ESBD_410188_1745507467836_Attachment F - HSP.pdf

All subcontractors must comply with Texas Government Code § 572.069; which states the "revolving door" would prohibit a former employee of a state agency from providing certain services.

The HUB Goal for this solicitation is 21.1% for all building construction including general contractors and operative builders� contracts.

The following are NIGP Class/Item Code numbers for some possible subcontracting trades:

906 - 04 Agricultural Development, Architectural Services 906 - 07 Architect Services, Professional, (Not Otherwise Classified), Including

Consulting 906 - 10 Buildings, Architectural Design Services 906 - 12 Building Sanitation, Architectural Services 906 - 19 Concrete, Architectural Services 906 - 27 Energy Management, Architectural Services 906 - 28 Energy Conservation; New Energy Sources, Solar, etc., Architectural Services 906 - 29 Environmental and Energy, Architectural Services 906 - 30 Fire Protection, Architectural Services 906 - 38 General Construction, Architectural Services 906 - 40 Graphic Design, Architectural Services 906 - 44 Heating; Ventilating; Air Conditioning, Architectural Services 906 - 54 Irrigation; Drainage; Flood Control, Architectural Services 906 - 56 Landscape, Architectural Services 906 - 57 Land Development and Planning, Architectural Services 906 - 58 Lighting, Interior, Exterior, Architectural Services 906 - 61 Models of Layouts and Buildings to Scale, Architectural Services 906 - 92 Utilities, Gas, Steam, Electric, Architectural Services 909 - 03 Administration of Contracts: Summary of Work, Quality Control, Project

Closeout, etc.

909 - 33 Contractor Compliance Monitoring Services 909 - 74 Site Clean-up, Pre-Construction 907 - 75 Site Assessment and Site Field Observation 909 - 76 Site Work 910 - 17 Energy Computerized Control System, HVAC, Lighting, Utilities, etc., Installation, Maintenance and Repair Services 910 - 23 Firestop Systems, Including Installation and Fireproofing Services 910 - 66 Roofing, Gutters, and Downspouts Maintenance and Repair Services 912 - 40 Demolition Services 912 - 75 Quality Control Testing Services for Construction 914 - 27 Carpentry 914 - 73 Roofing and Siding 917 - 05 Contract Labor 918 - 41 Energy Conservation Consulting 918 - 54 Furnishings Consulting 918 - 91 Roofing Consulting 920 - 65 *System Requirements Quality Assurance Review

925 - 17 Civil Engineering 925 - 28 Drainage Engineering 925 - 31 Electrical Engineering, Including Cogeneration Design Services 925 - 34 Energy Management Engineering 925 - 36 Engineering Services (Not Otherwise Classified) 925 - 37 Facilities Design Engineering 925 - 38 Field Engineering 925 - 39 Fire Protection Engineering 925 - 44 General Construction: Management, Scheduling, Cost Estimation Engineering 925 - 55 Inspecting, General Engineering 925 - 56 Inspecting, Structural Engineering 925 - 58 Irrigation; Drainage; Flood Control Engineering 925 - 61 Land Development and Planning Engineering 925 - 81 Roofing Engineering 925 - 84 Security Systems; Intruder and Smoke Detection Engineering 925 - 86 Surveyor Services, Land 925 - 88 Structural Engineering 925 - 95 Utilities, Gas, Steam, Electric Engineering 925 - 96 Waste Water Treatment Engineering 936 - 33 Fire Protection Equipment and Systems Including Fire Hydrants, Fire Sprinkler

Systems, Smoke Detectors, Jaws of Life, Fire Protection Material Treatment, Firestop and Fire Barriers, etc. Inspection, Maintenance and Repair

936 - 70 Roofing Equipment and Machinery Maintenance and Repair 939 - 38 Energy Systems, Solar, Installation Services 941 - 67 IT Utility Services Electrical 958 - 77 Project Management Services 967 - 42 Furniture and Furnishings Manufacturing and Production Services 968 - 48 Inspection Services, Electrical Instrumentation and Control 990 - 50 *Installation of Security and Alarm Equipment 992 - 39 Electrical Systems Testing Services

Respondents using Method B must provide notice to three (3) or more Texas Certified HUBs for each craft. Additionally, two (2) or more trade organizations or development centers in Texas who assist in identifying potential HUBs must also be notified. These notifications must be done at least seven (7) working days prior to submitting your bid response to the contracting agency to allow time for the potential subcontractor to respond. The email logs should be submitted with the HSP paperwork as documentation.

Please contact our HUB office with any questions �

HUB@military.texas.gov

Sue D�Angelo 512-782-3915 512-939-6375

HUB Subcontracting Opportunity Notification Form

Section B

Section C, Item 2 Section C, Item 1 Section A

SECTION A

Company Name:

Central Time Date (mm/dd/yyyy)

Point-of-Contact:

E-mail Address:

State of Texas VID #:

SECTION B

Agency Name:

Point-of-Contact: Phone #:

Requisition #: Bid Open Date:

(mm/dd/yyyy)

SECTION C

1. Potential Subcontractor’s Bid Response Due Date:

If you would like for our company to consider your company’s bid for the subcontracting opportunity identified below in Item 2, we must receive your bid response no later than

2. Subcontracting Opportunity Scope of Work:

3. Required Qualifications: Not Applicable

4. Bonding/Insurance Requirements: Not Applicable

5. Location to review plans/specifications: Not Applicable on

Phone #:

Fax #: