ESBD_File_349129_Main_Suite 638 Buildout Set_Addendum 01.pdf

SHEET INDEX

REVISION # SHEET # DRAWING TITLE

A-0.00 COVER SHEET

A-0.01 GENERAL INFORMATION

A-0.02 FINISH SCHEDULE

A-1.00 DEMOLITION PLAN (ENLARGED)

A-2.00 NEW CONSTRUCTION PLAN (ENLARGED)

M-1.00 MECHANICAL PLAN (ENLARGED)

E-1.00 ELECTRICAL PLAN (ENLARGED)

TYPICAL ROOM FINISHES, U.N.O.

ACT-1

PT-1

RB-1

CPT-1

GENERAL NOTES

G1. ALL CONTRACTORS SHALL BE RESPONSIBLE FOR VISITING THE PROJECT SITE & HAVING ASCERTAINED PERTINENT LOCAL CONDITIONS, SUCH AS LOCATION, ACCESSIBILITY, & GENERAL CHARACTER OF THE SITE & BUILDING. ALL CONTRACTORS SHALL THOROUGHLY UNDERSTANDS THE

CHARACTER & EXTENT OF PROPOSED WORK WITHIN & ADJACENT TO THE SITE.

G2. GENERAL CONTRACTOR TO COORDINATE ALL BLOCKING; LAYOUT DIMENSIONS & PENETRATIONS AS REQUIRED.

G3. ALL CONSTRUCTION MATERIALS, FIXTURES, FINISHES, ETC. ARE TO BE INSTALLED PER MANUFACTURER'S SPECIFICATIONS.

G4. CONTRACTOR TO PROVIDE PRODUCT CERTIFICATES & SHOP DRAWINGS OF ALL MILLWORK/CASEWORK & SAMPLES OF FINISHES & ARCHITECTURAL

SPECIALTY ITEMS FOR APPROVAL.

G5. CONTRACTOR TO PROVIDE WOOD BLOCKING BEHIND ALL WALL MOUNTED ITEMS.

G6. THESE DRAWING SHALL NOT BE SCALED FOR CONSTRUCTION PURPOSES. IN THE EVENT OF AN INCORRECT OR AN OMISSION OF NECESSARY

DIMENSIONS, CONTRACTOR SHALL NOTIFY PROJECT MANAGER.

G7. THE CONTRACTOR IS RESPONSIBLE FOR VERIFYING ALL DIMENSIONS PRIOR TO CONSTRUCTION & NOTIFY PROJECT MANAGER OF ANY

DISCREPANCIES THAT COULD EFFECT THE DESIGN AND FINISH OUT OF THE PROJECT.

G8. DO NOT SUSPEND ANY ITEMS FROM METAL ROOF DECKS, HORIZONTAL BRIDGING, X-BRACING, PIPES, CONDUITS, OR ANY OTHER WORK BY OTHER

TRADES.

G9. EACH CONTRACTOR SHALL COMPLY WITH ALL PROVISIONS OF ALL APPLICABLE LAWS CODES ORDERS OF PUBLIC OFFICIALS WITH JURISDICTION

FOR SAFETY, PERSON, AND/OR PROPERTY.

G10. VERIFY WITH MANUFACTURER OR SUPPLIER THE SIZE, LOCATION. AND CHARACTERISTICS OF ALL WORK AND EQUIPMENT THAT IS TO BE INSTALLED BY CONTRACTOR AND/OR OTHER CONTRACTORS & FURNISHED BY OWNER PRIOR TO ANY CONSTRUCTION PERTAINING TO THE SAME IS

BEGUN.

G11. WHERE MULTIPLE FINISHES ARE LISTED IN THE SAME ROOM, OR ON THE SAME WALL, REFER TO NEW CONSTRUCTION PLANS AND/OR ELEVATIONS

FOR APPLICATION.

G12. ELEC. SWITCH/OUTLET & COVER PLATE COLOR TO BE WHITE, U.N.O.

