Engineering_Drawings.pdf

PDF 4 MB Posted Aug 23, 2022

Attached to: Rehab Water System - RI Federal contract opportunity
Solicitation number: 140F0222R0039
Issued by: Department of the Interior Fish and Wildlife Service Region 2

View the file

Other files for this federal contract opportunity

Other files attached to Rehab Water System - RI, newest first.
File	Type	Posted
sachuest_sewer_tie_in_location.jpg	JPG image	Aug 23, 2022
Sachuest_PWS_NSF_Certifications.zip	ZIP file	Aug 23, 2022
Quote_Schedule.pdf	PDF	Aug 23, 2022
Sachuest_dose_effluent_to_VC.jpg	JPG image	Aug 23, 2022
sachuest_water_pipe_from_maint_to_vc_.jpg	JPG image	Aug 23, 2022
Wage_Rates.pdf	PDF	Aug 23, 2022
SOW.pdf	PDF	Aug 23, 2022
Snyder_-Guidelines-for-Use-and-Installation.pdf	PDF	Aug 23, 2022
Sol_140F0222R0039.pdf	PDF	Aug 23, 2022

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

EPOH

FOETATS

DNALSIEDOHR

PROFESSIONAL ENGINEER

REGISTERED

No.

ARTHUR R. CRIPPS, JR.

STR

FXH

ARTHUR R. CRIPPS JR. P.E.

12/20/2021

RMC

CS-01

LEGENDS AND SYMBOLS Sachuest Point National Wildlife RefugeCONCRETE

WOOD PARTITION

UPGRADES TO PUBLIC WATER SYSTEM PWS ID:#RI2980439

CS-01

PFD-01

P&ID-01E

P&ID-01D

P&ID-01N

P&ID-02N

SP-01

M-01

M-02

M-03

769 Sachuest Point Road, Middletown, RI 02842, (401) 619-2680

SITE

PROJECT COVER SHEET

Prepared For:

U.S. Fish & Wildlife Service

50 Bend Road Charlestown, RI 02813

NOTES:

BOARD MOUNTED INSTRUMENT

IN-LINE MOUNTED INSTRUMENT

GATE VALVE

SOLENOID VALVE

SMOOTH NOSE

SAMPLE VALVE

PRESSURE SAFETY VALVE - 3/4"

AIR GAP

PRESSURE GAUGE

PRESSURE SWITCH

PRESSURE TRANSMITTER

FLOW TOTALIZING FLOWMETER

Sachuest Point Public Water System

#RI2980439

769 Sachuest Point Road, Middletown, RI 02842

(401) 619-2680

LOCUS MAP

NO. DRAWING LIST

316 STAINLESS STEEL SCH40

POLYPROPYLENE TUBE

POLYETHYLENE TUBE ENDOPURE PE4710 200 PSI (SODR)

BOW SUPERPEX POTABLE WATER PIPE W/LEAD-FREE CRIMP

JOINING, N.S.F. 61

NYLON REINFORCED POLY TUBING

POLYPROPYLENE PIPE, 200psi

SCH. 80 PVC

BRASS FITTINGS

COPPER

NORMALLY OPEN

NORMALLY CLOSED

FAIL-CLOSE

REDUCING FLANGE

REDUCING BUSHING

INSULATED & ELECTRICALLY TRACED

CONCENTRIC REDUCER

ECCENTRIC REDUCER

FEMALE NAT'L PIPE THREAD

MALE NAT'L PIPE THREAD

XV ON-OFF CONTROL VALVE

LEVEL INDICATOR

INTERLOCK LOGIC FUNCTION

LEVEL ALARM LOW

PUMP-OFF HIGH LEVEL

PUMP-ON LOW LEVEL

BACKFLOW PREVENTER (RPZ)

WATTS #LF009M2QT

S/N: 159676

HYDRO PNEUMATIC TANK

WATER METER

BRASS VALVE WITH MALE HOSE ADAPTER - 3/4"

CHECK VALVE

DOUBLE CHECK VALVE

BALL VALVE - FULL PORT & LEAD FREE

MOTOR ACTUATED VALVE

DIAPHRAGM VALVE

DIAPHRAGM ACTUATED VALVE

STRAINER WITH BLOW-DOWN VALVE

MANUALLY ADJUSTABLE PILOT VALVE

ARTHUR R. CRIPPS, JR. P.E. - RI / MA / CT

200 SHIPPEE PLAT ROAD

COVENTRY, RI 02816

(401) 258-8098 | acrippsjr@gmail.com

EXISTING PIPE

NEW PIPE

INSTRUMENT TUBING-SOFT CU

ELECTRICAL WIRE / CONDUIT

DELINEATION OF LIMITS OF VENDOR-SUPPLIED EQUIPMENT

PIPE UNION CONNECTION

FLANGED CONNECTION

PIPE REDUCER (ECCENTRIC)

CONCENTRIC REDUCER

COUPLING

REDUCING FLANGE/BUSHING

PIPE SPECIFICATION BREAK

CONNECTION FROM EXISTING TO NEW

MALE HOSE CONNECTION

FEMALE HOSE QUICK-DISCONNECT

PROGRAMMABLE LOGIC CONTROLLER (PLC)

INTERFACE-WALL-MOUNTED CONTROL

PANEL & MAN-MACHINE

ANALOG INPUT (TO PLC)

ANALOG OUTPUT (FROM PLC)

DISCRETE INPUT (TO PLC)

DISCRETE OUTPUT (FROM PLC)

PRESSURE TRANSMITTER

LIMIT SWITCH OPEN

LIMIT SWITCH CLOSED

LEVEL LOW

LEVEL HIGH

LEVEL ALARM HIGH

FLOW SWITCH-LOW FLOW

LOW-FLOW ALARM

PRESSURE DIFFERENTIAL-HIGH

LEVEL TRANSMITTER

COVER SHEET

MASS BALANCE & PROCESS FLOW DIAGRAM

PIPING & INSTRUMENT DIAGRAM - EXISTING CONDITIONS

PIPING & INSTRUMENT DIAGRAM - SCOPE OF DEMOLITION WORK

PIPING & INSTRUMENT DIAGRAM - WATER SUPPLY & TREATMENT SYSTEM

PIPING & INSTRUMENT DIAGRAM - WATER STORAGE & DISTRIBUTION SYSTEM

SITE PLAN - NEW SUPPLY LINE TO MAINTENANCE GARAGE & HOLDING TANK SYSTEM

EQUIPMENT ARRANGEMENT & PIPING ELEVATIONS

HOLDING TANK INSTALLATION DETAILS

HOLDING TANK LEVEL CONTROL DETAILS

AUDIO ALARM

BOARD MOUNTED LIMIT SWITCH INDICATOR

HAND-OFF-AUTO SWITCH

PRESURE REGULATING VALVE

ELECTRIC POWER SUPPLY W/ VOLTAGE

BACKFLOW PREVENTER

PILOT LAMP - RED

PILOT LAMP - GREEN

FLOW RESTRICTOR

VARIABLE FREQUENCY DRIVE

MOTOR STARTER / RELAY

VACUUM BREAKER

FILTER

STRAINER

FLEXIBLE HOSE

FLOW RESTRICTING ORIFICE

PROPRIETARY PUMP SAFE-GUARD SYSTEM

VENDOR-SUPPLIED CONTROL PANEL

MOUNTED ON EQUIPMENT

INSULATED PIPE

ELECTRICAL TRACE

TIE-IN POINT

DENOTES LIMITS OF TIE-IN

INTERLOCK RELAY

PANEL MOUNTED INSTRUMENT

BFP

PRV

VFD

ZSL

PUMP

TEC

MNPT

TIE-IN

XX-XX

H-O-A

PVCBR

LAH

PPL

I-ET

PVC

HDPE

ECC.

R.B.

LAL

RED. FLG.

POLY

EXISTING NEW

PEX

RED.

IRFQI

F.C.

PSV

FNPT

316SS

N.C.

FRO

N.O.

LIC

ZSO

ZSC

PDH

FSL

LFA

DWG. NO.:

DATE:

DWG.

