Exhibit_2_-_Room_240_NRO.pdf

This document is an installation instruction manual for the PLACES/UNIGROUP TOO® 3 & 4 Circuit Base Feed Module, a modular power distribution component manufactured by Haworth.

The manual provides detailed installation guidance for integrating the base feed module into circuit base systems. It includes a floor plan layout for Room 240 showing three location areas (Location 1, 2, and 3) with permanent file cabinets, conference areas, and multiple office spaces. The installation instructions specify four primary steps: (1) slide access cover removal, (2) route cord through raceway, (3) plug base feed into power block, and (4) close raceway cover. Required tools include a screwdriver, flat-head tool, pointed tool, and Phillips #1 and #2 screwdrivers. Critical warnings address electrical safety hazards, including prohibition against interconnecting modular systems from different power feed units due to shock and fire risk, and mandatory disconnection of power during installation or component removal. The document specifies that licensed electricians must control circuit sizing and loading, and all connectors are color-coded and keyed to ensure proper polarity. Comprehensive wiring diagrams are provided for three-circuit separate neutrals, four-circuit 3+1, and four-circuit 2+2 configurations in both 208V/120V three-phase and three-wire single 120/240V phase applications. Customer service is available at 1-800-426-8562.