G13. REFER TO COVER SHEET FOR ALL TYPICAL ROOM FINISHES.

G14. ALL KEYED NOTES MAY NOT BE USED ON EVERY SHEET.

G15. THE PROJECT MANAGER IS TO BE NOTIFIED OF ALL CEILING HEIGHT CHANGES OR CONFLICTS THAT DO NOT COMPLY WITH THESE DRAWINGS.

G16. ALL WORKERS MUST BE SIGNED IN WITH SECURITY DAILY. THE CONTRACTOR, THEIR EMPLOYEES, & SUB-CONTRACTORS ARE CONFINE WORK ACTIVITY ONLY TO WORK AREAS AS NOTED. ALL OTHER AREAS WITHIN TWC FACILITIES ARE PROHIBITED.

G17. WORK WILL REQUIRE COORDINATION WITH EXISTING ELEMENTS; INCLUDING CARPET, LIGHT FIXTURES, HVAC DUCTS, WIRING, AND PIPING. SOME

ELEMENTS MAY REQUIRE RELOCATION TO ACCOMMODATE NEW CONSTRUCTION.

TYPICAL OFFICE

Texas Workforce Commission

BUILDING AREA KEY PLAN

AutoCAD SHX Text 101 East 15th Street Room 122 Austin, Texas 78778-0001 Phone (512) 463-6463 FAX (512) 463-4705

AutoCAD SHX Text Date

AutoCAD SHX Text Rev. No.

AutoCAD SHX Text A-0.00

AutoCAD SHX Text Project Name and Address:

AutoCAD SHX Text

COVER SHEET

AutoCAD SHX Text

PRINTED ON: 02/16/2024

AutoCAD SHX Text

MAIN BUILDING - 6TH FLOOR

AutoCAD SHX Text

101 EAST 15TH STREET

AutoCAD SHX Text

AUSTIN, TEXAS 78778-0001

SYMBOLS LEGENDABBREVIATIONS

A.D.A.

A.F.F.

ALUM.

CL

CLG

CLR

CG

CONC.

CONT.

CORR(S).

DIA

DIM

DWG

EA.

ELEV.

EQ.

EXP.

FIXT.

FLR

F.D.

F.E.

FIN. FL

FMS

GALV.

GYP.

HDWD

HVAC

IN.

INSUL.

INT.

MAX.

MTL.

MIN.

N.I.C.

N.T.S.

O.C.

O.H.

U.N.O.

OFCI

PREFAB.

PLYD

RCP

SCHED.

SIM.

SQ.

TYP.

W W/

W/O V.I.F.

VWC

VTC

AMERICANS WITH DISABILITIES ACT

ABOVE FINISHED FLOOR

ALUMINUM

CENTERLINE

CEILING

CLEAR

CORNER GUARD

CONCRETE

CONTINUOUS

CORRIDOR(S)

DIAMETER

DIMENSION

DRAWING

EACH

ELEVATION

EQUAL

EXPANSION

FIXTURE

FLOOR

FLOOR DRAIN

FIRE EXTINGUISHER

FINISHED FLOOR

FACILITY MANAGEMENT SYSTEM

GALVANIZED

GYPSUM BOARD

HARDWOOD

HEATING VENTILATION AIR CONDITIONING

INCH

INSULATION

INTERIOR

MAXIMUM

METAL

MINIMUM

NOT IN CONTRACT

NOT TO SCALE

ON CENTER

OPPOSITE HAND

UNLESS NOTED OTHERWISE

OWNER FURNISHED CONTRACTOR INSTALLED

PREFABRICATED

PLYWOOD

REFLECTED CEILING PLAN

SCHEDULED

SIMILAR

SQUARE

TYPICAL

WIDTH

WITH/

WITHOUT/

VERIFY IN FIELD

VINYL WALL COVERING

VINYL COMPOSITION TILE

NOTE:

1. ALL ABBREVIATIONS LISTED ABOVE MAY NOT BE USED ON

THIS PROJECT.

2. ABBREVIATIONS FOR FINISHES CAN BE FOUND ON THE

FINISH SCHEDULE.

