U.S. Consulate General Cape Town

Date: 4/23/2026

Dear Prospective Quoter:

Subject: Request for Quotations number 19SF2026Q0008

Enclosed is a Request for Quotations (RFQ) for Elevator Maintenance and Repairs. If you would like to submit a quotation, follow the instructions in Section 3 of the solicitation, complete the required portions of the attached document, and submit it to the address shown on the Standard Form 1449 that follows this letter.

The U.S. Government intends to award a contract/purchase order to the responsible company submitting an acceptable offer at the lowest price. We intend to award a contract/purchase order based on initial quotations, without holding discussions, although we may hold discussions with companies in the competitive range if there is a need to do so.

The Embassy intends to conduct a pre-quotation conference at the site, The pre-proposal conference will be held on May 12, 2026, at 10:00 SAST at the US Consulate General Cape Town, 2 Reddam Avenue, Westlake, 7495. Prospective offerors/quoters should contact Fordn@state.gov by May 8, 2026 at 9:00 SAST to arrange entry to the building by providing the full name of each attendee as shown on their identification, identification number, and if parking on U.S. Government premises is required, the vehicle make, model, color, and registration number..

Quotations are due by May 22, 2026 at 17:00 SAST. No quotations will be accepted after this time. Proposals must be in English and incomplete proposals will not be accepted.

Your quotation must be submitted electronically to capetown_quotation@state.gov .It is important to make sure the submission is made in specific size and format; in MS-Word 2007/2010 or MS-Excel 2007/2010 or Adobe Acrobat (pdf) file format. The file size must not exceed 25MB. If the file size should exceed the 25MB, the submission must be made in separate files and attached to separate emails with less than 30MB each.

In order for a quotation to be considered, you must also complete and submit the following:

1. SF-1449

2. Section I, Pricing

3. Section 5 Representations and Certifications

4. Additional information as required in Section 3

5. The Offeror should submit a completed IRS Form W-14, found at www.irs.gov/w14, to ensure compliance with FAR 52.229-11

6. Proof of SAM Registration mailto:Fordn@state.gov mailto:capetown_quotation@state.gov http://www.irs.gov/w14

Offerors shall be registered in the SAM (System for Award Management) database at https://www.sam.gov prior to submittal of their offer/proposal as prescribed under FAR 4.1102.

Failure to be registered at time of proposal submission may deem the offeror’s proposal to be considered non-responsible and no further consideration will be given. Therefore, offerors are highly encouraged to register immediately if they are interested in submitting a response to this requirement.

Sincerely, Kristin Braden Contracting Officer

Enclosure:

https://www.sam.gov/

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER

2. CONTRACT NO.

3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER

5. SOLICITATION NUMBER

19SF2026Q0008

6. SOLICITATION ISSUE DATE

4/23/2026

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

Kristin Braden

b. TELEPHONE NUMBER(No collect calls)

+27217027331

8. OFFER DUE DATE/ LOCAL

TIME

5/22/2026 at 10:00SAST

9. ISSUED BY CODE 10. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE:____ % FOR:

CONTRACTS OFFICE, SMALL BUSINESS WOMEN-OWNED SMALL BUSINESS

U.S Consulate General Cape Town, 2 Reddam Avnue, Tokai, 7945, Cape Town

HUBZONE SMALL

BUSINESS

(WOSB) ELLIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM NAICS:

To be submitted electronically to the Contracting Officer to the following email address:

capetown_quotation@state.gov

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

EDWOSB

8 (A) SIZE STANDARD:

11. DELIVERY FOR FOB DESTINAT-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS 13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

RFQ IFB RFP

15. DELIVER TO CODE 16. ADMINISTERED BY CODE

17a. CONTRACTOR/

OFFERER

CODE FACILITY

CODE

18a. PAYMENT WILL BE MADE BY

American Embassy – Attn Financial Management Office Sainvoice@state.gov

CODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

Elevator Preventative Maintenance services

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA

26. TOTAL AWARD AMOUNT (For Govt. Use Only)

27a.SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA ARE ARE NOT ATTACHED

27b.CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN ____ COPIES TO

ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SET

FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS SUBJECT

TO THE TERMS AND CONDITIONS SPECIFIED HEREIN.

29. AWARD OF CONTRACT: REF. _________________ OFFER DATED ____________.

YOUR OFFER ON SOLICITATION (BLOCK 5), INCLUDING ANY ADDITIONS OR

CHANGES WHICH ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (Type or print)

30c. DATE SIGNED

31b. NAME OF CONTRACTING OFFICER (Type or print)

Kristin Braden 31c. DATE SIGNED mailto:Sainvoice@state.gov

TABLE OF CONTENTS

SECTION 1 - THE SCHEDULE

• SF 1449 cover sheet

• Continuation To SF-1449, RFQ Number 19SF2026Q0008, Prices, Block 23

• Continuation To SF-1449, RFQ Number 19SF2026Q0008, Schedule Of

Supplies/Services, Block 20 Description/Specifications/Work Statement

• Attachment 1 -List of Elevators to be Maintained

• Attachment 2 - List of Tasks to be Performed

SECTION 2 - CONTRACT CLAUSES

• Contract Clauses

• Addendum to Contract Clauses - FAR and DOSAR Clauses not Prescribed in Part 12

SECTION 3 - SOLICITATION PROVISIONS

• Solicitation Provisions

• Addendum to Solicitation Provisions - FAR and DOSAR Provisions not Prescribed in

