHALL CONFORM TO APPLICABLE INSTALLATION OF POWER WIRE AND CABLE SHALL CONFORM TO APPLICABLE INSTALLATION OF POWER WIRE AND CABLE SHALL CONFORM TO APPLICABLE OF POWER WIRE AND CABLE SHALL CONFORM TO APPLICABLE OF POWER WIRE AND CABLE SHALL CONFORM TO APPLICABLE POWER WIRE AND CABLE SHALL CONFORM TO APPLICABLE POWER WIRE AND CABLE SHALL CONFORM TO APPLICABLE WIRE AND CABLE SHALL CONFORM TO APPLICABLE WIRE AND CABLE SHALL CONFORM TO APPLICABLE AND CABLE SHALL CONFORM TO APPLICABLE AND CABLE SHALL CONFORM TO APPLICABLE CABLE SHALL CONFORM TO APPLICABLE CABLE SHALL CONFORM TO APPLICABLE SHALL CONFORM TO APPLICABLE SHALL CONFORM TO APPLICABLE CONFORM TO APPLICABLE CONFORM TO APPLICABLE TO APPLICABLE TO APPLICABLE APPLICABLE APPLICABLE SECTIONS OF THE MEC AND THE REQUIREMENTS OF MBTA SPECIFICATIONS, SECTION OF THE MEC AND THE REQUIREMENTS OF MBTA SPECIFICATIONS, SECTION OF THE MEC AND THE REQUIREMENTS OF MBTA SPECIFICATIONS, SECTION THE MEC AND THE REQUIREMENTS OF MBTA SPECIFICATIONS, SECTION THE MEC AND THE REQUIREMENTS OF MBTA SPECIFICATIONS, SECTION MEC AND THE REQUIREMENTS OF MBTA SPECIFICATIONS, SECTION MEC AND THE REQUIREMENTS OF MBTA SPECIFICATIONS, SECTION AND THE REQUIREMENTS OF MBTA SPECIFICATIONS, SECTION AND THE REQUIREMENTS OF MBTA SPECIFICATIONS, SECTION THE REQUIREMENTS OF MBTA SPECIFICATIONS, SECTION THE REQUIREMENTS OF MBTA SPECIFICATIONS, SECTION REQUIREMENTS OF MBTA SPECIFICATIONS, SECTION REQUIREMENTS OF MBTA SPECIFICATIONS, SECTION OF MBTA SPECIFICATIONS, SECTION OF MBTA SPECIFICATIONS, SECTION MBTA SPECIFICATIONS, SECTION MBTA SPECIFICATIONS, SECTION SPECIFICATIONS, SECTION SPECIFICATIONS, SECTION SECTION SECTION 16050.

AutoCAD SHX Text 7.

AutoCAD SHX Text 8.

AutoCAD SHX Text TEMPORARY SHUTDOWN OF EXISTING SERVICES. A. AT NO ADDITIONAL CHARGES. B. AT TIMES NOT TO INTERFERE WITH NORMAL OPERATION OF EXISTING FACILITIES. C. ONLY WITH WRITTEN CONSENT OF THE AUTHORITY.

AutoCAD SHX Text 2.

AutoCAD SHX Text

ALARM AND EMERGENCY SYSTEMS: NOT TO BE INTERRUPTED.

AutoCAD SHX Text 3.

AutoCAD SHX Text MAINTAIN CONTINUOUS OPERATION OF EXISTING FACILITIES AS REQUIRED WITH CONTINUOUS OPERATION OF EXISTING FACILITIES AS REQUIRED WITH CONTINUOUS OPERATION OF EXISTING FACILITIES AS REQUIRED WITH OPERATION OF EXISTING FACILITIES AS REQUIRED WITH OPERATION OF EXISTING FACILITIES AS REQUIRED WITH OF EXISTING FACILITIES AS REQUIRED WITH OF EXISTING FACILITIES AS REQUIRED WITH EXISTING FACILITIES AS REQUIRED WITH EXISTING FACILITIES AS REQUIRED WITH FACILITIES AS REQUIRED WITH FACILITIES AS REQUIRED WITH AS REQUIRED WITH AS REQUIRED WITH REQUIRED WITH REQUIRED WITH WITH WITH NECESSARY TEMPORARY CONNECTIONS BETWEEN NEW AND EXISTING WORK.

AutoCAD SHX Text 4.

AutoCAD SHX Text CONNECT NEW AND EXISTING WORK IN NEAT AND ACCEPTABLE MANNER. RESTORE NEW AND EXISTING WORK IN NEAT AND ACCEPTABLE MANNER. RESTORE NEW AND EXISTING WORK IN NEAT AND ACCEPTABLE MANNER. RESTORE AND EXISTING WORK IN NEAT AND ACCEPTABLE MANNER. RESTORE AND EXISTING WORK IN NEAT AND ACCEPTABLE MANNER. RESTORE EXISTING WORK IN NEAT AND ACCEPTABLE MANNER. RESTORE EXISTING WORK IN NEAT AND ACCEPTABLE MANNER. RESTORE WORK IN NEAT AND ACCEPTABLE MANNER. RESTORE WORK IN NEAT AND ACCEPTABLE MANNER. RESTORE IN NEAT AND ACCEPTABLE MANNER. RESTORE IN NEAT AND ACCEPTABLE MANNER. RESTORE NEAT AND ACCEPTABLE MANNER. RESTORE NEAT AND ACCEPTABLE MANNER. RESTORE AND ACCEPTABLE MANNER. RESTORE AND ACCEPTABLE MANNER. RESTORE ACCEPTABLE MANNER. RESTORE ACCEPTABLE MANNER. RESTORE MANNER. RESTORE MANNER. RESTORE RESTORE RESTORE EXISTING DISTURBED WORK TO ORIGINAL CONDITION INCLUDING MAINTENANCE OF WIRING DISTURBED WORK TO ORIGINAL CONDITION INCLUDING MAINTENANCE OF WIRING DISTURBED WORK TO ORIGINAL CONDITION INCLUDING MAINTENANCE OF WIRING WORK TO ORIGINAL CONDITION INCLUDING MAINTENANCE OF WIRING WORK TO ORIGINAL CONDITION INCLUDING MAINTENANCE OF WIRING TO ORIGINAL CONDITION INCLUDING MAINTENANCE OF WIRING TO ORIGINAL CONDITION INCLUDING MAINTENANCE OF WIRING ORIGINAL CONDITION INCLUDING MAINTENANCE OF WIRING ORIGINAL CONDITION INCLUDING MAINTENANCE OF WIRING CONDITION INCLUDING MAINTENANCE OF WIRING CONDITION INCLUDING MAINTENANCE OF WIRING INCLUDING MAINTENANCE OF WIRING INCLUDING MAINTENANCE OF WIRING MAINTENANCE OF WIRING MAINTENANCE OF WIRING OF WIRING OF WIRING WIRING WIRING CONTINUITY AS REQUIRED.

AutoCAD SHX Text 5.

AutoCAD SHX Text 9.

AutoCAD SHX Text CONCEAL NEW CONDUIT FROM PUBLIC SPACES WHEREVER POSSIBLE. THIS INCLUDES NEW CONDUIT FROM PUBLIC SPACES WHEREVER POSSIBLE. THIS INCLUDES NEW CONDUIT FROM PUBLIC SPACES WHEREVER POSSIBLE. THIS INCLUDES CONDUIT FROM PUBLIC SPACES WHEREVER POSSIBLE. THIS INCLUDES CONDUIT FROM PUBLIC SPACES WHEREVER POSSIBLE. THIS INCLUDES FROM PUBLIC SPACES WHEREVER POSSIBLE. THIS INCLUDES FROM PUBLIC SPACES WHEREVER POSSIBLE. THIS INCLUDES PUBLIC SPACES WHEREVER POSSIBLE. THIS INCLUDES PUBLIC SPACES WHEREVER POSSIBLE. THIS INCLUDES SPACES WHEREVER POSSIBLE. THIS INCLUDES SPACES WHEREVER POSSIBLE. THIS INCLUDES WHEREVER POSSIBLE. THIS INCLUDES WHEREVER POSSIBLE. THIS INCLUDES POSSIBLE. THIS INCLUDES POSSIBLE. THIS INCLUDES THIS INCLUDES THIS INCLUDES INCLUDES INCLUDES INSTALLATION ABOVE SUSPENDED CEILINGS, WITHIN UTILITY ROOMS, VOID SPACES BEHIND ABOVE SUSPENDED CEILINGS, WITHIN UTILITY ROOMS, VOID SPACES BEHIND ABOVE SUSPENDED CEILINGS, WITHIN UTILITY ROOMS, VOID SPACES BEHIND SUSPENDED CEILINGS, WITHIN UTILITY ROOMS, VOID SPACES BEHIND SUSPENDED CEILINGS, WITHIN UTILITY ROOMS, VOID SPACES BEHIND CEILINGS, WITHIN UTILITY ROOMS, VOID SPACES BEHIND CEILINGS, WITHIN UTILITY ROOMS, VOID SPACES BEHIND WITHIN UTILITY ROOMS, VOID SPACES BEHIND WITHIN UTILITY ROOMS, VOID SPACES BEHIND UTILITY ROOMS, VOID SPACES BEHIND UTILITY ROOMS, VOID SPACES BEHIND ROOMS, VOID SPACES BEHIND ROOMS, VOID SPACES BEHIND VOID SPACES BEHIND VOID SPACES BEHIND SPACES BEHIND SPACES BEHIND BEHIND BEHIND WALLS, ETC. CONCEALED RACEWAYS SHALL BE INSTALLED IN A DIRECT LINE WITH LONG ETC. CONCEALED RACEWAYS SHALL BE INSTALLED IN A DIRECT LINE WITH LONG ETC. CONCEALED RACEWAYS SHALL BE INSTALLED IN A DIRECT LINE WITH LONG CONCEALED RACEWAYS SHALL BE INSTALLED IN A DIRECT LINE WITH LONG CONCEALED RACEWAYS SHALL BE INSTALLED IN A DIRECT LINE WITH LONG RACEWAYS SHALL BE INSTALLED IN A DIRECT LINE WITH LONG RACEWAYS SHALL BE INSTALLED IN A DIRECT LINE WITH LONG SHALL BE INSTALLED IN A DIRECT LINE WITH LONG SHALL BE INSTALLED IN A DIRECT LINE WITH LONG BE INSTALLED IN A DIRECT LINE WITH LONG BE INSTALLED IN A DIRECT LINE WITH LONG INSTALLED IN A DIRECT LINE WITH LONG INSTALLED IN A DIRECT LINE WITH LONG IN A DIRECT LINE WITH LONG IN A DIRECT LINE WITH LONG A DIRECT LINE WITH LONG A DIRECT LINE WITH LONG DIRECT LINE WITH LONG DIRECT LINE WITH LONG LINE WITH LONG LINE WITH LONG WITH LONG WITH LONG LONG LONG SWEEP BENDS AND OFFSETS. ALL HORIZONTAL RUNS SHALL BE RUN WITH A SLIGHT BENDS AND OFFSETS. ALL HORIZONTAL RUNS SHALL BE RUN WITH A SLIGHT BENDS AND OFFSETS. ALL HORIZONTAL RUNS SHALL BE RUN WITH A SLIGHT AND OFFSETS. ALL HORIZONTAL RUNS SHALL BE RUN WITH A SLIGHT AND OFFSETS. ALL HORIZONTAL RUNS SHALL BE RUN WITH A SLIGHT OFFSETS. ALL HORIZONTAL RUNS SHALL BE RUN WITH A SLIGHT OFFSETS. ALL HORIZONTAL RUNS SHALL BE RUN WITH A SLIGHT ALL HORIZONTAL RUNS SHALL BE RUN WITH A SLIGHT ALL HORIZONTAL RUNS SHALL BE RUN WITH A SLIGHT HORIZONTAL RUNS SHALL BE RUN WITH A SLIGHT HORIZONTAL RUNS SHALL BE RUN WITH A SLIGHT RUNS SHALL BE RUN WITH A SLIGHT RUNS SHALL BE RUN WITH A SLIGHT SHALL BE RUN WITH A SLIGHT SHALL BE RUN WITH A SLIGHT BE RUN WITH A SLIGHT BE RUN WITH A SLIGHT RUN WITH A SLIGHT RUN WITH A SLIGHT WITH A SLIGHT WITH A SLIGHT A SLIGHT A SLIGHT SLIGHT SLIGHT INCLINE, TO PREVENT LOW SPOTS OR POCKETS, FOR DRAINAGE. WHEN NEW CONDUIT IS TO PREVENT LOW SPOTS OR POCKETS, FOR DRAINAGE. WHEN NEW CONDUIT IS TO PREVENT LOW SPOTS OR POCKETS, FOR DRAINAGE. WHEN NEW CONDUIT IS PREVENT LOW SPOTS OR POCKETS, FOR DRAINAGE. WHEN NEW CONDUIT IS PREVENT LOW SPOTS OR POCKETS, FOR DRAINAGE. WHEN NEW CONDUIT IS LOW SPOTS OR POCKETS, FOR DRAINAGE. WHEN NEW CONDUIT IS LOW SPOTS OR POCKETS, FOR DRAINAGE. WHEN NEW CONDUIT IS SPOTS OR POCKETS, FOR DRAINAGE. WHEN NEW CONDUIT IS SPOTS OR POCKETS, FOR DRAINAGE. WHEN NEW CONDUIT IS OR POCKETS, FOR DRAINAGE. WHEN NEW CONDUIT IS OR POCKETS, FOR DRAINAGE. WHEN NEW CONDUIT IS POCKETS, FOR DRAINAGE. WHEN NEW CONDUIT IS POCKETS, FOR DRAINAGE. WHEN NEW CONDUIT IS FOR DRAINAGE. WHEN NEW CONDUIT IS FOR DRAINAGE. WHEN NEW CONDUIT IS DRAINAGE. WHEN NEW CONDUIT IS DRAINAGE. WHEN NEW CONDUIT IS WHEN NEW CONDUIT IS WHEN NEW CONDUIT IS NEW CONDUIT IS NEW CONDUIT IS CONDUIT IS CONDUIT IS IS IS EXPOSED TO THE PUBLIC, THE RACEWAY SHALL BE INSTALLED AT RIGHT ANGLES TO TO THE PUBLIC, THE RACEWAY SHALL BE INSTALLED AT RIGHT ANGLES TO TO THE PUBLIC, THE RACEWAY SHALL BE INSTALLED AT RIGHT ANGLES TO THE PUBLIC, THE RACEWAY SHALL BE INSTALLED AT RIGHT ANGLES TO THE PUBLIC, THE RACEWAY SHALL BE INSTALLED AT RIGHT ANGLES TO PUBLIC, THE RACEWAY SHALL BE INSTALLED AT RIGHT ANGLES TO PUBLIC, THE RACEWAY SHALL BE INSTALLED AT RIGHT ANGLES TO THE RACEWAY SHALL BE INSTALLED AT RIGHT ANGLES TO THE RACEWAY SHALL BE INSTALLED AT RIGHT ANGLES TO RACEWAY SHALL BE INSTALLED AT RIGHT ANGLES TO RACEWAY SHALL BE INSTALLED AT RIGHT ANGLES TO SHALL BE INSTALLED AT RIGHT ANGLES TO SHALL BE INSTALLED AT RIGHT ANGLES TO BE INSTALLED AT RIGHT ANGLES TO BE INSTALLED AT RIGHT ANGLES TO INSTALLED AT RIGHT ANGLES TO INSTALLED AT RIGHT ANGLES TO AT RIGHT ANGLES TO AT RIGHT ANGLES TO RIGHT ANGLES TO RIGHT ANGLES TO ANGLES TO ANGLES TO TO TO THE BUILDING LINES. CONDUIT ROUTING PLANS SHALL BE SUBMITTED BY THE BUILDING LINES. CONDUIT ROUTING PLANS SHALL BE SUBMITTED BY THE BUILDING LINES. CONDUIT ROUTING PLANS SHALL BE SUBMITTED BY THE LINES. CONDUIT ROUTING PLANS SHALL BE SUBMITTED BY THE LINES. CONDUIT ROUTING PLANS SHALL BE SUBMITTED BY THE CONDUIT ROUTING PLANS SHALL BE SUBMITTED BY THE CONDUIT ROUTING PLANS SHALL BE SUBMITTED BY THE ROUTING PLANS SHALL BE SUBMITTED BY THE ROUTING PLANS SHALL BE SUBMITTED BY THE PLANS SHALL BE SUBMITTED BY THE PLANS SHALL BE SUBMITTED BY THE SHALL BE SUBMITTED BY THE SHALL BE SUBMITTED BY THE BE SUBMITTED BY THE BE SUBMITTED BY THE SUBMITTED BY THE SUBMITTED BY THE BY THE BY THE THE THE CONTRACTOR FOR APPROVAL. NO WORK MAY PROCEED UNTIL THE ROUTING PLAN IS FOR APPROVAL. NO WORK MAY PROCEED UNTIL THE ROUTING PLAN IS FOR APPROVAL. NO WORK MAY PROCEED UNTIL THE ROUTING PLAN IS APPROVAL. NO WORK MAY PROCEED UNTIL THE ROUTING PLAN IS APPROVAL. NO WORK MAY PROCEED UNTIL THE ROUTING PLAN IS NO WORK MAY PROCEED UNTIL THE ROUTING PLAN IS NO WORK MAY PROCEED UNTIL THE ROUTING PLAN IS WORK MAY PROCEED UNTIL THE ROUTING PLAN IS WORK MAY PROCEED UNTIL THE ROUTING PLAN IS MAY PROCEED UNTIL THE ROUTING PLAN IS MAY PROCEED UNTIL THE ROUTING PLAN IS PROCEED UNTIL THE ROUTING PLAN IS PROCEED UNTIL THE ROUTING PLAN IS UNTIL THE ROUTING PLAN IS UNTIL THE ROUTING PLAN IS THE ROUTING PLAN IS THE ROUTING PLAN IS ROUTING PLAN IS ROUTING PLAN IS PLAN IS PLAN IS IS IS APPROVED BY THE MBTA AND ENGINEER.

AutoCAD SHX Text IN THE EVENT THAT REMOVAL OF EQUIPMENT, FENCING, ETC. RESULTS IN EXPOSED THE EVENT THAT REMOVAL OF EQUIPMENT, FENCING, ETC. RESULTS IN EXPOSED THE EVENT THAT REMOVAL OF EQUIPMENT, FENCING, ETC. RESULTS IN EXPOSED EVENT THAT REMOVAL OF EQUIPMENT, FENCING, ETC. RESULTS IN EXPOSED EVENT THAT REMOVAL OF EQUIPMENT, FENCING, ETC. RESULTS IN EXPOSED THAT REMOVAL OF EQUIPMENT, FENCING, ETC. RESULTS IN EXPOSED THAT REMOVAL OF EQUIPMENT, FENCING, ETC. RESULTS IN EXPOSED REMOVAL OF EQUIPMENT, FENCING, ETC. RESULTS IN EXPOSED REMOVAL OF EQUIPMENT, FENCING, ETC. RESULTS IN EXPOSED OF EQUIPMENT, FENCING, ETC. RESULTS IN EXPOSED OF EQUIPMENT, FENCING, ETC. RESULTS IN EXPOSED EQUIPMENT, FENCING, ETC. RESULTS IN EXPOSED EQUIPMENT, FENCING, ETC. RESULTS IN EXPOSED FENCING, ETC. RESULTS IN EXPOSED FENCING, ETC. RESULTS IN EXPOSED ETC. RESULTS IN EXPOSED ETC. RESULTS IN EXPOSED RESULTS IN EXPOSED RESULTS IN EXPOSED IN EXPOSED IN EXPOSED EXPOSED EXPOSED DAMAGED TILES OR PAVERS IN AN AREA NOT COVERED BY THE DRAWINGS, REPLACE TILES OR PAVERS IN AN AREA NOT COVERED BY THE DRAWINGS, REPLACE TILES OR PAVERS IN AN AREA NOT COVERED BY THE DRAWINGS, REPLACE OR PAVERS IN AN AREA NOT COVERED BY THE DRAWINGS, REPLACE OR PAVERS IN AN AREA NOT COVERED BY THE DRAWINGS, REPLACE PAVERS IN AN AREA NOT COVERED BY THE DRAWINGS, REPLACE PAVERS IN AN AREA NOT COVERED BY THE DRAWINGS, REPLACE IN AN AREA NOT COVERED BY THE DRAWINGS, REPLACE IN AN AREA NOT COVERED BY THE DRAWINGS, REPLACE AN AREA NOT COVERED BY THE DRAWINGS, REPLACE AN AREA NOT COVERED BY THE DRAWINGS, REPLACE AREA NOT COVERED BY THE DRAWINGS, REPLACE AREA NOT COVERED BY THE DRAWINGS, REPLACE NOT COVERED BY THE DRAWINGS, REPLACE NOT COVERED BY THE DRAWINGS, REPLACE COVERED BY THE DRAWINGS, REPLACE COVERED BY THE DRAWINGS, REPLACE BY THE DRAWINGS, REPLACE BY THE DRAWINGS, REPLACE THE DRAWINGS, REPLACE THE DRAWINGS, REPLACE DRAWINGS, REPLACE DRAWINGS, REPLACE REPLACE REPLACE DAMAGED TILES OR PAVERS WITH NEW TO MATCH ADJACENT.