CEILING FINISH

WALL FINISH

BASE FINISH

FLOOR FINISH

COUNTERTOP/CABINET FINISH

APPLICABLE KEYED NOTES

DENOTES EXTENT OF A

SPECIFIC WALL FINISH

REVISION TAG

SECTION/DETAIL TAG

ELEVATION TAGS

KEYED NOTE TAG;

RE: KEYED NOTES LEGEND

ON SAME SHEET

DEMOLITION NOTE TAG;

RE: DEMOLITION NOTES

LEGEND ON SAME SHEET

DOOR NUMBER TAG

GENERAL CONSTRUCTION NOTES

GC1. CONTRACTOR TO PROTECT ALL EXISTING SURFACES & EQUIPMENT AGAINST DAMAGE AND DUST. PROVIDE POLY BARRIERS & MAINTAIN NEGATIVE AIR ATMOSPHERE WITHIN CONTAINED WORK ARE AT ALL TIMES. A RAM BOARD PATH IS REQUIRED FROM ALL ELEVATORS TO WORKS SITE AND MUST

BE PUT DOWN AND TAKEN UP AT THE END OF EACH WORK SHIFT.

GC2. FINISHED WALLS TO MATCH EXISTING USING STANDARD ACCESSORIES; GALVANIZED STEEL OR ROLLED ZINC CORNERBEAD, 2" WIDE PAPER TAPE BEDDED WITH READY-MIXED, VINYL-BASED JOINT COMPOUND & FINISHED WITH READY-MIXED, VINYL-BASED JOINT COMPOUND TO LEVEL 4 FINISH.

GC3. PROVIDE INDIVIDUAL, PRINTED LABELS AT NEW RECEPTICLES & SWITCHES INDICATING THE CONNECTED CIRCUIT.

GC4. LABEL NEW, ABOVE CEILING JUNCTION BOXES, INDICATING THE CONNECTED CIRCUIT USING PERMANENT MARKER.

GC5. FIRE ALARM DEVICES TO BE HANDLED BY OTHERS.

GC6. CONTRACTOR TO PROVIDE BLANK FACEPLATES FOR UNUSED RECEPTACLES.

PAINT

P1. CONTRACTOR SHALL PROVIDE 0'-6"X0'-6" MOCK UPS OF EACH PAINT COLOR AND SEND TO PROJECT MANAGER TO CONFIRM EACH PRIOR TO

APPLICATION.

P2. MECHANICAL GRILLES AND WALL DIFFUSERS, ELECTRICAL PANELS, ACCESS PANELS, ETC. WHICH ARE EXPOSED IN FINISHED SPACES SHALL BE

PAINTED, IN PROPER PAINT FORMULATION, TO MATCH THE SURFACE ON WHICH THEY OCCUR.

P3. TYPICAL OVERALL PAINT FINISHES (U.N.O.):

WALLS: EGG SHELL/SATIN

TRIM: SEMI-GLOSS

CEILING: FLAT

CMU: SEMI-GLOSS

DOORS & FRAME: SEMI-GLOSS

P4. ALL TOILET WALLS, AND CEILING PAINTS SHALL BE WASHABLE, SEMI-GLOSS FINISH.

P5. CONTRACTOR TO ENSURE THAT PAINT FORMULATION IS APPROPRIATE TO SUBSTRATE WHICH IT IS APPLIED.

P6. ALL GYPSUM BOARD SOFFITS AND CEILINGS SHALL BE PAINTED PT-2 U.N.O. IN ELEVATIONS.

WOOD

W1. ALL HARDWOOD TO BE ALDER OR APPROVED EQUAL. IF ALDER IS UNAVAILABLE, SAMPLE OF ALTERNATE WITH STAIN APPLIED TO BE PROVIDED TO

PROJECT MANAGER.

W2. ALL WOOD DIMENSIONS SHOWN ARE NOMINAL.

W3. ALL STAIN GRADE CUSTOM MILLWORK TO BE WD-1, U.N.O.

