EXHIBIT B - ASR SOW 12.3.2020 F.pdf

EXHIBIT B - AGENCY SPECIFIC REQUIREMENTS (ASR) (Ver 1 2 . 3 . 2 0 2 0) LESSOR:_____________ VA:______________ P a g e 1 | 7

Readjustment Counseling Service Vet Center EXHIBIT B - AGENCY SPECIFIC REQUIREMENTS (ASR)

The Department of Veterans Affairs is interested in leasing a minimum of 4,347 to a maximum of 4,777 (contiguous) net usable square feet (NUSF/ABOA) of clinical space for a Vet Center in the city of Wasilla, AK.

Space shall be available for use by Tenant (VA) for personnel, furnishings, and equipment to meet the needs for a Vet Center. Space design will provide maximum co-location of the staff providing services to our patients.

The space shall be of contiguous office space in a professional and aesthetically pleasing Building. Space offered must be in a quality building of sound and substantial construction, either a new, modernized building, or one that has undergone restoration or rehabilitation for the intended use. Space shall be located in a prime commercial office space with attractive, professional surroundings. Streets and public walkways shall be well maintained.

Preference is that all leased space be located on the first floor, however, space on upper floors will be permitted if there is a functioning elevator within 1,000 feet as determined by the LCO. (Lessor SHALL provide Elevator service within 24 hours notification IF any maintenance issues occur).

The lease shall be full serviced and follow the standard specifications and requirements for a Replacing Lease per the GSA Global Lease.

A. WAITING AREA ROOM REQUIREMENTS

1. Four (4) Double Electrical outlets (16 to 18 inches from the floor), location as determined by VA.

2. Two (2) Telecommunication outlets, location as determined by the VA.

3. All walls to have Chair Rail (28 to 32 inches) and corner guards, mounted at height determined by VA.

4. Direct window access to waiting area.

5. Restricted access or lockable door to clinic area.

6. Duress alarm.

7. One (1) dimmer light switch.

8. Laminate wood flooring per Vet Center Director’s selection.

9. Laminate wood flooring to continue through hallway/corridors.

10. Waiting area shall to be strategically located to give the office manager and/or team leader clear observation of waiting areas.

11. A wall hung stainless Bottle Filling Station & Single ADA Cooler will be provided in the suite waiting room.

12. Lessor shall provide and pay for basic cable at three locations in the leased property. Cable TV audio/video wall jack required backing and mounting materials for connection to a VA furnished television.

B. RESTROOM (MALE AND FEMALE)

1. All bathrooms shall meet handicap accessibility codes and will include grab bars at commode.

2. All bathrooms shall have a power assisted door that is operatized by a push pad.

3. Minimum one (1) accessible commercial grade water closet and lavatory.

4. Toilet paper dispenser shall be provided by the lessor installed within easy reach.

5. Mirror over sink, minimum of 24"x 36", shall be provided and installed by the lessor shall be installed.

6. Wall Mounted Soap Dispenser: Sinks shall be equipped with a wall mounted soap dispenser provided by the lessor.

7. Paper Towel Dispenser shall be provided by the lessor shall be installed near the sink.

8. Built-in waste receptacle.

9. Wall mounted coat rack shall be installed on the wall behind door.

10. Baby changing station.

11. One (1) GFCI electrical outlet.

12. Duress Alarm.

13. Tile Flooring per Vet Center Director’s selection.

14. Tile wall 4 foot up the wall with tile accent strip.

EXHIBIT B - AGENCY SPECIFIC REQUIREMENTS (ASR) (Ver 1 2 . 3 . 2 0 2 0) LESSOR:_____________ VA:______________ P a g e 2 | 7

C. RECEPTION AREA

1. Four (4) Double Electrical outlets, location as determined by VA.

2. Two (2) Telecommunication outlets, location as determined by the VA.

3. Minimum five (5) foot inch counter, with solid worksurface countertops utilizing concealed mounting brackets, where practicable. Under counter storage cabinets provided by others.

4. Contactor shall provide blocking to support upper storage cabinets. Upper storage cabinets will be provided by others.

5. Centralized check-in/check-out for efficient utilization of staff.

6. Reception area shall to be strategically located to allow the office manager and/or team leader clear observation of waiting areas.

7. Reception area shall to be contiguous with the Office Manager space.

8. Door from Office Manager space to Reception area for observation.

9. Direct access to waiting area.

10. Duress alarm.

11. One (1) dimmer light switch.

12. Carpet Squares or laminate wood flooring per Vet Center Director’s selection.

D. OFFICES (DIRECTOR, OFFICE MANAGER, COUNSELORS)

1. Sound Transmission Class (STC) rating of 50 shall be achieved. The sound resistant enclosures shall be designed to assure speech privacy and achieve an STC rating of 50.

2. Four (4) Double electrical outlets; one (1) per wall.

3. Two (2) telecommunication outlets.

4. Three (3) Coat hooks on the wall behind the door.

5. Duress Alarm.

6. One (1) Dimmer light switch.

7. Carpet Squares per Vet Center Director’s selection.

8. Positioning furniture to ensure safety the of clinical staff; provided easy egress or exist. Reference the conceptual drawing for furniture placement.

E. GROUP COUNSELING ROOM/ CONFERENCE ROOM

1. Sound Transmission Class (STC) rating of 50 shall be achieved. The sound resistant enclosures shall be designed to assure speech privacy and achieve an STC rating of 50.

2. Eight (8) Double Electrical outlets.

3. Three (3) Telecommunication outlets.

4. TV/Cable Outlet and separate electric outlet (middle of the wall 60 inches high) location as determined by VA.

5. Wall mounted TV holder to support 43 to 65 inch TV.

6. Three (3) Coat hooks on the wall behind the door.

7. Duress Alarm.

8. One (1) Dimmer light switch.

9. Carpet Squares per Vet Center Director’s selection.

10. Lessor shall provide and pay for basic cable at three locations in the leased property. Cable TV audio/video wall jack required backing and mounting materials for connection to a VA furnished television.

F. EMPLOYEE BREAK ROOM

1. All perimeter walls shall extend from floor slab to six inches above the ceiling grid and filled with fiberglass bat insulation to ensure acoustical privacy.

