EVT0010607_RFQ_Mud_Jack.pdf

Office of Procurement and Contracts 900 SW Jackson St., Room 451 South Topeka, KS 66612

Phone: 785-296-2376 Fax: 785-296-7240 https://admin.ks.gov/offices/procurement-contracts

Adam Proffitt, Secretary Todd Herman, Director

Laura Kelly, Governor

Request for Quote (RFQ)

Bid Event Number: EVT0010607

Requisition ID: 0000243232

Date Posted: December 9, 2025

Closing Date: January 14, 2026, 2:00 PM CST

Procurement Officer: Phillip L. Curtis Telephone: 785-296-2985 E-Mail Address: phillip.l.curtis@ks.gov Web Address: http://admin.ks.gov/offices/procurement-contracts/

Agency: Kansas Department of Transportation

Item: Trailer Mounted Mud Pump/Mixer (Mud Jack)

This Bid Event was recently posted to the Procurement and Contracts Internet website.

The document can be downloaded by going to the following website:

http://admin.ks.gov/offices/procurement-contracts/

It shall be the bidder's responsibility to monitor this website on a regular basis for any changes/amendments.

Questions/Addenda: Questions requesting clarification of the bid must be submitted in writing to the Procurement Officer indicated above:

Before the end of the day, on December 23, 2025

Answers to questions will be available in the form of an addendum on the Procurement and Contracts' website, http://admin.ks.gov/offices/procurement-contracts.

It shall be the responsibility of all participating bidders to acquire any and all addenda and additional information as it is made available from the web site cited above. Vendors/Bidders not initially invited to participate in this Bid Event must notify the Procurement Officer (Event Contact) of their intent to bid at least 24 hours prior to the event's closing date/time. Bidders are required to check the website periodically for any additional information or instructions.

mailto:phillip.l.curtis@ks.gov http://admin.ks.gov/offices/procurement-contracts/ http://admin.ks.gov/offices/procurement-contracts/ http://admin.ks.gov/offices/procurement-contracts

Event ID: EVT0010607

Vendor Bid Submission

The Kansas Department of Administration, Office of Procurement and Contracts is currently open to the public and accepting both emailed and hand delivered bids.

All emailed bids must be submitted to Procurement@ks.gov. All bids submitted must be received by the Office of Procurement and Contracts by the specific bid closing date and time of 2:00PM CST.

Please note that you will receive an email that your documents were received, if you do not receive an email there may be an issue, please call 785-296-0002 to confirm that your bid package was received electronically.

Vendor Response Checklist

The following checklist is provided to assist bidders in ensuring all requirements are met and all required submissions are included with the bid. Bidders are instructed to utilize this list for their own convenience to ensure compliance.

THE FOLLOWING INSTRUCTIONS AND FORMS MUST BE

COMPLETED AND SUBMITTED WITH YOUR BID RESPONSE

If you do not submit them with your bid it may result in the rejection of the proposal

Completed Bidder Registration submitted prior to bid submission.

Requirements forms for Bid Proposal

Completed and signed Signature Sheet / page 3 of this document.

Completed Immigration Reform and Control Certification / page 4 of this document.

Completed Sexual Harassment Form / page 5 of this document.

Completed Boycott of Israel / page 6 of this document

Completed Certification of Procurement / page 7 of this document

Completed Tax Clearance Certificate / instructions located page 8 of this document.

Signed Copy of any Amendment(s), if applicable/ Located on the Bid Solicitation Website

- https://www.admin.ks.gov/offices/procurement-and-contracts/bid-solicitations - Under EVT0010607

Completed and signed Event Details document / Located on the Bid Solicitation Website -https://www.admin.ks.gov/offices/procurement-and-contracts/bid-solicitations - Under EVT0010607

Any other documentation bidder wants to include.

Completed Cost Sheet / page 12 of this document.

