ENTERPRISE POLE CONSTRUCTED SHOP BUILDING.pdf
PDF 51 KB Posted
- Attached to
- Post constructed shop building
- Solicitation number
- S-63500-00006868
- Issued by
- Umatilla County, Oregon
About this file
The document is a detailed materials list for an ENTERPRISE POLE CONSTRUCTED SHOP BUILDING to be constructed in Union County, Oregon. The materials list includes quantities and specifications for posts, plates, manufactured trusses, girts, purlins, eaves and fascia, ceiling joists and soffit framing, roof and wall sheeting, building insulation, metal roofing and siding, and miscellaneous hardware. This materials list supports a state and local contract opportunity for the purchase and delivery of a 96'x36'x16' post-constructed shop building, which requires all materials needed to complete the "shell" of the building.
The contract opportunity specifies that the bid must include all necessary materials, including PT posts, dimensional lumber, manufactured trusses, metal roofing and siding, insulation, and all other items required to construct the shell of the post-constructed shop building. No additional details are provided regarding pricing, funding sources, set-asides, or incumbent contractors.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ENTERPRISE POLE CONSTRUCTED SHOP BUILDING – MATERIALS LIST
**Posts, #2 btr H-F pole barn stock (green, CCA .60 min)
6 x 8 10/22’
6 x 6 4/22’, 4/26’
4 x 6 14/20’, 2/22’
**PT Plate, 2 x 8 pt plate 10/16’, 8/12’
2 x 6 pt plate 10/16’, 12/12’
** Manufactured trusses
36 ft long, 4/12 pitch, top and bottom chords must be 2x8 minimum and truss webb must include a vertical member at 12’ and 24’, no tails
**Commercial girts, blocking
2 x 6, #2 btr DF 20/20’, 104/16’, 74/14’, 70/12’
2 x 4, #2 btr DF 74/14’
**Purlins, purlin blocks
2 x 8, #2 btr 174/16’, 78/18’, **Eave and Fascia
2 x 8, #1 DF 5/20’, 11/16’
**Ceiling joist, soffit framing
2 x 8, SS DF 216/16’
2 x 4, #2 btr DF 28/20’
**Roof and wall sheeting
4 x 8 x ¾” CDX roof 130 pcs
4 x 8 x 5/8” CDX ext wall 140 pcs
4 x 8 x ½” CCX int ceiling/wall 290 pcs
**Building Insulation
Wall insulation, R-19, kraft backed, 24”. 4000 sq.ft. total
Attic insulation, R-25, Kraft backed, 16” 3456 sq. ft. total
**Metal – 26 ga. painted steel, 36” wide, Tuff Rib pattern
Roof panels 64/19’
Wall panels 4/22’, 4/21’, 4/20’, 4/19’, 4/18’, 4/17’, 46/14’, 18/4’
Soffit panel, 12” wide 192/2’ vented soffit, 80/2’ non-vented soffit
**Metal trims pcs and acc.
Standard ridge 11/10’
Standard eave 22/10’
Fascia trim 32/10’
Gable end 10/10’
Base trim 20/10’
C/J casing 56/10’
Head jamb 12/10’
Door jamb (3x7 custom) 30/10’
Outside corners 8/10’
Woodfast hex head screw, 9 x 1 ½” 10,000 ea.
Stitch screw 14 x ¾” 1, 000 ea.
**Miscellaneous
Roof underlayment 10/4sq. rolls
Tyvex 4/ 9 x 150’ rolls
A-307 bolt 84/ ¾” x 12”
Flat washer 168/ ¾”
Nut 84/ ¾”
Simpson CS-16 strap 8/25’ rolls
Simpson LU28 400 ea.
Simpson A35 100 ea.
20d HDG nail 20#’s
16d HDG nail 1 box
3068 man door 1- RH, 1- LH (Steelcraft L-18 series, F-16 frames, or equal)
File details come from the government source that posted it. Updated .