2. Six (6) Double Electrical outlets (refrigerator, microwave oven, two counter height, two 16” to 18” from floor)

3. Minimum of ten (10) feet of counter with base and overhead cabinets; double compartment sink.

4. Full size refrigerator.

5. Built-in Convection Microwave Oven.

6. Dishwasher.

7. Tile flooring per Vet Center Director’s selection.

EXHIBIT B - AGENCY SPECIFIC REQUIREMENTS (ASR) (Ver 1 2 . 3 . 2 0 2 0) LESSOR:_____________ VA:______________ P a g e 3 | 7

G. Janitorial/Utility Closet

1. Mop Sink.

2. Two (2) Double Electrical outlets.

3. Adjustable wire shelving on two walls.

4. Tile flooring per Vet Center Director’s selection.

H. SUPPLY/STORAGE ROOM

1. Six (6) Electrical outlets (two counter height, four 16” to 18” from floor)

2. Two (2) Telecommunication Outlets.

3. Tile or Laminate wood flooring per Vet Center Director’s selection.

4. Casework cabinetry and counter to be provided from another source.

I. SECURE STORAGE (FILES/SECURITY SYSTEM)

1. Room shall not be accessible through the ceiling to prevent up and over access.

2. Security system shall be located in this space.

3. Metal frame and door with dead lock pin, automatic locking upon entry and exit using Electronic Physical Access

Control Systems (PACS).

4. Intrusion Detection System with Alarm.

5. Room to have dedicated quad 120 outlets and two CAT 6A data cables required between building demarcation point and data closet, each to be marked with an identifiable number on both ends.

6. Door hinges inside the room door.

7. No windows or other openings.

8. Overhead lighting.

9. Fire Extinguisher required.

10. Four (4) Double Electrical outlets

11. Two (2) Telecommunication Outlets.

12. Tile or Laminate wood flooring per Vet Center Director’s selection.

J. DATA CLOSET

1. Minimum of 80 square feet.

2. All perimeter walls shall extend from floor slab to structural system (deck) to prevent up and over access.

3. No windows or other openings.

4. Room must be protected from weather.

5. Overhead lighting.

6. Metal frame and door with dead lock pin, automatic locking upon entry and exit for a secure room.

7. The data closet shall be secured to VA access only and not be shared with any other tenant. Core should be locked to the VA OIT closet key.

8. Room shall be temperature controlled and maintained at 69 degrees.

9. The contractor shall provide and install 2 relay racks “19 inch” width, with vertical cable management in between the racks. The racks should be not less than 45U height. The racks should be seismically bolted to the floor and grounded with wire #6. Minimum of 3 foot of clearance on at least 3 sides of the installed racks.

10. Two post rack, brand name/equal example: https://www.cdw.com/product/Panduit-Standard-rack- 45U/2382460?cm_cat=google&cm_ite=2382460&cm_pla=NA-NA-Panduit_RQ&cm_ven=acquirgy

11. Data racks shall have space to mount patch panels, data equipment, PBX and UPS.

12. The contractor shall install all patch panels on one side of the relay rack, leaving the secondary vacant and room for IT equipment.

13. Data racks shall have vertical and horizontal organizers affixed. The contractor will provide and install cable ladder within the Data Closet from the wall to the top of the relay racks, allowing for a pathway to conduits and 110 blocks.

14. The contractor shall provide and install an APC model UPS with NIC card, that is rack mountable, sufficient to support all OIT equipment. Brand name/equal example UPS, with the additional Battery pack for extended run time. SMX3000LV - APC Smart-UPS X 3000VA Rack/Tower LCD 100-127V

SMX120BP - APC Smart-UPS X 120V External Battery Pack Rack/Tower

EXHIBIT B - AGENCY SPECIFIC REQUIREMENTS (ASR) (Ver 1 2 . 3 . 2 0 2 0) LESSOR:_____________ VA:______________ P a g e 4 | 7

15. The contractor will provide and install conduit pathways from the Data Closet point of demarcation, to connect the building with AT&T or the local telephone company vaults.

16. The contractor will work with AT&T or the local exchange carrier (LEC) to bring in both fiber and copper infrastructure into the Data Closet.

17. Access to the closet will be restricted to include only those persons specifically authorized by VA OI&T, including facility lessors.

18. Please refer to the OIT Enterprise Facility IT Support Infrastructure Standards for details https://www.cfm.va.gov/til/ https://www.cfm.va.gov/til/dguide/OIT-InfrastrucStdTelecomSpaces.pdf

19. This is a reference and any questions can be directed to OIT.

OIT Requirements page breakdown

OIT Design Guide IT Support Infrastructure Standard

K. DATA JACKS (TO CONNECT INTO THE VHA NETWORK)

1. Standard Data Outlets: Each data outlet/device location will have four (4) cable runs that terminate on the high-density rack mounted patch panel. Each typical data outlet will be on a four-port base plate.

2. Wall Mounted Phones: Any jacks for wall mounted phones should have 1 data cable to support VoIP, and be on a 1 port metal plate, and accommodate RJ45.

Jack Conventions (VoIP)

3. Cabling must be installed according to BISCI standards.

4. All cabling shall be continuous runs with no splices and be less than 328’.

5. Patch Panels, jacks and cable shall all be rated at Cat 6A or higher and be tested and certified. A copy of the test results will be provided to the COR as a deliverable.

6. Must have the capability to add additional data locations as determined by occupants to be provided by the lessor within ten days from request.

7. VAMC can suggest a cable contractor if necessary.

8. Location of Data Outlets:

a. If the construction at the location of the data outlet is drywall, provide flush-mounted single-gang outlet boxes with four-port base plates and applicable wall device faceplates (cable to be installed behind drywall).

b. If the construction at the location of the data outlet is a solid wall, provide surface-mounted single-gang outlet boxes with four-port base plates and applicable wall device faceplates (cable to be installed in plastic wall mold equipped with protective insulator or sleeve).

c. Where modular furniture is used, the location of the data outlet will be in the baseboard of the furniture, where the networked equipment (computers, printers, etc.) will be located. Provide flush-mounted single gang outlet boxes with four-port base plates and applicable wall device faceplates. If flush-mounted single-gang outlet boxes cannot be used, then modular surface mount boxes will be used with four-port inserts. All cable runs in modular furniture will be through furniture wire baseboard ducts/conduit.

9. The contractor shall follow VA naming conventions attached at both the patch panel and wall plate. All labeling shall be easily visible and printed, hand-written labeling is prohibited.