AutoCAD SHX Text 10.

AutoCAD SHX Text ALL REQUIREMENTS DESCRIBED HEREIN SHALL BE INCLUDED IN THE CONTRACTOR'S BID. NO REQUIREMENTS DESCRIBED HEREIN SHALL BE INCLUDED IN THE CONTRACTOR'S BID. NO REQUIREMENTS DESCRIBED HEREIN SHALL BE INCLUDED IN THE CONTRACTOR'S BID. NO DESCRIBED HEREIN SHALL BE INCLUDED IN THE CONTRACTOR'S BID. NO DESCRIBED HEREIN SHALL BE INCLUDED IN THE CONTRACTOR'S BID. NO HEREIN SHALL BE INCLUDED IN THE CONTRACTOR'S BID. NO HEREIN SHALL BE INCLUDED IN THE CONTRACTOR'S BID. NO SHALL BE INCLUDED IN THE CONTRACTOR'S BID. NO SHALL BE INCLUDED IN THE CONTRACTOR'S BID. NO BE INCLUDED IN THE CONTRACTOR'S BID. NO BE INCLUDED IN THE CONTRACTOR'S BID. NO INCLUDED IN THE CONTRACTOR'S BID. NO INCLUDED IN THE CONTRACTOR'S BID. NO IN THE CONTRACTOR'S BID. NO IN THE CONTRACTOR'S BID. NO THE CONTRACTOR'S BID. NO THE CONTRACTOR'S BID. NO CONTRACTOR'S BID. NO CONTRACTOR'S BID. NO BID. NO BID. NO NO NO ADDITIONAL COMPENSATION SHALL BE MADE TO THE CONTRACTOR FOR THE FOLLOWING:

AutoCAD SHX Text CORE HOLES AS NECESSARY FOR COMMUNICATIONS AND POWER CONDUIT ROUTING. HOLES AS NECESSARY FOR COMMUNICATIONS AND POWER CONDUIT ROUTING. HOLES AS NECESSARY FOR COMMUNICATIONS AND POWER CONDUIT ROUTING. AS NECESSARY FOR COMMUNICATIONS AND POWER CONDUIT ROUTING. AS NECESSARY FOR COMMUNICATIONS AND POWER CONDUIT ROUTING. NECESSARY FOR COMMUNICATIONS AND POWER CONDUIT ROUTING. NECESSARY FOR COMMUNICATIONS AND POWER CONDUIT ROUTING. FOR COMMUNICATIONS AND POWER CONDUIT ROUTING. FOR COMMUNICATIONS AND POWER CONDUIT ROUTING. COMMUNICATIONS AND POWER CONDUIT ROUTING. COMMUNICATIONS AND POWER CONDUIT ROUTING. AND POWER CONDUIT ROUTING. AND POWER CONDUIT ROUTING. POWER CONDUIT ROUTING. POWER CONDUIT ROUTING. CONDUIT ROUTING. CONDUIT ROUTING. ROUTING. ROUTING. INSTALL FIRE STOPPING FOR ALL CORED HOLES.

AutoCAD SHX Text 11.

