ESBD_442575_1754077346494_1112121_Specifications.pdf

TPWD Project 1112121

Black Gap WMA Bunkhouse Restroom Repairs

Material Selections and Samples

05-30-2025

Selected Material Selections shown herein are a 'basis of design' or to be selected as equal or better.

The regional management of the Wildlife division has requested that materials and products used in this project be available from local sources for the ease of possible future maintenance. Most of the selected materials and products are available at the local McCoy's in Alpine, TX.

The project is funded from a Federal Grant, whose Terms and Conditions contain the Buy America provision established in the Build America Buy America Act for the required use of American Iron, Steel, Manufactured Products, and Construction Materials for Infrastructure. Note : the materials and products herein have not been source checked for compliance with the Buy America provision.

100% CDs Final

Install into custom wood frame

Division 9: Finishes

Division 10: Specialties closest plan example regular toilet stall's door

ADA toilet stall's door

Get free delivery on orders over $50 with code FREEDELIVERY. See details.

My Store: Alpine Open Today 7am-7pm

Home / Kitchen & Bath / Bathroom Safety / Grab Bars & Rails

Boston Harbor

SG01-01&0142 Safety Grab Bar, 42 in L Bar, Stainless Steel, Wall Mounted Mounting Sku: 23151508

$42.99 Pay in 4 interest-free payments of $10.75. Learn more

1 Add to Cart

2 Available at Alpine Location: Aisle 22

This commercial grade grab bar is perfect for assisting the elderly, the disabled, the rehabilitation patient or anyone needing additional support and it meets ADA-compliance It has a 500 lbs weight-pull capacity and a concealed screws design.

42 in Heavy-duty commercial grab bar Made of stainless steel with a 1-1/2 in tubing Dia Suitable for bath and shower safety Meets ADA-compliant 500 lbs weight-pull capacity Concealed screws design

Type Straight

Projection Size 1.5

Bar Length 42

Mount Flange Diameter 3

Finish Stainless Steel

Color Stainless Steel

Material Thickness 20 gauge (1.0 mm)

Length 42 (Including Flange)

Width 3

Height 3.38

Mounting Type Wall Mounted

Weight 2.77

Includes Screws

SHOW US WHAT YOU'RE WORKING ON! #MCCOYSBUILDS

Description

Features

Specifications

Division 10: Specialties https://www.mccoys.com/free-delivery https://www.mccoys.com/stores/alpine-tx https://www.mccoys.com/stores https://www.mccoys.com/shop https://www.mccoys.com/shop/kitchen-bath https://www.mccoys.com/shop/c/108103000000000000/bathroom-safety https://www.mccoys.com/shop/c/108103103000000000/grab-bars-rails https://www.mccoys.com/shop/search/?searchtext=Boston%20Harbor https://www.facebook.com/mccoysbuildingsupply https://www.facebook.com/mccoysbuildingsupply https://twitter.com/BornToBuild https://twitter.com/BornToBuild https://www.youtube.com/user/mccoysbuildingsupply https://www.youtube.com/user/mccoysbuildingsupply https://www.pinterest.com/mccoysboard/ https://www.pinterest.com/mccoysboard/ https://www.linkedin.com/company/mccoy-corporation/ https://www.linkedin.com/company/mccoy-corporation/ https://www.instagram.com/mccoysbuildingsupply/ https://www.instagram.com/mccoysbuildingsupply/ https://www.mccoys.com/ https://www.mccoys.com/ https://www.mccoys.com/ https://www.mccoys.com/shop/cart

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 10/24/24S/B

The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2024 by Bobrick Washroom Equipment, Inc.

Technical Data continued . . .

2'' 50mm

2-1/4'' 55mm

3-1/8'' 80mm

5/16'' 8mm

Snap Flange Cover

3-1/4'' 85mm Dia.

1-1/2'' 38mm

End Mounting Flange

3-1/8'' 80mm

Intermediate Flange

2-5/8'' 65mm

2-1/4'' 55mm

3-1/8'' 80mm

STRAIGHT GRAB BARS,

1¼" (32mm) DIAMETER

B-5806

SERIES

Satin-finish, slip-resistant surface.

Peened surface; add suffix .99 to model number

Specify Finish Required:

L

L

HORIZONTAL VERTICAL

Standard B-5806 Series Grab Bars

Satin Finish Model Peened Surface Model Length

B-5806x12 B-5806.99x12 12" (305mm)

B-5806x18 B-5806.99x18 18" (455mm)

B-5806x24 B-5806.99x24 24" (610mm)

B-5806x30 B-5806.99x30 30" (760mm)

B-5806x36 B-5806.99x36 36" (915mm)

B-5806x42 B-5806.99x42 42" (1065mm)

B-5806x48 B-5806.99x48 48" (1220mm)

ADA/ICC/CBC Installation Guidance Horizontal Grab Bars Recommended Mounting Heights:

*ADA/ICC/CBC: 33" min. to 36"above finished floor (AFF)

Vertical Grab Bars Toilet Compartments Recommended Mounting Heights:

**ADA/ICC/CBC: Centerline of lower flange 39" min. to 41"above finished floor (AFF)

Shower Compartments Recommended Mounting Heights:

**ADA/ICC/CBC: Centerline of lower vertical grab bar 3" to 6" above gripping surface of horizontal grab bar. Centerline of vertical grab bar is 4” maximum from compartment entry.

*For more information regarding recommended mounting heights, please refer to Bobrick Planning Guide for Accessible Restrooms, page 21.

**For more information regarding recommended mounting heights, please refer to Bobrick Planning Guide for Accessible Restrooms, pages 21, 30, and 32.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-5806 r10/24/24S/B

The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2024 by Bobrick Washroom Equipment, Inc.

MATERIALS:

Grab Bar — 18-8, Type-304, 18-gauge (1.2mm) stainless steel tubing with a satin-finish, slip-resistant surface. 1-1/4" (32mm) outside diameter. Ends are heliarc welded to concealed mounting flanges. Clearance between the grab bar and wall is 1-1/2" (38mm).