L. DATA ELECTRONIC HEALTH RECORD MODERNIZATION (EHRM):

1. WAN Implementation Specifications and Considerations

a. Active-Active High Availability (HA) Redundancy in accordance with facility type per the VA Enterprise Local Area Network (LAN) Technical Architecture Standard Version 2.1, February 13, 2019 https://www.cfm.va.gov/til/dguide/OIT-InfrastrucStdTelecomSpaces.pdf

b. Encryption Protocol requires an end-to-end WAN encryption solution such that traffic from VA locations can go directly to Cerner enclave without having the encryption broken and re-encrypted

c. Power / Environmental / Switching / Topology Compliant with TIA-942 Rating 3

EXHIBIT B - AGENCY SPECIFIC REQUIREMENTS (ASR) (Ver 1 2 . 3 . 2 0 2 0) LESSOR:_____________ VA:______________ P a g e 5 | 7

d. End-to-End latency from the user desktop to Cerner Data Center of equal to or less than 90ms for Citrix connection

2. Local Area Networking (LAN)

a. Category 6A cable (CAT6A) unshielded twisted pair (UTP), with additional slack, as required, to relocate if telecommunications room (TR) wiring closet pending move. Otherwise, normal Building Industry Consulting Service International (BICSI) Standards;

b. Compliant with the BICSI standards (ANSI/NECA/BICSI 568, Standard for Installing Commercial Building Telecommunications Cabling and ANSI/TIA-1179-A Healthcare Facility Telecommunications Infrastructure for new installations)

1. New cable installations additionally shall be compliant with TIA 568.2-D, TIA TSB-184-A, and NFPA-70 Section 725.144 to prevent PoE heat accumulation.

a. Alternatively, new UTP cabling shall carry a UL listed "LP" (Limited Power) rating.

c. All patch cables shall be of equal or greater Category for copper, OM or OS level for fiber, to the highest in use in the TR or Data Center

d. Cable management shall be implemented for all patch cables in accordance with VA OIT Infrastructure

Standards for Telecommunications Spaces insuring proper bend radius, bundling, airflow, support and labeling

e. 1 GbE connectivity to desktops, and other EUD

f. End-to-End latency from the user desktop to Cerner Data Center of equal to or less than 90ms for Citrix connection

M. SECURITY:

Provide a level of security which reasonably deters unauthorized entry during regular and non-duty hours. The Government considers a security alarm reasonable. Overall security shall also include deterring loitering or disruptive acts in and around the space during duty hours. Tenant shall have security within the tenant space, separate from that of the general building security. Keys/cipher locks OR key fob/card reader capability for employee access. No public access to the offices will be allowed.

1. Security Alarm: The Lessor shall provide a security system, (at lessor’s expense) to alarm upon illegal entry or loitering in the leased space and to prevent unauthorized entry 24 hours per day, 7 days per week that alarms locally at the site and to a remote monitoring location. Alarm sensors required on all exterior doors and windows. A motion detector will be provided in the waiting rooms and the main corridor. The remote monitoring company shall be in the business full-time, shall be approved by the LCO, with all monitoring costs provided by the lessor through the annual rent. Updates for codes or names are included in the lease and shall be coordinated with the LCO or authorized representative. The lessor shall install a keypad to disarm the building as directed by the VA COR. The cost of security services will be factored into the lease.

The security system will be completely tested at least once per month by the lessor with a copy of the testing report sent to VA.

2. Duress alarm - Button wireless duress / panic button each duress button is to be supplied a mounting clip to be installed by the lessor. Supply and install a wireless receiver to interface with panel. Each duress button is to be an individual zone. Provide and install group rooms with hard-wired duress alarms.

3. Security Closet - Door shall have an automatic closure installed and deadbolt lock according to VA security regulations.

N. OTHER REQUIREMENTS:

1. Fully Serviced Lease.

2. Cable Television Service paid for/provided by the lessor through the annual rent.

3. Guest high speed internet WiFi paid for/provided by the lessor through the annual rent.

4. Suite Security Alarm System and Monitoring paid for/provided by the lessor through the annual rent.

5. Corridors shall be at minimum of 5 feet in clear width.

6. Front entrance door shall have a power assisted door that is operated by a push pad.

7. All rooms (except IT Closet) should be master keyed, locking mechanism should be on the inside of the frame, and locking mechanism must be approved by the VA.

EXHIBIT B - AGENCY SPECIFIC REQUIREMENTS (ASR) (Ver 1 2 . 3 . 2 0 2 0) LESSOR:_____________ VA:______________ P a g e 6 | 7

8. DRINKING FOUNTAIN: A wall hung stainless Bottle Filling Station & Single ADA Cooler will be provided in the suite waiting room. Complete cooler and bottle filling station in a consolidated space saving ADA compliant design.

9. EXTERIOR SIGNAGE: Lessor must provide, approved by the VA, an internally lighted sign with VA logo and words "Vet Center" on sign a minimum of 4 ft by 8ft legible from main serving road. Sign shall be a minimum of 24 inches above finished grade. Lessor shall develop and provide a complete exterior signage plan to include identification, directional, informational, and regulatory signage. Signage must comply with local municipality’s codes and specifications. Careful consideration of the location of monument signs shall be taken to avoid sight triangle encroachment. Lessor shall provide signage on the building/ door.

10. INTERIOR SIGNAGE: Lessor shall provide interior signage for and 10 x 2 inch standard aluminum wall sign (holder) for slide in name plates. Signage must state room number only.

11. SITE FLAGPOLE: A flagpole will be provided and installed by the Lessor at a location to be approved by the LCO.

The flagpole will be 25 foot (minimum height). Flagpole shall include adequate lighting to illuminate flag between dusk and dawn. Flagpole shall be protected from vehicular traffic. Lighting shall be controlled by a photocell device. The flag will be provided by the Government.

O. SOW/ASR Exhibits: Examples “Brand name or equal.”

1. Motion Towel Dispensers

P01.a. Agency Brochure A5 GP4075-enMotion Towel Dispensers.pdf

2. Security Keypad Alarm System

P01.b. Agency Brochure S8 Security Keypad GE CONCORD.pdf

3. Security System

P01.c. Agency Brochure Security System.pdf

4. Security Camera

P01.d. Agency Brochure S3 Honeywell security camera.pdf

5. Motion Sensors

P01.e. Agency Brochure S2 Honeywell Motion Sensors.pdf

6. Panic Button

P01.f. Agency Brochure S5 Panic Button HUB.pdf

7. Panic Button Wall Mount (restrooms)

P01.g. Agency Brochure S6 Panic Button Wall Mount.pdf

8. C-Readers HID (OIT)

EXHIBIT B - AGENCY SPECIFIC REQUIREMENTS (ASR) (Ver 1 2 . 3 . 2 0 2 0) LESSOR:_____________ VA:______________ P a g e 7 | 7

P01.f. Agency Brochure S7 c-readers HID.pdf

9. Interior Signage

P01.i Agency Brochure Interior Signage.pdf

10. Drinking Fountain

P01.g. Agency Brochure drinking fountain.pdf

11. Conceptual Floor Plan

Conceptual Floor Plan

The Performance Series rounds out Honeywell’s camera portfolio with a variety of indoor, outdoor and low light cameras that lets end users pick the perfect camera for virtually any installation. Perfect for a diverse range of applications, the Performance Series includes a wide range of high performing IR bullet cameras and mini-domes that are easy to install and even easier to use.

