Exhibit A - SPMYM326Q4076.pdf
PDF 100 KB Posted
- Attached to
- Hardware
- Solicitation number
- SPMYM326Q4076
About this file
This is a Contract Data Requirements List (CDRL) for a federal procurement of Flat Head 82 Degree Self-Locking Machine Screws under Contract No. 61814001-2, assigned to Requiring Office CODE 245. The CDRL specifies two data items that the contractor must submit with the material delivery.
Data Item A001 requires submission of a Certificate of Compliance certifying quality compliance, referencing Data Item Description DI-MISC-81356A and Contract Section C.2. This certification must be submitted one time with the material and distributed to one final copy recipient. Data Item A002 requires submission of Certification Data/Report for Chemical & Mechanical Certification, referencing DI-MISC-82386 and Contract Section C.3, also submitted one time with material delivery. The A002 certification must contain actual test results for all chemical and mechanical tests specified, with quantitative results in units required by the specification. Notably, paragraphs 6 and 8 of DI-MISC-82386 do not apply. Both data items require new untested fastener specimens for wedge tensile testing and yield strength testing, with evidence of testing the correct number of specimens. Each data item submission must be submitted under a separate shipment number, with payment and submission referencing Clauses 252.232-7006, 252.232-7003, or 52.232-36. The CDRL was prepared by Conrad Gagne on 06/30/2026 and approved by Edward Walsh on 07/30/2026.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFQ-SPMYM326Q4076 Hardware-Amended.docx | DOCX document | |
| Exhibit J - SPMYM326Q4076.pdf | ||
| Exhibit B - SPMYM326Q4076.pdf | ||
| Exhibit G - SPMYM326Q4076.pdf | ||
| Combined Synopsis Solicitation Hardware SPMYM326Q4076.docx | DOCX document | |
| Exhibit C - SPMYM326Q4076.pdf | ||
| Exhibit F - SPMYM326Q4076.pdf | ||
| Exhibit H - SPMYM326Q4076.pdf | ||
| Exhibit K - SPMYM326Q4076.pdf | ||
| DLAD-Local Notes and Clauses 4076.docx | DOCX document | |
| RFQ-SPMYM326Q4076 Hardware 61814001.docx | DOCX document | |
| Security Agreement For Protection of NNPI 4076.docx | DOCX document | |
| Exhibit D - SPMYM326Q4076.pdf | ||
| Exhibit E - SPMYM326Q4076.pdf |
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2C-1049-26 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP X TM ______ OTHER______
D. SYSTEM/ITEM
FLAT HEAD 82 DEGREE SLF LKG
MACHINE SCREW
E. CONTRACT/PR NO.
61814001-2
F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-82386
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
11. AS OF DATE
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 6 AND 8 of DI-MISC-82386 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical &
Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-82386, the requirements of the contract section titled, Marking and Certification
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY
CONRAD GAGNE Ext: 6797 245.2C
H. DATE
06/30/2026
I. APPROVED BY 245.2
7 / 3 0 / 2 0 2 6
X E D W A R D W A L S H
S i g n e d b y : W A L S H . E D W A R D . M . 1 4 1 1 0 4 8 0 3 5
J. DATE
07/30/2026
File details come from the government source that posted it. Updated .