APPROVED BY:

PROJ. NO.

REVISIONSREVISIONS

PROJ. NO.

APPROVED BY:

DWG.

DATE:

DRAWN BY:DRAWN BY:

DWG. NO.:

WATER-RIGHT

TWIN

SOFTENERS

IMP-1354TW

103,750 GRAINS

CAPACITY

VOLUME=3.8 CU. FT.

2.5 CU. FT. RESIN 20 GAL BRINE

TREATED WATER TO

VISITOR'S CENTER &

MAINTENANCE GARAGE

TANK SET @

40/60 PSIG

FILL & DRAW

1,771 GAL CAPACITY

HDPE

HOLDING/SURGE TANK

ATMOSPHERIC & VENTED

14'-9"X5'-2"X4'-3"

PEAK USE: 9,936 GAL/YEAR

OFF-PEAK USE: 5,490 GAL/YEAR

TO TIME-DOSED DISPERSAL TO

GROUNDWATER OR VIA LICENSED

WASTE HAULER

31'

STATIC

WATER

LEVEL

ELEV.=8.0'

113,400 GAL/YEAR

3 MONTHS MAXIMUM USE=88,400 GAL

9 MONTHS MINIMUM USE=25,000 GAL

NEUTRALIZER

BACKWASH=8 MIN (64 GAL)

RINSE=1 MIN (8 GAL)

BACKWASH=5 MIN (40 GAL)

RINSE=4 MIN (32 GAL)

TOTAL=144 GAL

1 1 4"

RECHARGE 504 LBS/YEAR

ELEV.=39.3'

31.06 MG/L

RAW WATER DESIGN BASIS

pH=4.9

TOTAL HARDNESS 25 MG/L

IRON=4.4 MG/L

MANGANESE=0.66 MG/L

500# NaCl

CAPACITY

(PER MANUAL CHARGE)

ELEV.=39.0'

PUMP SET

@ 242 FT.

pH=7.0-7.9

ADD 4 GR/GAL HARDNESS @

17.1 MG/L=1GR/GAL

=68 MG/L ADDED HARDNESS

pH=7.0-7.9 TDS=190 MG/L HARDNESS, Fe & Mn=NON-DETECTABLE

OVERFLOW

FLOW RESTRICTOR

1.5 GPM

SOFTENERS

BACKWASH=10 MIN (80 GAL)

DRAW TIME=90 MIN (20 GAL)

RINSE=4 MIN (32 GAL)

TOTAL=132 GAL

FILL BRINE TANK=20 GAL

15,426 GAL/YEAR

BRINE TANK

2'Ø X 3.5'HT

80 GAL

CAPACITY

8"Ø WELL CASING

BERKELEY 3

4 HP / 7GPM TRIMLINE

1900 GALLON

HDPE 942

WATER STORAGE

TANK

5'-4"Ø X 11'-9" S.T.S.

VENTED

ATMOSPHERIC

IN MAINTENANCE

GARAGE

PUMP VIA VARIABLE

SPEED DRIVE

NEUTRALIZER WASTEWATER

PEAK USE=8,640 GAL/YEAR

OFF PEAK USE=3,114 GAL/YEAR

0-16 GPM @ 65 PSI

0-20 GPM @ 52 PSI

TOTAL HARDNESS EQUIVALENT

+Fe & Mn TO BE REMOVED BY RESIN

68+31.06=99.06 (SAY 100 MG/L)

SOFTENER WASTEWATER

PEAK USE=1,296 GAL/YEAR

OFF PEAK USE=2,376 GAL/YEAR

CUSTOM CARE

TWIN

NEUTRALIZERS

C53-BM14-12

VOL.=5.37 CU. FT.

3 CU. FT. MEDIA

500 LINEAR FEET

TO MAINTENANCE GARAGE

EPOH

FOETATS

DNALSIEDOHR

PROFESSIONAL ENGINEER

REGISTERED

No.

ARTHUR R. CRIPPS, JR.

12/12/2021

ARTHUR CRIPPS, JR., P.E.

PFD-01

RMC

#RI2980439

769 Sachuest Point Road, Middletown, RI 02842

(401) 619-2680

ARTHUR R. CRIPPS, JR. P.E. - RI / MA / CT

200 SHIPPEE PLAT ROAD

COVENTRY, RI 02816

(401) 258-8098 | acrippsjr@gmail.com

NOTES:

MASS BALANCE & PROCESS FLOW DIAGRAM

FLOW VOLUMES BASED ON RECORDED

READINGS FROM JULY 1, 2018 TO

OCTOBER 14, 2021.

374,176 GALLONS CONSUMED DURING

1,201 CONTINUOUS DAYS & DOES NOT

INCLUDE THE VOLUMES OF

WASTEWATER.

THE MASS BALANCE REPRESENTS AN

INTERPOLATION OF ANNUAL USE.

THE VOLUMES OF WASTEWATER NOTED

ARE BASED ON THE CALCULATIONS &

ESTIMATES THAT APPEAR IN THIS

REPORT. THE OBJECTIVE OF REDUCING

THE FREQUENCY OF REGENERATION

CYCLE WAS WASTE MINIMIZATION.

Sachuest Point Public Water System

DWG. NO.:

DATE:

REVISIONS

PROJ. NO.PROJ. NO.

DWG.

DATE:

DWG.

REVISIONSDRAWN BY: PREPARED BY: DRAWN BY:

PVC PVC PEX

ES110V110VES ES 110V

PSV

PEX

BERKELEY 3

4 HP MS TRIMLINE (7-9 GPM)

PUMP DEPTH:242 FT

WELL DEPTH: 260 FT

WELL YIELD: 2 GPM

2"X1 1 4"

1 1 4"X1"2"X1 1

2" C

NOTE 1

2"X1 1 4"

EXTERIORGARAGE

EXTERIORMECH.

ROOM

4" DWV PVC

1"X 1 2"

AIR GAP

1"X3 4"

2"X1"

1" P

K W

T O

D R

1/2" AIR HOSE

CONNECTION

1 1

4" PEX BACKWASH TO DRAIN

2"X1"

2" CU

WATER

CONDITIONERS

13" DIAMETER X

5'-3" HEIGHT

EXISTING WELL

ACID

NEUTRALIZER

TANKS

14" DIAMETER X

6'-2" HEIGHT

200R

N.C.

BRINE TANK

MANUAL SALT

MAKEUP

MAIN SUPPLY TO

VISITORS CENTER

1" CU

2" CU

4" CU

2" CU

1" CU

EXISTING DRAIN

SUPPLY TO

GARAGE

BOILER MAKEUP

HOT WATER

HEATER

EPOH

FOETATS

DNALSIEDOHR

PROFESSIONAL ENGINEER

REGISTERED

No.

ARTHUR R. CRIPPS, JR.

REVISED PER RIDOH COMMENTS DATED 06/21/2022

ART CRIPPSRMC

17/2/2022 P&ID-01E

Sachuest Point Public Water System

NOTES:

EXISTING WATER SUPPLY,

TREATMENT & DISTRIBUTION SYSTEMS

DENOTES LIMITS OF EXISTING

TREATMENT EQUIPMENT TO BE

RELOCATED TO THE MAINTENANCE

BUILDING.

ARTHUR R. CRIPPS, JR. P.E. - RI / MA / CT

200 SHIPPEE PLAT ROAD

COVENTRY, RI 02816

(401) 258-8098 | acrippsjr@gmail.com

#RI2980439

769 Sachuest Point Road, Middletown, RI 02842

(401) 619-2680

DWG.

DATE:

DRAWN BY:

DWG.

APPROVED BY:

DWG. NO.:DWG. NO.:

DRAWN BY: APPROVED BY:

PROJ. NO.

REVISIONSREVISIONS

PROJ. NO.DATE:

PSV

ESES 110V110VCU PVC

110V

PEX

PEXPVC ES

1"X 1 2"

2"X1 1 4"

MECH.