The HD73 is a true day/night rugged dome camera 20 integrated LEDs that switches from color to black and white mode. A mechanical IR cut filter within the camera switches capturing perfect color pictures by day and clear black and white images at night. The HD73 incorporates a 1/3" CCD that offers 530 TV lines of crisp, clear horizontal resolution. The cameras come equipped with 20 integrated LEDs and a built-in 3.8-9.5 mm IR corrected aspherical Vari-focal Auto Iris lens for increased optical versatility and no focus shift when the camera switches from day to night mode. The 3-D axis gimbal allows versatile positioning and instant centering of the video image. In addition, the lens is separated from the LEDs by an IR boot mechanism which eliminates internal IR glare.

The HD73 installs quickly and easily. It comes standard with a two-conductor pigtail that connects to the barrel connector so there is no need to cut wires during installation. It also features a video out port for easy focus. The HD73 is designed for use in challenging environments. It is IP66 rated for outdoor installations, but is ideal for indoors installations as well, mounting directly to a ceiling or wall.

Market Opportunities

The HD73 is a cost effective surveillance solution for applications that experience changing light conditions throughout the day and require extra illumination at night.

The HD73 offers a simple yet solid design that provides optimum performance for both indoor and outdoor applications including schools, colleges, universities, hospitals, commercial sites, industrial parks, airports, gated entrances, foyers, loading docks and driveways.

Features www.honeywellvideo.comHD73

• Super high resolution color: 530 TVL - 1/3" Sony Super HAD CCD

• True Day/night with 20 LEDs

• Photocell-controlled and powered by an array of 20 high-efficiency LEDs (850 nm)

• Photocell-controlled on/off switching of infrared illumination

• Built-in fixed 3.8-9.5 IR corrected aspherical Vari-focal Auto Iris lens

• Auto-iris lens to prevent overexposure and infrared “white out”

• User-friendly design for easy access and adjustment of camera settings

• Even distribution IR for optimal image capture

• Total effectiveness in zero lux environments

• IR LED visible range of ~50 ft. (15m)

• Vandal-proof and weather resistant housing with IP66 rating

• 3-D axis gimbal

• Video out port for setup

• Two-conductor pigtail is standard for connection to barrel connector

SUPER HIGH RESOLUTION TRUE DAY/NIGHT VANDAL DOME CAMERA

WITH VARI-FOCAL AUTO IRIS LENS AND INFRARED ILLUMINATORS

HD73

L/HD73D/D

July 2008 © 2008 Honeywell International Inc.

Honeywell Security Honeywell Video Systems 2700 Blankenbaker Pkwy, Suite 150 Louisville, KY 40299

1.800.796.CCTV (2288)

www.honeywell.com www.honeywellvideo.com

SPECIFICATIONS

Environmental

Temperature Operating: -4°F to 122°F (-20°C to 50°C) Storage: -49°F to 167°F (-45°C to 75°C)

Relative Humidity 0% to 90% non-condensing

Rating IP66

Regulatory

Emissions FCC, CE: (EN55022) Class A

Immunity CE: EN 50130-4

Safety EU: EN 60065

Ordering

HD73 1/3" CCD Integrated True Day/Night Super High Resolution IR Vandal Resistant Dome Camera, 530 TVL, 20 LEDs, 3.8-9.5 mm VFAI Lens, 12 VDC NTSC

HD73X 1/3" CCD Integrated True Day/Night Super High Resolution IR Vandal Resistant Dome Camera, 530 TVL, 20 LEDs, 3.8-9.5 mm VFAI Lens, 12 VDC PAL

Accessories

Power Supplies

HPT12DC500 12 VAC/500 mA Plug-in Regulated 2.1 mm Coaxial Plug UL Listed/CSA Certified

3.94" (100 mm)

1.86" (47.15 mm)

1.46" (37.0 mm)

0.66" (16.85 mm)

3.

1.

m

2.98" (75.7 mm)

2.

.7

5.71" (145 mm)

Operational

Video Standard NTSC, PAL

Scanning System 2:1 Interlace

Image Sensor 1/3" Sony HAD CCD sensor

Number of Pixels (H x V)

811 x 508 (NTSC) 795 x 596 (PAL)

Minimum Illumination 0.0 lux, operates in complete darkness

Horizontal Resolution 530 TVL

Video Output 1.0 Vp-p, composite @ 75 Ohms

Sync System Internal

S/N Ratio 50 dB or more (AGC Off)

Auto Gain Control On/Off

Automatic Electronic Shutter

1/60–1/100,000 second (NTSC) 1/50–1/100,000 second (PAL)

White Balance Auto

IR LEDs 850 nm, 20 LEDs IR Illumination Distance (dependent on scene refectance)

~50 ft. (15m)

BLC On/Off

Gamma 0.45

Lens Type Built-in fixed (f=3.8-9.5 mm VFAI)

Angle of View H: 62º - 28º V: 48º - 22º

Electrical

Input Voltage 12 VDC

Input Range 10-14 VDC

Power Consumption 4.5 W (max) with IR LEDs on

Mechanical

Dimensions See Diagram

Weight 1.86 lb (0.84 kg)

Construction Housing: Die Cast Aluminum Dome: Polycarbonate Finish: Light gray powder coating

Cable Entry One 3/4" (19.1 mm) NPT threaded opening on side

Connector

Main Video: BNC connector Aux Video: 2-pin connector for video test cable (supplied) Power Input: 2.1 mm Plug

HONEYWELL SECURITY & CUSTOM ELECTRONICS

Honeywell provides a sensor line that’s unsurpassed for quality, design and performance. Our field-proven, installation-friendly products, including PIRs, magnetic contacts, DUAL TECs® and FlexGuard®, the world's best-selling line of glassbreak detectors, extend the boundaries of sensor design and are rigorously challenged in test rooms built to exceed the toughest

SIA standards.

THIS SECTION INCLUDES:

Sensors

Motion Detectors

DUAL TEC

PIRs

V-Plex

Access Control Sensors

Environmental Sensors

Photoelectric Beams

Glassbreak Detectors

Indoor Sounders

Sounding Devices

Siren Drivers, Bells, and Boxes

Surface Mount Contacts

Recess Mount Contacts

Commercial Contacts

Hold-Up Switches

Door Cords

V-Plex Smoke Detectors

Strobes, Power Supplies

60 www.honeywell.com/security

Imagine never having to compromise between performance and false alarm prevention again.

More dealers are choosing Honeywell’s DUAL TEC sensors for this very reason.

The winning combination of microwave and PIR technologies enable the sensors to actually distinguish between real intruders and other environmental conditions.