Part 12

SECTION 4 - EVALUATION FACTORS

• Evaluation Factors

• Addendum to Evaluation Factors - FAR and DOSAR Provisions not Prescribed in

Part 12

SECTION 5 - REPRESENTATIONS AND CERTIFICATIONS

• Offeror Representations and Certifications

• Addendum to Offeror Representations and Certifications - FAR and DOSAR

Provisions not Prescribed in Part 12

SECTION 1 - THE SCHEDULE

CONTINUATION to SF-1449

RFQ NUMBER 19SF2026Q0008

PRICES, BLOCK 23

1.0 DESCRIPTION

The U.S. Consulate General in Cape Town, South Africa requires services to maintain building elevators in safe, reliable and efficient operating condition. The contract type is a firm fixed price contract for routine maintenance services paid at the monthly rate below. These rates include all costs associated with providing elevator maintenance services in accordance with manufacturer’s warranty including materials, labor, insurance (see FAR 52.228-4 and 52.228-5), overhead, profit and VAT (if applicable). The contract will be for a one-year period, with four one-year optional periods of performance.

2.0 PRICING

2.1 VALUE ADDED TAX

VALUE ADDED TAX. Value Added Tax (VAT) is not included in the CLIN rates. Instead, it will be priced as a separate Line Item in the contract and on Invoices. Local law dictates the portion of the contract price that is subject to VAT; this percentage is multiplied only against that portion. It is reflected for each performance period. The portions of the solicitation subject to VAT are:

2.2 Base Year - The Contractor shall provide the services shown below for the base period of the contract, starting on the date stated in the Notice to Proceed and continuing for a period of 12 months. The fixed unit prices, estimated quantities, and ceiling for each category are:

Line Item Description Monthly Price x 12 Months Annual Total

Routine monthly maintenance for all elevators described in Attachment 1 12

2 DBA Insurance N/A Annual

A. Total base year price (excluding vat)

B. Total base year price (including vat)

2.3 Option Year 1 - The Contractor shall provide the services shown below for Option Year 1, starting one year after the date stated in the Notice to Proceed and continuing for a period of 12 months.

x 12 Months Annual Total

Routine monthly maintenance for all elevators described in

A. Total option year one price (excluding vat)

B. Total option year one price (including vat)

2.4 Option Year 2 - The Contractor shall provide the services shown below for Option Year 2, starting two years after the date stated in the Notice to Proceed and continuing for a period of 12 months.

x 12 Months Annual Total

Routine monthly maintenance for all elevators described in

A. Total option year two price (excluding vat)

B. Total option year two price (including vat)

2.5 Option Year 3 - The Contractor shall provide the services shown below for Option Year 3, starting three years after the date stated in the Notice to Proceed and continuing for a period of 12 months.

x 12 Months Annual Total

Routine monthly maintenance for all elevators described in

A. Total option year three price (excluding vat)

B. Total option year three price (including vat)

2.6 Option Year 4 - The Contractor shall provide the services shown below for Option Year 4, starting four years after the date stated in the Notice to Proceed and continuing for a period of 12 months.

x 12 Months Annual Total

Routine monthly maintenance for all elevators described in

A. Total option year four price (excluding vat)

B. Total option year four price (including vat)

Base Year Total

Option Year 1 Total

Option Year 2 Total

Option Year 3 Total

Option Year 4 Total

GRAND TOTAL OF BASE YEAR PLUS ALL OPTION YEARS

3.0 NOTICE TO PROCEED

After contract award and submission of acceptable insurance certificates and copies of all applicable licenses and permits, the Contracting Officer will issue a Notice to Proceed. The Notice to Proceed will establish a date (a minimum of ten (10) days from date of contract award unless the Contractor agrees to an earlier date) on which performance shall start.

CONTINUATION/ADDENDUM TO SF-1449

RFQ Number 19SF2026Q0008

SCHEDULE OF SUPPLIES/SERVICES, BLOCK 20

DESCRIPTION/SPECIFICATION/WORK STATEMENT

1.0 SCOPE OF WORK

The Us Consulate Cape Town requires the Contractor to maintain the elevators identified in Attachment (1) in safe, reliable and efficient operating condition. The Contractor shall provide all necessary managerial, administrative and direct labor personnel, and as well as all necessary transportation, equipment, tools, repair parts, supplies and materials required to perform inspection, maintenance, repair, and component replacement as required to maintain the elevators in accordance with the manufacturer's specifications. Under this contract the Contractor shall provide the following.

A. Provide a full service maintenance agreement written in English. Full service maintenance means that all parts, materials, supplies and labor are included with the exception of repairs made due to acts of force majeure and misuse.

B. Monthly, scheduled maintenance visits which follow the systematic approach defined in the approved maintenance check chart. See PMSC Elevator Maintenance Checklist document.

C. 24 hour call back service. Entrapments or accidents involving vertical transportation equipment are automatically an emergency call back, as is a condition where all units are out of service.

These calls should have a 1 hour maximum response time. Other call backs should carry a maximum response time of 24 hours. This work is inclusive to the contract pricing and is not billable unless caused by acts of force majeure and/or misuse.

D. Labor rates for work that is billable. This includes work not covered by the terms (i.e.

vandalism repairs) and overtime rates .This should include rates for a mechanic/technician and an apprentice/helper.

