Amendment A0001 - EP2956-22.pdf

PDF 661 KB Posted Apr 28, 2022

Attached to: Brush Guards & Push Bumpers
Solicitation number: EP2956-22
Issued by: Department of Justice Bureau of Prisons Correctional Facilities

View the file

Other files

File	Type	Posted
Brushguards and Push bumpers Material Checklist.pdf	PDF	Apr 20, 2022
Business_Mgmt_Quest._FBG.pdf	PDF	Apr 20, 2022
Solicitation EP2956-22.pdf	PDF	Apr 20, 2022

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

AMENDMENT OF SOLICITATION/ MODIFICATION OF CONTRACT

1. CONTRACT ID CODE PAGE OF PAGES

1 2

2. AMENDMENT/MODIFICATION NO.

3. EFFECTIVE DATE

4. REQUISITION/PURCHASE REQ. NO.

5. PROJECT NO. (If applicable)

A0001 04/28/2022

6. ISSUED BY CODE

7. ADMINISTERED BY (If other than Item 6) CODE

UNICOR, FPI CENTRAL OFFICE

400 1ST ST NW

WASHINGTON DC 20534-0004

See Block 6

8. NAME AND ADDRESS OF CONTRACTOR (No., street, country, State and Zip Code) (x)

9A. AMENDMENT OF SOLICITATION NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE 04/18/2022

11. THIS ITEM ONLY APPLIES TO AMENDMENT OF SOLICITATIONS

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, Appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103 (b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF :

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return 1 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

This amendment is to change the description on all of the items listed on the solicitation.

Description is changing from "one piece design" to "may consist of several pieces that bolt together".

See attached amended material checklists with updated descriptions.

All other terms and conditions remain the same.

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

Omar Sanchez, Contracting Officer 15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

04/28/2022(Signature of the person authorized to sign) (Signature of contracting officer)

NSN 7540-01-152-8070

PREVIOUS EDITION UNUSABLE

30-105

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR(48 CFR) 53.243

X The above numbered solicitation is amended as set forth in Item 14. The hour and the date specified for receipt of Offers is extended, X i s not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods: (a) By completing items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment number. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

EP2956-22

ITEM: AUT9528-22 HEAVY-DUTY BRUSH GRILL GUARD

COMPONENT SPECIFICATION & FEATURES CHECKLIST: PASS/FAIL

1 ) Will Be Vehicle And Year Specific: PASS/FAIL

2 ) PASS/FAIL

3 ) May consist of several pieces that bolt together, hardware must be provided PASS/FAIL 4 ) Heavy Duty High Strength Construction PASS/FAIL 5 ) Must Allow For Vehicle Original Hood, Wheel And Suspension Travel PASS/FAIL

6 ) PASS/FAIL

7 ) PASS/FAIL

8 ) Must Not Obstruct OEM Lighting PASS/FAIL 9 ) Must Utilize Existing OEM Tow Hooks If Equipped PASS/FAIL

10 ) Meets Automakers Requirements For Front End Weight Limitations PASS/FAIL 11 ) Does Not Interfere With Airbag Supplement Restraint System PASS/FAIL 12 ) Pushing Surface To Consist Of Mar-Resistant Heavy Duty Rubber PASS/FAIL

13 ) PASS/FAIL

14 ) PASS/FAIL

15 ) Must Include All Grade 5 Or Better Mounting Hardware PASS/FAIL

16 ) PASS/FAIL

17 ) PASS/FAIL

18 ) PASS/FAIL

*MUST INCLUDE ALL MOUNTING HARDWARE PASS/FAIL

*MUST INCLUDE ALL INSTALLATION INSTRUCTIONS PASS/FAIL

*MUST NOT INCLUDE ANY TOOLS PASS/FAIL

This Material Is Current Year Specific And Must Be Test Fitted Before Bulk Ordering To Ensure Vehicle Compatibility.

Must Provide Grille Protection With A Minimum 3/4-# 9 Expanded Metal

Mounting Brackets Designed To Be Mounted To Strongest Available Points On Vehicle Dependent On Vehicle Make, Model And Year Must Have A Black Powder Coat Finish Applied In A Consistent Thickness .003 To .005 Mill.

