ESBD_423864_1748615055176_TMD25-FMO-0039067 Waco 2 Door and Door Hardware V5 Final.pdf

TEXAS MILITARY DEPARTMENT

SOLICITATION

NIGP Codes 909-37: Doors and Windows 910-14: Door Installation, Metal, Maintenance and Repair Services 318-40: Locks and Keys

SOLICITATION NO.

TMD25-FMO-0039067

TYPE OF SOLICITATION

INVITATION FOR BID (IFB)

DATE ISSUED

05/30/2025

INVITATION FOR BIDS (IFB) – Waco 2 Door and Door Hardware Replacements Bidder must submit email responses no later than 2:00 P.M. local time on 06/24/2025 to the following address.

Texas Military Department (TMD) Procurement and Contract Services (P&CS) Email: Procurement@military.texas.gov

FOR INFORMATION CONTACT:

Kristine Brock,CTCD, CTCM

Contract Administrator

PHONE: (512) 782-3040

EMAIL: Procurement@military.texas.gov

RESPONSE (Bidder must fully complete) DISCOUNT FOR PROMPT PAYMENT:è 10 DAYS

20 DAYS

30 DAYS

___ DAYS

ACKNOWLEDGMENT OF ADDENDA:

Bidder acknowledges receipt of solicitation addenda and related documents numbered and dated:

ADDENDUM NO. DATE ADDENDUM NO. DATE

NAME AND ADDRESS

OF Bidder:è

RESPONSE DATE

TELEPHONE NO. (Include area code)

SIGNATURE OF AUTHORIZED REPRESENTATIVE

NAME AND TITLE OF AUTHORIZED REPRESENTATIVE

CERTIFICATION, DISQUALIFICATION, and REMEDIES By signing this document, Bidder represents and warrants that all statements, certifications, and information submitted in response to this solicitation are true, current, complete, and accurate.

Failure to sign will disqualify response. TMD may pursue and enforce any available remedies against the Bidder for making false statements, including disqualifying the Bidder’s response, immediately cancelling any Contract awarded to Vendor, or recommending State of Texas debarment.

TERM, PRICING, and FUNDING The initial contract term is effective on the effective date stated in purchase order and expires one (1) year from that effective date.

TMD will not allow changes after Date of Award to terms or pricing during either the term of the Contract. The continuation of the Contract for any period is subject to the availability of TMD’s funding source for the Contract.

mailto:Procurement@military.texas.gov

ANTICIPATED SCHEDULE OF EVENTS

TMD currently anticipates that the selection of successful Bidder and award of the Contract, if any, will proceed according to the following schedule:

5/30/2025 Solicitation Posted to ESBD

6/10/2025

Time for each visit is 9:00 a.m.

And 1:00 p.m.

Contractors will be required to attend a minimum of (1) Site Visit to be eligible for award. A valid state ID is required to enter the facility. The site visit is located in Waco 2 RC building located at 2000 N. New Road, Waco, TX 76707.

6/17/2025 2:00p.m. Last day to submit written questions for clarification to TMD

6/19/2025 Estimated date for TMD to post Question and Answer (Q&A) document to ESBD

6/24/2025 2:00 p.m. Deadline for TMD to receive Bids 6/27/2025 Anticipated date of Contract Award

TMD reserves the right, in its sole discretion, to change the above date(s). Notices of changes to items directly impacting the original solicitation process will be posted on the Electronic State Business Daily (ESBD) located at: https://www.txsmartbuy.gov/esbd . Bidder should check the ESBD frequently for updates. Bidder is solely responsible for verifying receipt of its questions, if applicable, and responding by the deadlines stated. A Bidder’s failure to periodically check the ESBD for updates will in no way release the awarded Bidder from compliance with any requirements in posted “addenda or additional information” although such compliance may result in additional costs to meet the requirements.

Questions regarding this solicitation must be in writing and must be submitted to TMD’s Contract Administrator by the date and time noted in the table listed in this solicitation. Telephone inquiries will not be accepted. Questions may be submitted by either facsimile or email. TMD intends to post answers to these questions on the ESBD on or before the date and time noted in the table listed in this solicitation. Bidder is solely responsible for verifying TMD’s timely receipt of its questions by the stated deadlines.

https://www.txsmartbuy.gov/esbd

Page 3 of 27 Approved 10/16/2021

ANTICIPATED SCHEDULE OF EVENTS

SECTION A—DEFINITIONS

SECTION B—SERVICES AND PRICES

B.1 PRICING REQUIREMENTS

B.1.1 Pricing Instructions B.1.2 Financial Rating Report, Financial Resources, and Ability to Perform

B.2 INVOICE REQUIREMENTS

B.3 PAYMENTS

B.3.1 Billing and Payment B.3.2 Payment Adjustment B.3.3 Late Payment B.3.4 Deductions for Unacceptable Compliance B.3.5 Withholding of Payment B.3.6 Debts and Delinquencies B.3.7 Right to Offset