E. A term that follows the 1+4 option year(s) model and will not automatically renew annually.

Provide pricing for: Base Year & Option Years 1-4, with any applicable escalations.

F. Payment terms are for services rendered and not in advance.

G. Clear and concise qualifications which prove an aptitude for the specific types of equipment.

This should include any specific training the contractor has and other locations with similar equipment. With this, a list of technicians who will visit Post to service the equipment.

H. Included in the price, the contractor will obtain, in a timely fashion, any spare parts required to restore safe operations.

I. An equipment specific maintenance check list that will be filled out during each visit. This document should reflect the specific maintenance requirements for a piece of equipment and is required to be posted in the elevator machine space.

J. A schedule that defines the exact day, each month, maintenance will occur, and the duration of time required. Also, a list of tools being brought on site.

Note: There are rare occurrences when the facility is not able to accept the contractor on the proposed date. During these periods, the Contractor is required to arrange a new, agreed upon date to complete monthly maintenance.

Provisions for testing. The contractor should provide Post with “point of contact” information for a local Qualified Elevator Inspector (QEI) who will witness testing of the equipment. The third-party inspector cannot work for the contractor and should be paid by Post directly. Testing requirements are: Annual “No-Load” Safety Tests and Five Year “Full Load” Safety Tests in accordance with local regulations unless otherwise stated. The contractor shall provide all necessary procedures, labor, testing equipment and test weights.

K. Inclusive to the price will be the following:

a. To supply and replace batteries for the emergency lighting.

b.To maintain the in-car emergency communication device in working order. Note: Exclusive to this, Post will maintain an active phone line to the connection point.

c. To supply and replace any key switches which operate elevator components. Note: Keys are the responsibility of Post.

2.0 HOURS OF PERFORMANCE

The Contractor shall schedule all routine maintenance and repair work during normal building hours which are defined as 07:45 to 17:15 Monday to Thursday and 07:45 to 12:45 Friday, excluding local and bank holidays, unless approved in advance by the Contracting Officer's Representative (COR).

3.0 ACCESS TO GOVERNMENT BUILDINGS AND STANDARDS OF CONDUCT

3.1 General. The Contractor shall designate a representative who shall supervise the Contractor's elevator mechanics and be the Contractor's liaison with the U.S.

Embassy/Consulate. The Contractor's employees shall be on-site only for contractual duties and not for any other business or purposes. Contractor employees shall have access to the elevators' hoistways, lobbies and machine rooms, either with or without security escorts, only with specific permission by either the Contracting Officer or the COR.

3.2 Personnel Security. The Government reserves the right to deny access to U.S owned and U.S.-operated facilities to any individual. The Contractor shall provide the names, biographic data and police clearance on all Contractor personnel who shall be used on this contract prior to their utilization. The Government shall issue identity cards to approved Contractor personnel, each of whom shall display his/her card(s) on the uniform at all times while on Government property, under this contract. These identity cards are the property of the Government. The Contractor shall return all identity cards when the contract is completed, when a Contractor’s employee leaves this contract, or at the request of the Government.

3.3 Standards of Conduct

3.3.1 General. The Contractor shall maintain satisfactory standards of employee competency, conduct, cleanliness, appearance and integrity and shall be responsible for taking such disciplinary action with respect to employees as may be necessary. Each Contractor employee shall adhere to standards of conduct that reflect credit on themselves, their employer, and the United States Government. The Government reserves the right to direct the Contractor to remove an employee from the worksite for failure to comply with the standards of conduct. The

Contractor shall immediately replace such an employee to maintain continuity of services at no additional cost to the Government.

3.3.2 Uniforms and Personal Protective Equipment. Contractor personnel performing work on site shall present a professional appearance and wear appropriate company identification while performing services at the U.S. Consulate. Personnel shall wear suitable work clothing or company uniforms and utilize all required personal protective equipment (PPE) necessary to safely perform elevator maintenance and repair activities. The Contractor shall be responsible for providing all required uniforms, identification, and PPE for its personnel and for maintaining them in safe and serviceable condition. This requirement applies only during periods when contractor personnel are present on site performing work under this contract.

3.3.3 Neglect of duties shall not be condoned. This includes sleeping while on duty, unreasonable delays or failures to carry out assigned tasks, conducting personal affairs during duty hours and refusing to render assistance or cooperate in upholding the integrity of the worksite security.

3.3.4 The Contractor shall not condone disorderly conduct, use of abusive or offensive language, quarreling, and intimidation by words, actions, or fighting. Also included is participation in disruptive activities that interfere with normal and efficient Government operations.

3.3.5 Intoxicants and Narcotics. The Contractor shall not allow its employees while on duty to possess, sell, consume, or be under the influence of intoxicants, drugs or substances which produce similar effects.

3.3.6 Criminal Actions. Contractor employees may be subject to criminal actions as allowed by law in certain circumstances. These circumstances include but are not limited to the following actions: falsification or unlawful concealment, removal, mutilation, or destruction of any official documents or records or concealment of material facts by willful omission from official documents or records; unauthorized use of Government property, theft, vandalism, or immoral conduct; unethical or improper use of official authority or credentials; security violations; organizing or participating in gambling in any form; and misuse of weapons.

3.3.7 Key Control. The Contractor shall receive, secure, issue and account for any keys issued for access to buildings, offices, equipment, gates, or other areas, for the purposes of this contract.