TRIM

TR1. PROVIDE INSIDE AND OUTSIDE CORNER TRIM PIECES AT ALL COVE TILE BASE SPECIFICATIONS.

TR2. ALL HOLLOW METAL DOORS AND FRAMES SHALL BE PAINTED TO MATCH THE ADJACENT WALL COLOR IN PROPER PAINT FORMULATION U.N.O.

TR3. ALL VINYL OR RUBBER BASE SHALL BE ADHERED AT TOP, BOTTOM, AND ANY SEAMS.

TR4. ALL STANDING & RUNNING MILLWORK TRIM SHALL BE PAINTED PT-2, U.N.O.

FLOORING

F1. ALL FLOORING MATERIAL TRANSITIONS SHALL OCCUR AT CENTER OF OPENING DEPTH.

F2. ALL TRANSITIONS AT DOORS SHALL OCCUR AT CENTERLINE OF DOOR THICKNESS U.N.O.

F3. ALL VINYL AND FLOOR TILE PATTERNS SHALL BE CENTERED ON ROOM U.N.O. NOTED ON NEW CONSTRUCTION PLANS.

CASEWORK

C1. ALL EXPOSED INTERIOR SURFACED OF ALL CABINETRY TO BE FINISHED TO MATCH EXTERIOR, U.N.O.

C2. ALL SEMI-EXPOSED SURFACES TO BE CLEAR FINISH.

C3. ALL CABINETS WITH ADJUSTABLE SHELVES TO HAVE 6MM Ø HOLES AT 64MM ON CENTER VERTICALLY FOR SHELF SUPPORTS.

C4. ALL DRAWER GLIDES TO HAVE A MINIMUM 100 LBS CAPACITY AND FULL EXTENSION, U.N.O.

C5. ALL CABINETRY HINGES TO BE CONCEALED SELF CLOSING HINGES, U.N.O.

C6. HARDWARE PULLS AT ALL FRONT OF HOUSE COMMON AREAS:

EQ-1 (REFER TO LIST OF FINISHES FOR EXACT SPECIFICATION)

HARDWARE PULLS AT ALL BACK OF HOUSE COMMON AREAS:

EQ-2 (REFER TO LIST OF FINISHES FOR EXACT SPECIFICATION)

Texas Workforce Commission

AutoCAD SHX Text

PT-3

AutoCAD SHX Text

XX

AutoCAD SHX Text

CF-X.XX

AutoCAD SHX Text

XX

AutoCAD SHX Text

CF-X.XX

AutoCAD SHX Text

ENLARGED PLAN TAG

AutoCAD SHX Text

XX-X

AutoCAD SHX Text

XX-X

AutoCAD SHX Text

XX-X

AutoCAD SHX Text

XX-X

AutoCAD SHX Text

XX-X/XX-X

AutoCAD SHX Text X, X, X

AutoCAD SHX Text

XX/CF-X.XX

AutoCAD SHX Text 101 East 15th Street Room 122 Austin, Texas 78778-0001 Phone (512) 463-6463 FAX (512) 463-4705

AutoCAD SHX Text Date

AutoCAD SHX Text Rev. No.

AutoCAD SHX Text A-0.01

AutoCAD SHX Text Project Name and Address:

AutoCAD SHX Text

GENERAL INFORMATION

AutoCAD SHX Text

PRINTED ON: 02/16/2024

AutoCAD SHX Text

MAIN BUILDING - 6TH FLOOR

AutoCAD SHX Text

101 EAST 15TH STREET

AUSTIN, TEXAS 78778-0001

FINISH SCHEDULE

DATE: 7 November 2023

REVISED: 20 February 2024

LEGEND:

ACT

CG

CPT

EQ

FT

FWP

GL

MR

Acoustical Ceiling Tile Corner Guard Carpet (BL OR Modular) Equipment Floor Tile Fabric Wrapped Panel Glass Mirror

PL

PT

RB

RV

SC

STC

TB

TR

Plastic Laminate Paint Rubber Base Reveal Sealed Concrete Stained Concrete Tile Base Trim

VCT

VF

VWC

WB

WC

WF

WP

WT

Vinyl Composition Tile Vinyl Flooring (Tile, Plank, Sheet, etc.)