B.4 Mandatory PRICING SCHEDULE Contract Term Pricing

SECTION C - SPECIFICATIONS

C.1 INTRODUCTION

C.2 SPECIFICATIONS and Statement of Work

C.3 DELIVERABLES

C.4 ACCEPTANCE CRITERIA

C.5 TMD PERSONNEL

C.5.1. TMD’s Contract Administrator C.5.2 TMD’s Contract Monitor

C.6 INSURANCE REQUIRED UNDER THE CONTRACT

C.7 WARRANTY CALL RESPONSE TIME

C.8 PRODUCT WARRANTY

C.9 RETAINAGE

C.10 REFERENCES

SECTION D—CONTRACT COMPLIANCE REPORTS AND DATA

SECTION E—INSTRUCTIONS, CONDITIONS, AND NOTICES TO BIDDERS

E.1 RESPONSE PREPARATION INSTRUCTIONS

E.2 AMENDMENTS TO THE SOLICITATION

E.3 LATE SUBMISSIONS, MODIFICATIONS AND WITHDRAWALS OF RESPONSES

Page 4 of 27 Approved 10/16/2021

E.4 SIGNATURES ON RESPONSE SUBMITTED

E.5 RESPONSE ACCEPTANCE PERIOD

E.6 CONTRACT AWARD

E.7 TMD’s RIGHTS

E.8 RESPONSE SUBMISSION INSTRUCTIONS

E.8.1 Volume One – Contract Forms and Required Response Information E.8.2 Volume Two – Information Section E.8.3 Volume Three – Cost and Pricing Response

E.9 DISCUSSION AND CORRESPONDENCE

E.10 SUBMISSIONS SUBJECT TO THE Texas public information act

E.11 AGENCY POSTING OF CONTRACTS

E.12 SITE VISTS

SECTION F—EVALUATION CRITERIA

SECTION G—LIST OF EXHIBITS

BY NUMBER AND TITLE

Page 5 of 27 Approved 10/16/2021

SECTION A—DEFINITIONS

The following terms and acronyms used in this solicitation have the meanings given in this section unless the context indicates otherwise.

“Bid” means the Bidder’s response to this solicitation. A Bid is an offer to contract based upon the terms, conditions, and specifications contained within the solicitation. Bids do not become contracts until they are accepted through an open market purchase order.

“Bidder” means the individual, business entity, or organization that submits a response in reply to this solicitation with intent to contract with TMD.

“Business Days” means Monday through Friday except for federal, state, and legal holidays observed by the State of Texas.

“Business Hours” means 8:00 a.m. to 5:00 p.m. Central Time.

“Contract” means this formal, written, and legally enforceable agreement between TMD and Contractor.

“Contractor” means the individual, business or other entity awarded the Contract. In the context of submitting a response, “Contractor” also means “Bidder” and “Vendor.”

“Date of Award” means the date the Contract is fully executed.

“Days” means calendar days unless otherwise specified.

“TMD” means the Texas Military Department of the State of Texas, a state agency in the executive branch created under Texas Government Code Ch. 437.

“Fiscal Year” means any of the one (1) year periods beginning September 1 and ending August 31 used for annual budgetary purposes by the State of Texas.

“Parties” means Contractor and TMD.

“Vendor” means the individual, business entity, or organization at any stage in the procurement or contracting process (prior to response, during response, and after contract award).

Page 6 of 27 Approved 10/16/2021

SECTION B—SERVICES AND PRICES

B.1 PRICING REQUIREMENTS

B.1.1 Pricing Instructions

A. TMD seeks and Contractor will provide the commodities or services described in Section C, Specifications on a no minimum, as needed, as requested basis. Pricing is firm fixed price for the door and door hardware replacements requested and authorized by TMD as provided under the Contract. Bidder must price the response on this basis.

B. Contractor must deliver and provide the door and door hardware replacements in compliance with all requirements of the Contract with such payment to be processed by TMD after TMD’s receipt, testing and acceptance of the door and door hardware replacements

C. Bidder must submit a response that include all costs, fees, licenses, and expenses for Contractor’s delivery of the door and door hardware replacements and performance under the Contract and will represent Contractor’s sole compensation under the Contract. No minimum compensation is guaranteed under the Contract. No payments may be approved or made prior to TMD’s acceptance as provided in the Contract.

D. TMD reserves the right to make an award on the basis of low line item bid, low total of line items, or in any other combination that will serve the best interest of TMD and to reject any and all items bid at the sole discretion of TMD. TMD also reserves the right to accept or reject all or any part of any response, waive minor technicalities and award the response to best serve the interests of TMD.

E. Catalogs, brand names, or manufacturer’s references are descriptive only, and indicate type and quality desired. Bids on brands of like nature and quality will be considered unless advertised under Texas Government Code § 2155.067. If a Bidder believes it can satisfy these specifications, it should bid its goods or services and explain how the specifications will be adequately met.

F. If bidding on specifications other than those stated within this solicitation, bid should show manufacturer, brand, or trade name, and other description of product offered. If other than brand(s) specified is offered, specifications, illustrations, and complete descriptions of product offered must be included with bid. Failure to take exception to specifications or reference data will require Bidder to furnish specified brand names, model numbers, etc.

G. Unless otherwise specified, all items bid must be new and unused and of current production.

H. All electrical items must meet all applicable Occupational Safety and Health Administration

(OSHA) standards and regulations, and bear the appropriate listing from Underwriters Laboratories (UL), Factory Mutual Research Corporation (FMRC), or National Electrical Manufacturers Association (NEMA).

I. Consistent and continued tie bidding may cause rejection of bids by TMD and investigation for anti-trust violations.

Page 7 of 27 Approved 10/16/2021

B.1.2 Financial Rating Report, Financial Resources, and Ability to Perform

A. Bidder must provide evidence of its financial resources and its ability to provide the commodities or perform the services for which Bidder is submitting a response. This includes information Bidder believes is pertinent to demonstrate its financial capability, financial solvency, and capacity to fulfill the requirements of this solicitation.

B. At a minimum, Bidder must submit a copy of at least one (1) rating from organizations such as Dun & Bradstreet (D&B) Business Information Report or Fitch Ratings. The report must include the Bidder’s Viability Score and the Portfolio Comparison Score or similar ratings. Failure to submit copies of the required financial ratings will result in disqualification.