Keys shall not be duplicated without the COR's approval. Where the Government determines that the Contractor or its agents have duplicated a key without permission of the COR, the Contractor shall remove the individual(s) responsible from performing work under the contract.

If the Contractor has lost any such keys, the Contractor shall immediately notify the COR. In either event, the Contractor shall reimburse the Government for the cost of rekeying that portion of the system so compromised.

4.0 WORK REQUIREMENTS

4.1 General. The Contractor shall provide full service to meet routine maintenance requirements. The Contractor shall maintain elevators so that the elevators are in a safe and efficient operating condition at all times. In the event of a break down, the Contractor shall make every effort to immediately return the elevator to an operating condition.

4.2 Summary of Services - Traction and Winding Drum Elevators

To maintain the designated "Traction" type elevators, (including geared, gearless, DC drive and AC drive machines), and "Winding Drum" type elevators in accordance with the manufacturer's specifications, the Contractor shall perform all of the following services:

Examine, clean, lubricate, adjust, repair, and replace:

elevator machines, motor generators, solid state drives, controllers, selectors, dispatcher & relay panels and parts thereof, including:

hoisting motors, selector motors, worms & gears, bearings, rotating elements, brake magnet coils, brushes and commutators, brake shoes, brake linings & pins, windings & coils, contacts & relays, resistors & transformers, and solid state devices;

keep guide rails properly lubricated except where roller guides are used;

repair or replace guide shoe gibs or rollers;

replace inoperative position indicator and car/hall call lamps;

repair or replace control cables;

examine clean, lubricate, adjust, repair or replace the safety devices including interlocks, door closers, buffers, overspend governors, car & counterweight safeties, limit switches, landing & slowdown switches, door protective devices and alarm bells;

replace wire ropes and equalize the tension of the hoisting ropes;

examine, evaluate, and when needed, regroove or replace all sheaves and sheave assemblies, including drive sheaves, governor tension sheaves and compensating sheaves;

examine, lubricate, adjust, repair and replace car & corridor operating stations, car & corridor hangers & tracks, door operating devices, door gibs and car fans;

clean elevator machine rooms, hatch equipment, rails, inductors, relaying devices, switches, buffers, and car tops;

dismantle, clean, examine, replace worn parts, lubricate, reassemble, and adjust brake plunger assemblies;

refasten/resocket the hoisting ropes, using the babbitt socketing method procedure, on an annual basis for winding drum machines located over the hoistway or on a 2-year basis for machines located below or at the side of a hoistway.

provide "emergency service" assistance defined in 6.2 to correct major elevator problems occurring after normal working hours.

5.0 SCHEDULED ROUTINE MAINTENANCE

5.1 General

5.1.1 The objective of scheduled routine maintenance is to eliminate or minimize elevator malfunction, breakdown and deterioration. Contract maintenance of the elevator must assure continuous, safe, and satisfactory operation of all elevators, their parts and components. The Contractor shall schedule routine maintenance to include all tasks herein described, in addition to routine lubrication and adjustments.

5.1.2. Elevator equipment shall include, but is not limited to: controllers, selectors, worm gears, thrust bearings, brake magnet coils, brake shoes, brushes, windings, commutators, rotating elements, contacts, coils, resistors for operating and motor circuits, magnet frames, cams, car door and hoistway door hangers, tracks and guides, door operating devices, interlocks and contacts, pushbuttons, pumps, pump motors, operating valves, electronic tubes, electronic programmable controllers, hall lanterns and indicators, hatch lighting, pit bulbs, bulb replacement and all other elevator signal accessories.

5.1.3 The Contractor shall inventory, supply, repair and replace all parts that have become unsafe due to wear and tear. The Contractor shall use genuine manufacturer’s parts or approved or equal (to be approved by COR) for all replacements. The Contractor shall maintain an easily accessible supply of spare parts sufficient for normal maintenance and expedient emergency repairs.

5.2 Checklist Approval - The Contractor shall submit to the COR a schedule and description of the scheduled routine maintenance tasks which the Contractor plans to provide. The Contractor shall prepare this schedule and task description in a checklist format similar to the one provided in Attachment 2. The Contracting Officer or COR must approve the proposed "Scheduled Routine Maintenance Task Checklist" prior to contract work commencement.

5.3 Minimum Requirements - The Contractor shall provide a trained mechanic to inspect and service every elevator a minimum of 1 month, every month of the year. The elevator mechanic shall sign off on every item of the checklist. The elevator mechanic shall leave a copy of this signed checklist with the COR or the COR's designate following that month’s routine maintenance visit. This monthly inspection and servicing shall include, but not be limited to, the following tasks:

Ride all cars to detect and repair any improper operation of the car doors, hoistway doors, acceleration, leveling accuracy on the floor stops, and the action of the machine brake;

Check and make necessary repairs to assure proper operation of retractable doors;

Review elevator’s performance with the COR, or the designated representative, to determine if any malfunctions have occurred in connection with the operation of the cars since the most recent previous scheduled routine maintenance visit;

Investigate any malfunctions which have occurred, devoting special attention to any problem involving unsafe operations, and make repairs as necessary;

Examine car stations and call buttons and replace any damaged switches, burned out lamps, bulbs and broken buttons, defective fixtures, switches, covers, and related hardware;

Trouble shoot any failure to equipment, lighting and receptacle electrical circuits;

Report findings to the COR or the COR's designee including identification of failed equipment and reason for failure;

Leave signed and dated copy of the Maintenance Checklist and also leave signed and dated copies of any other monthly, quarterly or annual checklists if those were completed during the subject visit;

Maintain emergency light units in operable condition.