For an alarm to occur with a DUAL TEC, both the PIR and the microwave sensor must “confirm” each other and detect an intruder within the defined protection area. The result? Optimum performance and minimal false alarms.

Honeywell offers a wide range of DUAL TECs—including sensors that provide up to 100 lbs. of pet immunity;

wall, ceiling or flush mount versions and anti-masking devices for high security applications. Choose from hardwired, wireless or V-Plex polling loop versions for the ultimate installation flexibility.

There is a DUAL TEC to suit any application, from residential and commercial to the most robust industrial environments.

By combining microwave and PIR technologies, Honeywell’s DUAL TEC sensors offer you the best of both worlds—superior detection and fewer false alarms.

DUAL TEC®...

THE BEST OF BOTH WORLDS

Sensors MOTION DETECTORS

DUAL TEC PIR/MICROWAVE

DT6100STC

Long Range DUAL TEC

• Range: 100' x 20'

• Map Signal Processing

• Temperature Compensation

• Fluorescent Light Filter

• Form C Relay

• Adjustable microwave and PIR settings

• Supervised microwave and PIR

• Trouble output

DT906

Long Range Anti Mask DUAL TEC

• Range: 200' x 15' and 120' x 10'

• Mirror Optics

• Dual coverage patterns - selectable

• Queue Logic event processing

• Selectable sensitivity modes

• Active infrared anti-mask system

• Self-test and continuous supervision

• 6' to 12' mounting height

• Zero Clearance bug guard

• Tampered

• Form C Relay

• Temperature Compensation

• ALSO AVAILABLE:

DT907 - without anti-mask

DT900

Long Range Anti Mask DUAL TEC

• Range: 90' x 70' and 50' x 40' selectable

• Mirror optics

• Dual coverage patterns - selectable

• Queue Logic event processing

• Selectable sensitivity modes

• Active infrared anti-mask system

• Self-test and continuous supervision

• 6' to 12' mounting height

• Zero Clearance bug guard

• Tampered

• Form C Relay

DT901 - without anti-mask

Commercial

MOTION DETECTORS

Honeywell offers the most comprehensive selection of motion detectors in the industry. From traditional PIRs to DUAL TECs, we have the right motion detector to meet any installation challenge in hardwired, wireless or V-Plex polling loop versions.

Wide Angle Lens Top View (DT-900 and DT-901 set for 27m(90’) range)

Barrier Lens - All Zones Top View (DT-906 and DT-907 set for 61m(200’) range)

Barrier Lens - All Zones Side View

Wide Angle Lens Side View (DT-900 and DT-901 set for 27m(90’) range)

Side View Barrier Lens

62 www.honeywell.com/security

Commercial

DT7550C

Anti-Mask DUAL TEC Motion Sensor

• Range: 50' x 60'

• Form C Relay

• Advanced DualCore Signal Processing

• K-Band technology for better pattern containment and pattern shaping

• Supervision-microwave, PIR and temperature compensation

• Uniform sensitivity optics

• Digital adaptive microwave thresholds

• Digital fluorescent light filter

• Anti-mask detection

• Dual Slope Temperature Compensation

• Patented Zero Clearance Black Bug Guard

• Patented mirror look down

• Trouble output relay

• Perfect when high security and system integrity are important

DT7450

Commercial DUAL TEC Motion Sensor

• Range: 50' x 60'

• Supervision-microwave, PIR and temperature compensation

• Patented Zero Clearance Black Bug Guard

DT7450C - Form “C” Relay

DT6360

Ceiling Mount DUAL TEC

• Range: 50' diameter 360° coverage

• 8' to 16' mounting height

• DualCore Micro-Based Processing

• Surface mount or flush mount

• Front and rear tamper switches

• Selectable pulse count

DT7235T

DUAL TEC Motion Sensor

• Range: 35' x 40'

• 100 lb. Animal Immunity

• No adjustments to set

• Sturdy, attractive housing

• Temperature compensation

• Microwave supervision

DT7435

DUAL TEC Motion Sensor

• 100 lb. animal immunity

• High security lens included

DT7435C - Form “C” Relay

DT515

MiniTek Motion Sensor

• Range: 15' x 15' or 360° x 15'

• ASIC-based PIR with S-Band microwave

• Wall, corner or ceiling mount

• Surface, flush mount or swivel mount

• Totally silent relay

• Selectable pulse processing

Commercial/Residential

64 www.honeywell.com/security

Sensors DUAL TEC FAMILY FEATURE CHART

Pet Im une to 100 lbs.

Coverage Pattern

Signal Processing

Optical Technology

M icrow ave Frequency Band icroprocessor

Environm ental Adaptation

Tem perature Com pensation

Digital Fluorescent Filter

Analog Fluorescent Filter

Anti-M asking

W alk Test M ode

PIR Sensitivity Adjustm ent ave Adjustm

Vertical/Horizontal Adjustm

Trouble Output

Tam per Sw itch(es)

Alarm Relay Form s

LED Indicators ave Supervision

PIR

Supervision

Recom ended M tg Height

Operating Tem perature (°c)

Input voltage (VDC) axim um Current (m a)

Sw ivel Bracket Options

F E

A T U

R E

S

DT7235T

DT7435

DT7450

DT7550C

DT435T

DT450T

DT640STC

DT660STC

DT6100STC

DT6360STC

DT7360

DT500

DT900/901

DT906/907

5897-35

Quest

2260SN

50'x40' 90'x70' Queue Event Logic

Uniform Sens

35'x40' 35'x40'

50'x60' 50'x60'

50' Diam

35'x30' 50'x40'

40'x40'

60'x60' 100'x20'

50' Diam

Std Dual Core

Adv

AP

irror

K

X

S

DT900 only

DT906 only

A,C

C

1LED

Tri-Color

3LEDs

7' 6"

8’ to 16’

7'6"

7'6" 8’ to 16’

6' to 12' 6' to 12'

-10 to 55

0 to 49

10 to 49

7.5 - 1 6

10 - 14.5 9 - 14

10 - 15 10 - 15

SM

B-10

Included Included

B-10T

Queue Event Logic

120'x10' 200'x15'

StdX••Adv

VPlex

2LEDs

7' to 8'

10 to 50

-10 - 15

998SB

StdS•Std auto

•••RF

2LEDs

•7'6"

0 to 60

3V battery

60'x75'

D

7000 S eries

4 S

6 S

9 S

V-Plex W ireless

Sensors DUAL TEC FAMILY FEATURES

FEATURES

Pet Immune to 100 lbs.:

Sensor is immune to pets and other animals with combined weight of 100 lbs when installation guidelines for pet immunity are followed.

Coverage pattern:

Length by width of area protected.

Signal Processing:

Analysis performed on PIR and microwave signals to determine alarm conditions.