Vinyl Wallcovering Wood Base Wood Finish Wood Floor Wall Protection Wall Tile

KEY DESCRIPTION MANUFACTURER STYLE COLOR REMARKS REVISIONS

ACT-1 Acoustical Ceiling Tile USG Ceiling Solutions 2'0” x 2'0” Tegular Sandrift Location: Main Suite 642 --

ACT-2 Acoustical Ceiling Tile #755B 2'0" x 4'0"

Square Lay-In 15/16 in Grid Size

White Location: Main 653 --

EQ-1 Sensor Switch Acuity Controls LTH WSD-PDT-WH White Switches to be placed at height consistent with existing throughout.

Location limited to Main 653

02/20/24

EQ-2 Duplex Receptacles Hubbell CR20WHI White

See Electrical Plans for locations. Provide wire mold raceways at existing walls to match existing. To be place 15" A.F.F.

high. Connect to existing circuits as required.

EQ-3 Return Air Grille Hart & Cooley RE5T Series Aluminum Eggcrate

Return Air Grille #45500 22"x22" w/ Extended Framing for 24"x24"

White RE: Mech. Plan - M-1.00 for locations. --

EQ-4 Air Diffuser Accord Ventilation 961WI - T-Bar Steel 3-Cone Fixed-Pattern

High Volume Diffuser w/ Insulation White RE: Mech. Plan - M-1.00 for locations. --

GYP Gypsum board Fiberrock VHI (Very High ImPACT) Abuse-Resistant -- --

PT-1 Field Paint PPG/Monarch -- 511-3

Abbey White -- --

PT-2 Trim Paint PPG COMMERCIAL -- AC-4524 Black-Brown -- --

RB-1 Rubber Base ROPPE 700 Series Toe 4"

P193

BLACK BROWN -- --

Texas Workforce Commission

AutoCAD SHX Text Armstrong

AutoCAD SHX Text 101 East 15th Street Room 122 Austin, Texas 78778-0001 Phone (512) 463-6463 FAX (512) 463-4705

AutoCAD SHX Text Date

AutoCAD SHX Text Rev. No.

AutoCAD SHX Text A-0.02

AutoCAD SHX Text Project Name and Address:

AutoCAD SHX Text

FINISH SCHEDULE

AutoCAD SHX Text

PRINTED ON: 02/16/2024

AutoCAD SHX Text

MAIN BUILDING - 6TH FLOOR

AutoCAD SHX Text

101 EAST 15TH STREET

AutoCAD SHX Text

AUSTIN, TEXAS 78778-0001

AutoCAD SHX Text

AutoCAD SHX Text

02/20/24

5B

665A

651 645

646A

630 634

4A

4B

COPY

ROOM

5C

5D

Texas Workforce Commission

BUILDING AREA KEY PLAN

KEY DEMOLITION NOTES

1. REMOVE AND SALVAGE EXISTING DOOR AND FRAME. PATCH AND

PAINT ALL EFFECTED SURFACE TO MATCH ADJACENT FINISHES.

2. DEMOLISH EXISTING WALLS, PATCH, AND PAINT ALL EFFECTED

SURFACE TO MATCH ADJACENT FINISHES AS NEEDED.

AutoCAD SHX Text 101 East 15th Street Room 122 Austin, Texas 78778-0001 Phone (512) 463-6463 FAX (512) 463-4705

AutoCAD SHX Text Date

AutoCAD SHX Text Rev. No.