6.0 TROUBLE CALL RESPONSE SERVICE

6.1 General. The Contractor shall provide "around-the-clock" service coverage for elevator trouble calls as described below and which are not excluded by paragraph 8.0 below.

6.2 Emergency Response Service - The Contractor shall provide, at no extra cost, a 24 hours/day, 7 days/week, 52 weeks/year coverage for emergency trouble calls. A trained mechanic shall be "on call" and shall be on site within a one-hour time period of the placement of an emergency trouble call by the Contracting Officer or COR. Emergency situations include people trapped in an elevator car, the suspicion/confirmation of a fire in or around elevator equipment, or an inoperative elevator with no suitable backup.

6.3 Non-Emergency Response Service - The Contractor shall provide, at no extra cost, a non-emergency response service. A trained elevator mechanic will be on site, within one working day, to trouble shoot and repair an elevator malfunction.

6.4 Callback Service - When an elevator which was previously worked on by the Contractor's mechanic, has a repeat malfunction within a 24-hour period, the Contractor shall be obligated to provide, at no extra cost, a return visit by a trained elevator mechanic to correct the problem, even if the problem is minor in nature. The elevator mechanic shall respond to this callback within a three-hour time period regardless of what time the Contracting Officer or COR made the callback complaint, including the "after hours" time periods.

7.0 PERSONNEL, TOOLS, REPAIR PARTS, MATERIALS AND SUPPLIES

The Contractor shall provide trained elevator mechanics with the appropriate tools and testing equipment for scheduled maintenance, unscheduled repairs, emergency repairs/assistance, safety inspection, and safety testing as required by this contract. The Contractor shall provide all of the necessary repair parts, materials and supplies to maintain, service, inspect and test the elevators as required by this contract.

8.0 EXCLUSIONS

The Contractor shall not assume responsibility for the following items of elevator equipment, which are not included in this contract:

Car enclosures and related items including, but not limited to, fixed or removable panels, door panels, car gates, plenum chambers, hung ceilings, light diffusers, fluorescent tubes, dry cell batteries, handrails, mirrors, floor coverings, carpets and other architectural features and accessories;

Buried caissons, cylinders and piping, and power supply feeder circuits to the machine room circuit breakers;

Computer and microprocessor devices not exclusively dedicated to the elevator equipment such as terminal keyboards and display units;

Communications equipment, such as telephones, intercoms, heat detectors, and smoke sensors, which were not installed by the Contractor or the original elevator installer;

Major Repairs: Any individual unit or incident of repair with a total estimated cost (labor and direct material costs) exceeding $15,000.00 which is not covered under routine maintenance, is not covered by this contract. The Government reserves the right to determine how these repairs are to be handled. Such repairs will normally be accomplished by separate purchase order or contract. This exclusion does not apply if the repair is to correct damage caused by Contractor negligence.

INSURANCE REQUIREMENTS

9.1 Personal Injury, Property Loss or Damage (Liability). The Contractor assumes absolute responsibility and liability for any and all personal injuries or death and property damage or losses suffered due to negligence of the Contractor's personnel in the performance of this contract

The Contractor's assumption of absolute liability is independent of any insurance policies.

Insurance. The Contractor, at its own expense, shall provide and maintain during the entire period of performance of this contract, whatever insurance is legally necessary. The Contractor shall carry the following minimum insurance:

Comprehensive General Liability

Bodily Injury ZAR 5,000,000 per occurrence Property Damage ZAR 5,000,000 per occurrence

Workers’ Compensation and Employer’s Liability

Workers’ Compensation and Occupational Disease Statutory, as required by host country law

Employer’s Liability ZAR 10,000,000 per occurrence

9.3 Worker's Compensation Insurance. The Contractor agrees to provide all employees with worker's compensation benefits as required by the laws of either the country in which the employees are working or the employee's native country, whichever offers greater benefits, following FAR 52.228-4 “Worker’s Compensation and War-Hazard Insurance Overseas”.

10.0 PERMITS

The Contractor shall maintain in full force and affect all permits, licenses, and appointments required for the prosecution of work under this contract at no additional cost to the Government.

The Contractor shall obtain these permits, licenses, and appointments in compliance with host country laws.

11.0 LOCAL LAW REGISTRATION

If the local law or decree requires that one or both parties to the contract register the contract with the designated authorities to insure compliance with this law or decree, the entire burden of this registration shall rest upon the Contractor. Any local or other taxes which may be assessed against the contract shall be payable by the Contractor without Government reimbursement.

12.0 QUALITY ASSURANCE AND SURVEILLANCE PLAN (QASP)

12.1 This plan provides an effective method to promote satisfactory contractor performance.

The QASP provides a method for the Contracting Officer's Representative (COR) to monitor Contractor performance, advise the Contractor of unsatisfactory performance, and notify the Contracting Officer of continued unsatisfactory performance. The Contractor, not the

Government, is responsible for management and quality control to meet the terms of the contract.

The role of the Government is to monitor quality to ensure that contract standards are achieved.

Performance Objective Scope of Work Para Performance Threshold Services.

Performs all Elevator Maintenance and repair services set forth in the scope of work.

1. thru 12.4.5 and the subsequent Attachments

All required services are performed and no more than one

(1) customer complaint is received per month.