NOTE: In order to properly and completely respond to this Proposal, bidders MUST carefully review ALL sections and respond as required.

mailto:Procurement@ks.gov https://www.admin.ks.gov/offices/procurement-and-contracts/bid-solicitations https://www.admin.ks.gov/offices/procurement-and-contracts/bid-solicitations

Signature Sheet

Item: Trailer Mounted Mud Mixer/Pump Agency: Kansas Department of Transportation Closing Date: January 14, 2026, 2:00 PM

By submission of a bid and the signatures affixed thereto, the bidder certifies all products and services proposed in the bid meet or exceed all requirements of this specification as set forth in the request and that all exceptions are clearly identified.

Legal Name of Person, Firm or Corporation

Mailing Address City & State Zip

Toll Free Telephone Local

Cell Phone Fax Number

Tax Number

CAUTION: If your tax number is the same as your Social Security Number (SSN), you must leave this line blank.

DO NOT enter your SSN on this signature sheet. If your SSN is required to process a contract award, including any tax clearance requirements, you will be contacted by an authorized representative of the Office of Procurement and Contracts at a later date.

E-Mail

Signature Date

Typed Name Title

In the event the contact for the bidding process is different from above, indicate contact information below.

Bidding Process Contact Name

Mailing Address City & State Zip

Toll Free Telephone Local

Cell Phone Fax Number

E-Mail

If awarded a contract and purchase orders are to be directed to an address other than above, indicate mailing address and telephone number below.

Award Contact Name

Mailing Address City & State Zip

Toll Free Telephone Local

Cell Phone Fax Number

E-Mail

Certification Regarding Immigration Reform & Control

All Contractors are expected to comply with the Immigration and Reform Control Act of 1986 (IRCA), as may be amended from time to time. This Act, with certain limitations, requires the verification of the employment status of all individuals who were hired on or after November 6, 1986, by the Contractor as well as any subcontractor or sub-subcontractor. The usual method of verification is through the Employment Verification (I-9) Form. With the submission of this bid, the Contractor hereby certifies without exception that Contractor has complied with all federal and state laws relating to immigration and reform. Any misrepresentation in this regard or any employment of persons not authorized to work in the United States constitutes a material breach and, at the State’s option, may subject the contract to termination and any applicable damages.

Contractor certifies that, should it be awarded a contract by the State, Contractor will comply with all applicable federal and state laws, standards, orders and regulations affecting a person’s participation and eligibility in any program or activity undertaken by the Contractor pursuant to this contract.

Contractor further certifies that it will remain in compliance throughout the term of the contract.

At the State’s request, Contractor is expected to produce to the State any documentation or other such evidence to verify Contractor’s compliance with any provision, duty, certification, or the like under the contract.

Contractor agrees to include this Certification in contracts between itself and any subcontractors in connection with the services performed under this contract.

Signature, Title of Contractor: Date:

Policy Regarding Sexual Harassment

WHEREAS sexual harassment and retaliation for sexual harassment claims are unacceptable forms of discrimination that must not be tolerated in the workplace; and

WHEREAS state and federal employment discrimination laws prohibit sexual harassment and retaliation in the workplace; and

WHEREAS officers and employees of the State of Kansas are entitled to working conditions that are free from sexual harassment, discrimination, and retaliation; and

WHEREAS the Governor and all officers and employees of the State of Kansas should seek to foster a culture that does not tolerate sexual harassment, retaliation, and unlawful discrimination.

NOW THEREFORE, pursuant to the authority vested in me as Governor of the State of Kansas, I hereby order as follows:

1. All Executive Branch department and agency heads shall have available and shall regularly review and update at least every three years or more frequently as necessary, their sexual harassment, discrimination, and retaliation policies. Such policies shall include components for confidentiality and anonymous reporting, applicability to intern positions, and training policies.

2. All Executive Branch department and agency heads shall ensure that their employees, interns, and contractors have been notified of the state’s policy against sexual harassment, discrimination, or retaliation, and shall further ensure that such persons are aware of the procedures for submitting a complaint of sexual harassment, discrimination, or retaliation, including an anonymous complaint.

3. Executive Branch departments and agencies shall annually require training seminars regarding the policy against sexual harassment, discrimination, or retaliation. All employees shall complete their initial training session pursuant to this order by the end of the current fiscal year.