Must Include A Packing List Of All Material Provided In Shipping Container

ADDITIONAL COMMENTS:

Identification Labels Clearly Visible On Opposite Sides Of The Shipping Container Exterior To Identify Year Make And Model Of The Vehicle

BRUSHGUARD MATERIAL CHECKLIST

INSTRUCTIONS: PLEASE INSPECT AND REVIEW THE MATERIAL(S) LISTED BELOW FOR ADHERENCE TO THE MANUFACTURER'S REQUIREMENTS. LIST ANY DISCREPANCIES OR DEFECTS NOTICED DURING THE INSPECTION.

DESCRIPTION: THIS BRUSH GRILLE GUARD MUST BE DESIGNED FOR THE CURRENT YEAR MODEL CHEVY 1500 PICK- UP TRUCK. IT IS TO PROVIDE PROTECTION FOR HEADLIGHTS, GRILLE, HOOD, AND FRONT FENDERS FROM ROAD

HAZARDS WITHOUT JEOPARDIZING THE VEHICLES PERFORMANCE.

COMMENTS

Designed For Installation Utilizing Existing Mounting Locations With No Drilling Required

Must Be Wrap Around Style To Completely Protect The Headlight And Turn Signal Assembly With Contoured Uprights To Match Specific Year Model Vehicle Line And Aerodynamics

ITEM: AUT9530-22 HEAVY-DUTY BRUSH GRILL GUARD

1 ) Will Be Vehicle And Year Specific: PASS/FAIL

2 ) PASS/FAIL

6 ) PASS/FAIL

7 ) PASS/FAIL

8 ) Must Not Obstruct OEM Lighting PASS/FAIL 9 ) Must Utilize Existing OEM Tow Hooks If Equipped PASS/FAIL

13 ) PASS/FAIL

14 ) PASS/FAIL

15 ) Must Include All Grade 5 Or Better Mounting Hardware PASS/FAIL

16 ) PASS/FAIL

17 ) PASS/FAIL

18 ) PASS/FAIL

*MUST INCLUDE ALL MOUNTING HARDWARE PASS/FAIL

*MUST INCLUDE ALL INSTALLATION INSTRUCTIONS PASS/FAIL

*MUST NOT INCLUDE ANY TOOLS PASS/FAIL

Designed For Installation Utilizing Existing Mounting Locations With No Drilling Required

BRUSHGUARD MATERIAL CHECKLIST

INSTRUCTIONS: PLEASE INSPECT AND REVIEW THE MATERIAL(S) LISTED BELOW FOR ADHERENCE TO THE MANUFACTURER'S REQUIREMENTS. LIST ANY DISCREPANCIES OR DEFECTS NOTICED DURING THE INSPECTION.

DESCRIPTION: THIS BRUSH GRILLE GUARD MUST BE DESIGNED FOR THE CURRENT YEAR MODEL CHEVY 2500-3500 PICK-UP TRUCK. IT IS TO PROVIDE PROTECTION FOR HEADLIGHTS, GRILLE, HOOD, AND FRONT FENDERS FROM ROAD

HAZARDS WITHOUT JEOPARDIZING THE VEHICLES PERFORMANCE.

COMMENTS

Mounting Brackets Designed To Be Mounted To Strongest Available Points On Vehicle Dependent On Vehicle Make, Model And Year

Must Be Wrap Around Style To Completely Protect The Headlight And Turn Signal Assembly With Contoured Uprights To Match Specific Year Model Vehicle Line And Aerodynamics

Must Provide Grille Protection With A Minimum 3/4-# 9 Expanded Metal

Must Have A Black Powder Coat Finish Applied In A Consistent Thickness .003 To .005 Mill.

Must Include A Packing List Of All Material Provided In Shipping Container Identification Labels Clearly Visible On Opposite Sides Of The Shipping Container Exterior To Identify Year Make And Model Of The Vehicle This Material Is Current Year Specific And Must Be Test Fitted Before Bulk Ordering To Ensure Vehicle Compatibility.