12.2 Surveillance. The COR will receive and document all complaints from Government personnel regarding the services provided. If appropriate, the COR will send the complaints to the Contractor for corrective action.

12.3 Standard. The performance standard is that the Government receives no more than one (1) customer complaint per month. The COR shall notify the Contracting Officer of the complaints so that the Contracting Officer may take appropriate action to enforce the inspection clause (FAR 52.212-4, Contract Terms and Conditions-Commercial Items), if any of the services exceed the standard.

12.4. Procedures.

12.4.1 If any Government personnel observe unacceptable services, either incomplete work or required services not being performed they should immediately contact the COR.

12.4.2 The COR will complete appropriate documentation to record the complaint.

12.4.3 If the COR determines the complaint is invalid, the COR will advise the complainant.

The COR will retain the annotated copy of the written complaint for his/her files.

12.4.4 If the COR determines the complaint is valid, the COR will inform the Contractor and give the Contractor additional time to correct the defect, if additional time is available. The COR shall determine how much time is reasonable.

12.4.5 The COR shall, as a minimum, orally notify the Contractor of any valid complaints.

13.4.6 If the Contractor disagrees with the complaint after investigation of the site and challenges the validity of the complaint, the Contractor will notify the COR. The COR will review the matter to determine the validity of the complaint.

12.4.7 The COR will consider complaints as resolved unless notified otherwise by the complainant.

12.4.8 Repeat customer complaints are not permitted for any services. If a repeat customer complaint is received for the same deficiency during the service period, the COR will contact the Contracting Officer for appropriate action under the Inspection clause.

ATTACHMENT 1

LIST OF ELEVATORS TO BE SERVICED

Elevator A specification

1. Rope and Lifting System Details:

Rope Manufacturer Information

• Manufacturer: Gustav Wolf

• Origin: Imported

• Date of Manufacture: 17 December 2003

• Date Installed: 10 August 2005

• Certificate Number: 8034260

• Place of Test: Certex, Finland (Hyvinkää)

• Test Date: 12 August 2005

Rope Specifications

• Coil Number: 8038060

• Number of Ropes: 6

• Length (each): 43 m

• Diameter: 13 mm

• Mass per Meter: 0.24 kg/m

• Total Rope Mass: 61.92 kg

Construction Details

• Lay: Ordinary Right-Hand

• Strands: 8

• Wires per Strand: 19 (9/9/1)

• Wire Diameter: 0.4 mm

• Core Type: Fibre Core with Steel Center Wire

• Steel Class: NF19 S-FE

• Tensile Grade: 1570 N/mm²

• Lubrication: Specially Lubricated

Load and Performance Data

• Mass of Elevator Car: 758 kg

• Maximum Load Capacity: 1600 kg

• Total System Mass: 2419.9 kg

Roping Configuration

• Method of Roping: 2:1

Safety Factors

• Factor of Safety (per rope): 2.99

• Aggregated Factor of Safety: 17.95

2. Equipment Particulars:

General Information

• Location: Consulate Compound, Redam Road, Steenberg, Cape Town

• Owner: U.S. Government (as above)

• User: U.S. Consulate Cape Town

• Manufacturer: KONE

• Manufacturer ID: 40177712

• Official ID: 08/L 2834

• Date of Construction: 2006

• Service Company: KONE

Elevator Type and Configuration

• Type: Passenger Elevator

• Drive Type: Traction

• Roping Method: 2:1

• Machinery Location: Shaft (Machine Room-Less)

• Control System: LCE / V3 vvf3.18

Capacity and Performance

• Rated Load: 1600 kg

• Maximum Number of Persons: 21

• Rated Speed: 1.0 m/s

• Travel Distance: 13,250 mm

• Number of Landings: 4

• Number of Entrances: 1

• Car Floor Area: 4 m²

Mechanical and Electrical Characteristics

• Sheave Diameter: 600 mm

• Motor Type: Synchronous

• Motor Power: 11.2 kW

• Power Supply: AC, 380 V

Weight and Load Data

• Mass of Car: 758 kg

• Counterweight: 2,493 kg

• Maximum Load (Goods): 1600 kg

Safety and Control Features

• Safety Gear: Progressive Safety Catches

• Braking System: Solenoid Brakes

• Overspeed Protection: Overspeed Governor

• Overtravel Protection: Final Limit Switches

• Circuit Protection: Thermal Circuit Breaker

• Door Locks: Electrical and Mechanical

Construction Details

• Hatchway Construction: Concrete / Brick

Maintenance

• Service Frequency: Monthly

Elevator B specification

1. Rope and Lifting System Details:

Rope Manufacturer Information

• Manufacturer: Gustav Wolf

• Origin: Imported

• Date of Manufacture: 17 December 2003

• Date Installed: 10 August 2005

• Certificate Number: 8034260

• Place of Test: Certex, Finland (Hyvinkää)

• Test Date: 12 August 2005

Rope Specifications

• Coil Number: 8038060

• Number of Ropes: 6

• Length (each): 43 m

• Diameter: 13 mm

• Mass per Meter: 0.24 kg/m

• Total Rope Mass: 61.92 kg

Construction Details

• Lay: Ordinary Right-Hand

• Strands: 8

• Wires per Strand: 19 (9/9/1)