C. Bidder must provide information and any other financial information reasonably requested by TMD consistent with the services provided by Bidder or otherwise required by the then applicable TMD policies for similar contracts.

D. If the contract is awarded to Bidder, Contractor must also submit to the Contract Administrator its financial rating information within 120 days after the end of Contractor’s fiscal year.

E. TMD reserves the right to investigate and determine the financial integrity and responsibility of a Bidder and to reject a response on the grounds of Bidder’s lack of financial soundness, or if TMD reasonably concludes, after reviewing the information submitted by Bidder as well as all other relevant information obtained by TMD, that significant issues exist that could jeopardize Bidder’s full and timely performance. TMDS also reserves this same right throughout the life of the Contract, including before executing any optional renewal amendment with Contractor.

B.2 INVOICE REQUIREMENTS

Invoices are Contractor’s billing for goods or services rendered. TMD will pay Contractor on the basis of itemized invoices submitted to and approved by TMD. The invoices must show the actual deliverables provided and the attendant charge. Itemized invoices must clearly identify the project phase or title, deliverables delivered, the number of hours that each allocated employee worked if applicable, and the date range of work performance for this associated charge.

A. Contractor’s invoice must include the following:

1. the Contract number or Purchase Order number;

2. remittance address; and

3. any prompt payment discount offered.

B. Contractor must send an email with the invoice copy to Payables@military.texas.gov and to the Contract Monitor (if applicable).

An original, hard-copy invoice, if required, will be submitted to the office designated below:

Texas Military Department (TMD) Attn: Accounts Payable Department

P.O. Box 5218, Building 11 Austin, Texas 78763-5218 mailto:Payables@military.texas.gov

Page 8 of 27 Approved 10/16/2021

The State of Texas will not incur any penalty for late payment if the invoice fails to conform to the requirements of this section or if Contractor did not mail the invoice to the appropriate addresses identified in this section.

B.3 PAYMENTS

A. TMD recommends that Contractor receive payments by electronic funds transfer (EFT), also known as direct deposit. If Contractor elects to be set up for direct deposit payment, Contractor must submit a completed Direct Deposit Authorization Form (Exhibit G.7).

B. Regardless as to whether Direct Deposit is chosen, Bidder must submit a completed Texas Application for Payee Identification Number (Exhibit G.4) to the following address:

Texas Military Department (TMD) Attn: Accounts Payable Department

AP_Vendor@military.texas.gov

Reference: Contractor Set-up for Solicitation TMD25-FMO-0039067

Notes: Contact Kristine Brock when completed at 512-782-3040 or Procurement@military.texas.gov.

C. If Contractor has previously submitted a completed Contractor Direct Deposit Authorization Form to TMD for another separate contract, another form is not required to be submitted.

B.3.1 Billing and Payment

A. TMD will not make any payments of any amount to Contractor until an accurate invoice is received that complies with Section B.2 above. TMD will notify Contractor if invoice is deemed to be inaccurate within 20 days of receipt.

B. Texas Government Code Chapter 2251 (the Prompt Payment Act) will govern payment and accrual of interest on any overdue payments.

C. If TMD, for any reason, including lack of supporting documentation, disputes any items in any invoices submitted by Contractor, TMD will place a hold on the disputed items and may pay the remaining amount of the invoice. TMD will timely notify Contractor of the dispute and request clarification or remedial action.

D. If the dispute is resolved in Contractor’s favor, TMD will pay the remaining portion of the original invoice in accordance with the Prompt Payment Act. If the dispute is resolved in TMD’s favor, Contractor must resubmit an invoice reflecting all corrections.

Page 9 of 27 Approved 10/16/2021

B.3.2 Payment Adjustment

A. TMD may elect to deduct from Contractor payment as specified in this section or any amount specified in or any money determined to be due as specified in the Contract.

B. If it is determined that the remaining amount of Contractor payment is not adequate to cover the money determined to be due to TMD, then all remaining Contractor payments will be withheld and an invoice issued to Contractor for the remaining amount due.

C. Contractor must pay the invoiced amount within 30 days of receipt unless Contractor and TMD mutually agree on an alternative payment method.

B.3.3 Late Payment

Any amount owed to Contractor more than one (1) day beyond the date such amount is due as described in this section will accrue interest each day that such amount is not paid at the rate specified by Texas Government Code § 2251.025, provided; however, that this provision will not excuse failure by TMD to make payment in strict accordance with the Contract.

B.3.4 Deductions for Unacceptable Compliance

If Contractor fails to comply with the terms of the Contract, TMD may withhold Contractor’s payment. If non-compliance results in TMD purchasing goods or services from another entity to remedy the non-compliance, TMD will deduct those costs from Contractor’s payment.

B.3.5 Withholding of Payment

A. TMD will have the right to withhold Contractor’s payment until the failures described below have been corrected.

1. Failure to submit reports or other documentation required in Section D—Contract Compliance Reports and Data required from Contractor;

2. Failure to comply with background check or security requirements;

3. Failure to respond to audit reports; and

4. Failure to correct identified areas of non-compliance to the satisfaction of TMD within ten days upon receipt of written notification.

B. TMD will not pay interest to Contractor for monies so withheld.

C. Contractor’s withheld payment will be released upon TMD’s satisfaction that compliance has been achieved for 30 consecutive days.

D. In the event that money is due to TMD for Contractor’s failure to provide adequate maintenance or replacement of the property as required in the Contract, the amount required for TMD to correct deficiencies and replace property will be withheld from the final payment.

Page 10 of 27 Approved 10/16/2021

E. With the exception of disputed issues, such withholding of final payment by TMD will not exceed 120 days from date of the Contract’s termination.