AutoCAD SHX Text

1. DRAWINGS AND SPECIFICATION REQUIREMENTS SHALL GOVERN WHERE THEY DRAWINGS AND SPECIFICATION REQUIREMENTS SHALL GOVERN WHERE THEY AND SPECIFICATION REQUIREMENTS SHALL GOVERN WHERE THEY AND SPECIFICATION REQUIREMENTS SHALL GOVERN WHERE THEY SPECIFICATION REQUIREMENTS SHALL GOVERN WHERE THEY SPECIFICATION REQUIREMENTS SHALL GOVERN WHERE THEY REQUIREMENTS SHALL GOVERN WHERE THEY REQUIREMENTS SHALL GOVERN WHERE THEY SHALL GOVERN WHERE THEY SHALL GOVERN WHERE THEY GOVERN WHERE THEY GOVERN WHERE THEY WHERE THEY WHERE THEY THEY THEY EXCEED CODE AND REGULATIONS REQUIREMENTS. 2. WHERE REQUIREMENTS BETWEEN GOVERNING CODES AND REGULATIONS VARY, WHERE REQUIREMENTS BETWEEN GOVERNING CODES AND REGULATIONS VARY, REQUIREMENTS BETWEEN GOVERNING CODES AND REGULATIONS VARY, REQUIREMENTS BETWEEN GOVERNING CODES AND REGULATIONS VARY, BETWEEN GOVERNING CODES AND REGULATIONS VARY, BETWEEN GOVERNING CODES AND REGULATIONS VARY, GOVERNING CODES AND REGULATIONS VARY, GOVERNING CODES AND REGULATIONS VARY, CODES AND REGULATIONS VARY, CODES AND REGULATIONS VARY, AND REGULATIONS VARY, AND REGULATIONS VARY, REGULATIONS VARY, REGULATIONS VARY, VARY, VARY, THE MORE STRINGENT SHALL APPLY. 3. NOTHING CONTAINED IN CONTRACT DOCUMENTS SHALL BE CONSTRUED AS NOTHING CONTAINED IN CONTRACT DOCUMENTS SHALL BE CONSTRUED AS CONTAINED IN CONTRACT DOCUMENTS SHALL BE CONSTRUED AS CONTAINED IN CONTRACT DOCUMENTS SHALL BE CONSTRUED AS IN CONTRACT DOCUMENTS SHALL BE CONSTRUED AS IN CONTRACT DOCUMENTS SHALL BE CONSTRUED AS CONTRACT DOCUMENTS SHALL BE CONSTRUED AS CONTRACT DOCUMENTS SHALL BE CONSTRUED AS DOCUMENTS SHALL BE CONSTRUED AS DOCUMENTS SHALL BE CONSTRUED AS SHALL BE CONSTRUED AS SHALL BE CONSTRUED AS BE CONSTRUED AS BE CONSTRUED AS CONSTRUED AS CONSTRUED AS AS AS AUTHORITY OR PERMISSION TO DISREGARD OR VIOLATE LEGAL OR CODE OR PERMISSION TO DISREGARD OR VIOLATE LEGAL OR CODE OR PERMISSION TO DISREGARD OR VIOLATE LEGAL OR CODE PERMISSION TO DISREGARD OR VIOLATE LEGAL OR CODE PERMISSION TO DISREGARD OR VIOLATE LEGAL OR CODE TO DISREGARD OR VIOLATE LEGAL OR CODE TO DISREGARD OR VIOLATE LEGAL OR CODE DISREGARD OR VIOLATE LEGAL OR CODE DISREGARD OR VIOLATE LEGAL OR CODE OR VIOLATE LEGAL OR CODE OR VIOLATE LEGAL OR CODE VIOLATE LEGAL OR CODE VIOLATE LEGAL OR CODE LEGAL OR CODE LEGAL OR CODE OR CODE OR CODE CODE CODE REQUIREMENTS. THE CONTRACTOR SHALL IMMEDIATELY DRAW TO THE ATTENTION THE CONTRACTOR SHALL IMMEDIATELY DRAW TO THE ATTENTION THE CONTRACTOR SHALL IMMEDIATELY DRAW TO THE ATTENTION CONTRACTOR SHALL IMMEDIATELY DRAW TO THE ATTENTION CONTRACTOR SHALL IMMEDIATELY DRAW TO THE ATTENTION SHALL IMMEDIATELY DRAW TO THE ATTENTION SHALL IMMEDIATELY DRAW TO THE ATTENTION IMMEDIATELY DRAW TO THE ATTENTION IMMEDIATELY DRAW TO THE ATTENTION DRAW TO THE ATTENTION DRAW TO THE ATTENTION TO THE ATTENTION TO THE ATTENTION THE ATTENTION THE ATTENTION ATTENTION ATTENTION OF THE ENGINEER ANY SUCH CONFLICTS NOTED IN THE CONTRACT DOCUMENTS.

AutoCAD SHX Text 12.

AutoCAD SHX Text ENSURE THAT EXACT PLACEMENT OF ALL CABINETS, RACKS, AND PANELS MEETS NEC THAT EXACT PLACEMENT OF ALL CABINETS, RACKS, AND PANELS MEETS NEC THAT EXACT PLACEMENT OF ALL CABINETS, RACKS, AND PANELS MEETS NEC EXACT PLACEMENT OF ALL CABINETS, RACKS, AND PANELS MEETS NEC EXACT PLACEMENT OF ALL CABINETS, RACKS, AND PANELS MEETS NEC PLACEMENT OF ALL CABINETS, RACKS, AND PANELS MEETS NEC PLACEMENT OF ALL CABINETS, RACKS, AND PANELS MEETS NEC OF ALL CABINETS, RACKS, AND PANELS MEETS NEC OF ALL CABINETS, RACKS, AND PANELS MEETS NEC ALL CABINETS, RACKS, AND PANELS MEETS NEC ALL CABINETS, RACKS, AND PANELS MEETS NEC CABINETS, RACKS, AND PANELS MEETS NEC CABINETS, RACKS, AND PANELS MEETS NEC RACKS, AND PANELS MEETS NEC RACKS, AND PANELS MEETS NEC AND PANELS MEETS NEC AND PANELS MEETS NEC PANELS MEETS NEC PANELS MEETS NEC MEETS NEC MEETS NEC NEC NEC REQUIREMENTS FOR WORKING CLEARANCE.

AutoCAD SHX Text 13.

AutoCAD SHX Text

COORDINATE ALL POWER SHUTDOWNS WITH MBTA.