4. Within ninety (90) days of this order, all Executive Branch employees, interns, and contractors under the jurisdiction of the Office of the Governor shall be provided a written copy of the policy against sexual harassment, discrimination, and retaliation, and they shall execute a document agreeing and acknowledging that they are aware of and will comply with the policy against sexual harassment, discrimination, and retaliation.

5. Matters involving any elected official, department or agency head, or any appointee of the Governor may be investigated by independent legal counsel.

6. The Office of the Governor will require annual mandatory training seminars for all staff, employees, and interns in the office regarding the policy against sexual harassment, discrimination, and retaliation, and shall maintain a record of attendance.

7. Allegations of sexual harassment, discrimination, or retaliation within the Office of the Governor will be investigated promptly, and violations of law or policy shall constitute grounds for disciplinary action, including dismissal.

8. This Order is intended to supplement existing laws and regulations concerning sexual harassment and discrimination and shall not be interpreted to in any way diminish such laws and regulations. The Order provides conduct requirements for covered persons and is not intended to create any new right or benefit enforceable against the State of Kansas.

9. Persons seeking to report violations of this Order, or guidance regarding the application or interpretation of this Order, may contact the Office of the Governor regarding such matters.

Agreement to Comply with the Policy Against Sexual Harassment, Discrimination, and Retaliation.

I hereby acknowledge that I have received a copy of the State of Kansas Policy Against Sexual Harassment, Discrimination, and Retaliation established by Executive Order 18-04 and agree to comply with the provisions of this policy.

Signature and Date: Printed Name:

Certification of Company Not Currently Engaged in a Boycott of Goods or Services from Israel

In accordance with HB 2482, 2018 Legislative Session, the State of Kansas shall not enter into a contract with a Company to acquire or dispose of goods or services with an aggregate price of more than $100,000, unless such Company submits a written certification that such Company is not currently engaged in a boycott of goods or services from Israel that constitutes an integral part of business conducted or sought to be conducted with the State.

As a Contractor entering into a contract with the State of Kansas, it is hereby certified that the Company listed below is not currently engaged in a boycott of Israel as set forth in HB 2482, 2018 Legislature.

Signature, Title of Contractor Date

Printed

Name of Company

Certification of Company Not Currently Engaged in The Procurement or Obtainment of Certain Equipment, Services, or Systems

WHEREAS, pursuant to Public Law 115-232, Section 889 of the John S. McCain National Defense Authorization Act of 2019, “covered telecommunications equipment or services” is defined as:

(1) Telecommunications equipment produced by Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such entities).

(2) Video surveillance and telecommunications equipment produced by Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, and Dahua Technology Company (or any subsidiary or affiliate of such entities).

(3) Telecommunications or video surveillance services provided by such entities or using such equipment.

(4) Telecommunications or video surveillance equipment or services produced or provided by an entity that the Secretary of Defense, in consultation with the Director of the National Intelligence or the Director of the Federal Bureau of Investigation, reasonably believes to be an entity owned or controlled by, or otherwise connected to, the government of a covered foreign country.

WHEREAS, a “covered foreign country” means any of the following: (1) The People’s Republic of China,

(2) The Russian Federation, or (3) any country that is a state sponsor of terrorism1.

WHEREAS, foreign adversaries are increasingly creating and exploiting vulnerabilities in covered telecommunications equipment which store and communicate vast amounts of sensitive information and support infrastructure and emergency services, in order to commit malicious cyber-enabled actions.

WHEREAS, the unrestricted acquisition or use in the State of Kansas of covered telecommunications equipment designed, developed, manufactured, or supplied by persons owned by, controlled by, or subject to the jurisdiction or direction of foreign adversaries augments the ability of foreign adversaries to create and exploit vulnerabilities in technological equipment, services, or systems; and

WHEREAS, the State of Kansas has an interest in protecting itself against threats related to foreign adversary’s exploitation of vulnerabilities in covered telecommunications equipment.

THEREFORE, Contractor certifies that it shall not provide or procure to the State of Kansas or any agency thereof any covered telecommunications equipment either in whole or in part of any product or during the commission of any service.