ADDITIONAL COMMENTS:

ITEM: AUT9152-22 HEAVY-DUTY BRUSH GRILL GUARD

1 ) Will Be Vehicle And Year Specific: PASS/FAIL

2 ) PASS/FAIL

6 ) PASS/FAIL

7 ) PASS/FAIL

8 ) Must Not Obstruct OEM Lighting PASS/FAIL 9 ) Must Utilize Existing OEM Tow Hooks If Equipped PASS/FAIL

13 ) PASS/FAIL

14 ) PASS/FAIL

15 ) Must Include All Grade 5 Or Better Mounting Hardware PASS/FAIL

16 ) PASS/FAIL

17 ) PASS/FAIL

18 ) PASS/FAIL

*MUST INCLUDE ALL MOUNTING HARDWARE PASS/FAIL

*MUST INCLUDE ALL INSTALLATION INSTRUCTIONS PASS/FAIL

*MUST NOT INCLUDE ANY TOOLS PASS/FAIL

Designed For Installation Utilizing Existing Mounting Locations With No Drilling Required

BRUSHGUARD MATERIAL CHECKLIST

INSTRUCTIONS: PLEASE INSPECT AND REVIEW THE MATERIAL(S) LISTED BELOW FOR ADHERENCE TO THE MANUFACTURER'S REQUIREMENTS. LIST ANY DISCREPANCIES OR DEFECTS NOTICED DURING THE INSPECTION.

DESCRIPTION: THIS BRUSH GRILLE GUARD MUST BE DESIGNED FOR THE CURRENT YEAR MODEL CHEVY TAHOE SUV.

IT IS TO PROVIDE PROTECTION FOR HEADLIGHTS, GRILLE, HOOD, AND FRONT FENDERS FROM ROAD HAZARDS

WITHOUT JEOPARDIZING THE VEHICLES PERFORMANCE.

COMMENTS

Mounting Brackets Designed To Be Mounted To Strongest Available Points On Vehicle Dependent On Vehicle Make, Model And Year

Must Be Wrap Around Style To Completely Protect The Headlight And Turn Signal Assembly With Contoured Uprights To Match Specific Year Model Vehicle Line And Aerodynamics

Must Provide Grille Protection With A Minimum 3/4-# 9 Expanded Metal

Must Have A Black Powder Coat Finish Applied In A Consistent Thickness .003 To .005 Mill.

ITEM: AUT9516-22 HEAVY-DUTY BRUSH GRILL GUARD

1 ) Will Be Vehicle And Year Specific: PASS/FAIL

2 ) PASS/FAIL

6 ) PASS/FAIL

7 ) PASS/FAIL

8 ) Must Not Obstruct OEM Lighting PASS/FAIL 9 ) Must Utilize Existing OEM Tow Hooks If Equipped PASS/FAIL

13 ) PASS/FAIL

14 ) PASS/FAIL

15 ) Must Include All Grade 5 Or Better Mounting Hardware PASS/FAIL

16 ) PASS/FAIL

17 ) PASS/FAIL

18 ) PASS/FAIL

*MUST INCLUDE ALL MOUNTING HARDWARE PASS/FAIL

*MUST INCLUDE ALL INSTALLATION INSTRUCTIONS PASS/FAIL

*MUST NOT INCLUDE ANY TOOLS PASS/FAIL

Designed For Installation Utilizing Existing Mounting Locations With No Drilling Required

BRUSHGUARD MATERIAL CHECKLIST

INSTRUCTIONS: PLEASE INSPECT AND REVIEW THE MATERIAL(S) LISTED BELOW FOR ADHERENCE TO THE MANUFACTURER'S REQUIREMENTS. LIST ANY DISCREPANCIES OR DEFECTS NOTICED DURING THE INSPECTION.

DESCRIPTION: THIS BRUSH GRILLE GUARD MUST BE DESIGNED FOR THE CURRENT YEAR MODEL CHEVY SUBURBAN SUV. IT IS TO PROVIDE PROTECTION FOR HEADLIGHTS, GRILLE, HOOD, AND FRONT FENDERS FROM ROAD HAZARDS

WITHOUT JEOPARDIZING THE VEHICLES PERFORMANCE.

COMMENTS

Mounting Brackets Designed To Be Mounted To Strongest Available Points On Vehicle Dependent On Vehicle Make, Model And Year

Must Be Wrap Around Style To Completely Protect The Headlight And Turn Signal Assembly With Contoured Uprights To Match Specific Year Model Vehicle Line And Aerodynamics

Must Provide Grille Protection With A Minimum 3/4-# 9 Expanded Metal

Must Have A Black Powder Coat Finish Applied In A Consistent Thickness .003 To .005 Mill.

ITEM: AUT3664-22 HEAVY-DUTY BRUSH GRILL GUARD

1 ) Will Be Vehicle And Year Specific: PASS/FAIL

2 ) PASS/FAIL

6 ) PASS/FAIL

7 ) PASS/FAIL

8 ) Must Not Obstruct OEM Lighting PASS/FAIL 9 ) Must Utilize Existing OEM Tow Hooks If Equipped PASS/FAIL

13 ) PASS/FAIL

14 ) PASS/FAIL

15 ) Must Include All Grade 5 Or Better Mounting Hardware PASS/FAIL

16 ) PASS/FAIL

17 ) PASS/FAIL

18 ) PASS/FAIL

*MUST INCLUDE ALL MOUNTING HARDWARE PASS/FAIL

*MUST INCLUDE ALL INSTALLATION INSTRUCTIONS PASS/FAIL

*MUST NOT INCLUDE ANY TOOLS PASS/FAIL

Designed For Installation Utilizing Existing Mounting Locations With No Drilling Required

BRUSHGUARD MATERIAL CHECKLIST

INSTRUCTIONS: PLEASE INSPECT AND REVIEW THE MATERIAL(S) LISTED BELOW FOR ADHERENCE TO THE MANUFACTURER'S REQUIREMENTS. LIST ANY DISCREPANCIES OR DEFECTS NOTICED DURING THE INSPECTION.

DESCRIPTION: THIS BRUSH GRILLE GUARD MUST BE DESIGNED FOR THE CURRENT YEAR MODEL DODGE 1500 PICK- UP TRUCK. IT IS TO PROVIDE PROTECTION FOR HEADLIGHTS, GRILLE, HOOD, AND FRONT FENDERS FROM ROAD

HAZARDS WITHOUT JEOPARDIZING THE VEHICLES PERFORMANCE.

COMMENTS

Mounting Brackets Designed To Be Mounted To Strongest Available Points On Vehicle Dependent On Vehicle Make, Model And Year

Must Be Wrap Around Style To Completely Protect The Headlight And Turn Signal Assembly With Contoured Uprights To Match Specific Year Model Vehicle Line And Aerodynamics

Must Provide Grille Protection With A Minimum 3/4-# 9 Expanded Metal

Must Have A Black Powder Coat Finish Applied In A Consistent Thickness .003 To .005 Mill.

ITEM: AUT9515-22 HEAVY-DUTY BRUSH GRILL GUARD

1 ) Will Be Vehicle And Year Specific: PASS/FAIL

2 ) PASS/FAIL

6 ) PASS/FAIL

7 ) PASS/FAIL

8 ) Must Not Obstruct OEM Lighting PASS/FAIL 9 ) Must Utilize Existing OEM Tow Hooks If Equipped PASS/FAIL

13 ) PASS/FAIL

14 ) PASS/FAIL

15 ) Must Include All Grade 5 Or Better Mounting Hardware PASS/FAIL

16 ) PASS/FAIL

17 ) PASS/FAIL

18 ) PASS/FAIL

*MUST INCLUDE ALL MOUNTING HARDWARE PASS/FAIL

*MUST INCLUDE ALL INSTALLATION INSTRUCTIONS PASS/FAIL

*MUST NOT INCLUDE ANY TOOLS PASS/FAIL

Designed For Installation Utilizing Existing Mounting Locations With No Drilling Required

BRUSHGUARD MATERIAL CHECKLIST

INSTRUCTIONS: PLEASE INSPECT AND REVIEW THE MATERIAL(S) LISTED BELOW FOR ADHERENCE TO THE MANUFACTURER'S REQUIREMENTS. LIST ANY DISCREPANCIES OR DEFECTS NOTICED DURING THE INSPECTION.

DESCRIPTION: THIS BRUSH GRILLE GUARD MUST BE DESIGNED FOR THE CURRENT YEAR MODEL DODGE 2500 PICK- UP TRUCK. IT IS TO PROVIDE PROTECTION FOR HEADLIGHTS, GRILLE, HOOD, AND FRONT FENDERS FROM ROAD

HAZARDS WITHOUT JEOPARDIZING THE VEHICLES PERFORMANCE.