• Wire Diameter: 0.4 mm

• Core Type: Fibre Core with Steel Center Wire

• Steel Class: NF19 S-FE

• Tensile Grade: 1570 N/mm²

• Lubrication: Specially Lubricated

Load and Performance Data

• Mass of Elevator Car: 842 kg

• Maximum Load Capacity: 1800 kg

• Total System Mass: 2703.9 kg

Roping Configuration

• Method of Roping: 2:1

Safety Factors

• Factor of Safety (per rope): 2.68

• Aggregated Factor of Safety: 16.07

2. Equipment Particulars

General Information

• Location: Consulate Compound, Redam Road, Steenberg, Cape Town

• Owner: U.S. Government (as above)

• User: U.S. Consulate Cape Town

• Manufacturer: KONE

• Manufacturer ID: 40177713

• Official ID: 08/L 2835

• Date of Construction: 2006

• Service Company: KONE

Elevator Type and Configuration

3. Type: Passenger Elevator

4. Drive Type: Traction

5. Roping Method: 2:1

6. Machinery Location: Shaft (Machine Room-Less)

7. Control System: LCE / V3 vvf3.18 Capacity and Performance

• Rated Load: 1800 kg

• Maximum Number of Persons: 24

• Rated Speed: 1.0 m/s

• Travel Distance: 13,250 mm

• Number of Landings: 4

• Number of Entrances: 1

• Car Floor Area: 4 m²

Mechanical and Electrical Characteristics

• Sheave Diameter: 600 mm

• Motor Type: Synchronous

• Motor Power: 12.4 kW

• Power Supply: AC, 380 V

Weight and Load Data

• Mass of Car: 842 kg

• Counterweight: 2,675 kg

• Maximum Load (Goods): 1800 kg

Safety and Control Features

• Safety Gear: Progressive Safety Catches

• Braking System: Solenoid Brakes

• Overspeed Protection: Overspeed Governor

• Overtravel Protection: Final Limit Switches

• Circuit Protection: Thermal Circuit Breaker

• Door Locks: Electrical and Mechanical

Construction Details

• Hatchway Construction: Concrete / Brick

Maintenance

• Service Frequency: Monthly

ATTACHMENT 2 - LIST OF TASKS TO BE PERFORMED

YEAR_________________ OBSERVE, CLEAN, ADJUST & TEST

MAINTENANCE OPERATION

Week# 1 2 3 4 5 6 7 8 9 1

Car Operation Starter, Control & Relay Panels M.G. Set & Regulator Selector Machine & Brake Relay Panel Supervisory System Rectified Voltage Test Volts Volts Governor Small Motors Car Top, Type E Landing Switch & Door Operator

Hoist Cables & Fastenings - Traveling Cables

Traffic Sentinel Pit-Compensator & Governor Sheave Guide Shoes or Roller Guides Hatch Doors & Interlocks Safety Edge Car Station Slow Down & Hatch Limit Switches

ATTACHMENT 2 (continued) – LIST OF TASKS TO BE PERFORMED: CLEAN & LUBRICATE Week# 1 2 3 4 5 6 7 8 9 1

MG Set & Machine Bearings - Babbitt MG Set & Machine Bearings - Roller Governor Shaft Bearing SD Selector Guide & SD-DM Gear Box Car Door Hanger Rails Secondary Sheave Bearings - Babbitt SN Selector Lead Screw & Cams-Grease Sparingly

SD & DM Selector Chains, Carriage Guides & Cams

Governor Pins, Bevel Gears & Tripping Lever

Stepping Switch Brake Pins Hatch Doors - Terminal Floors Regulator & Small Motors Car Door Operator & Retiring Cam Guide Rail Lubricators Safety, Buffer, Comp.Guides & Gov.Tension Sheave

Deflector, Secondary, 2:1, Compensating Sheave Bearings-Roller

Hatch Doors -Intermediate Floors Door Operator Contact Cams Flexible Guide Shoes Hatch Limits & Slow Down Switch Brake Overhaul - Fill Out & Submit Report

Blow Out Panels & Rotating Equipment

YEAR_________________ OBSERVE, CLEAN, ADJUST & TEST

MAINTENANCE OPERATION

Week # 2

Car Operation Starter, Control & Relay Panels M.G. Set & Regulator Selector Machine & Brake Relay Panel Supervisory System Rectified Voltage Test Volts Volts Governor Small Motors Car Top, Type E Landing Switch & Door Operator

Hoist Cables & Fastenings - Traveling Cables

Traffic Sentinel Pit-Compensator & Governor Sheave Guide Shoes or Roller Guides Hatch Doors & Interlocks Safety Edge Starter, Control & Relay Panel Connections & Wiring

Syncro Dials & Corr. Push Buttons Governor & Safety Test - Fill Out & Submit Report

Evaluation - Fill Out abd Submit Report

CLEAN & LUBRICATE

Week # 2

MG Set & Machine Bearings - Babbitt MG Set & Machine Bearings - Roller Governor Shaft Bearing SD Selector Guide & SD-DM Gear Box Car Door Hanger Rails Secondary Sheave Bearings - Babbitt SN Selector Lead Screw & Cams-Grease Sparingly

SD & DM Selector Chains, Carriage Guides & Cams

Governor Pins, Bevel Gears & Tripping Lever

Stepping Switch Brake Pins Hatch Doors - Terminal Floors Regulator & Small Motors Car Door Operator & Retiring Cam Guide Rail Lubricators Safety, Buffer, Comp.Guides & Gov.Tension Sheave