AutoCAD SHX Text

SCALE: N/A

AutoCAD SHX Text Floor Plan - Main Building

AutoCAD SHX Text A-1.00

AutoCAD SHX Text

AutoCAD SHX Text

DEMOLITION PLAN (ENLARGED)

AutoCAD SHX Text

AutoCAD SHX Text 02/16/2024

AutoCAD SHX Text

MAIN BUILDING - 6TH FLOOR

AutoCAD SHX Text

101 EAST 15TH STREET

AutoCAD SHX Text

AUSTIN, TEXAS 78778-0001

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

665A

651 645

646A

630 634

4A

COPY

ROOM

5C

5D

5B

665A

651 645

646A

630 634

4A

COPY

ROOM

5C

5D

Texas Workforce Commission

BUILDING AREA KEY PLAN

KEYED CONSTRUCTION NOTES

AutoCAD SHX Text 23'-5"

AutoCAD SHX Text 11'-8"

AutoCAD SHX Text 13'-4"

AutoCAD SHX Text 17'-6"

AutoCAD SHX Text 33'-11"

AutoCAD SHX Text 13'-2"

AutoCAD SHX Text 8'-4"

AutoCAD SHX Text 11'-8"

AutoCAD SHX Text 7'-5"

AutoCAD SHX Text 11'

AutoCAD SHX Text 101 East 15th Street Room 122 Austin, Texas 78778-0001 Phone (512) 463-6463 FAX (512) 463-4705

AutoCAD SHX Text Date

AutoCAD SHX Text Rev. No.