COMMENTS

Mounting Brackets Designed To Be Mounted To Strongest Available Points On Vehicle Dependent On Vehicle Make, Model And Year

Must Be Wrap Around Style To Completely Protect The Headlight And Turn Signal Assembly With Contoured Uprights To Match Specific Year Model Vehicle Line And Aerodynamics

Must Provide Grille Protection With A Minimum 3/4-# 9 Expanded Metal

Must Have A Black Powder Coat Finish Applied In A Consistent Thickness .003 To .005 Mill.

ITEM: AHW1291-22 HEAVY-DUTY BRUSH GRILL GUARD

1 ) Will Be Vehicle And Year Specific: PASS/FAIL

2 ) PASS/FAIL

6 ) PASS/FAIL

7 ) PASS/FAIL

8 ) Must Not Obstruct OEM Lighting PASS/FAIL 9 ) Must Utilize Existing OEM Tow Hooks If Equipped PASS/FAIL

13 ) PASS/FAIL

14 ) PASS/FAIL

15 ) Must Include All Grade 5 Or Better Mounting Hardware PASS/FAIL

16 ) PASS/FAIL

17 ) PASS/FAIL

18 ) PASS/FAIL

*MUST INCLUDE ALL MOUNTING HARDWARE PASS/FAIL

*MUST INCLUDE ALL INSTALLATION INSTRUCTIONS PASS/FAIL

*MUST NOT INCLUDE ANY TOOLS PASS/FAIL

Designed For Installation Utilizing Existing Mounting Locations With No Drilling Required

BRUSHGUARD MATERIAL CHECKLIST

INSTRUCTIONS: PLEASE INSPECT AND REVIEW THE MATERIAL(S) LISTED BELOW FOR ADHERENCE TO THE MANUFACTURER'S REQUIREMENTS. LIST ANY DISCREPANCIES OR DEFECTS NOTICED DURING THE INSPECTION.

DESCRIPTION: THIS BRUSH GRILLE GUARD MUST BE DESIGNED FOR THE CURRENT YEAR MODEL FORD F-150 PICK- UP TRUCK. IT IS TO PROVIDE PROTECTION FOR HEADLIGHTS, GRILLE, HOOD, AND FRONT FENDERS FROM ROAD

HAZARDS WITHOUT JEOPARDIZING THE VEHICLES PERFORMANCE.

COMMENTS

Mounting Brackets Designed To Be Mounted To Strongest Available Points On Vehicle Dependent On Vehicle Make, Model And Year

Must Be Wrap Around Style To Completely Protect The Headlight And Turn Signal Assembly With Contoured Uprights To Match Specific Year Model Vehicle Line And Aerodynamics

Must Provide Grille Protection With A Minimum 3/4-# 9 Expanded Metal

Must Have A Black Powder Coat Finish Applied In A Consistent Thickness .003 To .005 Mill.

ITEM: AUT9511-22 HEAVY-DUTY BRUSH GRILL GUARD

1 ) Will Be Vehicle And Year Specific: PASS/FAIL

2 ) PASS/FAIL

6 ) PASS/FAIL

7 ) PASS/FAIL

8 ) Must Not Obstruct OEM Lighting PASS/FAIL 9 ) Must Utilize Existing OEM Tow Hooks If Equipped PASS/FAIL

13 ) PASS/FAIL

14 ) PASS/FAIL

15 ) Must Include All Grade 5 Or Better Mounting Hardware PASS/FAIL

16 ) PASS/FAIL

17 ) PASS/FAIL

18 ) PASS/FAIL

*MUST INCLUDE ALL MOUNTING HARDWARE PASS/FAIL

*MUST INCLUDE ALL INSTALLATION INSTRUCTIONS PASS/FAIL

*MUST NOT INCLUDE ANY TOOLS PASS/FAIL

Designed For Installation Utilizing Existing Mounting Locations With No Drilling Required

BRUSHGUARD MATERIAL CHECKLIST

INSTRUCTIONS: PLEASE INSPECT AND REVIEW THE MATERIAL(S) LISTED BELOW FOR ADHERENCE TO THE MANUFACTURER'S REQUIREMENTS. LIST ANY DISCREPANCIES OR DEFECTS NOTICED DURING THE INSPECTION.

DESCRIPTION: THIS BRUSH GRILLE GUARD MUST BE DESIGNED FOR THE CURRENT YEAR MODEL FORD F-250-350 PICK-UP TRUCK. IT IS TO PROVIDE PROTECTION FOR HEADLIGHTS, GRILLE, HOOD, AND FRONT FENDERS FROM

ROAD HAZARDS WITHOUT JEOPARDIZING THE VEHICLES PERFORMANCE.