ROOM

EXTERIOR

2"X1"

1/2" AIR HOSE

CONNECTION

WATER

CONDITIONERS

13" DIAMETER X

5'-3" HEIGHT

2"X1"

TIE-IN

NOTE 1

2"X1"

1" P

K W

T O

D R

NOTE 3

TIE-IN

AIR GAP

NOTE 1

2" CU

NOTE 2

4" DWV PVC

GARAGE EXTERIOR

1 1

4" PEX BACKWASH TO DRAIN

2"X1 1 4"

1"X3 4"

2" C

EXISTING WELL

2"X1 1 4" 1 1

4"X1"

ACID

NEUTRALIZER

TANKS

14" DIAMETER X

6'-2" HEIGHT

BERKELEY 3

4 HP MS TRIMLINE (7-9 GPM)

PUMP DEPTH:242 FT

WELL DEPTH: 260 FT

WELL YIELD: 2 GPM

N.C.

200R

EXISTING DRAIN

HOT WATER

HEATER

BOILER MAKEUP

SUPPLY TO

GARAGE

1" CU

4" CU

2" CU

1" CU

MAIN SUPPLY TO

VISITORS CENTER

MANUAL SALT

MAKEUP

BRINE TANK

2" CU

EPOH

FOETATS

DNALSIEDOHR

PROFESSIONAL ENGINEER

REGISTERED

No.

ARTHUR R. CRIPPS, JR.

REVISED PER RIDOH COMMENTS DATED 06/21/2022

RMC ART CRIPPS

7/2/2022 1 P&ID-01D

EXISTING WATER SUPPLY SCOPE OF

DEMOLITION WORK FOR THE TREATMENT

& DISTRIBUTION SYSTEMS

LEGEND

EQUIPMENT & PIPING DEPICTED

WITHIN "CLOUDED" AREA TO BE

REMOVED FROM SERVICE.

Sachuest Point Public Water System

#RI2980439

769 Sachuest Point Road, Middletown, RI 02842

(401) 619-2680

ARTHUR R. CRIPPS, JR. P.E. - RI / MA / CT

200 SHIPPEE PLAT ROAD

COVENTRY, RI 02816

(401) 258-8098 | acrippsjr@gmail.com

EXISTING TREATMENT EQUIPMENT DEPICTED

WITHIN DASHED LINES TO BE

RELOCATED TO THE MAINTENANCE GARAGE.

DENOTES LOCATION & LIMITS OF

A TIE-IN POINT

TIE-IN

PROJ. NO.

REVISIONS

DWG. NO.:

DRAWN BY:

DWG.DWG. NO.:

DRAWN BY: APPROVED BY:

PROJ. NO.

REVISIONS

DATE:DATE:

APPROVED BY:

DWG.

PVC PEX *

BFP

FRO

LSH

PSV

FQI

CP* 110V

230V

110V

STR

LHA

PSV

PUMP

TEC ES

P.E.

PVC

1" PVC

SET AT 40/60 PSIG

6"X4" RED.

ELEV.=39.3'

NOTE 1

1 2" P

N.O.N.O.

1-10 GPM

1" P

ACID

NEUTRALIZER

TANKS

14" DIAMETER X

6'-2" HEIGHT

1 4"

P .E

NOTE 8

NOTE 1

4" SCH. 40 PVC.

"P" TRAP

120 VOLT

1 1

2" AIR GAP

MIN.

NOTE 1

SET AT 36.37'

NOTE 3

1 4 " P

NOTE 7

240 LINEAR FEET & PVC

ELECTRICAL CONDUIT

1 1

4" POLYETHYLENE PIPE

4 FT BELOW GRADE

WATER

CONDITIONERS

13" DIAMETER X

5'-3" HEIGHT

N.C. NOTE 9

1" P

K W

T O

D R

EXTERIOR

1 1 4"X1"

1.5 GPM

ELEV.=39.0'

BERKELEY 3

4 HP MS TRIMLINE (7-9 GPM)

PUMP DEPTH:242 FT

WELL DEPTH: 260 FT

WELL YIELD: 2 GPM

1"X 3 4"

EXISTING WELL

1" PVC

1" PEX

T.O.T.=37.6'

1"X 3 4"

FINISH GRADE

N.C.

2" PE

34" > BOTTOM

1 1 4"X1"

ELEV.=38.6'

B.O.T.=33.35'

2"X1 1 4" R.B.

ELEV.=39.3'

OPENING

24" I.D. Ø

1,500 GAL NOMINAL CAPACITY

HDPE TANK (1,771 GAL. MAX.)

2"X1 1 4" R.B.

NOTE 5

PITCH 1

4"/FT

5' MINIMUM

1 1 4"X1"

NOTE 6

INLET

ELEV.=36.93'

4"X1

1 1 4"

(2) 45° ELL'S

NOTE 7

1 1 4"

NOTE 2

1 1 4"

GARAGE EXTERIOR

NOTE 4

FL3Ø

FLEX-LITE FL30

24.2" DIAM. X 57" HT

90 GAL CAPACITY

26.5 GAL

DRAW-DOWN

N.O.

N.C.

1 1

N.O.

0/100#

75#

N.O.

1 4 " P

75#

0/100# 0/100#

P&ID-02N

WATER TO

STORAGE TANK

MANUAL SALT

MAKEUP

(500 LB. CAPACITY)

BRINE TANK

EPOH

FOETATS

DNALSIEDOHR

PROFESSIONAL ENGINEER

REGISTERED

No.

ARTHUR R. CRIPPS, JR.

P&ID-01N

RMC ART CRIPPS

REVISED PER RIDOH COMMENTS DATED 06/21/20227/2/2022

1 PIPING & INSTRUMENT DIAGRAM -

WATER SUPPLY & TREATMENT SYSTEM

P&ID-01D

P&ID-02N

DWG'S M-01, M-02, M-03 & SP-01

#RI2980439

769 Sachuest Point Road, Middletown, RI 02842

(401) 619-2680

ARTHUR R. CRIPPS, JR. P.E. - RI / MA / CT

200 SHIPPEE PLAT ROAD

COVENTRY, RI 02816

(401) 258-8098 | acrippsjr@gmail.com

Sachuest Point Public Water System

NOTES:

REFERENCES:

CORE-DRILL EXISTING CONCRETE TO

WATER LINES & ELECTRICAL

CONDUIT.

DENOTES LIMITS OF RELOCATED

TREATMENT EQUIPMENT.

MOUNT ON PLATFORM ABOVE WELL

SUPPLY LINE.

IN THE EVENT OF LOSS OF WATER,

PUMP TEC SHUTS DOWN WELL PUMP

AUTOMATICALLY RE-SETS IN 30

MINUTES.

BRASS TANK CROSS

3" SCH. 40 PVC VENT, 12"-24" ABOVE

GRADE ELEVATION POINTING DOWN,

WITH 24 MESH NON-CORRODIBLE

INSECT SCREEN. SECURE VENT PIPE

TO WALL.

ADD SAMPLE VALVE.

MANUAL BLOW-DOWN VALVE ON

PIPE STRAINER.

FLOW RESTRICTOR BYPASS,

NORMALLY CLOSED.

DWG.

APPROVED BY:

PROJ. NO.

DWG. NO.:

DRAWN BY:

DATE:

DRAWN BY:

PROJ. NO.

APPROVED BY: REVISIONSREVISIONS

DWG. NO.:

DATE:

PSV

STR

EXISTING

LTLLA

ES 110V

PSV

110V

230V

PSV

EXISTINGNEW

PIC

PVC

HLA

PSV

FILL ON (LL)

SET @ 112" > B.O.T.

1"X 3

4"TIE-IN

2"X1"

LOW LEVEL ALARM (LLA)

SET @ 18" > B.O.T.

INTERIOR

PARTITION

2"X1"

NOTE 8 1"

EXTERIOR

NOTE 1

NOTE 3

EXISTING

HOT

WATER

HEATER

1" CU-I

NOTE 2

1"X1 2"

N.O.

N.C.

N.O.

2"X1 1

4" 1 1

4"X1" 1"

1"X3 4"

DAB ESYBOX

SELF-CONTAINED

VARIABLE-SPEED BOOSTER

PUMP SYSTEM

0-16 GPM @ 65 PSI

0-20 GPM @ 52 PSI

N.O.