AutoCAD SHX Text

AutoCAD SHX Text Floor Plan - Main Building

AutoCAD SHX Text

SCALE: N/A

AutoCAD SHX Text

1. PROVIDE & INSTALL 3'-0" X 7'-0" TIMELY, OR EQUAL, DARK BRONZE PRE-FINISHED KD DOOR FRAME AND SOLID CORE MOHAWK PROVIDE & INSTALL 3'-0" X 7'-0" TIMELY, OR EQUAL, DARK BRONZE PRE-FINISHED KD DOOR FRAME AND SOLID CORE MOHAWK DOOR IN BIRCH CLEAR. USE HAGER, OR EQUAL, 4.5X4.5 HINGES. USE BEST 7K SERIES GRADE CYLINDRICAL LOCK, THAT ACCEPTS BEST 7-PIN INTERCHANGEABLE CORES. USE AB-FUCTION 15D LEVELR, 626 FINISH. USE DOOR STOP TRI 1211 STOP 613. ALL COMPONENTS LEVELR, 626 FINISH. USE DOOR STOP TRI 1211 STOP 613. ALL COMPONENTS TO MATCH EXISTING. 2. PROVIDE & INSTALL 3'-0" X 7'-0" HOLLOW-METAL DOOR FRAME & 20-MINUTE FIRE RATED SOLID CORE WILSONART DOOR IN WILD CHERRY LAMINATE FINISH. USE HAGER, OR EQUAL, 4.5X4.5 HINGES. USE BEST 9K SERIES GRADE CYLINDRICAL LOCK, THAT ACCEPTS BEST 7-PIN INTERCHANGEABLE CORES. USE AB-ENTRY FUCTION 15D LEVELR, 613 FINISH. USE DOOR STOP TRI 1211 STOP 613. USE FALCON SC-81 FC CLOSURE RWPA IN DARK BRONZE. ALL COMPONENTS TO MATCH EXISTING. 3. CONSTRUCT NEW WALL UP TO DECK. USE 5/8" TYP. GYMSUM BOARD AND 3" 5/8 STUDS 16" O.C. ON TRACK ABOVE CEILING GRID TYP. GYMSUM BOARD AND 3" 5/8 STUDS 16" O.C. ON TRACK ABOVE CEILING GRID AND 3" 5/8 STUDS 16" O.C. ON TRACK ABOVE CEILING GRID AND TILE. PROVIDE MINIMUM R-11 FIBERGLASS BATT INSULATION. FIRE-TAPE & FLOAT USING VINYL BASED JOINT COMPOUND TO LEVEL LEVEL 4 FINISH. TEXTURE AND PAINT TO MATCH EXISTING ADJACENT SURFACES. TEXTURE AND PAINT TO MATCH EXISTING ADJACENT SURFACES. 4. CONSTRUCT NEW WALLS, UP TO EXISTING CEILING, USING GALVANIZED STEEL TRACK & STUDS @ 16" O.C., PROVIDE MINIMUM R-11 FIBERGLASS BATT INSULATION AND 5/8" TYPE X GYPSUM DRYWALL ON EITHER SIDE. TAPE & FLOAT USING VINYL BASED JOINT COMPOUND TO LEVEL 4 FINISH. TEXTURE AND PAINT TO MATCH EXISTING ADJACENT SURFACES. 5. INFILL DOOR CAVITY, MATCH WIDTH OF ADJACENT WALL USING 3-5/8" X 25 GAUGE GALVANIZED STEEL TRACK & STUDS @ 16" O.C., PROVIDE MINIMUM R-11 FIBERGLASS BATT INSULATION AND 5/8" TYPE X GYPSUM DRYWALL ON EITHER SIDE. TAPE & FLOAT USING VINYL BASED JOINT COMPOUND TO LEVEL 4 FINISH. TEXTURE AND PAINT TO MATCH EXISTING ADJACENT SURFACES. 6. PROVIDE & INSTALL SINGLE-WIDTH ROUGH IN JUNCTION BOX & 3/4" CONDUIT ABOVE CEILING LINE FOR VOICE & LAN LOCATIONS, CABELING BY OTHERS. PROVIDE WIRE MOLD RACEWAYS AT EXISTING WALLS, TO BE PLACED AT 15" A.F.F. HEIGHT. PROVIDE & INSTALL BLANK FACEPLATES. 7. PAINT ALL WALL SURFACES WITHIN ESTABLISHED WORK AREA. ONE COAT PRIME OF PVA PRIMER. FOR INTERIOR WALLS AND OFFICES: USE TWO COATS OF SHERWIN WILLIAMS FINISH COAT, PROMAR 200, ZERO VOC INTERIOR LATEX PAINT. FOR CORRIDOR WALLS: USE TWO SHERWIN WILLIAMS FINISH COAT, PROMAR 200, ZERO VOC INTERIOR LATEX PAINT. FOR CORRIDOR WALLS: USE TWO FINISH COAT, PROMAR 200, ZERO VOC INTERIOR LATEX PAINT. FOR CORRIDOR WALLS: USE TWO PROMAR 200, ZERO VOC INTERIOR LATEX PAINT. FOR CORRIDOR WALLS: USE TWO . FOR CORRIDOR WALLS: USE TWO COATES OF PPG FINISH COAT, SPEEDHIDE ZERO INTERIOR ZERO VOC LATEX PAINT. PPG FINISH COAT, SPEEDHIDE ZERO INTERIOR ZERO VOC LATEX PAINT. FINISH COAT, SPEEDHIDE ZERO INTERIOR ZERO VOC LATEX PAINT. PEEDHIDE ZERO INTERIOR ZERO VOC LATEX PAINT. 8. MOVE FIRE ALARM TO NEW WALL. TO BE DONE BY OTHERS. 9. CEILING HEIGHT TO MATCH EXISTING AT OFFICES AND OPEN OFFICE AREA. 10. INSTALL NEW BASEBOARD AT NEW OR REPAIRED WALLS. 11. USE SALVAGED DOOR AND FRAME IF POSSIBLE

AutoCAD SHX Text

NEW CONSTRUCTION PLAN (ENLARGED)

AutoCAD SHX Text A-2.00

AutoCAD SHX Text

PRINTED ON: 02/16/2024

AutoCAD SHX Text

MAIN BUILDING - 6TH FLOOR

AutoCAD SHX Text

101 EAST 15TH STREET

AutoCAD SHX Text

AUSTIN, TEXAS 78778-0001

AutoCAD SHX Text

AutoCAD SHX Text 02/20/24

AutoCAD SHX Text

665A

651 645

646A

630 634

4A

COPY

ROOM

5C

5D

5B

665A

651 645

646A

630 634

4A

COPY

ROOM

5C

5D

Texas Workforce Commission

LEGEND

EXISTING 24"x48" RECESSED LIGHT

BAR. ADJUST AS NEEDED.

