ENERGY QAP C16.38-2 FS2 (JUN 2021).pdf

C16.38-2 Fuel Oil, Burner No. 2 S5000 (DLA ENERGY JUN 2021)

NATIONAL STOCK NUMBER PRODUCT NOMENCLATURE DLA ENERGY PRODUCT CODE

9140-00-247-4365 Fuel Oil, Burner No. 2 S5000 FS2

Supplies delivered under this contract shall conform to all Federal, State, and local environmental requirements applicable to the geographic location of the receiving activity on the date of delivery. This includes delivery of fuel and documentation in a manner consistent with existing or future Title V (Clean Air Act) Permits. In the event that a Federal, State, or local environmental requirement is more stringent than a similar requirement in a fuel specification contained in this contract, the Contractor shall deliver product that complies with the more stringent requirement. Product that fails to meet the more stringent environmental requirement will be considered to be a nonconforming supply. All supplies furnished under this contract shall fully meet the requirements of the applicable specification(s) as cited below. In the event that compliance with the more stringent requirement causes the contractor to incur additional costs, the contractor may request an equitable adjustment.

COUNTRY SPECIFICATION/GRADE

UNITED STATES, TERRITORIES and OTHER

LOCATIONS

ASTM D396 – GRADE 2

ITALY STD UNI CTI 6579 – GRADE B

GERMANY DIN 51603-1 – REGULAR HEATING OIL

UNITED KINGDOM BS 2869 – CLASS D

(a) SULFUR REQUIREMENT. The maximum allowable sulfur content for Burner Oil, Grade No. 2 S5000, shall be 0.50 weight percent or per State/local environmental requirements, whichever is more stringent.

(b) BLENDING REQUIREMENT. Blending of various compatible grades of burner oil to produce an intermediate grade is permitted, however, such blending shall be accomplished by mechanical mixing or agitation in a tank, or by in-line blending, prior to loading the product into transport equipment, and the resultant product must meet all the requirements of the grade produced.

(c) DYE REQUIREMENT. Under United States regulations, fuel oil burner Grade No. 2 is required by 40 CFR Part 80 to contain a sufficient amount of the dye Solvent Red 164 so its presence is visually apparent. At or beyond terminal storage tanks, they are required by CFR Part 48 to contain the dye Solvent Red 164 at a concentration spectrally equivalent to 3.9 pounds per thousand barrels of the solid dye standard Solvent Red 26.

Signature

Prepared by:

Quality / Technical Support Office Approval:

Contracting Approval:

Legal Approval:

(Only required for E QAPs)