PLUG VALVE

NOTE 4

TIE-IN

NOTE 14

2" THREADED PLUG

EXTERIOR

1,900 GALLON

CAPACITY

STORAGE TANK

5'4" DIAMETER X

11'-9" STRAIGHT SIDE

N.C.

NOTE 11

C E

G A R

NOTE 12

N.C.

NOTE 13

S C

E N

R M

O O

NOTE 10

NOTE 6

NOTE 9

NOTE 13

1 1

4" THREADED PLUG

1" CU-I

HIGH LEVEL ALARM (HLA)

SET @ 136" > B.O.T.

FILL OFF (LH)

SET @ 124" > B.O.T.

NOTE 7

18" VENTED MANWAY

INTERIOR

N .O

1" PVC

WATER SUPPLY

P&ID-01N

F.C.

N .O

4 "

#75 HOT WATER

HEATER SUPPLY

WATER SUPPLY TO

VISITORS CENTER

WATER MAKE-UP

TO BOILER

1" CU-I

4" CU-I

2" CU-I

HOT WATER

SUPPLY TO

MAINTENANCE

GARAGE

1" PVC

2"1"

#75

0/100#

#75

EXISTING WATER

SUPPLY IN

MECH. ROOM

2" CU

#75

1" C

U -I

N.C.

PITCH

3" V-PVC

EPOH

FOETATS

DNALSIEDOHR

PROFESSIONAL ENGINEER

REGISTERED

No.

ARTHUR R. CRIPPS, JR.

7/2/2022

RMC

P&ID-02N1 REVISED PER RIDOH COMMENTS DATED 06/21/2022

Sachuest Point Public Water System

P&ID-01N

SITE PLAN SP-01

MECHANICAL DWG M-01

#RI2980439

769 Sachuest Point Road, Middletown, RI 02842

(401) 619-2680

REFERENCES:

ARTHUR R. CRIPPS, JR. P.E. - RI / MA / CT

200 SHIPPEE PLAT ROAD

COVENTRY, RI 02816

(401) 258-8098 | acrippsjr@gmail.com

NOTES:

10.

11.

12.

13.

14.

PIPING & INSTRUMENT DIAGRAM - WATER

STORAGE & DISTRIBUTION SYSTEM

P&ID-01N

DWG M-01

REFERENCES:

REFERENCE P&ID-01D, SCOPE OF

DEMOLITION WORK.

WATER FLOW IS PEVERSED AFTER THE

SCOPE OF WORK DEPICTED IN P&ID-01N

& P&ID-02N IS IMPLEMENTED.

AREA SHOWN WITHIN DASHED LINES

DENOTES LIMITS OF VENDOR SUPPLIED

PUMP SYSTEM.

DENOTES SCOPE OF WORK & LOCATION

OF TIE-IN POINT TO IMPLEMENT NEW

WATER SUPPLY & DISTRIBUTION

SYSTEM. REFERENCE P&ID-01D.

DENOTES LIMITS OF TIE-IN.

TANK FILL CONNECTION WITH 2" S.S.

MALE HOSE CONNECTION.

EXISTING 1

2" AIR BLOWTHROUGH

CONNECTION.

INSTALL 2" SIPHON TUBE W/ PVC

BULKHEAD FITTING & EPDM GASKETS.

EXISTING PSV & PI TO REMAIN IN

SERVICE.

SAMPLE VALVE & HIGH POINT VENT.

TANK BYPASS LOW POINT DRAIN.

STORAGE TANK BYPASS LINE.

INSTALL ISOLATION VALVES ON BYPASS

LINE FITTING-BOUND TO TEE FITTINGS.

INSTALL 3" OVERFLOW VENT, THROUGH

EXTERIOR WALL.

DRAWN BY:

DWG. NO.: DWG.

REVISIONSREVISIONS

PROJ. NO.

APPROVED BY:

DWG.

PROJ. NO.

APPROVED BY:

DATE:

DRAWN BY:

DATE:

TRAIL

WELL LOCATION

240 LF ±

REF. DWG. NO. M-01

CORE-DRILL

FOUNDATION WALL &

FLOOR TO ACCEPT ONE

1 1

4" PE LINES & 1 1

PVC CONDUIT.

REFERENCE DWG. M-01

FFE=39.3'

INSTALL A NEW WATER

SUPPLY LINE FROM

PITLESS ADAPTER TO

MAINTENANCE GARAGE

ELEV.=39.0'

1,500 GALLON

CAPACITY HOLDING

TANK HDPE

ELEV38.6'

GARAGE

INSTALL 11

4" PE LINE & ELECTRICAL

CONDUIT 4' BELOW GRADE

SOLAR ARRAY

SET AT ELEV.=36.37'

1,500 GAL NOMINAL CAPACITY HDPE TANK

(1,771 GAL. MAX.)

14'-9"L X 5'-2"W X 4'-3"HT

I.E.=37.12'

EXTERIORMAINTENANCE

GARAGE

INTERIOR

NOTE 11

I.E.=37.02'

NOTE 12NOTE 13

NOTE 14

5' MINIMUM

PITCH

TOP OF RISER ELEV.=38.85'

4" SCH 40 PVC

E.S.H.W.T.=36.6'

NOTE 1,2 & 3

NOTE 7

FINISH FLOOR ELEV.=39.30'

NOTE 16 & 17NOTE 6 & 10

TOP OF TANK ELEV.=37.60'

FINISH GRADE ELEV.=38.6'

SET BOTTOM AT ELEV.=33.35'

NOTE 5

NOTE 4

PITCH 1

4"/FT

NOTE 9

42" LIQUID LEVEL

NOTE 8

3" SCH 40 PVC

34"

NOTE 6,10 & 15

26" MIN.

" M

. O

8" M

W / N

O V

C C

FINISHED GRADE

" M

12" MIN.

" M

12" MIN.

1-1/4" ENDOPURE 4710

200 PSI (SODR) HDPE

TUBING TO

MAINTENANCE

GARAGE

SEED OR GRAVEL TO

MATCH EXISTING SITE

CONDITIONS

SAND BEDDING

BUNDLE OF PVC

CONDUIT (AS

APPLICABLE)

SAND BEDDING

BANK RUN GRAVEL

OR SUITABLE

BACKFILL MATERIAL

INSTALL 2" MARKING

TAPE (WATER)

INSTALL 2" MARKING

TAPE (ELECTRICAL)

EPOH

FOETATS

DNALSIEDOHR

PROFESSIONAL ENGINEER

REGISTERED

No.

ARTHUR R. CRIPPS, JR.

ARTHUR R. CRIPPS JR.RMC

12/18/2021 SP-01

1500 GALLON ROTH HDPE TANK & ACCESSORIES AVAILABLE FROM ATLANTIC SOLUTIONS LTD, TIVERTON RI, CONTACT: BOB JOHNSON, (401) 293‐0176

INSTALL 1500 GALLON ROTH TANK IN ACCORDANCE WITH (I/A/W) THE CERTIFIED INSTALLERS HANDBOOK.

SET TANK ON A LEVEL, COMPACTED BASE I/A/W MANUFACTURER’S INSTRUCTIONS.

INSTALL TANK BUOYANCY RESTRAINING SYSTEM I/A/W MANUFACTURER’S INSTRUCTIONS.

INSTALL ROTH INLET TANK PLUMBING KIT TB 238‐16.

INSTALL TWO ORENCO FRTA24‐RVF TANK ADAPTERS (TO ACCOMMODATE RISERS).

INSTALL ONE ORENCO RR24 24 INCH DIAMETER X 15 INCH HEIGHT RISER C/W A RLA RISER‐TO‐LID ADAPTER, GASKETTED GREEN FIBERGLASS LID, AND FASTENING HARDWARE.

INSTALL ONE ORENCO RR24 24 INCH DIAMETER X 15 INCH HEIGHT RISER C/W A RLA RISER‐TO‐LID ADAPTER, GASKETTED GREEN FIBERGLASS LID, FASTENING HARDWARE, EXTERNAL SPLICE BOX SBEX1‐4, RRFB FLOAT

SWITCH BRACKET, & G3L PIPE GROMMET.