EXISTING 24"x24" RECESSED LIGHT

BAR. ADJUST AS NEEDED.

EXISTING 24''X24''; SUPPLY DIFFUSER.

ADJUST AS NEEDED.

KEYED MECHANICAL NOTES

1. PROVIDE SUPPLY DIFFUSER, MANUAL VOLUME DAMPER, AND DUCT WORK. FLEXIBLE

DUCT WORK SHALL BE SUSPENDED FROM OVERHEAD STRUCTURE AND NOT REST ON LIGHT

FIXTURES. TAP INTO THE EXISTING DUCT WORK.

2. PROVIDE AND INSTALL 2'X2' TRANSFER GRILL FOR RETURN AIR AS PER THE REFLECTED

CEILING PLAN.

3. LIGHT FIXTURES CAN BE ADJUSTED AS NEEDED DURING CONSTRUCTION.

AutoCAD SHX Text 101 East 15th Street Room 122 Austin, Texas 78778-0001 Phone (512) 463-6463 FAX (512) 463-4705

AutoCAD SHX Text Date

AutoCAD SHX Text Rev. No.

AutoCAD SHX Text

AutoCAD SHX Text Floor Plan - Main Building

AutoCAD SHX Text

SCALE: N/A

AutoCAD SHX Text M-1.00

AutoCAD SHX Text

MECHANICAL PLAN (ENLARGED)

AutoCAD SHX Text

PRINTED ON: 02/16/2024

AutoCAD SHX Text

MAIN BUILDING - 6TH FLOOR

AutoCAD SHX Text

101 EAST 15TH STREET

AutoCAD SHX Text

AUSTIN, TEXAS 78778-0001

AutoCAD SHX Text 02/20/24

AutoCAD SHX Text

665A

651 645

646A

630 634

4A

COPY

ROOM

5C

5D

5B

665A

651 645

646A

630 634

4A

COPY

ROOM

5C

5D

Texas Workforce Commission

GENERAL ELECTRICAL NOTES

1. THIS PLAN IS ISSUED WITH THE INTENT OF PROVIDING THE CONTRACTOR WITH

DESIGN INFORMATION AVAILABLE AT THIS PHASE. THIS PLAN DOES NOT COVER ALL

CONSTRUCTION ISSUES. ADDITIONAL INFORMATION WILL BE SUBMITTED

THROUGHOUT THE COURSE OF THE CONSTRUCTION PROCESS.

2. ELECTRICAL AND DATA CONNECTIONS TO BE AT 15" A.F.F. U.N.O.

LEGEND

DUPLEX ELEC.

RECEPTACLE

(EXISTING)

DUPLEX ELEC.

RECEPTACLE

DATA CONNECTION

SINGLE POLE

SWITCH

TV LOCATION

(EXISTING)

BUILDING AREA KEY PLAN

AutoCAD SHX Text 101 East 15th Street Room 122 Austin, Texas 78778-0001 Phone (512) 463-6463 FAX (512) 463-4705

AutoCAD SHX Text Date

AutoCAD SHX Text Rev. No.

AutoCAD SHX Text

AutoCAD SHX Text Floor Plan - Main Building

AutoCAD SHX Text

SCALE: N/A

AutoCAD SHX Text E-1.00

AutoCAD SHX Text

ELECTRICAL PLAN (ENLARGED)

AutoCAD SHX Text E

AutoCAD SHX Text

TV

AutoCAD SHX Text E

AutoCAD SHX Text

PRINTED ON: 02/16/2024

AutoCAD SHX Text

MAIN BUILDING - 6TH FLOOR

AutoCAD SHX Text

101 EAST 15TH STREET

AutoCAD SHX Text

AUSTIN, TEXAS 78778-0001

AutoCAD SHX Text E

AutoCAD SHX Text

TV

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text 02/20/24

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text