Concealed Mounting Flanges — 18-8, Type-304, 11-gauge (3.2mm) thick, stainless steel plate; end flanges 2" x 3-1/8" (50 x 80mm) with holes for attachment to wall. Intermediate flanges 2-5/8" x 3-1/8" (65 x 80mm) wide x 3-1/8" (80mm) diameter.

Snap Flange Covers — 18-8, Type-304, 22-gauge (0.8mm) drawn stainless steel with satin-finish. 3-1/4" (85mm) diameter x 5/8" (16mm) deep. Each cover snaps over mounting flange to conceal mounting screws.

STRENGTH:

Bobrick grab bars that provide 1-1/2" (38mm) clearance from wall can support loads in excess of 900 pounds (408kg) if properly installed. Other grab bar configurations can support loads in excess of 250 pounds (113kg) if properly installed, complying with accessible design (including ADAAG in the U.S.A.) for structural strength.

Safety Warning: Grab bars are no stronger than the anchors and walls to which they are attached and, therefore, must be firmly secured in order to support the loads for which they are intended. To avoid potential injury, the building owner or maintenance personnel should remove the grab bar from service if the grab bar is not adequately secured to wall or if there is any observed damage to the welds.

INSTALLATION:

Provide concealed anchor device or backing as specified or required in accordance with local building codes before wall is finished. Fasten concealed mounting flanges to anchor device or backing with at least two screws opposing each other in each flange. Snap flange covers over each mounting flange to conceal mounting screws. Concealed anchor devices and mounting screws are not included with Bobrick grab bars and must be specified as an accessory.

For Grab Bars with an Intermediate Flange(s), Pull Snap-Flange Covers away from mounting flanges. Place grab bar in desired mounting location.

Use intermediate flange as a template to mark location of mounting screws at intermediate flange only. Mark screw locations at the center of the slot in the middle of the double-keyhole shaped mounting holes (2) in the intermediate flange. Remove grab bar from wall. Drive the intermediate flange mounting screws into wall at marked locations. Note: Make sure to leave a space of just over 1/8'' (3.17mm) between the underside of the screw head and the wall. Install grab bar on the wall by placing the round ends of the intermediate flange double-keyhole shaped mounting holes over the mounting screws (2) are located in the middle of the flange slots. Install the mounting screws into the wall at the end flanges and secure tightly.

Tighten the mounting screws at the intermediate flange. Press all snap-flange covers into place to conceal mounting flanges.

Note: Recommend use of 1/4'' or #14 sheet metal or wood screws to install Intermediate Flange. #12 screws may also be used.

Important Notes:

1. Mounting Kits — Bobrick offers a mounting kit for installing grab bars; one Bobrick mounting kit is required for each flange.

2. Grab Bar Fastener — Bobrick offers a grab bar fastening system that secures all Bobrick grab bar series; one Bobrick fastener is required for each flange. Install grab bar without backing in wall requires minimum 5/8" (16mm) thick painted or tiled drywall.

3. Optional Anchor Device — Bobrick grab bar anchor device includes stainless steel machine screws to be used for attaching grab bars to anchors. one Bobrick concealed anchor device is required for each flange.

SPECIFICATION:

Grab bar shall be Type-304 stainless steel with a satin-finish, slip-resistant surface. Grab bar shall have 18-gauge (1.2mm) wall thickness and 1-1/4" (32mm) outside diameter. Clearance between the grab bar and wall shall be 1-1/2" (38mm). Concealed mounting flanges shall be 11-gauge (3.2 mm) thick stainless steel plate, 2" x 3‑1/8" (50 x 80mm), and equipped with at least two screw holes for attachment to wall. Flange covers shall be 22-gauge (0.8mm) stainless steel, 3-1/4" (85mm) diameter, and shall snap over mounting flanges to conceal mounting screws and/or WingIt fasteners. Ends of grab bar shall pass through concealed mounting flanges and be heliarc welded to form one structural unit. Grab bar shall comply with accessible design (including ADAAG in the U.S.A.) for structural strength.

Grab Bar shall be Model __________ (insert model number) of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee;

and Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia;

and Bobrick Washroom Equipment Limited, United Kingdom.

Description

Consists of 10–32 x 5/16'' round-head, Phillips 18/8 stainless steel screws. (1) WingIt grab bar fastener.

WingIt™ Fastener No.

251-4

Mounting Kit No.

252-30

Description

Consists of (3) #14 x 2½'' Type-304 stainless steel, Phillips round-head, sheet-metal screws.

Description

Anchor for 3/4" to 1" (19-25mm) panel 1 anchor required for each flange.

Anchor for 1/2" to 1" (13mm) panel 1 anchor required for each flange.

Optional Anchor No.

24"w X 36" H, see interior elevation, verify field dimensions

Technical Data continued . . .

MIRROR WITH

STAINLESS STEEL

CHANNEL FRAME

Designer's Notes:

B-165

SERIES

Note: Mirrors greater than 36" in width will have multiple hanger brackets with a typical 8" off each edge.

Snap Locking Design (Rear View)

"2S" Tab Design (Rear View)

- for all other mirrors up to a width of 36"

Figure: 1 Figure: 2

3/4'' 19mm

2-1/2'' 65mmS

2-9/16'' 65mm

S

4'' or 5" Typ.

100 or 125mm

S

Side View Back Plate/Wall Hanger

Frame

Mirror

Finish Face of Wall

Frame

Mirror

S

S S

1" to 1-1/2" 25mm to 40mm

S

(Does not engage with lower Louvers)

Half Mirror Width

4" 100mm Typ.

Mirror Bracket w/Tape

2-7/8" 75mm

Mirror Bracket

1/2" 13mm

Finish Face of Wall

STANDARD B-165 SERIES MIRRORS

HW

MODEL

NO.