Deflector, Secondary, 2:1, Compensating Sheave Bearings-Roller

Hatch Doors -Intermediate Floors Door Operator Contact Cams Flexible Guide Shoes

ATTACHMENT 3

GOVERNMENT FURNISHED PROPERTY

NONE

ATTACHMENT 4

EQUIPMENT LIST

Level

Level

Level 3 Space Name Element Equipmen t ID Model Serial Number

Manufacture r

Created Date

In- Service Date

Chancer y

Elevator# 1 - A

Electric Elevator

Traction

Gearless

2044 Monospac e 3000

4017771

Kone` 05/14/200

05/14/200

Chancer y

Elevator# 1 - B

Electric Elevator

Traction

Gearless

2056 Monospac e 3000

4017771

Kone` 05/17/202

05/17/202

SECTION 2 - CONTRACT CLAUSES

52.212-4 CONTRACT TERMS AND CONDITIONS – COMMERCIAL ITEMS

(NOV 2023) IS INCORPORATED BY REFERENCE. (SEE SF-1449,

BLOCK 27A)

FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Products and Commercial Services (JAN 2025)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.] __(1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

__(2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509)).

__(3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

_X_(4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) ( 41 U.S.C. 4712);

this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community—see FAR 3.900(a).

_X_(5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

__(6) [Reserved].

https://www.acquisition.gov/far/part-52#FAR_52_203_19 https://www.acquisition.gov/far/part-52#FAR_52_204_23 https://www.acquisition.gov/far/part-52#FAR_52_204_25 https://www.acquisition.gov/far/part-52#FAR_52_209_10 https://www.acquisition.gov/far/part-52#FAR_52_232_40 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section3903&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title10-section3801&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_233_3 https://www.acquisition.gov/far/part-52#FAR_52_233_4 https://www.acquisition.gov/far/part-52#FAR_52_203_6 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title10-section4655&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_203_13 https://www.acquisition.gov/far/part-52#FAR_52_203_15 https://www.acquisition.gov/far/part-52#FAR_52_203_17 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section4712&num=0&edition=prelim https://www.acquisition.gov/far/part-3#FAR_3_900 https://www.acquisition.gov/far/part-52#FAR_52_204_10 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim

_X_(7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

_X_(8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

_X_(9) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

__(10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders—Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) ( Pub. L. 115–390, title II).

_X_(11)

(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) ( Pub. L. 115–390, title II).

__(ii) Alternate I (Dec 2023) of 52.204-30.

_X_(12) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Nov 2021) ( 31 U.S.C. 6101 note).

__(13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) ( 41 U.S.C. 2313).

__(14) [Reserved].

__(15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) ( 15 U.S.C. 657a).

__(16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__(17) [Reserved] __(18)

(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

__(ii) Alternate I (Mar 2020) of 52.219-6.

__(19)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

__(ii) Alternate I (Mar 2020) of 52.219-7.

__(20) 52.219-8, Utilization of Small Business Concerns (Feb 2024) (15 U.S.C. 637(d)(2) and (3)).

__(21)

(i) 52.219-9, Small Business Subcontracting Plan (Sep 2023) (15 U.S.C. 637(d)(4)).

__(ii) Alternate I (Nov 2016) of 52.219-9.

__(iii) Alternate II (Nov 2016) of 52.219-9.

__(iv) Alternate III (Jun 2020) of 52.219-9.

__(v) Alternate IV (Sep 2023) of 52.219-9.

__(22)

(i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

__(ii) Alternate I (Mar 2020) of 52.219-13.

__(23) 52.219-14, Limitations on Subcontracting (Oct 2022) (15 U.S.C. 657s).

__(24) 52.219-16, Liquidated Damages—Subcontracting Plan (Sep 2021) (15 U.S.C. 637(d)(4)(F)(i)).

__(25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran- Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (Feb 2024) (15 U.S.C. 657f).

https://www.acquisition.gov/far/part-52#FAR_52_204_14 https://www.acquisition.gov/far/part-52#FAR_52_204_15 https://www.acquisition.gov/far/part-52#FAR_52_204_27 https://www.acquisition.gov/far/part-52#FAR_52_204_28 https://www.govinfo.gov/link/plaw/115/public/390 https://www.acquisition.gov/far/part-52#FAR_52_204_30 https://www.govinfo.gov/link/plaw/115/public/390 https://www.acquisition.gov/far/part-52#FAR_52_204_30 https://www.acquisition.gov/far/part-52#FAR_52_209_6 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_209_9 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section2313&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_219_3 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637a&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_219_4 https://www.acquisition.gov/far/part-52#FAR_52_219_6 https://www.acquisition.gov/far/part-52#FAR_52_219_6 https://www.acquisition.gov/far/part-52#FAR_52_219_7 https://www.acquisition.gov/far/part-52#FAR_52_219_7 https://www.acquisition.gov/far/part-52#FAR_52_219_8 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_13 https://www.acquisition.gov/far/part-52#FAR_52_219_13 https://www.acquisition.gov/far/part-52#FAR_52_219_14 https://www.acquisition.gov/far/part-52#FAR_52_219_16 https://www.acquisition.gov/far/part-52#FAR_52_219_27

__(26)

(i) 52.219-28, Post Award Small Business Program Rerepresentation (Feb 2024) (15 U.S.C. 632(a)(2)).

__(ii) Alternate I (Mar 2020) of 52.219-28.

__(27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct 2022) (15…