• DualCore: Signals are analyzed in multiple domains, including amplitude, time, frequency and duration. Supports functions including diagnostics and other advanced false alarm features.

• C3: Correlates data from both channels simultaneously, instead of independently processing each

• MAP: Timing and sequence of signals are compared to settings for specific environments to qualify each channel individually

• Queue Event Logic: Pulse counting while looking for specific sequences of events

• Advanced: Pulse counting with timing relationships

• Standard: Basic pulse counting

Optical Technology:

Technology used to collect infrared radiation for PIR processing.

• Uniform Sensitivity: Fresnel lens that provides the same sensitivity at the edge of the pattern as exists directly in front of the sensor

• Split-Zone: Zones are split into two sub-zones where each sub-zone has half the sensitivity of a regular zone, requiring targets to be in both zones for an alarm

• Standard: Basic Fresnel lens

• Mirror: Basic mirror optics

Microwave Frequency Band:

Frequency at which the microwave signal is radiated and received. Higher frequencies generally penetrate non-metallic objects less than lower frequencies.

• S-Band: 2.54 GHz

• X-Band: 10.525 GHz

• K-Band: 24.125 GHz

Environmental Adaption:

Microwave thresholds are adapted either in hardware or digitally to remove the effect of low level interference such as ceiling fans.

Temperature Compensation:

Sensor automatically adjusts PIR thresholds and/or other parameters to adapt to change in ambient temperature relative to human body temperature.

• Standard: Compensates at ambient temperatures below body temperature

• Advanced: Compensates at ambient both below and above body temperature

Digital Fluorescent Light Filter:

Software algorithms provide infinite rejection of microwave interference due to fluorescent lights.

Analog Fluorescent Light Filter:

Hardware circuitry provides rejection of microwave interferences due to fluorescent lights.

Anti-Masking:

Detects intentional and accidental blocking of the PIR optics.

Walk Test Mode:

Determines the coverage pattern and functionality for both the PIR and microwave channels, usually through LED indicators.

PIR Sensitivity Adjustment:

Selectable option to change the PIR process sensitivity, usually through a DIP switch or jumper link.

Microwave Sensitivity Adjustment:

Selectable option to change the microwave sensitivity and/or range, usually through a potentiometer.

Vertical Adjustment:

Capability to adjust the vertical PIR detec-tor position relative to the optics, usually through a vertical shift in the PCB. Usually used to adjust range at different mounting heights, or accurately set the coverage pattern for different lenses or mirrors.

Horizontal Adjustment:

Capability to shift the PIR zones left or right by a few degrees. Usually used to locate potential false alarm sources, such as a heating vent between zones, or to aim the optics in a particular direction, such as a hallway.

Trouble Output:

Separate output used to indicate supervision failures and/or anti-mask detection to the control panel.

Alarm Relay Forms:

Type of output relay used to signal panel when an intrusion is detected.

• Form A: Two-terminal relay with

Normally Closed output when energized

• Form C: Three-terminal relay with both

Normally Closed and Normally Open outputs when energized

LED Indicators:

Light Emitting Didoes used to provide visual feedback about alarm state, supervision, walk test, and other modes of operation.

• 1 LED: Single red LED

• 3 LEDs: Red, green, yellow LEDs, usually with PIR and microwave channels associated with a specific color

Microwave Supervision:

Automatic self-test of microwave channel for proper operation.

PIR Supervision:

Automatic self-test of microwave channel for proper operation.

Recommended Mounting Height:

Suggested height to mount processor for optimal performance. Usually important for pet immune applications.

Operating Temperature:

Temperature range at which the sensor can be expected to provide adequate protection. UL certification may have a narrower range.

Input Voltage:

Voltage range at the terminal strip at which the sensor will operate. UL may have certified for a slightly narrower range.

Swivel Bracket Options:

Brackets used to mount sensors in installations that have special aiming or mounting heights.

66 www.honeywell.com/security

IS215TCE

Entry Level PIR

• Range: 40' x 40'

• Dual slope temperature compensation

• Microprocessor based

• Patented look down mirror

• Tamper switch

IS215T

Entry Level PIR

• Range: 40' x 40'

NEW

Top View Wide Angle Lens

IS216T-CUR

Curtain PIR

• Range: 33' x 5.5'

• Dual slope temperature compensation

• Microprocessor based

Top View Pet Immune Lens

Side View Pet Immune Lens

Top View Long Range Lens

Side View Long Range Lens

AURORA

Pet Immune PIR

• Range: 35' x 45'

• Pet immunity to 40 lbs.

• ASIC Signal Processing

• Ultra-low current

• Totally silent relay

• Bi-Directional Temperature Compensation

AURORA-LR – 75' x 10' long range lens AURORA-T – with tamper AURORA-PK – 6-pack

Sensors SURFACE MOUNT CONTACTS

68 www.honeywell.com/security

IS25100TC

Long Range PIR Detector

• Range: 100' x 20'

• Form C relay

• Alarm memory

• Case and wall tamper

IS2560

Wide Area PIR Detector

• Range: 60' x 85'

• ALSO AVAILABLE: IS2560TC

IS2535

Selectable Pet Immune PIR Detector

• 0, 40 or 80 lbs. selectable pet immunity

• ALSO AVAILABLE: IS2535TC

IS2500 Common Features

• 45º terminal blocks

• DIP switch programming

• Spare EOL terminals

• Automatic Walk Test mode

• Four sensitivity settings

• (2.3m to 2.7) 7’6” to 9’ mounting height

• Uniform Sensitivity Optics

• Patented Mirror Look Down

• SIA PIR-01 false alarm compliant

• EN50131-1 and TS50131-2-2 grade 2, class II

• Dual Slope Temperature compensation

• Works with SMB10 family of swivel brackets

• Microprocessor controlled

• Totally silent tamper proof relay

PIR

Recess Mount PIR Motion Sensor

• Range: 40' x 56' (12m x 17m) coverage pattern

• Fits single gang box or can be recessed into a wall

• Built in Signature Analysis pulse count reduces false alarms

• Horizontal and vertical adjustments

995PA – Pet Alley Lens, 40' x 56' 995LA – Long Range Lens, 70' x 8-1/2'

Long Range Lens

Long Range Lens

Pet Alley Lens

Standard (Wide-angle) Lens

Pet Alley Lens

Standard (Wide-angle) Lens

70 www.honeywell.com/security

IS280CM

360° Ceiling Mount PIR

• Range: 45' dia. @ 10' mounting height 50' dia. @ 12' mounting height

• Mounting heights from 8' to 12'