AutoCAD SHX Text

%%UDEMOLITION NOTES

AutoCAD SHX Text

1. ALL MATERIALS TO BE REMOVED AND DISPOSED SHALL BE DISPOSED OF BY LEGAL ALL MATERIALS TO BE REMOVED AND DISPOSED SHALL BE DISPOSED OF BY LEGAL MATERIALS TO BE REMOVED AND DISPOSED SHALL BE DISPOSED OF BY LEGAL MATERIALS TO BE REMOVED AND DISPOSED SHALL BE DISPOSED OF BY LEGAL TO BE REMOVED AND DISPOSED SHALL BE DISPOSED OF BY LEGAL TO BE REMOVED AND DISPOSED SHALL BE DISPOSED OF BY LEGAL BE REMOVED AND DISPOSED SHALL BE DISPOSED OF BY LEGAL BE REMOVED AND DISPOSED SHALL BE DISPOSED OF BY LEGAL REMOVED AND DISPOSED SHALL BE DISPOSED OF BY LEGAL REMOVED AND DISPOSED SHALL BE DISPOSED OF BY LEGAL AND DISPOSED SHALL BE DISPOSED OF BY LEGAL AND DISPOSED SHALL BE DISPOSED OF BY LEGAL DISPOSED SHALL BE DISPOSED OF BY LEGAL DISPOSED SHALL BE DISPOSED OF BY LEGAL SHALL BE DISPOSED OF BY LEGAL SHALL BE DISPOSED OF BY LEGAL BE DISPOSED OF BY LEGAL BE DISPOSED OF BY LEGAL DISPOSED OF BY LEGAL DISPOSED OF BY LEGAL OF BY LEGAL OF BY LEGAL BY LEGAL BY LEGAL LEGAL LEGAL MEANS BY THE CONTRACTOR AT NO ADDITIONAL COST TO THE MBTA. 2. WHERE EQUIPMENT IS TO BE REMOVED AND NO NEW EQUIPMENT INSTALLED THE WHERE EQUIPMENT IS TO BE REMOVED AND NO NEW EQUIPMENT INSTALLED THE EQUIPMENT IS TO BE REMOVED AND NO NEW EQUIPMENT INSTALLED THE EQUIPMENT IS TO BE REMOVED AND NO NEW EQUIPMENT INSTALLED THE IS TO BE REMOVED AND NO NEW EQUIPMENT INSTALLED THE IS TO BE REMOVED AND NO NEW EQUIPMENT INSTALLED THE TO BE REMOVED AND NO NEW EQUIPMENT INSTALLED THE TO BE REMOVED AND NO NEW EQUIPMENT INSTALLED THE BE REMOVED AND NO NEW EQUIPMENT INSTALLED THE BE REMOVED AND NO NEW EQUIPMENT INSTALLED THE REMOVED AND NO NEW EQUIPMENT INSTALLED THE REMOVED AND NO NEW EQUIPMENT INSTALLED THE AND NO NEW EQUIPMENT INSTALLED THE AND NO NEW EQUIPMENT INSTALLED THE NO NEW EQUIPMENT INSTALLED THE NO NEW EQUIPMENT INSTALLED THE NEW EQUIPMENT INSTALLED THE NEW EQUIPMENT INSTALLED THE EQUIPMENT INSTALLED THE EQUIPMENT INSTALLED THE INSTALLED THE INSTALLED THE THE THE CONTRACTOR SHALL BE RESPONSIBLE FOR PATCHING EXISTING FINISHES. 3. SHOULD EXISTING STRUCTURES OR FINISHES BE DAMAGED DURING ANY PART OF SHOULD EXISTING STRUCTURES OR FINISHES BE DAMAGED DURING ANY PART OF EXISTING STRUCTURES OR FINISHES BE DAMAGED DURING ANY PART OF EXISTING STRUCTURES OR FINISHES BE DAMAGED DURING ANY PART OF STRUCTURES OR FINISHES BE DAMAGED DURING ANY PART OF STRUCTURES OR FINISHES BE DAMAGED DURING ANY PART OF OR FINISHES BE DAMAGED DURING ANY PART OF OR FINISHES BE DAMAGED DURING ANY PART OF FINISHES BE DAMAGED DURING ANY PART OF FINISHES BE DAMAGED DURING ANY PART OF BE DAMAGED DURING ANY PART OF BE DAMAGED DURING ANY PART OF DAMAGED DURING ANY PART OF DAMAGED DURING ANY PART OF DURING ANY PART OF DURING ANY PART OF ANY PART OF ANY PART OF PART OF PART OF OF OF THE DEMOLITION OR INSTALLATION THE CONTRACTOR SHALL BE RESPONSIBLE FOR DEMOLITION OR INSTALLATION THE CONTRACTOR SHALL BE RESPONSIBLE FOR DEMOLITION OR INSTALLATION THE CONTRACTOR SHALL BE RESPONSIBLE FOR OR INSTALLATION THE CONTRACTOR SHALL BE RESPONSIBLE FOR OR INSTALLATION THE CONTRACTOR SHALL BE RESPONSIBLE FOR INSTALLATION THE CONTRACTOR SHALL BE RESPONSIBLE FOR INSTALLATION THE CONTRACTOR SHALL BE RESPONSIBLE FOR THE CONTRACTOR SHALL BE RESPONSIBLE FOR THE CONTRACTOR SHALL BE RESPONSIBLE FOR CONTRACTOR SHALL BE RESPONSIBLE FOR CONTRACTOR SHALL BE RESPONSIBLE FOR SHALL BE RESPONSIBLE FOR SHALL BE RESPONSIBLE FOR BE RESPONSIBLE FOR BE RESPONSIBLE FOR RESPONSIBLE FOR RESPONSIBLE FOR FOR FOR REPAIRING DAMAGED STRUCTURES OR FINISHES.