B.3.6 Debts and Delinquencies

TMD is prohibited from issuing any payment to a person or entity that has been reported as having an indebtedness or delinquency to the State of Texas. Contractor agrees and understands that, to the extent Contractor owes any debt or delinquent taxes to the State of Texas, TMD will apply any payments or other amounts Contractor is otherwise owed under the Contract toward the debt or delinquent taxes until the debt or delinquent taxes are paid in full. Contractor must comply with all applicable laws regarding satisfaction of debts or delinquencies to the State of Texas.

B.3.7 Right to Offset

In the event TMD determines that Contractor owes money to TMD under any contract or purchase order, TMD, upon providing Contractor with written notice of its intent to offset, will have the right to withhold monies due to Contractor with respect to the Contract or with respect to any other contract or purchase order with TMD and apply such monies to the money due to TMD.

B.4 MANDATORY PRICING SCHEDULE

Contract Term Pricing

The Bidder must submit its bid price within the Mandatory Pricing Sheet in Exhibit G.2, replicating, as necessary, in its exact format.

Bid price must be submitted on the Mandatory Pricing Sheet Bidders will price per unit shown. Unit prices will govern in the event of extension errors. If a price quotation is submitted as part of Bid, the quotation must be referenced in the response and signed by Bidder to establish formal linkage to the Bid.

Prices bid are firm throughout the term of the Contract. “Discount from List” bid pricing is not acceptable unless requested. Cash discounts are not considered in determining an award. Cash discounts offered will be taken if earned.

Page 11 of 27 Approved 10/16/2021

SECTION C - SPECIFICATIONS

C.1 INTRODUCTION

Texas Military Department seeks a skilled Contractor to install, repair, or replace all door locks, cores, closers, panic bars, and doors at Waco 2 Readiness Center located 2000 North New Road, Waco, TX 76707.

C.2 SPECIFICATIONS AND STATEMENT OF WORK

A. Work Hours:

1. Work is permitted between Monday through Friday from 8:00am-5:00pm

2. Contractor may coordinate with point of contact (POC) to schedule work outside these times (including holidays and weekends)

3. First date of work shall not be on a Friday of the week.

B. Total Lock Count: 71 locks

C. Lock and Door Requirements Note: All specifications are equivalent or better. If contractor bids an alternative item, contractor must provide literature on how the alternative item meets or exceeds the stated specifications.

1. Exterior Doors

a. Minimum of 3 locks each.

b. Commercial Grade Grade 1 Security Cylindrical Lock

i. Reference Brand (must be equivalent or better): BEST

ii. Reference Part #: 9K37AB15DS3626

c. 7-pin BEST CORMAX A2 Core

i. Reference Brand (must be equivalent or better): BEST

ii. Reference Model: CORMAX

iii. All Cores need to be Cormax BEST SFIC (Small Format Interchangeable Cores)

d. Provided Keys must be compatible and patented with the Best CORMAX A2 Core (must be equivalent or better).

2. Interior Doors

a. Minimum of 65 locks each.

b. BEST Commercial Grade Grade 2 Security Cylindrical Locks

Reference Part #: 7K37AB15DS3626

c. 7-pin BEST CORMAX A2 Core

i. Reference Brand (must be equivalent or better): BEST

ii. Reference Model (must be equivalent or better): CORMAX

d. Provided Keys must be compatible and patented with the 7-Pin Best CORMAX-A2 Core, or equivalent. (Texas Military Department Keying System Standards) This information will be provided to the awarded contractor.

3. Contractor shall provide a minimum of ten (10) copies of keys per one (1) exterior door and two (2) copies of keys per interior/office door.

4. All deadbolts are on interior doots.

Page 12 of 27 Approved 10/16/2021

D. Waco 2 RC Building:

1. Minimum of 50 locks each.

2. 1-Left hand and 1- Right hand exterior metal with panic exit device, closer only (no outside entry) (no Dub down on panic).

E. Old Wash Bay Building:

1. One double Door with level door lock and two interior side bolts to secure top and bottom of secondary doors?

2. A new door and frame will be needed. One-Double 3/0 exterior metal door with single handle with storage room lock and 2- flush bolts, 1 top 1 bottom mounted. Holder with chain assist.

F. Old Maintenance Shop:

1. Minimum of 20 locks each

2. One-3/0 interior solid core wood door with office lever action lock and closer.

3. Three (3) exterior doors will need new panic and closer with outside entry.

4. One (1) exterior door if no exiting panic will need panic and closer, no outside entry

5. Two (2) exterior doors with storage front locks and closer

6. One (1) exterior double door for mechanical room with office lock and 1closer

7. Eight (8) lever action locks for interior full doors

8. Seven (7) lever action and dead bolt for split or half door.

G. All existing panic hardware will be replaced (no Dub Down feature).

H. All stairway doors will have closer (no hold open).

I. Kitchen exterior door will have outside key entry and panic hardware replaced.

J. Drill Hall storeroom double door will have closers and one lever lock.

K. Supply room (next to vault/location reference) is currently non-lockable and need to be lockable. No panic devices, No mullion. Area needs clear for bulk/pallet movement.

L. Contractor shall provide a store front lock on the door located at Room 113.

M. Minimum of Thirty-one (31) office full doors will need lever action locks.

N. Four (4) split or half doors with lever action locks and dead bolts.

O. One (1) Exterior door for mechanical room with office lock and one (1) closer .

P. Contractor must perform a pre-work walk-through of entire job site with the TMD Contract

Monitor before beginning of work.

Q. Contractor must remove all debris from TMD property and dispose of it in accordance with all local, state, and federal regulations.