FURTHERMORE, and notwithstanding any other contracts or agreements with Contractor, if Contractor has violated, misrepresented, or otherwise fails to comply with this certification document as determined by the State, the State may terminate any contract without penalty with Contractor immediately.

By signing the below, Contractor acknowledges and agrees to comply with the provisions of this policy.

CONTRACTOR

Signature, Title Date

1 Designations of a “state sponsor of terrorism” may be found at the U.S. Department of State website at:

https://www.state.gov/state-sponsors-of-terrorism/ https://www.state.gov/state-sponsors-of-terrorism/

Tax Clearance Instructions

A “Tax Clearance” is a comprehensive tax account review to determine and ensure that the account is compliant with all primary Kansas Tax Laws administered by the Kansas Department of Revenue (KDOR) Director of Taxation. Information pertaining to a Tax Clearance is subject to change(s), which may arise as a result of a State Tax Audit, Federal Revenue Agent Report, or other lawful adjustment(s).

To obtain a Tax Clearance Certificate, you must:

• Go to http://www.ksrevenue.org/taxclearance.html to request a Tax Clearance Certificate

• Return to the website the following working day to see if KDOR will issue the certificate

• If issued an official certificate, print it and attach it to your signed renewal document

• If denied a certificate, engage KDOR in a discussion about why a certificate wasn’t issued

Contractors must submit a current Tax Clearance Certificate along with the signed Renewal Document. No renewal will be processed unless a current Tax Clearance Certificate is submitted.

Per KSA 75-3740-(c), the Director of Purchases may reject the bid of any bidder who is in arrears on taxes due the State of Kansas. The Secretary of the Kansas Department of Revenue is authorized to exchange such information with the Director of Purchases as is necessary to determine a bidder’s tax clearance status, notwithstanding any other provision of law prohibiting disclosure of the contents of taxpayer records or information.

Please Note: Individual and business applications are available. For applications entered prior to 5:00 PM Monday through Friday, results typically will be available the following business day.

Tax clearance requests may be denied if the request includes incomplete or incorrect information.

Please Note: You will need to sign back into the KDOR website to view and print the official tax clearance certificate.

Information about Tax Registration can be found at the following website:

http://www.ksrevenue.org/busregistration.html http://www.ksrevenue.org/taxclearance.html http://www.ksrevenue.org/busregistration.html

Submission of Proposals

The Kansas Department of Administration, Office of Procurement and Contracts is currently open to the public and accepting both emailed and hand delivered bids.

All emailed bids must be submitted to Procurement@ks.gov . All bids submitted must be received by the Office of Procurement and Contracts by the specific bid closing date and time of 2:00PM CST.

Please note that you will receive an email that your documents were received, if you do not receive an email there may be an issue, please call 785-296-0002 to confirm that your bid package was received electronically.

All hand delivered bids must be received in our office prior to 2:00PM CST on the closing date at the address below to be considered.

Department of Administration

Procurement and Contracts

Proposal # EVT0010607

Closing Date: January 14, 2026, at 2:00pm CST

900 SW Jackson, Suite 451 South

Topeka, KS 66612-1286

Bids are not considered received until they are date and time stamped in the Office of Procurement and Contracts. The Office of Procurement and Contracts will not be responsible for late deliveries.

It is the responsibility of the bidder to ensure the bid date and time is met and the EVT number and company name is included in the subject line of the email. Bidders are encouraged to submit bids to the above email address no later than 1:45PM on the bid closing date. This allows time for staff to receive the bid and log it into our system prior to the bid closing at 2:00PM CST.

Invitation for Bids (IFB), Requests for Quotations (RFQ) will be publicly read as needed via telecom on the day following specified Bid Event Closing date beginning at 2:30pm CST.

Join on your computer or mobile app

Click here to join the meeting

Or call in (audio only)

+1 785-414-8630, 780766580# United States, Topeka, KS

Phone Conference ID: 780 766 580#

Tab sheet requests for Invitation for Bids (IFB), Requests for Quotes (RFQ) and A-Bids (ARCH) can be requested by emailing tabsheets@ks.gov. Please include the EVT or A-Bid number on your request. Tab sheets will be emailed within five (5) business days of the request.