COMMENTS

Mounting Brackets Designed To Be Mounted To Strongest Available Points On Vehicle Dependent On Vehicle Make, Model And Year

Must Be Wrap Around Style To Completely Protect The Headlight And Turn Signal Assembly With Contoured Uprights To Match Specific Year Model Vehicle Line And Aerodynamics

Must Provide Grille Protection With A Minimum 3/4-# 9 Expanded Metal

Must Have A Black Powder Coat Finish Applied In A Consistent Thickness .003 To .005 Mill.

ITEM: AHW0830-22 35"PUSH-BUMPER,WITH MOUNT-FD-INTERCEPTOR

1 ) Measures Thirty-Five (35) Inches From Arm to Arm PASS/FAIL 2 ) Will Be Vehicle And Year Specific PASS/FAIL

3 ) PASS/FAIL

4 )

PASS/FAIL

5 ) Features a Center Shelf Ideal for Mounting Lights and/or Speaker System PASS/FAIL 6 ) Additional Tubular Crossbar(s) for Extra Streght and Durability PASS/FAIL 7 ) Must Allow For Vehicle Original Hood, Wheel And Suspension Travel PASS/FAIL 8 )

PASS/FAIL

9 ) PASS/FAIL

10 ) Must Not Obstruct OEM Lighting PASS/FAIL 11 ) Must Utilize Existing OEM Tow Hooks If Equipped PASS/FAIL 12 ) Meets Automakers Requirements For Front End Weight Limitations PASS/FAIL 13 ) Does Not Interfere With Airbag Supplement Restraint System PASS/FAIL 14 ) Pushing Surface To Consist Of Mar-Resistant Heavy Duty Rubber PASS/FAIL

15 ) PASS/FAIL

16 ) PASS/FAIL

17 ) Must Include All Grade 5 Or Better Mounting Hardware PASS/FAIL

18 ) PASS/FAIL

19 ) PASS/FAIL

20 ) PASS/FAIL

*MUST INCLUDE ALL MOUNTING HARDWARE PASS/FAIL

*MUST INCLUDE ALL INSTALLATION INSTRUCTIONS PASS/FAIL

*MUST NOT INCLUDE ANY TOOLS PASS/FAIL

ADDITIONAL COMMENTS:

Must Have A Black Powder Coat Finish Applied In A Consistent Thickness .003 To .005 Mill.

Mounting Brackets Designed To Be Mounted To Strongest Available Points On Vehicle Dependent On Vehicle Make, Model And Year

Designed For Installation Utilizing Existing Mounting Locations With No Drilling Required May Consist Of Several Pieces That Bolt Together To Include Multiple Supports And Two 3/16 Inch Thick Side Plates

Rubber To Be Mounted To 1/8 Inch Thick Welded Channeling And Secured With Fastening Buttons

Full Assembly will Extend Approximately 9 inch beyond exisiting Factory Bumper.

PUSH BUMPER MATERIAL CHECKLIST

INSTRUCTIONS: PLEASE INSPECT AND REVIEW THE MATERIAL(S) LISTED BELOW FOR ADHERENCE TO THE MANUFACTURER'S REQUIREMENTS. LIST ANY DISCREPANCIES OR DEFECTS NOTICED DURING THE INSPECTION.

DESCRIPTION: THIS 35" PUSH BUMPER WITH MOUNT MUST BE DESIGNED FOR THE CURRENT YEAR MODEL FORD POLICE INTERCEPTOR UTILITY. IT IS TO PROVIDE PROTECTION FOR HEADLIGHTS, GRILLE, HOOD, AND FRONT FENDERS

FROM ROAD HAZARDS WITHOUT JEOPARDIZING THE VEHICLES PERFORMANCE.