R. New Equipment only. No refurbished equipment.

Page 13 of 27 Approved 10/16/2021

C.3 DELIVERABLES

A. Old Maintenance Facility Building: (G.2 Mandatory Pricing Sheet list the locks and doors that are needed)

B. Work shall include but not limited to the following:

1. No permits are required because this is on government/state property.

2. Contractor shall provide all needed equipment and tools to complete installation.

3. Contractor shall provide all personal needed, license, certifications, insurance. All personnel shall maintain a valid State ID or Driver’s License to present upon entering the facility.

C.4 ACCEPTANCE CRITERIA

All bids will be “Not to Exceed” and “Turn Key”.

All questions regarding the SOW must be submitted in writing to the TMD’s Contract Administrator POC. The POC can be contacted by telephone for site visit information only. No authority is intended or implied that statement of work may be amended, or alternates accepted prior to bid opening without written approval from the TMD Procurement.

All items/equipment for completion are to be supplied by contractor to complete job.

Awarded contractor shall furnish all labor, tools, equipment, and transportation, as necessary to complete work. Awarded contractor shall be responsible for supervision, clean up and disposal and must have all applicable licenses, insurance and permits.

C.5 TMD PERSONNEL

C.5.1. TMD’s Contract Administrator

A. The Contract Administrator for administration of the Contract is Kristine Brock.

B. The telephone number for the Contract Administrator is 512-782-3040.

C. The email address is Procurement@military.texas.gov.

The Contract Administrator is responsible for the general administration of the Contract, negotiation of any changes, and issuance of written amendments to the Contract.

If TMD Contract Administrator and Contractor agree to amend the Contract, TMD will issue a written Amendment or Purchase Order Change Notice (POCN).

C.5.2 TMD’s Contract Monitor

A. The Contract Monitor for the Contract is Steve Krebs.

a. The telephone number for the Contract Monitor is 512-317-5492 (Mr. Krebs).

b. The email address for the Contract Monitor is steven.m.krebs2.nfg@army.mil.

Email is the preferred method of communication.

mailto:steven.m.krebs2.nfg@army.mil

Page 14 of 27 Approved 10/16/2021

B. TMD Alernative Contract Monitor Russell Coble.

a. The telephone number for the alternate Contract Monitor is 512-217-7775 (Mr.

Coble).

b. The email address for the alternate Contract Monitor is Russell.d.coble2.nfg@army.mil. Email is the preferred method of communication.

The Contract Monitor is not authorized to make any representations or commitments of any kind on behalf of TMD or the State of Texas.

The Contract Monitor does not have the authority to alter Contractor’s obligations or to amend the Contract in any way.

C.6 INSURANCE REQUIRED UNDER THE CONTRACT

In its response, Bidder must provide a statement of its intent to obtain and maintain for the term of the Contract (and any renewal periods or additional extensions) the minimum insurance coverage specified. Bidder should also describe other insurance coverage maintained by Bidder in the ordinary course of business and provide proof of same in its response. Proof of insurance and bond coverage may be provided in the form of current certificates of insurance. TMD and the State of Texas do not accept “self-insurance” coverage.

The awarded Contractor is required, within five (5) business days of Notice of Award or Purchase Order, to provide TMD with current certificates of insurance or other proof acceptable to TMD.

Failure to submit acceptable proof of insurance within such time period may result in TMD’s revocation of the award. Contractor must maintain the required insurance during the initial term and any optional renewal period exercised. Contractor is responsible for ensuring its subcontractors’ compliance with all insurance requirements.

mailto:Russell.d.coble2.nfg@army.mil

Page 15 of 27 Approved 10/16/2021

Minimum Required Amounts of Insurance Coverage Type of Insurance Each Occurrence/Aggregate Workers’ Compensation Statutory Limits for the State of Texas or for any state Contractor’s employee resides in Employer’s Liability Bodily Injury by Accident Bodily Injury by Disease Bodily Injury by Disease

$1,000,000 Each Accident $1,000,000 Each Employee $1,000,000 Policy Limit

Commercial General Liability (occurrence based)

Bodily Injury and Property Damage $1,000,000 Each Occurrence Limit $2,000,000 Aggregate Limit $2,000,000 Products/Completed Operations Aggregate Limit $1,000,000 Personal Injury and Advertising Liability $50,000 Damage to Premises Rented $5,000 Medical Payments

Automobile Liability All Owned, Hired and Non-Owned Vehicles

$500,000 Combined Single Limit (for each accident)

Umbrella/Excess Liability $1,000,000 Per Occurrence Commercial Crime $50,000 Each Occurrence

All required insurance coverage must be issued from a company or companies with a Financial Strength Rating of “A” or better from A.M. Best Company, Inc.

All insurance policies for required coverage must be issued by companies authorized to do business under the laws of the State of Texas and in a form satisfactory to TMD. All required insurance contracts must:

(1) be written on a primary and non-contributory basis with any other insurance coverages Bidder currently has in place; and

(2) include a Waiver of Subrogation Clause.

All certificates of insurance for required coverage other than workers’ compensation and professional liability must name the Texas Military Department as additional insured.

Contractor shall:

A. provide written documentation under this section to the Contract Administrator by email at least 30 calendar days prior to any cancellation, non-renewal, or material change of a required policy.

B. ensure all insurance policies and certificates of insurance for required coverage are written to include all products, services, and locations related to Contractor’s performance under the Contract; and

C. deliver all renewals policies at least ten calendar days prior of any expiration of a required policy to Contract Administrator by emails. All renewal policies and corresponding certificates of insurance must meet all terms set forth in the Contract.

Page 16 of 27 Approved 10/16/2021

D. ensure that all provisions of the Contract concerning liability, duty, and standard of care, together with the indemnification provision, are underwritten by contractual liability coverage sufficient to include the Contractor’s obligations under the Contract.

E. obtain and maintain insurance policies that provide coverage for Contractor’s principals, officers, directors, shareholders, partners, owners, agents, employees, subcontractors, independent contractors, and any other representatives who may provide services under the Contract.

C.7 WARRANTY CALL RESPONSE TIME

TMD requires Contractor to respond to any warranty call concerning this project within a 48-hour time period. For any warranty call issued concerning the exterior doors, Contractor will have seven

(7) days to replace defective products after receipt of notification by TMD that a warranty issue exists. For any warranty call issue concerning the interior doors, Contractor will have fourteen (14) days to replace defective products.

C.8 PRODUCT WARRANTY

Each product proposed is to be warranted against defects in workmanship and material for a period of one (1) year or manufacturer’s warranty period whichever is longer following TMD acceptance of Project.

C.9 RETAINAGE

TMD reserves the right to withhold 100% retainage from final payment until all work is accepted by TMD and warranty or equipment operation and maintenance documents are in hand (if applicable).

This includes required original Contractor provided installation letters on its letterhead, applicable material manufacturer industry standard warranties, any equipment operation and maintenance manuals, or other project inclusive documentation for the respective trades associated with this project.

C.10 REFERENCES

Bidders must submit three (3) past or current projects of similar size and complexity performed within the past five (5) years which must be returned with the Bid.

Page 17 of 27 Approved 10/16/2021

SECTION D—CONTRACT COMPLIANCE REPORTS AND DATA

Contractor must submit the reports and all additional Contractor documentation requirements in this section during the course of the Contract. These deliverables may be revised or additional ones may be required at TMD’s sole discretion.

FREQUENCY DUE DATE REPORT ITEM AUTHORITY TMD PERSONNEL TO

RECEIVE REPORT

Other Prior to Execution of Contract

Insurance Requirements IFB, Section C.8

Contract Administrator

Completion of Contract

Date work is completed.

Invoicing – Specific to the Contract IFB Section B.2

Payables@military.texas.gov with a copy to Contract Monitor

Weekly First Monday of every week

Status reports on any issues and the progress of any existing issues.

Contract Monitor mailto:Payables@military.texas.gov

Page 18 of 27 Approved 10/16/2021

SECTION E—INSTRUCTIONS, CONDITIONS, AND NOTICES TO BIDDERS

E.1 RESPONSE PREPARATION INSTRUCTIONS

Purpose of Instructions

A. These instructions are designed to assure the submission of information essential to the understanding and the comprehensive evaluation of Bidder’s response.

B. Responses must be prepared in accordance with these instructions providing all required information in the format specified.

C. Failure of a response to show compliance with these instructions and submit all documentation may be grounds for disqualification of the response from further consideration unless stated otherwise within this solicitation.

Submission of responses

A. Responses will be typed for standard letter paper (8-1/2” x 11”) (except for graphic information being requested). Bidder’s response must be paginated, contain a full table of contents, and have component sections clearly identified by tabs (hard copy) or bookmarks (electronic).

B. Sealed responses must be received by TMD no later than the deadline established and submitted to:

Texas Military Department Procurement and Contract Services Procurement@military.texas.gov Solicitation No. TMD25-FMO-0039067

Subject: TMD25-FMO-0039067 – Bid Response – Vendor Name

C. Bidder must demonstrate that bidder’s operations conform to applicable TMD, state, and federal policies and standards.

D. Bidder must submit only material directly pertinent to the requirements of this solicitation.

Extraneous narrative, elaborate brochures, uninformative public relations material, including Bidder’s policies, procedures, and post orders for which no deviation to TMD Policy is being requested, and other similar documents will not be submitted.

E.2 AMENDMENTS TO THE SOLICITATION

A. If this solicitation is amended all terms and conditions which are not modified remain unchanged.

B. Bidders must acknowledge receipt of all amendment(s) to this solicitation by signing and returning the amendment(s), identifying the amendment number and date in the space provided for this purpose on the form for submitting a response or by letter.

Page 19 of 27 Approved 10/16/2021

C. Bidder must submit the acknowledgement to TMD by the time specified for receipt of responses.

D. Failure to acknowledge amendment(s) by Bidder may subject its response to rejection.

E.3 LATE SUBMISSIONS, MODIFICATIONS AND WITHDRAWALS OF RESPONSES

A. Responses will be time stamped at the office designated in the solicitation on or before the date and time specified in this solicitation.

B. Any response received at the designated location after the specified date and time will not be considered.

C. Responses cannot be altered, amended or modified by email, fax or otherwise after closing date and time.

D. Alterations made before closing time will be initialed by Bidder or its authorized representative.

E. No responses can be withdrawn after closing date and time without approval by TMD. Should a Bidder, after closing time, request its response be withdrawn, the request must be made in writing.

F. TMD is not responsible for submissions delivered to TMD after the date and time stated on the first page of this solicitation. This includes delays associated with courier delivery services. It is the Bidder’s responsibility to ensure that it submits, and that TMD receives, its complete response timely. TMD recommends that Bidder submit their complete response well in advance of the due date and time stated on the first page of this solicitation.

G. TMD takes no responsibility for electronic responses that are captured, blocked, filtered, quarantined, or otherwise prevented from reaching the proper destination server by any TMD anti-virus or other security software.

E.4 SIGNATURES ON RESPONSE SUBMITTED

A. Responses from a partnership will be signed in the firm name by at least one (1) general partner or in the firm name by an attorney-in-fact.