AutoCAD SHX Text

1. BASE MAP INFORMATION WAS DERIVED FROM SITE PLANS PROVIDED BY THE MBTA BASE MAP INFORMATION WAS DERIVED FROM SITE PLANS PROVIDED BY THE MBTA MAP INFORMATION WAS DERIVED FROM SITE PLANS PROVIDED BY THE MBTA MAP INFORMATION WAS DERIVED FROM SITE PLANS PROVIDED BY THE MBTA INFORMATION WAS DERIVED FROM SITE PLANS PROVIDED BY THE MBTA INFORMATION WAS DERIVED FROM SITE PLANS PROVIDED BY THE MBTA WAS DERIVED FROM SITE PLANS PROVIDED BY THE MBTA WAS DERIVED FROM SITE PLANS PROVIDED BY THE MBTA DERIVED FROM SITE PLANS PROVIDED BY THE MBTA DERIVED FROM SITE PLANS PROVIDED BY THE MBTA FROM SITE PLANS PROVIDED BY THE MBTA FROM SITE PLANS PROVIDED BY THE MBTA SITE PLANS PROVIDED BY THE MBTA SITE PLANS PROVIDED BY THE MBTA PLANS PROVIDED BY THE MBTA PLANS PROVIDED BY THE MBTA PROVIDED BY THE MBTA PROVIDED BY THE MBTA BY THE MBTA BY THE MBTA THE MBTA THE MBTA MBTA MBTA FROM VARIOUS PROJECTS. AS SUCH, CONDUIT ROUTES, DISTANCES, AND EQUIPMENT VARIOUS PROJECTS. AS SUCH, CONDUIT ROUTES, DISTANCES, AND EQUIPMENT VARIOUS PROJECTS. AS SUCH, CONDUIT ROUTES, DISTANCES, AND EQUIPMENT PROJECTS. AS SUCH, CONDUIT ROUTES, DISTANCES, AND EQUIPMENT PROJECTS. AS SUCH, CONDUIT ROUTES, DISTANCES, AND EQUIPMENT AS SUCH, CONDUIT ROUTES, DISTANCES, AND EQUIPMENT AS SUCH, CONDUIT ROUTES, DISTANCES, AND EQUIPMENT SUCH, CONDUIT ROUTES, DISTANCES, AND EQUIPMENT SUCH, CONDUIT ROUTES, DISTANCES, AND EQUIPMENT CONDUIT ROUTES, DISTANCES, AND EQUIPMENT CONDUIT ROUTES, DISTANCES, AND EQUIPMENT ROUTES, DISTANCES, AND EQUIPMENT ROUTES, DISTANCES, AND EQUIPMENT DISTANCES, AND EQUIPMENT DISTANCES, AND EQUIPMENT AND EQUIPMENT AND EQUIPMENT EQUIPMENT EQUIPMENT LOCATIONS SHALL BE FIELD VERIFIED. 2. UNLESS OTHERWISE NOTED, WHEREVER A NORMAL PATH OF TRAVEL IS SCHEDULED UNLESS OTHERWISE NOTED, WHEREVER A NORMAL PATH OF TRAVEL IS SCHEDULED OTHERWISE NOTED, WHEREVER A NORMAL PATH OF TRAVEL IS SCHEDULED OTHERWISE NOTED, WHEREVER A NORMAL PATH OF TRAVEL IS SCHEDULED NOTED, WHEREVER A NORMAL PATH OF TRAVEL IS SCHEDULED NOTED, WHEREVER A NORMAL PATH OF TRAVEL IS SCHEDULED WHEREVER A NORMAL PATH OF TRAVEL IS SCHEDULED WHEREVER A NORMAL PATH OF TRAVEL IS SCHEDULED A NORMAL PATH OF TRAVEL IS SCHEDULED A NORMAL PATH OF TRAVEL IS SCHEDULED NORMAL PATH OF TRAVEL IS SCHEDULED NORMAL PATH OF TRAVEL IS SCHEDULED PATH OF TRAVEL IS SCHEDULED PATH OF TRAVEL IS SCHEDULED OF TRAVEL IS SCHEDULED OF TRAVEL IS SCHEDULED TRAVEL IS SCHEDULED TRAVEL IS SCHEDULED IS SCHEDULED IS SCHEDULED SCHEDULED SCHEDULED TO BE TEMPORARILY BLOCKED BY CONSTRUCTION, PROVIDE A TEMPORARY PATH OF BE TEMPORARILY BLOCKED BY CONSTRUCTION, PROVIDE A TEMPORARY PATH OF BE TEMPORARILY BLOCKED BY CONSTRUCTION, PROVIDE A TEMPORARY PATH OF TEMPORARILY BLOCKED BY CONSTRUCTION, PROVIDE A TEMPORARY PATH OF TEMPORARILY BLOCKED BY CONSTRUCTION, PROVIDE A TEMPORARY PATH OF BLOCKED BY CONSTRUCTION, PROVIDE A TEMPORARY PATH OF BLOCKED BY CONSTRUCTION, PROVIDE A TEMPORARY PATH OF BY CONSTRUCTION, PROVIDE A TEMPORARY PATH OF BY CONSTRUCTION, PROVIDE A TEMPORARY PATH OF BY CONSTRUCTION, PROVIDE A TEMPORARY PATH OF CONSTRUCTION, PROVIDE A TEMPORARY PATH OF CONSTRUCTION, PROVIDE A TEMPORARY PATH OF PROVIDE A TEMPORARY PATH OF PROVIDE A TEMPORARY PATH OF A TEMPORARY PATH OF A TEMPORARY PATH OF TEMPORARY PATH OF TEMPORARY PATH OF PATH OF PATH OF OF OF TRAVEL. SUBMIT THE PROPOSED PATH AND TIME PERIOD FOR DIVERSION FOR SUBMIT THE PROPOSED PATH AND TIME PERIOD FOR DIVERSION FOR SUBMIT THE PROPOSED PATH AND TIME PERIOD FOR DIVERSION FOR THE PROPOSED PATH AND TIME PERIOD FOR DIVERSION FOR THE PROPOSED PATH AND TIME PERIOD FOR DIVERSION FOR PROPOSED PATH AND TIME PERIOD FOR DIVERSION FOR PROPOSED PATH AND TIME PERIOD FOR DIVERSION FOR PATH AND TIME PERIOD FOR DIVERSION FOR PATH AND TIME PERIOD FOR DIVERSION FOR AND TIME PERIOD FOR DIVERSION FOR AND TIME PERIOD FOR DIVERSION FOR TIME PERIOD FOR DIVERSION FOR TIME PERIOD FOR DIVERSION FOR PERIOD FOR DIVERSION FOR PERIOD FOR DIVERSION FOR FOR DIVERSION FOR FOR DIVERSION FOR DIVERSION FOR DIVERSION FOR FOR FOR APPROVAL BY THE ENGINEER. THIS PATH SHALL BE A MINIMUM OF 36 INCHES WIDE BY THE ENGINEER. THIS PATH SHALL BE A MINIMUM OF 36 INCHES WIDE BY THE ENGINEER. THIS PATH SHALL BE A MINIMUM OF 36 INCHES WIDE THE ENGINEER. THIS PATH SHALL BE A MINIMUM OF 36 INCHES WIDE THE ENGINEER. THIS PATH SHALL BE A MINIMUM OF 36 INCHES WIDE ENGINEER. THIS PATH SHALL BE A MINIMUM OF 36 INCHES WIDE ENGINEER. THIS PATH SHALL BE A MINIMUM OF 36 INCHES WIDE THIS PATH SHALL BE A MINIMUM OF 36 INCHES WIDE THIS PATH SHALL BE A MINIMUM OF 36 INCHES WIDE PATH SHALL BE A MINIMUM OF 36 INCHES WIDE PATH SHALL BE A MINIMUM OF 36 INCHES WIDE SHALL BE A MINIMUM OF 36 INCHES WIDE SHALL BE A MINIMUM OF 36 INCHES WIDE BE A MINIMUM OF 36 INCHES WIDE BE A MINIMUM OF 36 INCHES WIDE A MINIMUM OF 36 INCHES WIDE A MINIMUM OF 36 INCHES WIDE MINIMUM OF 36 INCHES WIDE MINIMUM OF 36 INCHES WIDE OF 36 INCHES WIDE OF 36 INCHES WIDE 36 INCHES WIDE 36 INCHES WIDE INCHES WIDE INCHES WIDE WIDE WIDE WITH NO OBSTRUCTIONS AND REMAIN IN PLACE UNTIL THE NORMAL PATH OF TRAVEL NO OBSTRUCTIONS AND REMAIN IN PLACE UNTIL THE NORMAL PATH OF TRAVEL NO OBSTRUCTIONS AND REMAIN IN PLACE UNTIL THE NORMAL PATH