NOTE: In order to respond to this Invitation for Bid, bidders must carefully review all sections and respond as required properly and completely.

For questions regarding confirmation that your bid has been received by the Office of Procurement and

Contracts, please call 785-296-2376.

https://admin.ks.gov/offices/procurement-contracts mailto:Procurement@ks.gov https://teams.microsoft.com/l/meetup-join/19%3ameeting_NGQ4OTg3NTYtODEwYS00OWJiLTllYTMtY2NlOTA5MjMxMDIx%40thread.v2/0?context=%7b%22Tid%22%3a%22dcae8101-c92d-480c-bc43-c6761ccccc5a%22%2c%22Oid%22%3a%221f80ed87-f92a-4df7-8e39-64ea24e21473%22%7d tel:+17854148630,,357404169# mailto:tabsheets@ks.gov https://admin.ks.gov/offices/procurement-contracts

1. SPECIFICATIONS

State Of Kansas

Kansas Department Of Transportation

Mud Mixer And Pump Unit, Trailer Mounted

The Kansas Department of Transportation is seeking competitive bids for the purchase of a Trailer Mounted Automated Mixer/Pump. The following specifications and dimensions shall apply.

The State reserves the right to waive minor technicalities under this specification. Federal and State laws supersede any conflicting part of this specification.

1.1. Specifications

The unit shall be a current model, new and unused, under standard production by the manufacturer. All parts utilized on the unit shall be new and unused.

The bidder agrees, if his proposal is accepted, to guarantee the design, material and workmanship of the unit bid according to the standard factory warranty, or for one year, whichever is greater. A copy of the warranty shall accompany the bid.

Complete specifications and literature on the unit bid shall accompany the bid. Any exceptions to these specifications shall be indicated on the bid or on a separate attachment to the bid, labeled as such.

Any “or equal” or “equivalent” items for brand specified components shall be listed with the bid package. Complete description and literature on the “or equal” components shall be supplied for consideration by the KDOT. The burden of proof regarding “or equal” items will be upon the vendor.

1.2. Pre-Delivery Service:

The unit shall be Delivered Complete And Fully Operational. It shall be properly serviced, free of leaks, and all mechanical adjustments made prior to delivery. A minimum of Three Days’ Notice Prior To Delivery shall be given to the person to whom the unit is to be shipped. All deliveries must be made between 9:00 am and 3:30 pm weekdays.

1.3. Technical Service:

The services of a competent technician, thoroughly trained in the use, operation and servicing of the unit, shall be furnished for a minimum period of one working day. The technician shall instruct the KDOT personnel in the proper use, safety, operation and preventive maintenance of the unit and to test the unit for satisfactory performance. This instruction shall be performed on a date to be agreed upon by the Shop Superintendent. It is required that the awarded vendor be able to complete the technical service, but this will be separated on the cost sheet. KDOT reserves the right to opt in or opt out for the technical service at time of award.

1.4. Printed Manuals:

One shop manual, parts manual, and operator manual shall be supplied with the unit.

1.5. PAINT:

All painted surfaces to be properly prepared, primed and painted. The manufactures standard factory paint and paint color will be acceptable with orange being the preferred color.

1.6. SHIPPING:

Prices shall be FOB DESTINATION, PREPAID AND ALLOWED (Included in the bid price), which means delivered to a state agency’s receiving dock or other designated point as specified in this contract or subsequent purchase orders without additional charge.

1.6.1. Deliver to 500 N. Hendricks, Hutchinson KS 67501

ITEM: CONCRETE MIXER AND PUMP UNIT, TRAILER MOUNTED

SHOW MFG. & MODEL OFFERED:

EXCEPTIONS TO

MFG. CODE SPECIFICATION SPECIFICATIONS

_____________ _____________ The unit shall be self-contained with a material hopper (5 cubic yards), Additive hopper material mixer and a high-pressure pump.

_____________ _____________ The unit shall be capable of mixing grout (3/8" minus material) and pumping this material

_____________ _____________ The unit shall be capable of mixing and pumping a slurry mixture of fine aggregate, cement, fly ash, and water to fill voids around and under structures.