B. Responses signed by an attorney-in-fact, will include a Power of Attorney evidencing the authority to sign response, dated and executed by all partners in the firm.

C. Responses from a corporation will have the correct legal corporate name and the signature of an authorized officer of the corporation.

D. The title of office held by the person signing for the corporation will appear below the signature of the officer.

E. Responses from an individual doing business under a firm or fictitious name will be signed in the same name of the individual doing business under the proper firm name.

Page 20 of 27 Approved 10/16/2021

F. Joint venture responses will be signed by all members or by a member of the joint venture if there is attached to the response a copy of the joint venture agreement evidencing that the response is signed by the member with authority to bind the joint venture.

E.5 RESPONSE ACCEPTANCE PERIOD

A. All responses will be valid for 120 days after the solicitation opening date and will constitute an irrevocable response to TMD for the 120-day period.

B. Such period may be extended beyond the 120 days upon mutual written agreement of both parties.

E.6 CONTRACT AWARD

A. TMD may award one (1) Contract resulting from this solicitation to the responsible Bidder, whose response, is lowest price meeting specifications.

B. A purchase order mailed or otherwise furnished to successful Bidder(s) within the time for acceptance specified in the response will result in a binding Contract without further action by either party.

C. A Purchase Order shall be established in accordance with the specifications, terms and conditions referenced in IFB TMD25-FMO-0039067. The following documents shall be incorporated and made a part of this order and in the following order of precedence:

a. TMD PO 25-#####

b. TMD IFB TMD25-FMO-0039067

c. Vendor’s Response to IFB TMD25-FMO-0039067

D. The Contract shall consist of the Notice of Award; this Solicitation, including addenda; and the

Response, including clarifications submitted at the request of CPA. In the event of any conflict or contradiction between or among these documents, the Notice of Award, as modified by any Contract Amendments, controls over the Solicitation and the Response. The Solicitation, as modified by any Addenda, controls over the Response.

E.7 TMD’S RIGHTS

A. TMD reserves the right to waive, change, add or delete any terms or conditions of this solicitation.

B. TMD may:

1. reject any or all responses if such action is in the public interest;

2. accept other than the lowest priced response; and

3. waive minor informalities and minor irregularities in responses received.

Page 21 of 27 Approved 10/16/2021

C. Waiver of deviations in any response will not constitute a modification of this solicitation and will not preclude TMD from asserting all rights against the Bidder for failure to fully comply with all terms and conditions of this solicitation. Copyrighted responses are unacceptable and are subject to disqualification as non-responsive. TMD reserves the right to make any corrections or include additional requirements in the resulting Contract prior to issuance which are necessary for TMD’s compliance, as an agency of the State of Texas, with all state and federal requirements. TMD reserves the right to disqualify any response which asserts any copyright on any TMD-created form which is specifically designated by this solicitation to be a form that will be completed and included in a response submitted in response to this solicitation.

D. TMD reserves the right to reject any one (1) response or all responses or portions of responses submitted in response to this solicitation.

E. The submission of a response has the effect of waiving proprietary rights or confidentiality.

F. All responses and any content provided by the Bidder are considered the property of TMD for use for the life of any resulting Contract as determined by TMD with respect to the scope of the project.

G. TMD is not liable for any costs or damages that may be incurred by Bidders or prospective contractors in the preparation, formulation, or presentation of a response.

H. In case of ambiguity or lack of clarity, TMD may adopt such interpretations as may be advantageous to TMD.

I. TMD reserves the right to withdraw this solicitation at any time for any reason.

J. TMD reserves the right to award no Contract and to solicit additional responses at a later time.

K. TMD incurs no obligation regarding this solicitation unless and until a Contract is fully executed by the parties. However, all responses received by TMD will remain confidential until the evaluation process is complete.

L. TMD will not hold a public bid opening event.

E.8 RESPONSE SUBMISSION INSTRUCTIONS

E.8.1 Volume One – Contract Forms and Required Response Information

This section will contain the following completed contract sections (on original forms) with original signatures, where applicable:

A. Solicitation, Page 1 (with amendment(s) noted on this page or signed amendment(s) attached to this form);

B. Contractor Certifications should be submitted with the bid.

Page 22 of 27 Approved 10/16/2021

C. The name and address of Bidder’s insurance carrier(s), along with a statement of liability from the carrier(s) issuing the policies saying that such policies are available to Bidder. For the purpose of responding to this solicitation, Bidder will not be required to purchase insurance, but must show the ability to provide such insurance as specified in the section entitled “Insurance Requirements,” if Bidder’s response is selected.

D. A Redacted Solicitation and Contract response if applicable;

E. Exhibit G.5, Direct Deposit Authorization Form, completed if choosing direct deposit as a possible payment option;

F. Exhibit G.4, Application for Texas Identification Number;

G. Documentation from the appropriate state entity that indicates that Bidder is properly certified to conduct business in the State of Texas (e.g., The Certificate of Existence from the Texas Secretary of State and the Certificate of Account Status from the Comptroller of Public Accounts); and

E.8.2 Volume Two – Information Section

A. Cover Page: List name and address of Bidder, date of response, solicitation identifier, and signature of authorized official.

B. Information Sheet: Including all information required of Bidder and any subcontractors.

1. Name and address (including telephone number) of Bidder and all subcontractors.

2. Business form of Bidder and its subcontractors (e.g., corporation, partnership).

3. Date and state of incorporation.

4. Names and addresses of principal officers, directors, or partners.

C. Bidder must identify and provide in the enclosed Verification of Experience, a minimum of three (3) past or current projects of similar size and complexity performed within the past five

(5) years. Bidder must provide, at a minimum, the contact name, email address, phone number, and title for each reference provided. Additionally, Bidder must provide project begin and end dates, brief descriptions of deliverables, overall costs, and statement of work performed.

