ESBD_359245_1715696909322_SOLICIEXH_F.4_405-24R0018018_Product Specifications.pdf
PDF 117 KB Posted
- Attached to
- Low Power Variable Optics Testing
- Solicitation number
- 405-24R0018018
- Issued by
- Texas
About this file
The document provided is an exhibit detailing the technical specifications for Low Power Variable Optics (LPVO) with mounting systems for the Texas Department of Public Safety. The LPVO must meet construction, magnification, color, mounting, and reticle requirements. Specific details include a 30mm or larger main tube, first focal plane reticle, illuminated and etched reticle, and adjustability for windage and elevation. The optic must also be compatible with night vision equipment utilized by the Department. The document also includes information on the power supply, size, and weight limitations for the LPVO.
The related state and local contract opportunity is for the Texas Department of Public Safety to test LPVO with mounting systems for a picatinny rail system. Vendors are invited to participate in the testing based on the provided specifications.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Exhibit F.4
Low Power Variable Optic for Rifle Submission Specifications
A. TECHNICAL REQUIREMENTS:
1. Construction: Steel, Aluminum, Magnesium or Titanium.
2. No greater than 1-8 magnification and no less than 1-4 magnification.
3. LPVO and mount shall be a shade of black, tan, or other earth tone.
4. Mounting shall be compatible to an AR style upper receiver, for example Daniel Defense
DDM4V7:
a. Shall mount securely to the Daniel Defense DDM4V7 factory upper receiver picatinny rail.
b. One piece cantilever mount, with a zero MOA cant.
c. Semi-permanent thread-lock substances, such as Loctite, may be used.
5. First focal plane.
6. Locking turrets and/or covers, no open/exposed or tactical turrets.
7. Flip-up scope covers.
8. Main tube 30 mm or larger.
9. Throw lever.
The sight must not allow for any movement once installed, per the manufacture specifications.
B. RETICLE SPECIFICATIONS:
1. Shall have a center point of aim.
2. Shall be Illuminated and etched.
3. Color will be red and/or green.
4. Objective lens shall be 24mm or larger.
5. Rear diopter-focus adjustment only.
6. Brightness shall be adjustable and range from being visible under direct sunlight to reduced illumination during low light or nighttime operations.
a. Auto brightness feature (if offered) shall have a disabled option.
7. Will be equipped with settings or modes that are compatible with Night Vision equipment utilized by Department units.
8. Water/fog proof and inert gas purged.
9. Eye relief shall be no less than 3.5 inches at 1x setting.
10. Aiming point shall be clear, crisp, and clearly visible while shooter is focused on target
(with low to no parallax distortion).
11. Shall have adjustments for windage and elevation to allow the sight to be zeroed.
a. Adjustments shall require a deliberate action to change the zero.
b. If a proprietary tool is needed, the vendor will supply the tool.
C. Power Supply:
1. Shall be electronically operated by a removable and replaceable battery power source that is readily available on the commercial market.
2. The battery must be accessible without removing the optic from the firearm.
D. Size/Weight
1. The optic shall not exceed 11 inches in length.
2. Weight and size shall not interfere with the operation of the Daniel Defense DDM4V7.
File details come from the government source that posted it. Updated .