OVERALL SIZE

Technical Data

S

10-13/16" 275mm

7-1/2" 190mm

Lock & Key

Door S

S

S

3-15/16" 100mm

Finish Face of Wall

14-1/16" 355mm

R ec o m m en d ed

M o u n ti n g H ei g h t

O ff

F lo o r to

0" to

0m m

R ec o m m en d ed

M o u n ti n g H ei g h t

O ff

F lo o r

F o r A cc es si b le D es ig n

0m m10-7/16"

265mm

S S

MATERIALS:

Cabinet — 18-8, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish. Towel tray has hemmed opening to dispense paper towels without tearing.

Door — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless steel piano-hinge. Equipped with a tumbler lock keyed like other Bobrick washroom accessories.

Optional: Order Bobrick Part No. 262-130 TowelMate® available as an optional accessory. TowelMate accessory allows for paper towels to dispense one at a time without bulging, sagging or falling through the towel tray opening. TowelMate fits Gamco and most manufacturers' similar models.

OPERATION:

Unit dispenses C-fold and multifold paper towels 3-1/8" to 3-13/16" (79–97mm) deep. Slots in sides of cabinet indicate refill time. Capacity: 400 C-fold or 525 multifold paper towels. To dispense narrower towels 2-1/2" to 3-1/8" (64–79mm) deep, order optional TowelMate accessory Bobrick Part No. 262-130.

INSTALLATION:

Mount unit on wall with four #10 x 1-1/4" (4.8 x 32mm) sheet-metal screws (not furnished) at four of the eight mounting holes indicated by an S (top slots and bottom holes preferable). For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure with sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8" (3mm) toggle bolts or expansion bolts.

SPECIFICATION:

Surface-mounted paper towel dispenser shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin finish. Door shall be secured to cabinet with a full-length stainless steel piano-hinge and equipped with a tumbler lock keyed like other Bobrick washroom accessories. Paper towel tray shall have hemmed opening to dispense paper towels without tearing. Unit shall be capable of dispensing 400 C-fold or 525 multifold paper towels measuring 3-1/8" to 3-13/16" (79 to 97mm) deep. Narrower paper towels 2-1/2" to 3-1/8" (65 to 79mm) deep may be efficiently dispensed with the use of an optional TowelMate accessory, Bobrick Part No. 262-130. TowelMate accessory allows for paper towels to dispense one at a time without bulging, sagging or falling through the towel tray opening.

Surface-Mounted Paper Towel Dispenser shall be Model B-262 of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

ClassicSeries®

SURFACE-MOUnTED

PAPER TOWEL DISPENSER

B-262

Technical Data

Finish Face of Wall

S

1-11/16'' (45mm)

Typ.

R ec o m m en d ed

M o un ti ng H ei g ht O

F lo o r Fo r U ni ve rs al

A cc es si b le D es ig n

1m m

3-13/16'' (95mm)

7-1/2'' (190mm)

Hinged Lid

1-11/16'' (45mm)

Typ.

S

10'' (255mm)

ConturaSeries®

SURFACE-MOUNTED

SANITARY NAPKIN DISPOSAL

MATERIALS:

Container — 18-8, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish. Integral finger depression for opening cover. Front of container has same degree of arc as front of cover and other Bobrick ConturaSeries washroom accessories. Radius on side edges of container match corners and edges of cover and other ConturaSeries accessories.

Cover — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn, one-piece, seamless construction. Front of cover has same degree of arc as front of container and other Bobrick Contura Series washroom accessories. Radius on corners and edges of cover match side edges of container and other Contura Series accessories. Secured to container with a full-length stainless steel piano-hinge.

OPERATION:

Cover flips up for disposal of sanitary napkins and for servicing container.

INSTALLATION:

For partitions with particle-board or other solid core, secure with two #8 x 3/4'' (4.2 x 19mm) sheet-metal screws (not furnished) at all points indicated by an S, or provide through-bolts, nuts, and washers.

For hollow-core metal partitions, provide solid backing into which sheet-metal screws can be secured. If two units are installed back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition.

For masonry walls, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 3/16" (5mm) toggle bolts or expansion bolts.

For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws.

SPECIFICATION:

Surface-mounted sanitary napkin disposal shall be type-304 stainless steel with all-welded construction;

exposed surfaces shall have satin finish. Front of sanitary napkin disposal shall have same degree of arc and match other Bobrick ConturaSeries accessories in the washroom. Radius on corners and edges of sanitary napkin disposal shall complement other Bobrick ConturaSeries washroom accessories. Cover shall be drawn, one-piece, seamless construction and secured to container with a full-length stainless steel piano‑hinge.

Container shall have integral finger depression for opening cover.

Surface-Mounted Sanitary Napkin Disposal shall be Model B-270 of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

B-270

Technical Data continued . . .

S SS

S

S

Finish Face of Wall

Filler-Top

Window

Push Button & Spout

Concealed Wall Plate

4-3/4'' (120mm)

8-1/8'' (205mm)

2-3/4'' (70mm) 3-1/2''

(90mm)

6-1/2'' (165mm)

1-5/8'' (40mm)

Finished Face of Floor

R ec o m m en d ed

M o un ti ng H ei g ht O

F lo o r Fo r A

D A

/I C

C (R ea ch

D ep th

M ax im um

O ve r C o un te rt o p)

-1

/2

(1

5m m

R ec o m m en d ed

M o un ti ng H ei g ht O

F lo o r Fo r C al if o rn ia B ui ld in g

C o d e

(C B

C

-1 /2

(1 m m

CBC

46-1/2'' (1180mm)

R ec o m m en d ed

M o un ti ng H ei g ht O

F lo o r Fo r A

D A

/I C

C (R ea ch

D ep th

-2

5" M ax im um O ve r

C o un te rt o p)

-1

/2

(1 m m

ADA/ICC

(Reach depth 20-25" max.

over countertop) 50-1/2'' (1280mm)

ADA/ICC

(Reach depth 20" max.

over countertop) 54-1/2'' (1385mm)

MATERIALS:

Container — 18-8, Type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Body is drawn, one-piece, seamless construction. Back plate has mounting bracket attached. Furnished with concealed wall plate.

Equipped with a clear acrylic refill-indicator window and a locked, hinged stainless steel lid for top filling.

Capacity: 40-fl oz (1.2-L).

Valve — Black molded plastic push button and spout. Soap head-holding mushroom valve. Stainless steel spring.

U-packing seal and duckbill. Antibacterial-soap-resistant plastic cylinder.

ClassicSeries®

SURFACE-MOUNTED

SOAP DISPENSER

B-2111

Installation Guidance *Operable Part: Top of pushbutton

Maximum mounting height of operable part:

ADA/ICC (Reach Depth 20” Maximum Over Countertop): 48" above finished floor (AFF) ADA/ICC (Reach Depth, 20”-25” Maximum Over Countertop): 44" above finished floor (AFF) CBC: 40" above finished floor (AFF)

*For more information regarding operable parts, please refer to Bobrick Planning Guide for Accessible Restrooms, page 9.

Operable Part

WILSONART SOLID

SURFACE FOR

COUNTERTOP,

BACKSPLASH AND FRONT

SKIRT TRIM.

Division 12: Furnishings

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 11/2/17 Printed in U.S.A.

The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2017 by Bobrick Washroom Equipment, Inc.

Technical Data

DOUBLE-ROLL

STAINLESS STEEL

TOILET TISSUE DISPENSER

B-7686 B-76867

Setscrew Concealed Wall Plate

Finish Face of Wall

S

S

12-1/2'' 320mm

2'' 50mm Typ.

5-1/4'' 135mm

Support Arm

Flange and Mounting Bracket 1/2''

13mm

3-3/16'' 80mm

5-1/4'' 135mm

3-15/16'' 100mm

2'' 50mm Typ.

R ec o m m en d ed

M o u n ti n g H ei g h t o ff

F lo o r fo r

U n iv er sa l /

A cc es si b e

D es ig n m m

MATERIAL:

Flanges & Support Arms (3) -— 18-8, Type-304, 22-gauge (0.8mm) stainless steel. Each fl ange has a concealed, 18-gauge (1.2mm) stainless steel mounting bracket. All-welded construction. Secured to wall plate with a stainless steel setscrew.

Concealed Wall Plates (3) — 18-8, Type-304, 19-gauge (1.0mm) stainless steel.

Spindles (2) — Chrome-plated plastic. Equipped with heavy-duty internal spring.

INSTALLATION:

To remove concealed wall plates from back of fl anges and mounting brackets, loosen setscrews. Mount each wall plate with prongs at top; secure with sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting brackets onto prongs of wall plate, then secure into position by tightening setscrews at bottom of fl anges.

Note: Centerline-to-centerline of concealed wall plates must be within 1/16'' (1.6mm) of dimension shown.

For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure the unit with sheet-metal screws furnished. For other wall surfaces, provide fi ber plugs or expansion shields for use with sheet-metal screws furnished by manufacturer, or provide 1/8'' (3mm) toggle bolts or expansion bolts.

For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured.

SPECIFICATION:

Double-roll toilet tissue dispenser shall be Type-304 stainless steel with __________ (insert one: bright polished or satin) fi nish.

Unit shall accommodate two standard-core toilet paper rolls up to 5-1/2'' (140mm) diameter (1800 sheets). Flanges and support arms shall be 22 gauge (0.8mm) and equipped with concealed, 18-gauge (1.2mm) mounting brackets that are secured to concealed, 19-gauge (1.0mm) wall plates with stainless steel setscrews. cSpindles shall be equipped with heavy-duty internal springs.

cDesigner's Note: Theft-resistant toilet tissue spindles, which require special key for removal, are available as an optional accessory.

Part number for spindle is 283-604.

Double-Roll Toilet Tissue Dispenser shall be Model __________ (insert model number) of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

Specify Model Required: Model B-7686 Bright polished stainless steel Model B-76867 Satin-fi nish stainless steel

J31 © 2020 AS America Inc.

BARRIER FREE

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES

AND ANSI A117.1 ACCESSIBLE AND USABLE

BUILDINGS AND FACILITIES - CHECK LOCAL CODES.

Install lavatory 864mm (34") from finished floor.

Lavatory installed 51mm (2") minimum from front edge of countertop provides 686mm (27") knee clearance area.

NOTES:

* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE

SUGGESTED.

FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE

TEMPLATE SUPPLIED WITH SINK.

FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

SEALING COMPOUND SUPPLIED BY OTHERS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

FINISHED

WALL

OR

SPLASH BACK

486mm (19-1/8")

184mm (7-1/4")

83mm (3-1/4")

203mm (8")

OPTIONAL

FINISHED

FLOOR

318mm (12-1/2")

1-1/4" O.D.

TAILPIECE

1-1/4" O.D.

WASTE

203mm (8")

178mm (7")

273mm (10-3/4")

COUNTERTOP (BY OTHERS)

193mm (7-5/8")

14mm (9/16")

SEALING

COMPOUND

SUPPLIES

AS REQ'D.

C/L

787mm (31") 851mm (33-1/2")

851mm (33-1/2")

102mm (4")

610mm (24")

152mm (6")

MAX.

BARRIER FREE

CLEARANCE

686mm (27")

MIN.

203mm (8")

MIN.

229mm (9")

MIN.

DRAWING FOR

DIMENSIONAL

PURPOSES ONLY.

IT IS NOT AN EXACT

REPRESENTATION.