• Low profile housing

• Microprocessor-based signal processing

• Sealed optics chamber

• Can be mounted on a single gang-box

• Cover tamper

PIRs – CEILING MOUNT

Ceiling Mount PIR Motion Sensor

• Up to 36' (11m) diameter coverage pattern

• 360˚ look-down capability

• 8' to 12' mounting height

• Twist off cover for easy removal

• Locally and remotely controllable walk test LED

13 ft (4m)

7 ft (2.1m)

3 ft (0.9m)

22 ft (6.7m)

16.25 ft (4.95m)

8.75 ft (2.67m)

3.75 ft (1.14m)

27.5 ft (8.4m)

13 ft (4m)

22 ft (6.7m)

16.25 ft (4.95m)

27.5 ft (8.4m)

3 ft (0.9m)

3.75 ft (1.14m)

7 ft (2.1m)

8.75 ft (2.67m)

10 ft (3.1m)

8 ft (2.4m)

E D C B A B C D E

Top ViewTop View

MOTION SENSOR ACCESSORIES

LENS OPTIONS

• For use with DT7235, DT7435, DT7450, or DT7550 families

DT7000-PALK

Pet Alley Lens Kit Pet Alley for DT7235 and DT7435 Package of 10 lenses

MOUNTING BRACKETS

• For use with DT515, DT7XXX, DT6100, ISXXX and 5894PI series of detectors

SMB10

Swivel Mount Bracket

(pack of five)

SMB10C

Ceiling Mount Bracket

SMB10T

Tampered Swivel Mount Bracket

High Security LensLong Range Lens Pet Alley Lens

DT7000-LRLK

Long Range Lens Kit provides

– 50' x 10' when used with

DT7450/DT7550 or

– 35' x 8' when used with DT7235 or DT7435

– Package of 10 lenses

DT7000-HSLK

High Security Lens Kit provides

– 35' x 40' area protection

– To convert DT7235 or DT7435 to non-pet immune

– Package of 10 lenses

NEW NEW

4275EX-SN

V-Plex Mirror PIR Motion Sensor

• Range: 35' x 45' (11m x 14m) coverage pattern

• Built-in remote point module with serial number addressing

• Optional long range mirror included

• Extremely low current

• Tampered cover

4275EX - with DIP switch addressing

4278EX-SN

V-Plex Quad Mirror PIR Motion Sensor

• Range: 40' x 50' (12m x 15m) coverage pattern

• Built-in remote point module with serial number addressing

• Alternate polarity quad processing for improved false alarm immunity

• Horizontal adjustment for flexibility

• Long range mirror included

• Tampered cover

4278EX - with DIP switch addressing

V-Plex By utilizing only two wires, Honeywell’s patented V-Plex polling loop technology provides point identification to central monitoring stations, reduces wire runs and offers economical expansion of peripheral devices.

PIRs – V-Plex

72 www.honeywell.com/security

Side View Top View

Top View Wide Angle Mirror

Side View Wide Angle Mirror

Top View Long Range MirrorSide View Long Range Mirror

PIRs – V-Plex

QUEST2260SN

V-Plex DUAL TEC® Motion Sensor

• Range: 60' x 75'

• Serial number addressable

• Conditional Microwave Mode saves current in large installations

• Automatic adaptation to environmental disturbances

• Infinite rejection of fluorescent lights with patented digital filter

• Continuous microwave and PIR supervision

• Accu-Trak feature checks for environmental disturbances

• Smart sensor mode, speeds up Vplex bus while disarmed

998MX

V-Plex PIR Motion Sensor

• Range: 50' x 50'

• Dipswitch or S/N addressable

• Look-Down Zone

• Long Range Lens (100' x10') included

• Pet Alley Lens (50' X 70')

Standard Lens Pet Alley Lens

Sensors ACCESS CONTROL SENSORS

ACCESS CONTROL SENSORS

IS310

Request to Exit PIR

• Adjustable relay time

• Micro-based signal processing

• Adjustable tamper proof shutters provides precise target area

• Terminal block design

• Large wiring channel

• DIP switch programmable

• Two form “C” outputs

• AVAILABLE IN:

IS310WH – White IS310BL – Black RTE6PKWH – 6 Pack - White RTE6PKBK – 6 Pack - Black

Honeywell’s family of Request-to-Exit (RTE) access control sensors are available in both basic and full-featured models to suit any access control application. The quick-install RTEs are extremely flexible, provide a generous amount of wiring room and contain built-in internal shutters to guard against tampering.

All units share the same sleek, sophisticated look, letting you match the aesthetics of any room.

Tamper Terminal

Block Design

Largest Wiring

Channel

Sounder Adjustable Volume Control

Black Bug

Guard

DIP switch

Internal Tamperproof

Shutters

IS320

Request to Exit (RTE)

74 www.honeywell.com/security

IS320

Request to Exit PIR

• Same features as IS310 plus

• Piezo sounder

• Door contact input

• Reader/keypad/keyswitch input

• Remote arming and sounder inputs

• Door monitor and failsafe/secure modes

• AVAILABLE IN:

IS320WH – White IS320BL – Black

IS310 WHTP – Single Gang Trim Plate-White IS310 BLTP – Single Gang Trim Plate-Black

Sensors ENVIRONMENTAL SENSORS

ENVIRONMENTAL SENSORS

TS300

Dual Temperature Sensor

• Simultaneous operation of local and remote probes

• Local sensor 32˚ to 140˚ (0˚ to 60˚C) +/-3˚F (+/- 1.7˚C)

• Remote probe -40˚ to 140˚F (-40˚ to 60˚C) +/-4˚F (+/-2.2˚C)

• Programmable hysteresis prevents multiple alarms

• Local audio alarm with silence timeout

• Alarm memory (up to 8 events)

• Two programmable outputs

T280R/TS300R – Remote Temperature Probe

470-12 Water Sensor

• Will detect water or any conductive nonflammable liquid

• Ideal for placement by sump pumps, washing machines, kitchens, etc, where flooding is a possibility

• 12 VDC, low current drain

• Form C (SPDT) output

• Provided with two sensitivity settings for greater flexibility

• Includes one remote water probe 470PB

Vibration Contact

• Protects ceilings, walls, safes and glass

• Adjustable sensitivity

• Small and inconspicuous

11WH – white 11BR – brown

Wireless Temperature Sensor and Flood Detector

• Five selectable temperature ranges

• Local or remote temperature probe

• Up to ten year battery life

• Transmits supervisory, tamper and low battery

• Dimensions: 3" H x 1-1/2" W x 7/8" D

T280R – Remote Temperature Probe 470PB – Remote Water Probe

T280R

470PB

Sensors PHOTOELECTRIC BEAMS

76 www.honeywell.com/security

PHOTOELECTRIC BEAMS

Active Infrared Photoelectric Beams

• Single and dual beam models with range up to 250'

• Suitable for outdoor or indoor installations

• Easy alignment features reduce installation time

• Adjustable beam blocking time

• Includes pole mount kit

Honeywell’s IntelliBeam sensors combine all the great features of high-end photobeams in a cost-effective dual detector, offering the ultimate protection at an incredible value. Available in single and dual models, there’s an IntelliBeam to suit any application.