INSTALL ONE ORENCO FLOAT SWITCH ASSEMBLY (MF) C/W 24 INCH FLOAT STEM, FLOAT COLLAR, ”P” MODEL

FLOAT SWITCH, & (FIELD SET) FLOAT TETHER.

USE BONDING ADHESIVES AS RECOMMENDED BY ORENCO SYSTEMS.

INSTALL ORENCO AMAHW‐120VAC HIGH‐LEVEL ALARM PANEL AT FIVE FEET MINIMUM ABOVE FINISH FLOOR IN

THE MAINTENANCE GARAGE.

INSTALL 3 INCH SCHED 40 PVC TANK VENT ADJACENT TO GARAGE, POINTING DOWN, 18 INCHES MINIMUM

ABOVE GRADE, WITH NON‐CORRODIBLE INSECT SCREEN.

CONNECT 4 INCH TANK DRAIN TO A P‐TRAP FOR TRANSFER OF WASTEWATER FROM THE TREATMENT SYSTEM.

CORE‐DRILL FOUNDATION AND FINISH FLOOR TO INSTALL THE 4 INCH DRAIN PIPE.

INSTALL 3 INCHES MINIMUM ¾” CRUSHED STONE AT CIRCUMFERENCE OF EACH RISER, FROM TOP OF TANK TO

GRADE ELEVATION.

PITCH FINISH GRADE AWAY FROM RISERS.

BACKFILL WITH MINIMUM 6 INCHES OF TOPSOIL AND APPLY HYDROSEED TO DISTURBED AREAS.

Sachuest Point Public Water System

NOTES:

ARTHUR R. CRIPPS, JR. P.E. - RI / MA / CT

200 SHIPPEE PLAT ROAD

COVENTRY, RI 02816

(401) 258-8098 | acrippsjr@gmail.com

#RI2980439

769 Sachuest Point Road, Middletown, RI 02842

(401) 619-2680

10.

11.

12.

13.

14.

15.

16.

17.

REFERENCES:

PARTIAL SITE PLAN - WATER SUPPLY LINE FROM

EXISTING WELL TO MAINTENANCE GARAGE &

HOLDING TANK SYSTEM PROFILE

P&ID-01N

DWG'S M-02 & M-03

OWTS PERMIT #0219-2306

E.S.H.W.T.=24"

POTABLE WATER & ELECTRICAL CONDUIT TRENCH DETAIL

N.T.S.

HOLDING TANK SYSTEM PROFILE

N.T.S.

REVISIONSAPPROVED BY:

DWG.DWG. NO.:

DRAWN BY:

DATE:

DWG. NO.:

DRAWN BY:

DATE: PROJ. NO.

REVISIONS

PROJ. NO.

APPROVED BY:

DWG.

10' 0' 20' 40' 60'5'20'

PARTIAL SITE PLAN

SCALE: 1"=20'

FOETATS

DNALSIEDOHR

PROFESSIONAL ENGINEER

REGISTERED

No.

ARTHUR R. CRIPPS, JR.

7/2/2022 REVISED PER RIDOH COMMENTS DATED 06/21/2022

RMC

M-011

REFERENCES:

NOTES:

EXTEND 3" OVERFLOW PIPE TO EXTERIOR OF

MAINTENANCE GARAGE 12"-24" ABOE GRADE, AND

FITTED WITH A 24 MESH NON-CORRODIBLE SCREEN.

SECURE PIPE TO WALLS.

#RI2980439

769 Sachuest Point Road, Middletown, RI 02842

(401) 619-2680

Sachuest Point Public Water System EQUIPMENT ARRANGEMENT

PLAN, EAST WALL - SECTION A,

& SOUTH WALL - SECTION B

ARTHUR R. CRIPPS, JR. P.E. - RI / MA / CT

200 SHIPPEE PLAT ROAD

COVENTRY, RI 02816

(401) 258-8098 | acrippsjr@gmail.com

P&ID-01N, P&ID-02N, M-02 & M-03

LIST OF EXHIBITS

NOTE 1

NOTE 15'-0"

MIN.

4' -0

16'-0"

1' -6

19'-9"

'-9

2' -0

6' -0

16'-0"

3'MIN.

WORKSHOP

1500 GALLON

HOLDING TANK

GARAGE WORKSHOP PLAN

SCALE: 1"=2'

HIGH LEVEL ALARM PANEL

(MOUNT 5' > FLOOR)

DAB E.SYBOX

BOOSTER PUMP

PITCH

PUMPTEC PANEL

ACID

NEUTRALIZER

TANKSFL30

PRESSURE

TANK

DAB E.SYBOX

BOOSTER PUMP

STRAINER

WATER

CONDITIONERS

RELOCATE FIRE

ALARM BOX

TANK LEVEL

CONTROL PANEL

(MOUNT 5' > FLOOR)

3" V-PVC

TIE-IN POINT

FABRICATED

BASE

4" SCH 40 PVC

BATHROOM

2" MALE QUICK

DISCONNECT

6"X4" REDUCER TO 4"

SCH 40 PVC "P" TRAP

REFER TO P&ID01N

EXISTING HOT

WATER HEATER

INSTALL BOOSTER

PUMP ON FABRICAED

RAISED BASE

BACKFLOW

PREVENTER

HIGH LEVEL ALARM PANEL

(MOUNT 5' > FLOOR)

TANK VENT

4' 4'

6"X4" REDUCER TO 4"

SCH 40 PVC "P" TRAP

REFER TO P&ID01N

BRINE TANK

WATER CONDITIONERS

TANK LEVEL

CONTROL PANEL

(MOUNT 5' > FLOOR)

SITE-FABRICATED

PLATFORM FL30

TANK

EXISTING HOT

WATER HEATER

18" MANWAY

1900 GALLON

STORAGE TANK

BRINE TANK

SOUTH WALL - SECTION B

NTS

2'3'

EAST WALL - SECTION A

NTS

1900 GALLON

STORAGE TANK

EXISTING SINK

18" MANWAY

FL30

PRESSURE

TANK

BACKFLOW

PREVENTER

SITE-FABRICATED

PLATFORM FL30

TANK

PUMPTEC PANEL

WATER

CONDITIONERS

GARAGE

BRINE TANK

ACID

NEUTRALIZER

TANKS

DWG.

APPROVED BY: REVISIONSREVISIONS

PROJ. NO.

APPROVED BY:

DWG.DWG. NO.:

DRAWN BY:

DATE: PROJ. NO.DATE:

DRAWN BY:

14 v.

Technical Data Sheet

Orenco Systems® Inc. , 814 Airway Ave., Sutherlin, OR 97479 USA • 800-348-9843 • 541-459-4449 • www.orenco.com NTD-TA-FRTA-4 Rev. 4.0, © 03/18

FRTA24-RVF Tank Adapters General The FRTA24-RVF adapter provides a wide, ABS interface for install-ing an access riser with a 24-inch (600-mm) nominal diameter. It is designed to create a watertight seal between the tank, adapter, and riser when correctly installed. A bolt-down kit (FRTA24-RBDKIT) con-sisting of stainless steel bolts and butyl tape secures the adapter to the Roth MultiTank.

Standard Models

FRTA24-RVF, FRTA24-RBDKIT

Materials of Construction Adapter ABS

Anchor bolts Stainless steel

Sealant tape Butyl

Specifications Dimension, in. (mm) FRTA24-RVF

A 30 (762)

B 19 (483)

C 23½ (597)

D 311⁄16 (94)

Bolt hole diameter 5⁄16 (8)

Applications Orenco’s FRTA24-RVF tank adapters are used to help create watertight joints between a Roth MultiTank® and a 24-inch (600-mm) access riser.

FRTA24-RVF, top dimensional view

FRTA24-RVF

FRTA24-RVF, side dimensional view

General Onsite Wastewater Products Catalog | Orenco®

PAGE 27ACT-PRD-GOP-1, REV. 2.0 CALL ORENCO SYSTEMS® AT 800-348-9843 • FAX: 541-459-2884

Orenco DuraFiber™ Fiberglass Access Lids

Access Lids and Accessories

DuraFiber™ Fiberglass Access Lids (FLD) Orenco® DuraFiber™ Access Lids provide a secure, damage-resistant covering for ribbed PVC and HDPE risers, pump basins, and access ports.