OF TRAVEL OBSTRUCTIONS AND REMAIN IN PLACE UNTIL THE NORMAL PATH OF TRAVEL OBSTRUCTIONS AND REMAIN IN PLACE UNTIL THE NORMAL PATH OF TRAVEL AND REMAIN IN PLACE UNTIL THE NORMAL PATH OF TRAVEL AND REMAIN IN PLACE UNTIL THE NORMAL PATH OF TRAVEL REMAIN IN PLACE UNTIL THE NORMAL PATH OF TRAVEL REMAIN IN PLACE UNTIL THE NORMAL PATH OF TRAVEL IN PLACE UNTIL THE NORMAL PATH OF TRAVEL IN PLACE UNTIL THE NORMAL PATH OF TRAVEL PLACE UNTIL THE NORMAL PATH OF TRAVEL PLACE UNTIL THE NORMAL PATH OF TRAVEL UNTIL THE NORMAL PATH OF TRAVEL UNTIL THE NORMAL PATH OF TRAVEL THE NORMAL PATH OF TRAVEL THE NORMAL PATH OF TRAVEL NORMAL PATH OF TRAVEL NORMAL PATH OF TRAVEL PATH OF TRAVEL PATH OF TRAVEL OF TRAVEL OF TRAVEL TRAVEL TRAVEL IS RESTORED. IN ADDITION, SET BARRICADES, WARNING LIGHTS, AND OTHER RESTORED. IN ADDITION, SET BARRICADES, WARNING LIGHTS, AND OTHER RESTORED. IN ADDITION, SET BARRICADES, WARNING LIGHTS, AND OTHER IN ADDITION, SET BARRICADES, WARNING LIGHTS, AND OTHER IN ADDITION, SET BARRICADES, WARNING LIGHTS, AND OTHER IN ADDITION, SET BARRICADES, WARNING LIGHTS, AND OTHER ADDITION, SET BARRICADES, WARNING LIGHTS, AND OTHER ADDITION, SET BARRICADES, WARNING LIGHTS, AND OTHER SET BARRICADES, WARNING LIGHTS, AND OTHER SET BARRICADES, WARNING LIGHTS, AND OTHER BARRICADES, WARNING LIGHTS, AND OTHER BARRICADES, WARNING LIGHTS, AND OTHER WARNING LIGHTS, AND OTHER WARNING LIGHTS, AND OTHER LIGHTS, AND OTHER LIGHTS, AND OTHER AND OTHER AND OTHER OTHER OTHER PROTECTIVE DEVICES THAT ARE NECESSARY, IN THE JUDGEMENT OF THE ENGINEER, DEVICES THAT ARE NECESSARY, IN THE JUDGEMENT OF THE ENGINEER, DEVICES THAT ARE NECESSARY, IN THE JUDGEMENT OF THE ENGINEER, THAT ARE NECESSARY, IN THE JUDGEMENT OF THE ENGINEER, THAT ARE NECESSARY, IN THE JUDGEMENT OF THE ENGINEER, ARE NECESSARY, IN THE JUDGEMENT OF THE ENGINEER, ARE NECESSARY, IN THE JUDGEMENT OF THE ENGINEER, NECESSARY, IN THE JUDGEMENT OF THE ENGINEER, NECESSARY, IN THE JUDGEMENT OF THE ENGINEER, IN THE JUDGEMENT OF THE ENGINEER, IN THE JUDGEMENT OF THE ENGINEER, THE JUDGEMENT OF THE ENGINEER, THE JUDGEMENT OF THE ENGINEER, JUDGEMENT OF THE ENGINEER, JUDGEMENT OF THE ENGINEER, OF THE ENGINEER, OF THE ENGINEER, THE ENGINEER, THE ENGINEER, ENGINEER, ENGINEER, FOR THE PROTECTION OF THE FACILITY EMPLOYEES. 3. VERIFY ALL EXISTING DIMENSIONS, GRADES, AND MEASUREMENTS IN THE FIELD VERIFY ALL EXISTING DIMENSIONS, GRADES, AND MEASUREMENTS IN THE FIELD ALL EXISTING DIMENSIONS, GRADES, AND MEASUREMENTS IN THE FIELD ALL EXISTING DIMENSIONS, GRADES, AND MEASUREMENTS IN THE FIELD EXISTING DIMENSIONS, GRADES, AND MEASUREMENTS IN THE FIELD EXISTING DIMENSIONS, GRADES, AND MEASUREMENTS IN THE FIELD DIMENSIONS, GRADES, AND MEASUREMENTS IN THE FIELD DIMENSIONS, GRADES, AND MEASUREMENTS IN THE FIELD GRADES, AND MEASUREMENTS IN THE FIELD GRADES, AND MEASUREMENTS IN THE FIELD AND MEASUREMENTS IN THE FIELD AND MEASUREMENTS IN THE FIELD MEASUREMENTS IN THE FIELD MEASUREMENTS IN THE FIELD IN THE FIELD IN THE FIELD THE FIELD THE FIELD FIELD FIELD BEFORE COMMENCING WORK AND PROMPTLY NOTIFY THE ENGINEER OF ANY COMMENCING WORK AND PROMPTLY NOTIFY THE ENGINEER OF ANY COMMENCING WORK AND PROMPTLY NOTIFY THE ENGINEER OF ANY WORK AND PROMPTLY NOTIFY THE ENGINEER OF ANY WORK AND PROMPTLY NOTIFY THE ENGINEER OF ANY AND PROMPTLY NOTIFY THE ENGINEER OF ANY AND PROMPTLY NOTIFY THE ENGINEER OF ANY PROMPTLY NOTIFY THE ENGINEER OF ANY PROMPTLY NOTIFY THE ENGINEER OF ANY NOTIFY THE ENGINEER OF ANY NOTIFY THE ENGINEER OF ANY THE ENGINEER OF ANY THE ENGINEER OF ANY ENGINEER OF ANY ENGINEER OF ANY OF ANY OF ANY ANY ANY DISCREPANCIES. WHERE THE CLEAR INTENT OF THE NEW WORK IS TO MATCH WHERE THE CLEAR INTENT OF THE NEW WORK IS TO MATCH WHERE THE CLEAR INTENT OF THE NEW WORK IS TO MATCH WHERE THE CLEAR INTENT OF THE NEW WORK IS TO MATCH THE CLEAR INTENT OF THE NEW WORK IS TO MATCH THE CLEAR INTENT OF THE NEW WORK IS TO MATCH CLEAR INTENT OF THE NEW WORK IS TO MATCH CLEAR INTENT OF THE NEW WORK IS TO MATCH INTENT OF THE NEW WORK IS TO MATCH INTENT OF THE NEW WORK IS TO MATCH OF THE NEW WORK IS TO MATCH OF THE NEW WORK IS TO MATCH THE NEW WORK IS TO MATCH THE NEW WORK IS TO MATCH NEW WORK IS TO MATCH NEW WORK IS TO MATCH WORK IS TO MATCH WORK IS TO MATCH IS TO MATCH IS TO MATCH TO MATCH TO MATCH MATCH MATCH EXISTING CONDITIONS, THE FIELD CONDITIONS SHALL GOVERN. 4. ALL APPLICABLE LICENSE, INSURANCE, AND PERMITS NEED TO BE SUBMITTED PRIOR ALL APPLICABLE LICENSE, INSURANCE, AND PERMITS NEED TO BE SUBMITTED PRIOR APPLICABLE LICENSE, INSURANCE, AND PERMITS NEED TO BE SUBMITTED PRIOR APPLICABLE LICENSE, INSURANCE, AND PERMITS NEED TO BE SUBMITTED PRIOR LICENSE, INSURANCE, AND PERMITS NEED TO BE SUBMITTED PRIOR LICENSE, INSURANCE, AND PERMITS NEED TO BE SUBMITTED PRIOR INSURANCE, AND PERMITS NEED TO BE SUBMITTED PRIOR INSURANCE, AND PERMITS NEED TO BE SUBMITTED PRIOR AND PERMITS NEED TO BE SUBMITTED PRIOR AND PERMITS NEED TO BE SUBMITTED PRIOR PERMITS NEED TO BE SUBMITTED PRIOR PERMITS NEED TO BE SUBMITTED PRIOR NEED TO BE SUBMITTED PRIOR NEED TO BE SUBMITTED PRIOR TO BE SUBMITTED PRIOR TO BE SUBMITTED PRIOR BE SUBMITTED PRIOR BE SUBMITTED PRIOR SUBMITTED PRIOR SUBMITTED PRIOR PRIOR PRIOR TO THE WORK. 5.