IB100D

Dual Photoelectric Beams

• 100' range max. outdoor

IB200D

Dual Photoelectric Beams

• 200' max. outdoor range

IB250S

Single Photoelectric Beams

• 250' range max. outdoor

FlexGuard lets you provide your customers with the highest level of security, unmatched detection and false alarm immunity without labor and installation headaches or costly service calls.

FlexGuard is also the industry’s most versatile glassbreak—the only one to offer a choice of hardwired, wireless or V-Plex polling loop technology for the ultimate in installation flexibility. It makes perimeter protection as easy to provide and trouble-free as any other part of the system.

FlexGuard detectors mount virtually anywhere—on walls, window frames or ceilings—and are UL and ULC listed for all glass types, including plate, tempered, laminated, wired, film-coated and sealed insulating.

Rigorously challenged in test rooms built to exceed the toughest standards, it’s no wonder there are more installed worldwide than any other brand of glassbreak.

Dealers worldwide rely on Honeywell’s

FlexGuard® glassbreak detectors as a first line of defense because they help keep intruders where they belong—outside.

GLASSBREAKS…

YOUR FIRST LINE OF DEFENSE

Sensors GLASSBREAK DETECTORS

78 www.honeywell.com/security

GLASSBREAK DETECTORS

FG1625

Glassbreak Detector

• FlexCore™ processing

• New hinged-case styling - nearly 180° opening

• Four adjustable sensitivity settings

• 25' range / no minimum range

• Remote test mode activation

• Protected PCB

• UL listed for coated and double-pane glass

FG1615 - Non-adjustable with 15' fixed range

FG1625T - Tamper / Form “C” Relay

FG1625F

Flush Mount Glassbreak Detector

• Flush mount design covers any single-gang electrical box

FGW1525FD - covers double-gang electrical boxes

Wireless Glassbreak Detector

• Set-up and performance identical to the FG1625

• Hinged-case styling - nearly 180˚ opening

• Easily replaceable batteries with up to 10 year battery life

• Four selectable sensitivity settings (max, medium, low & lowest)

• Covers all glass types

FG1625RFM

Flush Mount Glassbreak Detector

• Recess mounts in a 1" diameter hole in ceilings or walls

• Staggered “T” terminals for easy wiring

Sensors GLASSBREAK DETECTORS

FG730

• Dual Technology Flex-Audio Principle

• Signal verification

• 30' range

• UL listed for coated and double-pane glass

FG1625R

• Round case styling

FG1625RT - Tamper / Form “C” Relay

FG1625SN

V-Plex Glassbreak Detector

• Serial number addressable*

• Set-up and performance identical to the FG1625

*For use with Honeywell V-Plex addressable control panels.

FG1608

with Magnetic Contact

• Built-in magnetic contact

• High/Low sensitivity setting

• 8' range / no minimum range

• Magnetic contact gap: 7/8" make/ 2-3/16" break

FG1025Z

with Exclusion Zone

• Patented Time-of-Arrival processing with dual microphones improves false alarm immunity in its “Exclusion Zone”

ASC-SS1

Shock Glassbreak Detector

• Range: 8' maximum

• Mounts directly on glass surface

• Outstanding false alarm immunity

• Epoxy sealed against moisture and corrosion

• Glass types: plate, tempered, laminated, wired, coated, double-pane

Sensors GLASSBREAK DETECTORS & INDOOR SOUNDERS

80 www.honeywell.com/security

FGW1525T

Universal Wireless Glassbreak Detector

• Compatible with any 3.6 or 9 Volt wireless transmitter

• Easily replaceable batteries

5800SS1

Wireless Shock Glassbreak Sensor

• Perfect for kitchens, bathrooms, skylights and occupied areas

• Mounts directly on glass surface with 3M adhesive tape

• 10' detection range

• Pull battery tab and enroll no need to remove cover during installation

FG701

Glassbreak Simulator/Tester

• Compatible with all IntelliSense and

ADEMCO Glassbreak Detectors

• Remote test mode activation operates from 15' away*

• Calibrated signal output to allow true range verification

• Low battery announcement

• Digitally produced glassbreak sound

*When used with FG1500 and FG1600 Series Glassbreak Detectors

INDOOR SOUNDERS

WAVE2

Two-Tone Siren

• Attractive patented design fit single gang wall plate

• Snap-open hinged case cover for faster installation

• Louder (106 dB) dual tone siren output

• Terminal strip eliminates splicing and soldering

• Corner or ceiling mounting with no additional brackets or hardware

• Channeled case back for convenient wiring access

• UL Commercial Burglary

WAVE2PD

Two-Tone Piezo Dynamic Siren

• Half the weight of standard sirens

• 1/3 the current requirements of standard sirens

• Terminal strip eliminates soldering and splicing

• Snap-open hinged case cover for faster installation

WAVE2PDT - tampered version

WAVE

Speaker

• Attractive patented design fit single gang wall plate

• Snap-open hinged case cover for faster installation

• Two positions terminal block eliminates splicing and soldering

• Corner or ceiling mounting with no additional brackets or hardware

• Channeled or horizontal mounting for great versatility

• 8 ohms/15watts

Sensors INDOOR SOUNDERS & SOUNDING DEVICES

INDOOR SOUNDERS

WAVEF

Flush Mount Speaker

• Unique hinged case design allows for installation without disassembly

• Fits a standard double gang electric box

• Easy terminal block wire connections

• Attractive new design

• 10 watt power rating (15 watt peak)

WAVE2F

Two-Tone Flush Mount Siren

• Same performance as Wave 2

• Unique hinged case design allows for installation without disassembly

• Fits a standard double gang electric box

• Easy terminal block wire connections

• Attractive new design

Dual Tone Siren

• Extremely Loud (119dB)

• Smaller - mounts directly to wall or 4" electrical box

• Dual tone output - steady and warble

• Ready to mount -no disassembly required

• Tamper proof and weather resistant

• Attractive, can be used indoors or outdoors

• Snap on trim ring conceals screws

SOUNDING DEVICES

748LC

Dual Tone Siren

• Low current draw, 550mA@

12VDC (112dB) wall 4" electrical box

• Dual tone output -steady and warble

• Tamper proof and weather resistant

• Attractive, can be used indoors or outdoors

Speaker/Horn

• 8 ohms/20 watts (25 watts peak) wall or 4"…