They are not recommended for vehicular traffi c. Made in the USA.

• Solid, resin-infused fi berglass construction

• Available for 24-inch or 30-inch nominal diameter access risers (600-mm and 750-mm DN)

• 20,000-lb breaking strength (9,000 kg)

• Standard green or brown colors

• Available with or without urethane lid gasket

• Available with carbon fi ltration

• 4 stainless steel fl athead socket cap screws and hex key wrench included

Sample Product Codes*

• FLD24G — fi berglass lid for 24-inch nominal diameter access risers (600-mm DN), with gasket

• FLD30G — fi berglass lid for 30-inch nominal diameter access risers (750-mm DN), with gasket

Custom Fiberglass Logo Lids (FLD) Orenco offers imprinting of custom logos, with customer-supplied images, on quantity orders of 24-inch and 30-inch diameter (600-mm and 750-mm) DuraFiber™ lids.

• Solid, resin-infused fi berglass construction

• 20,000-lb breaking strength (9,000 kg)

• Available with or without lid gasket

Fiberglass Landscape Lids (FLD) In addition to standard green and brown access lids, Orenco offers Land-scape Lids in grass, bark, and river rock patterns for selected DuraFiber™ fi berglass lids.

• DuraFiber lids available in 24-inch size (600-mm)

• Solid, resin-infused fi berglass construction

• Available with or without lid gasket

• Stainless steel fl athead socket cap screws and hex key wrench included

* For the full range of standard options for DuraFiber™ Lids, see the “Product Ordering Information” section in this catalog.

Orenco DuraFiber™ Landscape Lids

Technical Data Sheet

Orenco Systems®, Inc., 814 Airway Ave., Sutherlin, OR 97479 USA • 800-348-9843 • 541-459-4449 • www.orenco.com NTD-RLA-RLA-1 Rev. 3 © 01/20

RLA Riser-to-Lid Adapters Applications Orenco® riser-to-lid adapters (RLAs) provide a secure, watertight method of attaching an Orenco fiberglass lid to a 24-in. or 30-in.

(600- or 750-mm) ribbed PVC access riser.

RLAs are especially useful when the top of the riser is uneven or has a damaged edge.

General RLA adapters can be attached to 24-in. or 30-in. (600- or 750-mm) risers to simplify bolting a lid to the riser. Use a methacrylate adhe-sive to bond RLAs to risers. (See NTD-ADH-1, Orenco®Adhesives and Dispensers, for adhesive recommendations.) The RLA24 has 12 pre-drilled bolt holes. The RLA30 is not predrilled.

For a proper seal, RLA adapters must be used with gasketed access lids. RLA30 adapters are not compatible with Orenco DuraFiber™ FLD30 lids. RLA30 adapters are only compatible with FLDR30 lids.

Standard Models

RLA24, RLA30

Product Code Diagram

Materials of Construction Adapter ABS

Specifications Dimensions, in. (mm) RLA24 RLA30

A – Adapter height 1.25 (32) 1.25 (32)

B – Socket or lip width 1 (25) 1 (25)

C – Inside diameter 22.88 (581) 28.5 (724)

D – Outside diameter 25.5 (648) 31 (787)

E – Socket depth 0.375 (10) N/A

Riser style Perma-Loc™ Perma-Loc Ultra-Rib™ Kor-FLo™

RLA

Riser-to-lid adapter

Adapter diameter, in. (mm):

24 = 24 (600) 30 = 30 (750)

Lid bolt

RLA24

adapter

24-in. (600-mm) riser

Fiberglass lid

RLA24 riser-to-lid adapter

D C

RLA30 riser-to-lid adapter

30-in. (600-mm) riser

Lid bolt

RLA30

adapter

Fiberglass lid

Roth Global Plastics, Inc.

One General Motors Drive Syracuse, NY

(315) 475-0100 Fax (315) 475-0200 www.roth-usa.com

Technical Data Sheet

Access Risers – Ultra-Rib™

General Orenco Ultra-Rib™ Access Risers are constructed of ribbed PVC pipe and are available in 12-in. (300-mm), 18-in. (450-mm), and 24-in.

(600-mm) diameters. They can be ordered in 3-in. (76.2-mm) incre-ments in lengths up to 13 ft (3.96 m) for 12-in. (300-mm) and 18-in.

(450-mm) diameter risers, and up to 14-ft (4.27 m) for 24-in. (600-

mm) diameter risers. Orenco Ultra-Rib riser pipe is also available in truckload quantities. A complete line of Orenco pipe-cutting tools makes it easy to fabricate risers in your shop or in the field.

Standard Models

RR12XX, RU18XX, RR24XX

Product Code Diagram

Applications Orenco’s Access Risers provide access to septic tank openings and can be cast into the tops of concrete tanks, bonded in place, or bolted down using a riser-to-tank adapter. They can also be used as valve enclosures.

Specifications Model RR12XX RU18XX RR24XX

I.D., in. (mm) 11.74 (298) 17.65 (448) 23.50 (597)

Wall thickness – excluding ribs, in. (mm) 0.10 (3) 0.19 (5) 0.25 (6)

O.D. – including ribs, in. (mm) 13.13 (334) 19.44 (494) 25.63 (651)

Weight, lbs/ft (kg/m) 5 (7.4) 11 (16.4) 19 (28.3)

Materials of Construction Ultra-Rib™ PVC Pipe: PVC

R + +

Riser diameter:

12 = 12-in. (300-mm)* 18 = 18-in. (450-mm)* 24 = 24-in. (600-mm)

Riser type code:

R = 12-in. (300-mm) and 24-in. (600-mm) diameters U = 18-in. (450-mm) diameter PU = Bulk Ultra-Rib™ pipe, all diameters

Riser height, 3-in. (76-mm) increments standard

Riser, Ultra-Rib™

* Not intended for use over pump vaults † Minimum riser height 18-in. (457-mm) ‡ For Class I Division 1 environments

Connector/splice box option Blank = No grommet or splice box CLK = Pre-drilled for ClickTight™ S = 1-in. (25-mm) grommet installed L = 1¼-in. (32-mm) grommet installed SX = Pre-drilled for Orenco® external splice box†

S1 = SB1 attached S2 = SB2 attached S3 = SB3 attached S4 = SB4 attached L5 = SB5 attached L6 = SB6 attached SX = Pre-installed hub for external splice box* XS = Explosion-proof splice box for simplex pumps‡

XD = Explosion-proof splice box for duplex pumps‡

XT = Explosion-proof splice box for triplex pumps‡

Discharge assembly or grommet option:

Blank = No discharge grommet HD = Pre-drilled for HDA125 HD2 = Pre-drilled for HDA200 10 = 1-in. (25-mm) 12 = 1¼-in. (32-mm) 15 = 1½-in. (38-mm) 20 = 2-in. (51-mm)

TECHNICAL BULLETIN

Roth Industries / Roth Global Plastics PO Box 245 Syracuse, NY 13211 1.888266.7684 www.roth-usa.com

TB 238-16

Septic Tank Plumbing Kits Product: Roth RMT MultiTank products Date: August 25, 2016

The purpose of this bulletin is to provide necessary details for selection and installation of Tee-baffles for inlet and outlet fittings used in Roth RMT products.

Inlet fitting Due to the geometry of the Roth RMT-500 through RMT-1500 tanks, only a long radius sweep wye fitting may be used on the inlet end of the Roth RMT tank. Roth provides this fitting with all tanks ordered with the plumbing kit option except where regulatory requirements exclude it.