Rondalyn®

Countertop Sink

VITREOUS CHINA

RONDALYN® COUNTERTOP SINK

❏ 0490.011 Faucet holes on 8" (203mm) centers (illustrated) ❏ 0491.019 Faucet holes on 4" (102mm) centers ❏ 0490.156 Center hole only

Nominal Dimensions:

486mm (19-1/8") Round

Bowl sizes:

381mm (15") wide 308mm (12-1/8") front to back 146mm (5-3/4") deep

Compliance Certifications - Meets or Exceeds the Following Specifications:

• ASME A112.19.2M for Vitreous China Fixtures spec_0490-0491 Rondalyn CountertopSink Rev. 3 1/20

SEE REVERSE FOR ADDITIONAL ROUGHING-IN

DIMENSIONS

To Be Specified:

❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Faucet*:

* See faucet section for additional models available

Division 22: Plumbing

J32

BARRIER FREE

© 2020 AS America Inc.

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES

AND ANSI A117.1 ACCESSIBLE AND USABLE

BUILDINGS AND FACILITIES - CHECK LOCAL CODES.

Install lavatory 864mm (34") from finished floor.

Lavatory installed 51mm (2") minimum from front edge of countertop provides 686mm (27") knee clearance area.

FINISHED

WALL

OR

SPLASH BACK

486mm (19-1/8")

184mm (7-1/4")

83mm (3-1/4")

102mm (4")

OPTIONAL

FINISHED

FLOOR

318mm (12-1/2")

1-1/4" O.D.

TAILPIECE

1-1/4" O.D.

WASTE

203mm (8")

178mm (7")

273mm (10-3/4")

COUNTERTOP (BY OTHERS)

SEALING

COMPOUND

SUPPLIES

AS REQ'D.

C/L

787mm (31") 851mm (33-1/2")

851mm (33-1/2")

102mm (4")

610mm (24")

152mm (6")

MAX.

BARRIER FREE

CLEARANCE

686mm (27")

MIN.

203mm (8")

MIN.

229mm (9")

MIN.

102mm (4")

114mm

(4-1/2") DRAWING FOR

DIMENSIONAL

PURPOSES ONLY.

IT IS NOT AN EXACT

REPRESENTATION.

193mm (7-5/8")

14mm (9/16")

Rondalyn®

Countertop Sink

VITREOUS CHINA

NOTES:

* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP

ARE SUGGESTED.

FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE

TEMPLATE SUPPLIED WITH SINK.

FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

SEALING COMPOUND SUPPLIED BY OTHERS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

0491.027 4" Ctrs Extra Right Hand Hole

0491.035 4" Ctrs Extra Left Hand Hole

FINISHED

WALL OR

SPLASH BACK

486mm (19-1/8")

184mm (7-1/4")

83mm (3-1/4")

102mm

(4") OPTIONAL

FINISHED

FLOOR

318mm (12-1/2")

1-1/4" O.D.

TAILPIECE

1-1/4" O.D.

WASTE

203mm (8")

178mm (7")

273mm (10-3/4")

COUNTERTOP (BY OTHERS)

SEALING

COMPOUND

SUPPLIES

AS REQ'D.

C/L

787mm (31") 851mm (33-1/2")

851mm (33-1/2")

102mm (4")

610mm (24")

152mm (6")

MAX.

BARRIER FREE

CLEARANCE

686mm (27")

MIN.

203mm (8")

MIN.

229mm (9")

MIN.

102mm (4")

114mm (4-1/2")

DRAWING FOR

DIMENSIONAL

PURPOSES ONLY.

IT IS NOT AN EXACT

REPRESENTATION.

193mm (7-5/8")

14mm (9/16") spec_0490-0491 Rondalyn CountertopSink Rev. 3 1/20

OR-1

© 2023 AS America Inc.

Colony® Chair Height Elongated 12" Rough Toilet

❏ 751AA101

• Meets EPA WaterSense® criteria

• MaP Score 600g HET

• Includes color matched bolt caps

• 2" flush valve

• 2" trapway

• 16-1/2" rim height for ADA accessible applications

• 12" (305mm) rough-in

• Generous 9" x 8" water surface area helps prevent dirt from sticking to the bowl

• Color matched handle is supplied

• Color matched seat included

• 2 year warranty

Nominal Dimensions:

756 x 488 x 784mm (29-3/4" x 19-3/16" x 30-7/8")

Supply line sold separately

Compliance Certifications - Meets or Exceeds the Following Specifications:

• �ASME A112.19.2/CSA B45.1-08 for Vitreous China Fixtures

• US EPA WaterSense® Specification for HETs

Colony® Chair Height Elongated 12" Rough Toilet

VITREOUS CHINA

spec_751AA101 Colony RHel-12R Rev. B 2/23

BARRIER FREE

FINISHED WALL

m m

(7 /8

419mm (16-1/2")

FINISHED

FLOOR

305mm (12")

756mm (29-3/4")

C/L OF OUTLET

m m

(3 -7

/8

207mm (8-1/8)

470mm (18-1/2")

C/L OF SEAT POST HOLES

140mm (5-1/2" CENTERS)

340mm (13-3/8")

182mm (7-3/16")

784mm (30-7/8")

488mm (19-3/16")

SUPPLY

AS

REQ'D

248mm (9-3/4")

152mm (6")

356mm (14")

254mm (10")*

To Be Specified:

❏ Color: ❏ White ❏ Bone ❏ Supply with stop:

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES

AND ICC ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND

USABLE BUILDING FACILITIES-CHECK LOCAL CODES.

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF

305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

Certified by

IAPMO R&T

handle on left side

751AA101.020, complete toilet, elongated bowl, 1.28 gpf flush, 12 in rough-in, 15 in Ht Rim, White

M143 © 2016 AS America Inc.

spec_6550.011 AllbrookFW Rev. A 9/16

ALLBROOK® FloWise®

UNIVERSAL URINAL

VITREOUS CHINA

ALLBROOK® FloWise®

UNIVERSAL URINAL

❏ 6550.001 Top spud

Nominal Dimensions:

363 x 363 x 546mm (14-5/16" x 14-5/16" x 21-1/2")

Recommended working pressure – between 20 psi at valve when flushing and 80 psi static

Compliance Certifications - Meets or Exceeds the Following Specifications:

NOTES:

FLUSH VALVE NOT INCLUDED WITH FIXTURE AND MUST BE

ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES

AND ANSI A117.1 ACCESSIBLE AND USEABLE BUILDINGS AND

FACILITIES - CHECK LOCAL CODES.