_____________ _____________ The unit shall be capable of mixing and pumping a shotcrete mixture with up to 3/8” aggregate

_____________ _____________ The cement hopper is to accommodate 14–80-pound bags of Portland

Cement

_____________ _____________ One 40-gallon hydraulic reservoir to be included. This reservoir to be used for all 4 hydraulic components.

_____________ _____________ The trailer portion of the unit shall be constructed to safely transport the machine components at legal highway speeds.

_____________ _____________ KDOT reserves the right to require a successful demonstration of the unit before the award is made.

_____________ _____________ Unit to be a QMP05A TRL or approved equal.

PUMP UNIT:

_____________ _____________ Unit shall be capable of pumping 10 cubic yards per hour.

_____________ _____________ The maximum pump pressure shall be 750 PSI with variable output control.

_____________ _____________ The unit control shall be fitted with a mounted On/Off Pump Switch

_____________ _____________ Pump unit shall also be supplied with a hand-held Radio remote control

On/Off switch.

_____________ _____________ Double Cylinder Pump with 12” pumping tubes and 12” hydraulic pistons

_____________ _____________ Pump to be powered by 10 gpm hydraulic pump

_____________ _____________ Pump hopper to be 5 cubic foot minimum volume

_____________ _____________ Pump is to be powered by dedicated engine (27hp)

ADDITIVE HOPPER:

_____________ _____________ Additive hopper to have a capacity of 14-80 lbs. bags of Portland cement.

Electric vibrator to be mounted to side with push button control.

_____________ _____________ Additive hopper auger to be hydraulically powered with control lever positioned near conveyor and mixer control.

_____________ _____________ Additive hopper to be covered with a hinged steel cover with overlapping edges to prevent water intrusion.

MIXER UNIT:

_____________ _____________ The mixer unit shall have a capacity of 10 cubic feet, minimum.

_____________ _____________ The mixer shall be driven by a 4 GPM (minimum) hydraulic motor.

_____________ _____________ The mixer will have two separate hydraulic motors (one for each shaft).

Each shaft shall include 6 steel mixer paddles.

_____________ _____________ The mixer must include a discharge gate.

MIXER UNIT Continued:

_____________ _____________ The mixer must include a hinged cover with inlets for mixing water.

_____________ _____________ Hydraulic Mixer Control will be mounted near mixer.

WATER SYSTEM:

_____________ _____________ Unit shall have a high-pressure self-priming water pump and a low-pressure water pump, both electrically powered.

_____________ _____________ Water Tank must be minimum of 200 gallons. Tank shall include drain valve and hose reel and hose for wash down of unit.

MAIN MATERIAL HOPPER

_____________ _____________ Main Material hopper to hold 5 cubic yards of material. Hopper shall include tarp cover.

_____________ _____________ Main Material hopper to include hydraulically powered conveyor to move material into mixer.

_____________ _____________ Main Material hopper to include hydraulic control which is to be speed adjustable.

_____________ _____________ Adjustment window for conveyor chain to be visible from sides of hopper.

(adjustment included at front of hopper)

_____________ _____________ 2-Double door toolboxes approximately 48 inches wide, 24 inches tall, and

20 inches deep at bottom 20 shall be included welded to Material hopper on both sides of hopper.

DISCHARGE:

_____________ _____________ 25-foot pumping hose kit included with system.

1 5/8” pumping nozzle with handle included.

_____________ _____________ Grooved fitting to be supplied for easy removal of nozzle.

_____________ _____________ Y-pipe to be supplied to tie both pumping tubes together with snap couplings.

_____________ _____________ Protective steel bar to be installed to protect rear of pump during transport.

ENGINES:

_____________ _____________ The unit shall have two engines. One 27 hp minimum gasoline Fuel

Injected engine to power the pump unit and one 23.5 hp minimum gasoline engine to power Mixer, conveyor, and cement hopper. (additive hopper)

_____________ _____________ The electrical system shall be 12-volt D.C. with electric engine start on both engines.

_____________ _____________ Two Aluminum fuel tanks included with system. (one for each engine)

Each fuel tank shall have a capacity of 18-gallons, minimum.