Inlet fitting installation Step one

The sewer pipe installs with a watertight pipe seal (provided with tank) in the inlet end of the tank at the prescribed invert position (A dimple for 40 in LL and B dimple for 42” LL). The sewer pipe must project into the tank to a depth of 5.00 to 5.50 inches. (Fig 1 Dimension A)

Fig 1

Step two Solvent weld the sweep wye inlet fitting to the end of the sewer line such that the vertical stack is just inside the manway ID and the extension is on the bottom of the fitting. (Fig 1)

A A

FOETATS

DNALSIEDOHR

PROFESSIONAL ENGINEER

REGISTERED

No.

ARTHUR R. CRIPPS, JR.

12/12/2021 M-02

RMC ARTHUR R. CRIPPS JR.

HOLDING TANK INSTALLATION DETAILS

ARTHUR R. CRIPPS, JR. P.E. - RI / MA / CT

200 SHIPPEE PLAT ROAD

COVENTRY, RI 02816

(401) 258-8098 | acrippsjr@gmail.com

#RI2980439

769 Sachuest Point Road, Middletown, RI 02842

(401) 619-2680

Sachuest Point Public Water System

PROJ. NO.

DRAWN BY:

DWG. NO.:

DRAWN BY:

DATE:

DWG.

APPROVED BY:

PROJ. NO.

REVISIONSREVISIONS

DWG. NO.:

DATE:

General Onsite Wastewater Products Catalog | Orenco®

PAGE 57ACT-PRD-GOP-1, REV. 2.0 CALL ORENCO SYSTEMS® AT 800-348-9843 • FAX: 541-459-2884

AMAHW Liquid Level Alarm Panel

Alarm Panels

AMAHW Liquid Level Alarm Panel The AMAHW liquid level alarm panel from Orenco Controls® is a 120-VAC, stand-alone alarm panel with an automatic alarm reset function. It has a watertight enclosure rated for indoor or outdoor use. The AMAHW can be used as a remote alarm panel when supplied with a 120-VAC signal from a primary control panel.

• 120-VAC

• 7⁄8-in (22-mm) red visible alarm

• 95 dB audible alarm

• Automatic alarm reset

• Type 4X (IP 66) rated enclosure

• Indoor or outdoor use

• Signal-rated fl oat switch ordered separately

Product Code

• AMAHW — 120 VAC liquid level alarm panel, indoor/outdoor use, automatic alarm reset

AMLAHW Liquid Level Alarm Panel The AMLAHW liquid level alarm panel from Orenco Controls® is a 120-VAC, stand-alone alarm panel with a two-position toggle switch for silencing the audible alarm during alarm conditions. It has a watertight enclosure rated for indoor or outdoor use. The AMLAHW can be used as a remote alarm panel when supplied with a 120-VAC signal from a primary control panel.

• 120-VAC

• 7⁄8-in (22-mm) red alarm light

• 95 dB audible alarm

• “Auto/Silence” 2-position booted toggle switch

• Type 4X (IP 66) rated enclosure

• Indoor or outdoor use

• Signal-rated fl oat switch ordered separately

Product Code

• AMLAHW — 120 VAC liquid level alarm panel, indoor/outdoor use, two-position manual alarm silence switch

AMLAHW Liquid Level Alarm Panel

Orenco Systems® Inc. , 814 Airway Ave., Sutherlin, OR 97479 USA • 800-348-9843 • 541-459-4449 • www.orenco.com NTD-RLA-PG-1 Rev. 2.0, © 03/17

Pipe Grommets Technical Data Sheet

Specifications Model G05L G07L G1L G125L G150L G2L G3L G4L G6L

OD, in. (mm) 1 ¼ (30) 1 ½ (38) 1 7⁄8 (48) 2 1⁄8 (54) 2 ½ (64) 3 7⁄8 (98) 5 (127) 6 (152) 8 1⁄8 (210)

ID, in. (mm) ¾ (19) 1 (25) 1 ¼ (30) 1 ½ (38) 1 ¾ (44) 2 1⁄8 (54) 3 ¼ (83) 4 3⁄16 (106) 6 11⁄16 (170)

GD, in. (mm) 1 (25) 1 ¼ (30) 1 5⁄8 (41) 1 ¾ (44) 2 1⁄8 (54) 2 11⁄16 (68) 3 13⁄16 (97) 4 15⁄16 (125) 7 5⁄8 (193)

GW, in. (mm) 3⁄16 (5) 3⁄16 (5) ¼ (6) ¼ (6) ¼ (6) 5⁄16 (8) 5⁄16 (8) ¼ (6) ¼ (6)

T, in. (mm) ½ (13) 7⁄16 (11) 9⁄16 (14) 5⁄16 (8) 5⁄16 (8) 15⁄16 (24) 15⁄16 (24) 7⁄8 (22) 13⁄16 (21)

Holesaw size, in. (mm) 1 (25) 1 ¼ (30) 1 9⁄16 (40) 1 ¾ (44) 2 1⁄8 (54) 2 ¾ (70) 3 7⁄8 (98) 5 (127) 7 (178)

Applications Orenco® Pipe Grommets are used to provide a seal to prevent the passage of liquids through pipe penetrations.

ODID

General Orenco Pipe Grommets are constructed of corrosion-resistant rubber to provide long-lasting seals. Grommets conform to standard IPS sizes.

Not all models conform exactly to the image shown.

Standard Models G05L, G07L, G1L, G125L, G150L, G2L, G3L, G4L, G6L

Product Code Diagram

Material of Construction:

Grommet EPDM synthetic rubber in accordance with MIL-STD-417, 60 durometer.

G L

Loose (uninstalled)

Grommet

Grommet diameter:

05 = ½-in. (15-mm) 07 = ¾-in. (20-mm) 1 = 1-in. (25-mm) 125 = 1¼-in. (32-mm) 150 = 1½-in (40-mm) 2 = 2-in. (50-mm) 3 = 3-in. (80-mm) 4 = 4-in. (100-mm) 6 = 6-in. (150-mm)

Orenco® | General Onsite Wastewater Products Catalog

PAGE 48 FOR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM ACT-PRD-GOP-1, REV. 2.0

RRFB Float Bracket

Float Switches, Assemblies, and Accessories

Float Brackets (PBFB, RRFB) Orenco® Float Brackets are installed on the inside of a PVC access riser for mounting a fl oat stem and fl oat switches. Two models are available.

• PBFB model adhesive-mounts close to riser wall

• RRFB model bolts into riser wall for offset mount so stem aligns to tank opening

• Accepts 1-inch NPS (25-mm DN) fl oat switch stem

• Ideal for system upgrades and repairs

Product Codes

• PBFB — adhesive-mount fl oat bracket; includes set screw, adhesive ordered separately

• RRFB — bolt-on fl oat bracket; includes mounting hardware and wrench

* For the full range of available product options, contact your local Orenco Distributor or Orenco.

Technical Data Sheet

Orenco Systems® Inc. , 814 Airway Ave., Sutherlin, OR 97479 USA • 800-348-9843 • 541-459-4449 • www.orenco.com NTD-MF-MF-1 Rev. 5.0, © 09/19

Float Switch Assemblies

Materials of Construction Float housing Impact-resistant, noncorrosive polypropylene for use in liquids up to 140˚ F (60˚ C)

Float cord Flexible, 2-conductor (UL, CSA) SJOW; CPE cord jacket with EPDM insulated conductors

Float collar ABS

Applications Float switches are used to signal liquid level positions for alarm and pump control applications. Orenco float switch assemblies can be mounted in pump vaults, effluent screens, pump basins, and risers.

General All models listed are UL listed and CSA certified for use in water or sew-age. Non-mercury float switches (models B, C, N, and P) are used where components containing mercury are prohibited.

Float switches are typically ordered in assemblies that include one or more switches mounted on a 1-inch PVC float stem. ABS float collars are used to provide secure mounting that is easily adjustable.

Normally-open “P” float switches have a blue cap for easy identifica-tion; normally-closed “N” float switches have a red cap.

Standard Models B, C, G, N, P

Product Code Diagram

Note:

When ordering float switch assemblies, remember to list float switches from the top of the float stem down. An “MFPBN-” product code indi-cates one “P” switch at the top of the stem, one “B” in the middle of the stem, and one “N” switch at the bottom of the stem; an “MF2PN-” indicates “P” switches at the top and middle of the stem, and one “N” switch at the bottom of the stem.