When installed so top of rim is 432mm (17") from finished floor.

To Be Specified:

❏ Color: ❏ White ❏ Flush Valve:

(Top Spud)

BARRIER FREE

292mm (11-1/2")

292mm (11-1/2")

191mm (7-1/2")

368mm (14-1/2")

363mm (14-5/16")

547mm (21-1/2")

C/L

HANGER

3/4"

SPUD

121mm (4-3/4")

3/4" S.P.S.

OR C.W.T.

SUPPLY TO

FLUSH VALVE

102mm (4")

C/L OF

OUTLET

356mm (14")

57mm (2-1/4")

13mm (1/2")

2" N.P.T.

FEMALE

OUTLET

CONNECTION

FINISHED

WALL

16mm (5/8")

10mm (3/8")

102mm (4")

GASKET

2" N.P.T.

INSIDE THREADS

DETAIL OF OUTLET CONNECTION

FINISHED WALL

432mm (17")

610mm (24")

OPTIONAL

TO FINISHED

FLOOR

When used with

0.5 gpf urinal flush valves

Urinal shown with American Standard #603051.002 Urinal Flush Valve, 0.5 gpf flush, 20 psi pressure, polished chrome

© 2017 AS America, Inc.

CHANCELLOR™

DUAL CONTROL CENTERSET BATH FAUCET

MODEL NUMBER:

❏ �7022201.002 Centerset Lavatory Faucet

Speed Connect® pre-assembled drain.

Metal lever handles. Polished Chrome finish.

SKU# 673-3560.

❏ �7022201.075 Centerset Lavatory Faucet Speed Connect pre-assembled drain.

Metal lever handles. Brushed Nickel finish.

SKU# 673-3561.

GENERAL DESCRIPTION:

Centerset lavatory faucet on 4" centers. 1/4 turn washerless ceramic disc valve cartridges. Durable non-metal waterways with one-half inch male inlet shanks. Metal body. Metal lever handles. 20" (500 mm) long flexible stainless steel drain cable is pre-assembled to faucet body. Speed Connect® pre-assembled drain body with 1-1/4 inch (32 mm) tail piece. 1.2 gpm/4.5 L/min.

maximum flow rate.

PRODUCT FEATURES:

Speed Connect® Drain:

• 1/3 the parts, installs in 1/3 the time.

• No tools or plumbers putty required for installation.

• No adjustments required - seals the first time, every time.

• Flexible stainless steel cable - installs effortlessly in tight spaces.

Simple Installation: Fast and easy one person installation.

Faucet drops in from top.

Ceramic Disc Valve Cartridge: Assures a lifetime of drip-free performance.

Lead Free: Faucet contains ≤ 0.25% total lead content by weighted average.

SUGGESTED SPECIFICATION

Dual control 4" centerset lavatory faucet shall feature a non-metal waterway. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Shall also feature a drain body with stainless steel cable actuation. Fitting shall be American Standard Model# 7022201.002, SKU# 673-3560. Model# 7022201.075, SKU# 673-3561.

3-11/16" (94 mm)

5-3/8" (149 mm)

2" (51 mm)

6-1/4" (159 mm)

1-1/8" MAX.

(32 mm)

1-1/4" OD

(32 mm OD)

4 " (101 mm)

9-1/8 " (232 mm)

5-1/8 " (130 mm)

6/17

LIMITED

LIFETIM

E

WARRANTY

Guaranteed Not To Leak

Reliable For Life

CERAMIC DISC VALVE

Beautiful & Tough

Reliable For LifeLIMITED

LIFETIM

E

WARRANTY

TARNISH, SCRATCH AND

CORROSION RESISTANT FINISH

Reliable For LifeLIMITED

LIFETIM

E

WARRANTY

Easier Installation

SPEED CONNECT® DRAIN

X easier washing with higher faucet

© 2017 AS America, Inc.

CHANCELLOR™

DUAL CONTROL CENTERSET BATH FAUCET

FLOW RATE*

G A

L

LO

N S

P E

R M

IN

U

T E

I N L E T P R E S S U R E ( P S I ) *Flow rates shown are for mixed hot and cold.

0.0

0.2

0.4

0.6

0.8

1.0

1.2 1.4

806040200

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ANSI A117.1

ASME A112.18.1

CSA B125

NSF 61/Section 9

NSF 372

Product Number Description

7022201.002 Centerset lavatory. Lever handles. Speed Connect® pre-assembled drain. Polished Chrome finish. �

SKU# 673-3560.

7022201.075 Centerset lavatory. Lever handles. Speed Connect® pre-assembled drain. Brushed Nickel finish. �

SKU# 673-3561.

Meets the American Disabilities Act Guidelines ANSI A117.1 Requirements for the physically challenged.