D. Organizational, biographical, and Financial Rating and solvency information for the Bidder and all third-party / subcontractors proposed to fulfill service requirements.

E. The Bidder must specifically address, within its response, the following requests for information as detailed throughout this solicitation. TMD has endeavored to include a complete listing of such submittal requests; however, in the event TMD omitted a requirement, Bidder is responsible for ensuring that all such information is included within its response.

1. G.2 Mandatory Pricing Sheet

2. C.6 Insurance

3. All required submittals under Section E.8.1, Contract Forms and Required response

Information and Section E.8.2, Information Section.

Page 23 of 27 Approved 10/16/2021

F. Exceptions. No exceptions should be included in response. Bids received that take any exceptions to this solicitation will be disqualified and deemed non-responsive to the solicitation and TMD will remove the bid from further consideration.

G. All specifications are equivalent or better. If contractor bids an alternative item, contractor must provide literature on how the alternative item meets or exceeds the stated specifications.

E.8.3 Volume Three – Cost and Pricing Response

Bidder must provide updated pricing schedules in the exact format noted in Section B.4 of this solicitation.

E.9 DISCUSSION AND CORRESPONDENCE

A. All communications and questions concerning this solicitation, including any of a technical nature, will be made in writing only to:

Kristine Brock, CTCD, CTCM, TMD Contract Administrator Procurement and Contract Services Email: Procurement@military.texas.gov

B. Written responses to the questions will then be provided to all parties requesting copies of this solicitation through TMD’s Procurement and Contract Services.

C. Bidder should rely only on the written information provided in this manner. Bidder is specifically cautioned against relying on any oral information.

D. All Bidders are specifically barred from making contact with any TMD personnel involved in this solicitation for the purpose of discussing its responses.

E. Bidder may; however, seek clarifications of the solicitation through the written process described above.

F. Bidder is reminded that 06/24/2025 at 2:00 P.M. Central Time is the last day to submit written questions for clarification by TMD.

G. Unauthorized contacts with TMD personnel by any Bidder may result in Bidder’s response being rejected in its entirety.

E.10 SUBMISSIONS SUBJECT TO THE TEXAS PUBLIC INFORMATION ACT

TMD is a governmental body subject to the Texas Public Information Act (PIA), Texas Government Code Chapter 552. The response and other information submitted to TMD by Bidder are subject to release as public information by TMD. The response and other submitted information is presumed subject to disclosure unless a specific exception to disclosure under the PIA applies.

If it is necessary for Bidder to include proprietary or otherwise confidential information in its response or other submitted information, Bidder must clearly label that proprietary or confidential information and identify the legal basis for confidentiality. Merely making a blanket claim that the

Page 24 of 27 Approved 10/16/2021 entire response is protected from disclosure because it contains some proprietary information is not acceptable, and will make the entire response subject to release under the PIA.

In order to trigger the process of seeking an Attorney General opinion on the release of proprietary or confidential information, the specific provisions of the response that are considered by Bidder to be proprietary or confidential must be clearly labeled as described above. Any information which is not clearly identified by Bidder as proprietary or confidential will be deemed subject to disclosure under the PIA. Bidder will irrevocably deemed to have waived, and Bidder agrees to fully indemnify the State of Texas and TMD against any claim of infringement by TMD regarding the intellectual property rights of Bidder or any third party for any materials appearing in the response.

If Bidder’s response contains any information which Bidder claims is confidential and not subject to release under the PIA, Bidder must prepare and deliver to TMD two (2) emails containing the following information:

A. One (1) email containing all of the Bidder’s submissions under this solicitation. Bidder must mark these “Complete Bid Documents, [Bidder’s Name], [TMD] SOLICITATION number [TMD25-FMO-0039067]. CONTAINS CONFIDENTIAL INFORMATION.”

B. One (1) email containing all of the Bidder’s submissions with all information claimed as confidential excised, blacked out, or otherwise redacted. This email must also contain an Appendix which contains clear references to all redacted information including a general description of the redacted information. Bidder must subject this email as “For Public Release: Redacted Version of [Bidder’s Name], [TMD25-FMO-0039067]SOLICITATION Number].”

E.11 AGENCY POSTING OF CONTRACTS

After award, information, documentation, and other material in connection with this solicitation or the Contract may be subject to public disclosure under the Public Information Act.

Without prior written notice to Bidder, the redacted response may be posted on TMD’s website as part of this Contract per Texas Government Code § 2261.253(a).

E.12 SITE VISTS

Two (2) mandatory site visits shall be held at TMD Waco #2 Army Reserve Building located at 2000 North New Road, Waco, Texas 76707. These site visits will be held on 06/10/2025 and 9:00 A.M.

and 1:00 P.M. The purpose of the site vists is to answer any questions regarding completing and submitting the bid. There will be no technical questions answered at this Site Visit. All questions must be submitted in writing according to the above schedule.

Note: Contractors will be required to attend a minimum of (1) site visit to be eligible for award.

Contractors may attend both site visits to gain a clearer understanding of the requirements of this project.

Page 25 of 27 Approved 10/16/2021

SECTION F—EVALUATION CRITERIA

TMD will evaluate responses in accordance with the best value standard in Texas Government Code § 2156.007.

TMD reserves the right to conduct studies and other investigations as necessary to evaluate any bid.

TMD, in its sole discretion, may amend or modify any provisions of the solicitation, or withdraw this solicitation at any time prior to award of a contract.