Engineering Data Requirements.pdf
PDF 132 KB Posted
- Attached to
- Cylinder
- Solicitation number
- SPRHA4-26-R-1012
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements document (Hill AFB Form 462) prepared for the manufacture of a Servoactuator Assembly for the F-16 horizontal tail/flaperon system. The document, prepared by Bill Garcia of the 416 SCMS/GUEAA office on 30 August 2022, specifies manufacturing instructions and requirements for part number 3833000-23, which carries National Stock Number 1650-01-624-4596WF.
The document establishes critical manufacturing and quality control requirements, including: use of MIL-STD-130 for part marking instead of FPS-3008; prohibition of military specifications and standards substitutions without prior approval from OO-ALC cognizant engineering activity (416 SCMS); and a prohibition on deviations from control drawing specifications without OO-ALC engineering approval. The document identifies part number 3833177-3 (Piston, Mod, System 2) as a Critical Specification Item, with critical characteristics specifying 420 CRES material per QQ-S-763 and heat treatment of RC 49-53 per MIL-H-6875. Additionally, IUID marking must be applied per Parker-Hannifin drawing 3833000. All sources and materials listed on standards, specifications, and drawings are sole-source items; substitutions require prior approval from the cognizant engineering activity.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRHA426R1012 CUI SSI.pdf | ||
| Packaging Statement of Work.pdf | ||
| Special Packaging Instructions -SPI-F01-060-1272.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
SERVOACTUATOR ASSEMBLY, HORIZONTAL TAIL / FLAPERON (F‐16)
2. PART NUMBER:
3833000‐23
3. NATIONAL STOCK NUMBER:
1650‐01‐624‐4596WF
PREPARED BY:
BILL GARCIA
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
30 AUG 2022
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC. WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA
WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY OO‐ALC COGNIZANT ENGINEERING
ACTIVITY (416 SCMS).
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR APPROVAL
BY OO‐ALC ENGINEERING (416 SCMS).
7. USE PART MARKING PER MIL‐STD‐130 IN LIEU OF FPS‐3008.
8. THE FOLLOWING ITEMS IN THE ISA ASSEMBLY ARE CSI:
PART NUMBER 3833177‐3 (PISTON, MOD, SYSTEM 2). CRITICAL CHARACTERISTICS ARE:
MATERIAL: 420 CRES PER QQ‐S‐763
HEAT TREAT: RC 49‐53 PER MIL‐H‐6875
9. MARK IUID PER PARKER-HANNIFIN DRAWING 3833000.
File details come from the government source that posted it. Updated .