6/17

800-537-2107 800-977-2747

WWW.SPEAKMAN.COM

Architect/Engineer Approval Space: P:

F:

W:

R:

Management Systems Registered to ISO 9001

Neo® Trim and Handicap Shower System (Valve not included)

SLV-1080-ADA

• CPV-PB: � Pressure Balance Valve Sweat & Thread Connections

• CPV-PB-PXC: � Pressure Balance Valve PEX F1807 Crimp Inlet Connections

• CPV-PB-PXE: � Pressure Balance Valve PEX F1960 Cold-Expansion Inlet Connections

• CPV-T2: � Thermostatic Valve Sweat & Thread Connections

• CPV-T2-PXC: � Thermostatic Valve PEX F1807 Crimp Inlet Connections

• CPV-T2-PXE: � Thermostatic Valve PEX F1960 Cold-Expansion Inlet Connections

VALVE OPTIONS:

• See Speakman.com For Warranty Information Visit www.speakman.com for full product warranty information

WARRANTY:

04-FEBRUARY 2022

Information continues on next page

PC

STOCK FINISHES:

BN

• ASME A112.18.1/CSA B125.1 certified

• ADA compliant

STANDARDS:

• SLV-1080-ADA: � Includes VS-3010 2.5 GPM (9.5 L/min) Flow Rate Hand Held Shower

• SLV-1080-ADA-E175: �Includes VS-3010-E175 1.75 GPM (6.6 L/min) Flow Rate Hand Held Shower

MODELS:

FEATURES:

• CPT-1001: Shower Valve Trim

• S-2540: Shower Arm and Flange

• �VS-3010 or

VS-3010-E175:

�Hand Shower w/ 60 in. Hose

• VS-156: Pause/Trickle Adaptor

• VS-153-ADA: 24 in. ADA Slide Bar

Division 22: Plumbing this is not available at McCoy's

800-537-2107 800-977-2747

WWW.SPEAKMAN.COM

Architect/Engineer Approval Space: P:

F:

W:

R:

Management Systems Registered to ISO 9001

Neo® Trim and Handicap Shower System (Valve not included)

SLV-1080-ADA

04-FEBRUARY 2022

A

B D

6'6" [2m]

TO FLOOR

4'6" [1.4m]

TO FLOOR

SEE NOTE #4

1/2" NPT

MALE

1" [25mm] DIA.

ROUGH-IN HOLE

WALL PLATE

7" [178mm] DIA.

METAL

LEVER HANDLE

FINISHED WALL

HAND SHOWER

SHOWER ARM BRACKET

ADA PAUSE SWITCH

HOSE ASSEMBLY

WITH BUILT-IN

CHECK VALVE

C

5-1/2" [140mm] DIA.

ROUGH-IN HOLE FOR

VALVE ACCESS

TUB OUTLET,

CAPPED

COLD WATER INLET

HOT WATER INLET

INTEGRAL SPRING

CHECK STOPS

SHOWER OUTLET,

TO SHOWER ARM

7" 178mm

E

92-SLV-1080-ADA-RH-01

NOTES:

ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] UNLESS OTHERWISE SPECIFIED AND ARE 1.

SUBJECT TO CHANGE WITHOUT NOTICE.

THE LOCATION OF THE SLIDE BAR IS OPTIONAL, BUT RESTRICTED BY THE 60" HOSE LENGTH 2.

RUNNING FROM THE SHOWER ARM BRACKET TO THE HAND SHOWER.

FOR ADA MOUNTING LOCATIONS CONSULT ADAAG, ANSI A117.1, OR STATE 3.

REGULATIONS.

SHOWER VALVE NOT INCLUDED

TO THE

CENTERLINE

OF INLET(S)

TO THE

BRACE(S)

PEX ROUGH-IN

SLIDE BAR

LOCATION

OPTIONAL

(SEE NOTE #3)

CPV-T2 CPV-T2-PXC CPV-T2-PXE

MODIFY

HEIGHT

DIMENSIONS

TO COMPLY

WITH ADA

MODIFY HEIGHT

DIMENSIONS TO

COMPLY WITH ADA.

SEE DIMENSIONS ON

INTERIOR ELEVATIONS

© 2021 AS America, Inc.

Spectra™

Filter Shower Rail

8/21

MODEL NUMBER:

❏ ��9238759 Filter Shower Rail 1.8 gpm Inc�ludes:

• Spectra™ 4 Function Hand Shower

• Slide Bar with Easy Glide Holder

• 60" Hose

• KDF Filter

SUGGESTED SPECIFICATION

Shower system shall feature a 69" hose and hand shower. System shall have a quick-change KDF filter that reudces up to 50% of chlorine in the water. Hand Shower shall be WaterSense certified. Shower system shall have a pressure compensating control device. Kit shall include two check valves to prevent backflow. Fitting shall be American Standard Model # 9238759.___.

3-5/16" (84 mm)

3-7/16" (86.7 mm)

Ø 7/8" (22 mm)

5-7/16" (138 mm)

1-1/2" (38.7 mm)

FINISHED

WALL

60" (1524 mm)

5-1/4" (133 mm)

24" (609 mm)

MIN. 1" – MAX. 2-5/16"

(25 – 58 mm)

GENERAL DESCRIPTION:

Complete shower system kit includes:

24" (610 mm) shower system; 60" (1524 mm) shower hose;

a Spectra handheld water saving hand shower. 5" (127 mm) Quick-change KDF filter reduces chlorine in the water up to 50%. Hand shower adjusts from Drench to Sensitive to Powerwash® to Massage. Slide bar features an adjustable shower holder which can be set at any height or position along the bar and angle up to 45 .̊ Kit includes two check valves to prevent backflow. 1.8gpm/6.8L/min. maximum flow rate.

PRODUCT FEATURES:

Water Saving: Saves 28% water usage. WaterSense® certified.

Variety of Spray Functions: Allows the user to select the spray functions best suited to their needs.

Quick-Change KDF Filter: Reduces up to 50% of chlorine for a healthier shower.

Simple Height Adjustment: Allows positioning of the personal shower anywhere along the bar.

Shower Hose: 60" hose is made of durable metal.

Plumb Pak (similar at McCoy's) K760CP Slide Bar Handheld Shower Kit, 1.8 gpm, 3 spray function, 60 in L hose brushed nickel finish

© 2021 AS America, Inc.