TRAILER:

_____________ _____________ The tongue shall be equipped with a heavy duty pintle type hitch that is 31 inches from the ground with the unit level.

_____________ _____________ The tongue shall be equipped with a properly sized jack

_____________ _____________ The trailer shall have two 12,000-pound axles.

The trailer should have a 8’X20’ steel deck

_____________ _____________ The axles shall be designed to accommodate the most weight that the unit can safely and reliably haul.

_____________ _____________ The trailer shall be equipped with wheel fenders.

_____________ _____________ The unit shall be equipped with the appropriate clearance lights, rear identification lights with license bracket, reflectors, and directional lights all of which shall comply with the Motor Vehicle Laws of the State of Kansas.

_____________ _____________ Clearance Lighting to be installed at top of hopper. Retroreflective tape shall be on all 4 sides of hopper along top edge.

_____________ _____________ A seven-way electrical connector shall be furnished for connecting lights to the front of the trailer. The electrical connector shall meet SAE J560. An example connector is Cole-Hersee No. 1255.

_____________ _____________ The unit shall be equipped with air brakes with automatic breakaway protection system and safety chains of the appropriate size.

HYDRAULICS:

_____________ _____________ The hydraulic reservoir shall have a capacity of approximately 40 gallons with return and suction line oil filters using replaceable elements.

_____________ _____________ The hydraulic system shall have a pressure relief valve to bypass at high pressures.

_____________ _____________ Control valves for Additive Hopper, Mixer Unit, and Main Hopper shall be conveniently located at rear of trailer.

2. COST SHEET

Bidder Name:

The Contractor shall provide and deliver one Trailer Mounted Automated Mixer/Pump (mud jack) per specifications MS 11.9 to Hutchinson KS. - 500 N. Hendricks, Hutchinson KS 67501

Bid Schedule

Price for Mud Jack $____________________

Price for Technical Service $____________________

Total Bid $____________________

Lead Time For Delivery _________________________________________

SHOW MFG. & MODEL OFFERED _________________________________________

3. Contractual Provisions Attachment DA-146a Rev. 07/19

3.1. Important

The Provisions found in Contractual Provisions Attachment (Form DA-146a, Rev. 07-19), which is attached hereto, are hereby incorporated in this contract and made a part thereof. The parties agree that the following provisions are hereby incorporated into the contract to which it is attached and made a part thereof, said contract being the _____ day of _________________, 20____.

3.2. Terms Herein Controlling Provisions

It is expressly agreed that the terms of each and every provision in this attachment shall prevail and control over the terms of any other conflicting provision in any other document relating to and a part of the contract in which this attachment is incorporated. Any terms that conflict or could be interpreted to conflict with this attachment are nullified.

3.3. Kansas Law and Venue

This contract shall be subject to, governed by, and construed according to the laws of the State of Kansas, and jurisdiction and venue of any suit in connection with this contract shall reside only in courts located in the State of Kansas.

3.4. Termination Due to Lack of Funding Appropriation

If, in the judgment of the Director of Accounts and Reports, Department of Administration, sufficient funds are not appropriated to continue the function performed in this agreement and for the payment of the charges hereunder, State may terminate this agreement at the end of its current fiscal year. State agrees to give written notice of termination to contractor at least thirty (30) days prior to the end of its current fiscal year and shall give such notice for a greater period prior to the end of such fiscal year as may be provided in this contract, except that such notice shall not be required prior to ninety (90) days before the end of such fiscal year. Contractor shall have the right, at the end of such fiscal year, to take possession of any equipment provided State under the contract. State will pay to the contractor all regular contractual payments incurred through the end of such fiscal year, plus contractual charges incidental to the return of any such equipment. Upon termination of the agreement by State, title to any such equipment shall revert to contractor at the end of the State's current fiscal year. The termination of the contract pursuant to this paragraph shall not cause any penalty to be charged to the agency or the contractor.

3.5. Disclaimer of Liability

No provision of this contract will be given effect that attempts to require the State of Kansas or its agencies to defend, hold harmless, or indemnify any contractor or third party for any acts or omissions. The liability of the State of Kansas is defined under the Kansas Tort Claims Act (K.S.A. 75-6101, et seq.).