The “On” and “Off” positions describe normally open floats.

For normally closed floats, the functions are reversed.

Off

Float collar

Float tether

Set point

Dr aw do w n

Float stem

Cord length option:

Blank = 10 ft (3 m), standard 20 = 20 ft (6 m) 30 = 30 ft (9 m) 50 = 50 ft (15 m)

Number of float switches (when using multiples of the same float switch model):

Blank = no multiples of the same float switch model

Float stem length:

Blank = no float stem (floats and collars only) 19, 21, 27, 33, 37, 39, 45, 51, 57, 66 = stem length, in.

5, 11 = stem length, in. (for elbow-style float brackets)

Application:

FS = field set FTL = elbow-style (base-inlet filters only) PB = pump basin V = pump vault (standard float settings) STEP = Standard float settings for STEP STEPRO = Standard float settings for STEP with redundant off SVCOM = Standard float settings for VCOM simplex

Float switch assembly

Float switch models (listed in order from the top of the float stem down):

B, C, G, N, P

Product Sheet

Distributed By:

Cord grip plugs (3)

Riser adapter

Cord grips (4)

Threaded cap

Conduit hub (2)

Conduit hub plug (1)

External Splice Box Components

Physical Specifications Volume of junction box 126 in.3 (2065 cm3) Cord grips 4 Cord grip plugs 3 Cord diameters 0.170-0.470 in.

accommodated (4.3-11.9 mm) Conduit hubs 2 Conduit hub plug 1 Conduit sizes accommodated ½ in. (with fitting or bell end)

¾ in.

1 in. (with coupling)

Diameter of hole into riser 5 in. (127 mm); hole-cutting template provided

Materials of Construction Splice box PVC Cord grip Nylon Cord grip plugs EPDM rubber O-rings Buna rubber Conduit hub plug PVC Riser adapter ABS

Model Code for Ordering External Splice Box

SBEX1-4 -

External splice box

Blank = no divider plates P = divider plates

Orenco® | General Onsite Wastewater Products Catalog

PAGE 44 FOR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM ACT-PRD-GOP-1, REV. 2.0

Float Switches, Assemblies, and Accessories

“P” Model Float Switch

Signal-Rated, Mechanical (Non-Mercury) Float Switches, “P”, “N” Models Orenco® Signal-Rated Non-Mercury Float Switches are used with pump control panels and alarms in areas where components containing mercury are prohibited. They’re intended for low-amperage signals and aren’t capable of carrying the current necessary to start or operate a pump. They have a “drawdown” value — the difference in liquid level between the switch’s activation and deactivation points.

“P” Model

• Normally-open default state (contact is open when fl oat switch is hanging)

• Approved for intrinsically safe relays (very low amperage)

• Suitable for Orenco MVP and VCOM panels

• 2-inch (76-mm) drawdown

• Super Vu-Tron® cords: fl exible 2-conductor (UL, CSA) SJOOW

“N” Model

• Normally closed default state (contact is open when fl oat switch is fl oating)

• Approved for intrinsically safe relays (very low amperage)

• Suitable for electromechanical panels with “RO” option

• 2-inch (76-mm) drawdown

• Super Vu-Tron® cords: fl exible 2-conductor (UL, CSA) SJOOW

General Onsite Wastewater Products Catalog | Orenco®

PAGE 47ACT-PRD-GOP-1, REV. 2.0 CALL ORENCO SYSTEMS® AT 800-348-9843 • FAX: 541-459-2884

Float Switches, Assemblies, and Accessories

Float Switch Assemblies (MF) Orenco® Float Switch Assemblies are preassembled with one or more fl oats secured by fl oat collars mounted on a 1-inch (25-mm) PVC fl oat stem.

• Preassembled

• Easy to adjust in the fi eld with no special tools

• Quick-release clips

Sample Product Codes*

• MFPBN-27V — fl oat switch assembly; one “P” fl oat, one “B” fl oat, and one “N” fl oat; 27-in (686-mm) stem length, for Biotube® pump vault

• MF3P-33V — fl oat switch assembly; three “P” fl oats, 33-inch (838-

mm) stem length, for Biotube pump vault

* For the full range of standard options, see the “Product Ordering Information” section in this catalog.

Float Switch Collars (MFCOLLAR) Orenco® Float Switch Collars are the simplest, most reliable way to attach a fl oat switch to a Schedule 40 PVC fl oat switch stem.

• Secure, non-slip attachment for fl oat switches

• Models for 1-inch to 3-inch (25-mm to 75-mm) Schedule 40 PVC fl oat switch stems

• Durable ABS construction

• No special tools required for mounting or adjusting

• Quick-release clip

• Works with 18/2 and 16/2 AWG cords (MFCOLLAR1) or 16/3 AWG cords (MFCOLLAR1L)

Product Codes

• MFCOLLAR1 — fi ts 1-inch (25-mm) pipe, 18/2 and 16/2 AWG cords for type A, B, C, N, and P fl oat switches

• MFCOLLAR1L — fi ts 1-inch (25-mm) pipe, 16/3 AWG cords, for type D and G fl oat switches

• MFCOLLAR1.25 — adjustable collar for 1-inch to 3-inch (25- to 75-

mm) pipe, 18/2 and 16/2 AWG cords for type A, B, C, N, and P fl oat switches

• MFCOLLAR2 — fi ts 1-inch (25-mm) pipe, short throw to accommo-date bottom fl oat for PV-style pump vaults MFCOLLAR1 Float Collar

Float Switch Assembly Including Three Floats and Float Collars

External Splice Box

Product Sheet

Applications Orenco’s External Splice Box is engineered specifically for pressurized water and wastewater treatment systems and is especially suited for use in locations prone to high groundwater and other wet conditions. It attaches outside the access riser of an underground tank.

To Order Find your nearest Orenco Distributor by calling Orenco at 800-348-9843 or clicking “Distributor Locator” at orenco.com.

Standard Features & Benefits

• Watertight for pro-longed submergence per UL listing (Type 6P)

• Attaches outside of access riser to allow inspection without opening riser lid

• Allows more equip-ment or increased working room in riser, or use of a smaller-diameter riser

• Volume of 126 in.3

(2065 cm3) allows easy wiring access and accommodates multiple wiring configurations

• Bottom entry allows conduit or direct-bury cable to always remain below mini-mum burial depth

• Molded of UV-resistant PVC, suitable for cold weather exposure and outdoor applications

• Includes a riser adapter designed to provide a watertight connection between the splice box and riser

• Includes three cord grip plugs to seal unused cord grips

Attached outside the riser, Orenco’s External Splice Box allows an electrician to access pump wiring without opening the riser lid.

Optional Features & Benefits

• Can be supplied with divider plates that separate the splice box into two compart-ments, with two cord grips and one conduit hub in each compartment

• Allows for two sets of wiring runs (Class I and either Class II or Class III) for high and low voltage; includes a PVC conduit plug for closing off the second conduit hub if not used

The External Splice Box is molded PVC.

It has a UL Type 6P listing for prolonged submergence.

EPOH

FOETATS

DNALSIEDOHR

PROFESSIONAL ENGINEER

REGISTERED

No.

ARTHUR R. CRIPPS, JR.

12/12/2021 M-03

ARTHUR R. CRIPPS JR.RMC

HOLDING TANK LEVEL CONTROL DETAILS#RI2980439

769 Sachuest Point Road, Middletown, RI 02842

(401) 619-2680

Sachuest Point Public Water SystemARTHUR R. CRIPPS, JR. P.E. - RI / MA / CT

200 SHIPPEE PLAT ROAD

COVENTRY, RI 02816

(401) 258-8098 | acrippsjr@gmail.com

DATE:

REVISIONS

PROJ. NO.

APPROVED BY:

DWG.DWG. NO.:

DATE:

DRAWN BY:DRAWN BY:

DWG. NO.:

REVISIONS

PROJ. NO.

Pg1 2

Pg3

pg4

pg5

pg6

Pg7

pg8

Pg9 10

File details come from the government source that posted it. Updated Aug 23, 2022.