Spectra™

Filter Shower Rail

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ASME A112.18.1

CSA B125.1

8/21

Product Number Description

Finish

Polished Chrome

Brushed Nickel

002 295

9238759 Spectra Versa™ 24" Shower System Kit. Contains Spectra™ hand shower, KDF filter, and 60" hose.

20 40 60 80 100 120

0.2

0.4

0.6

0.8

1.2

1.4

1.6

1.8

Pressure (psi)

F lo w R at e

(g p m

Flow Rate

20 40 60 80 100 120

0.5

1.5

2.5

Pressure (psi)

F lo w R at e

(g p m

Flow Rate

CHLORINE

WATER

FILTER

FILTER

COVER

FILTER

HOUSING

(Reduces Chlorine)

Accessories

FS50 Replacement Filter

Quickdrain Co. | 2597 W 64th Ave, Denver, CO 80221 | 800.203.1155 | Oatey.com/Quickdrain

Quickdrain Co. is part of the Oatey family of companies

PLD26-N, PLD27.5-N

PLD30-N, PLD33-N PLD36-N,

PLD40-N, PLD44-N, PLD46-N

PLD48-N, PLD52-N, PLD57-N,

PLD63-N, PLD68-N

TECHNICAL SPECIFICATION

MODEL A B C D

PLD26-N 26 13 13 28

PLD27.5-N 27.5 13.75 13.75 29.5

PLD30-N 30 12 18 32

PLD33-N 33 16.5 16.5 35

PLD36-N 36 15 21 38

PLD40-N 40 17 23 42

PLD44-N 44 19 25 46

PLD46-N 46 23 23 48

PLD48-N 48 21 27 50

PLD52-N 52 23 29 54

PLD57-N 57 25.5 31.5 59

PLD63-N 63 31.5 31.5 65

PLD68-N 68 34 34 70

A

D

B C

(A+2)

PROLINE DRAIN BODY DIMENSIONS

INSTALLATION NOTES

• Install product according to the Typical ProLine Drain Installation details

• Drain body cannot be modified

• Drain cover can be cut on site to finished length

• When used at the entry to a curbless shower as a primary shower drain, the capacity of the drain is 5 GPM and COSMO, LINES, or

STREAM are the only recommended cover patterns.

1 Stud Wall

2 Backer Board

3 Thin-set (for wall tile)

4 First layer of Liquid Waterproofing

5 Reinforcing Fabric

6 Second layer of Liquid Waterproofing

7 Quick Slope

8 Thin-set

9 Sub-floor

10 Floor Joists (wood floor)

11 Drain Body

12 Trough Extension

13 Wall Tile and Grout

14 Drain Cover

15 Height Adjustable Spacer

16 Capillary Break

17 Transition Tape

18 De-coupling Crack-isolation Matt

19 Thin-set

20 Blocking (wood floor)

Quickdrain Co. | 2597 W 64th Ave, Denver, CO 80221 | 800.203.1155 | Oatey.com/Quickdrain

Quickdrain Co. is part of the Oatey family of companies

Job Name Item #

Location

Engineer Contractor

PO # Tag

Representative

PLD26-N, PLD27.5-N

PLD30-N, PLD33-N PLD36-N,

PLD40-N, PLD44-N, PLD46-N

PLD48-N, PLD52-N, PLD57-N,

PLD63-N, PLD68-N

TECHNICAL SPECIFICATION

DESCRIPTION

• 18 Gauge 316L Stainless Steel

• Key feature of the drain body is a fully sloped trough that prevents standing water and solids being deposited in the trough

• 2" I.D. schedule 10 stainless steel down spout waste outlet

• Length adjustability of drain trough with use of trough extensions to accommodate finished openings from 26.25" - 72". QuickDrain USA recommends the drain cover extend the entire length of the shower pan (wall to wall or wall to curb)

• Height adjustability of drain cover with use of spacers for different thicknesses of finish material from 3/8" to 3/4". Custom spacers are available for finish material thicknesses from 1"- 2 1/2"

• Custom drain lengths available from 10"-100”. Side outlets, Commercial outlets, Multiple outlets and Resinous drains.

• For more information on our custom drains please visit our website:

www.quickdrainusa.com

• Available with tamper proof cover and screws.

OPTIONAL ACCESSORIES

Drain Accessories:

• Leveling or Placement Brackets (2)

Shower Pan Accessories:

• Quick Slopes, Flat Panels, Curb Forms

Liquid Waterproofing Accessories:

• Curb Covers

DRAIN BODY INCLUDES

• Height adjustable spacers*

• Trough Extensions (2)

• No-hub coupling (1)

• Cover removal key (2)

• Transition Tape (1)

• Inside Corners (4)

• Outside Corners (2)

• Reinforcement Tape (1)

*See chart for part quantities of different drain lengths

APPROVALS AND LISTINGS

Before installing QuickDrain USA system, check with your local building department/plumbing inspector to ensure compliance with the local building codes. QuickDrain USA LLC is not responsible for any conflicts with local building codes. QuickDrain USA LLC is not responsible for improper installation of any part of the assembly or the waterprooofing membrane. Dimensions are subject to manufacturer’s tolerance and can change without notice.

6/19

MODEL NUMBER

HEIGHT

ADJUSTABLE SPACERS

COVER

LENGTH

PLD26-N, PLD27.5-N 4 COVER32

PLD30-N, PLD33-N,

PLD36-N

4 COVER40

PLD40-N, PLD44-N,

PLD46-N

6 COVER48

PLD48-N, PLD52-N 6 COVER56

PLD57-N 8 COVER64

PLD63-N, PLD68-N 8 COVER72

Cosmo Horizontal* Vertical*

TileIn* Lines Stream

Cover Removal Key

Height Adjustable

Spacers

Drain Cover (sold separately)

Trough

Extension

Transition

Tape

Reinforcement

Tape

No-Hub Coupling

2” I.D. Waste Outlet

Drain Body

Cap Screw Tabs

Inside

Corners

Outside

Corners

PROLINE DRAIN ASSEMBLY

*Not recommended for curbless entry showers

REQUIRED PART (NOT INCLUDED) - DRAIN COVER

• Available in the designs below and in these lengths – 32" , 40", 48", 56", 64", and 72"

Division 23: Mechanical

Division 23: Electrical

Division 23: Electrical