COMMENTS

ITEM: AHW8691-22 35"PUSH-BUMPER,WITH MOUNT,CH-TAHOE/SUBURBAN

1 ) Measures Thirty-Five (35) Inches From Arm to Arm PASS/FAIL 2 ) Will Be Vehicle And Year Specific PASS/FAIL

3 ) PASS/FAIL

4 )

PASS/FAIL

9 ) PASS/FAIL

15 ) PASS/FAIL

16 ) PASS/FAIL

17 ) Must Include All Grade 5 Or Better Mounting Hardware PASS/FAIL

18 ) PASS/FAIL

19 ) PASS/FAIL

20 ) PASS/FAIL

*MUST INCLUDE ALL MOUNTING HARDWARE PASS/FAIL

*MUST INCLUDE ALL INSTALLATION INSTRUCTIONS PASS/FAIL

*MUST NOT INCLUDE ANY TOOLS PASS/FAIL

ADDITIONAL COMMENTS:

Must Have A Black Powder Coat Finish Applied In A Consistent Thickness .003 To .005 Mill.

Mounting Brackets Designed To Be Mounted To Strongest Available Points On Vehicle Dependent On Vehicle Make, Model And Year

Rubber To Be Mounted To 1/8 Inch Thick Welded Channeling And Secured With Fastening Buttons

Full Assembly will Extend Approximately 9 inch beyond exisiting Factory Bumper.

PUSH BUMPER MATERIAL CHECKLIST

INSTRUCTIONS: PLEASE INSPECT AND REVIEW THE MATERIAL(S) LISTED BELOW FOR ADHERENCE TO THE MANUFACTURER'S REQUIREMENTS. LIST ANY DISCREPANCIES OR DEFECTS NOTICED DURING THE INSPECTION.

DESCRIPTION: THIS 35" PUSH BUMPER WITH MOUNT MUST BE DESIGNED FOR THE CURRENT YEAR MODEL CHEVY TAHOE/SUBURBAN. IT IS TO PROVIDE PROTECTION FOR HEADLIGHTS, GRILLE, HOOD, AND FRONT FENDERS FROM

ROAD HAZARDS WITHOUT JEOPARDIZING THE VEHICLES PERFORMANCE.

ITEM: AHW3755-22 35"PUSH-BUMPER,WITH MOUNT,DODGE-CHARGER

1 ) Measures Thirty-Five (35) Inches From Arm to Arm PASS/FAIL 2 ) Will Be Vehicle And Year Specific PASS/FAIL

3 ) PASS/FAIL

4 )

PASS/FAIL

9 ) PASS/FAIL

15 ) PASS/FAIL

16 ) PASS/FAIL

17 ) Must Include All Grade 5 Or Better Mounting Hardware PASS/FAIL

18 ) PASS/FAIL

19 ) PASS/FAIL

20 ) PASS/FAIL

*MUST INCLUDE ALL MOUNTING HARDWARE PASS/FAIL

*MUST INCLUDE ALL INSTALLATION INSTRUCTIONS PASS/FAIL

*MUST NOT INCLUDE ANY TOOLS PASS/FAIL

ADDITIONAL COMMENTS:

Must Have A Black Powder Coat Finish Applied In A Consistent Thickness .003 To .005 Mill.

Mounting Brackets Designed To Be Mounted To Strongest Available Points On Vehicle Dependent On Vehicle Make, Model And Year

Rubber To Be Mounted To 1/8 Inch Thick Welded Channeling And Secured With Fastening Buttons

Full Assembly will Extend Approximately 9 inch beyond exisiting Factory Bumper.

PUSH BUMPER MATERIAL CHECKLIST

INSTRUCTIONS: PLEASE INSPECT AND REVIEW THE MATERIAL(S) LISTED BELOW FOR ADHERENCE TO THE MANUFACTURER'S REQUIREMENTS. LIST ANY DISCREPANCIES OR DEFECTS NOTICED DURING THE INSPECTION.

DESCRIPTION: THIS 35" PUSH BUMPER WITH MOUNT MUST BE DESIGNED FOR THE CURRENT YEAR MODEL DODGE CHARGER. IT IS TO PROVIDE PROTECTION FOR HEADLIGHTS, GRILLE, HOOD, AND FRONT FENDERS FROM ROAD

HAZARDS WITHOUT JEOPARDIZING THE VEHICLES PERFORMANCE.

AMENDMENT OF SOLICITATION/ MODIFICATION OF CONTRACT

UPDATED-Brushguards and Push bumpers Material Checklist-Done 4-28-2022.pdf

CHEVY-1500

CHEVY-2500-3500

CH-TAHOE

CH-SUBURBAN

DODGE-1500

DODGE-2500

FD-150

FD-250-350

Interceptor Utility

Tahoe

Charger

File details come from the government source that posted it. Updated Apr 28, 2022.