3.6. Anti-Discrimination Clause

The contractor agrees: (a) to comply with the Kansas Act Against Discrimination (K.S.A. 44 1001, et seq.) and the Kansas Age Discrimination in Employment Act (K.S.A. 44-1111, et seq.) and the applicable provisions of the Americans With Disabilities Act (42 U.S.C. 12101, et seq.) (ADA), and Kansas Executive Order No. 19-02, and to not discriminate against any person because of race, color, gender, sexual orientation, gender identity or expression, religion, national origin, ancestry, age, military or veteran status, disability status, marital or family status, genetic information, or political affiliation that is unrelated to the person's ability to reasonably perform the duties of a particular job or position; (b) to include in all solicitations or advertisements for employees, the phrase "equal opportunity employer"; (c) to comply with the reporting requirements set out at K.S.A. 44-1031 and K.S.A. 44-1116; (d) to include those provisions in every subcontract or purchase order so that they are binding upon such subcontractor or vendor; (e) that a failure to comply with the reporting requirements of (c) above or if the contractor is found guilty of any violation of such acts by the Kansas Human Rights Commission, such violation shall constitute a breach of contract and the contract may be cancelled, terminated or suspended, in whole or in part, by the contracting state agency or the Kansas Department of Administration; (f) Contractor agrees to comply with all applicable state and federal anti-discrimination laws and regulations; (g) Contractor agrees all hiring must be on the basis of individual merit and qualifications, and discrimination or harassment of persons for the reasons stated above is prohibited; and (h) if it is determined that the contractor has violated the provisions of any portion of this paragraph, such violation shall constitute a breach of contract and the contract may be canceled, terminated, or suspended, in whole or in part, by the contracting state agency or the Kansas Department of Administration.

3.7. Acceptance of Contract

This contract shall not be considered accepted, approved or otherwise effective until the statutorily required approvals and certifications have been given.

3.8. Arbitration, Damages, Warranties

Notwithstanding any language to the contrary, no interpretation of this contract shall find that the State or its agencies have agreed to binding arbitration, or the payment of damages or penalties. Further, the State of Kansas and its agencies do not agree to pay attorney fees, costs, or late payment charges beyond those available under the Kansas Prompt Payment Act (K.S.A. 75-6403), and no provision will be given effect that attempts to exclude, modify, disclaim or otherwise attempt to limit any damages available to the State of Kansas or its agencies at law, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

3.9. Representative's Authority to Contract

By signing this contract, the representative of the contractor thereby represents that such person is duly authorized by the contractor to execute this contract on behalf of the contractor and that the contractor agrees to be bound by the provisions thereof.

3.10. Responsibility for Taxes

The State of Kansas and its agencies shall not be responsible for, nor indemnify a contractor for, any federal, state or local taxes which may be imposed or levied upon the subject matter of this contract.

3.11. Insurance

The State of Kansas and its agencies shall not be required to purchase any insurance against loss or damage to property or any other subject matter relating to this contract, nor shall this contract require them to establish a "self-insurance" fund to protect against any such loss or damage. Subject to the provisions of the Kansas Tort Claims Act (K.S.A. 75-6101, et seq.), the contractor shall bear the risk of any loss or damage to any property in which the contractor holds title.

3.12. Information

No provision of this contract shall be construed as limiting the Legislative Division of Post Audit from having access to information pursuant to K.S.A. 46-1101, et seq.

3.13. The Eleventh Amendment

"The Eleventh Amendment is an inherent and incumbent protection with the State of Kansas and need not be reserved, but prudence requires the State to reiterate that nothing related to this contract shall be deemed a waiver of the Eleventh Amendment."

3.14. Campaign Contributions / Lobbying

Funds provided through a grant award or contract shall not be given or received in exchange for the making of a campaign contribution. No part of the funds provided through this contract shall be used to influence or attempt to influence an officer or employee of any State of Kansas agency or a member of the Legislature regarding any pending legislation or the awarding, extension, continuation, renewal, amendment or modification of any government contract, grant, loan, or cooperative agreement.