EDR1255.pdf
PDF 91 KB Posted
- Attached to
- F-16 Wing Assemblies Federal contract opportunity
- Solicitation number
- SPRHA4-24-R-0271
- Issued by
- Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements document (Attachment A) for the manufacture of F-16 Wing Assembly (Part Number 16W1030-861, NSN 1560-01-136-1255WF) issued by Hill Air Force Base on August 22, 2022.
The document specifies detailed IUID (Item Unique Identifier) requirements including minimum 1/8 inch lettering for human readable information and 1/4 inch square machine readable 2D matrix markings that must include CAGE code, part number, and serial number. It mandates several material substitutions, requiring the use of SAE AMS specifications in place of QQ specifications for various aluminum alloys. The document also specifies that IGES data listed in the EDL should be used for manufacture instead of 16PR006, and that all deviations require prior approval from the government engineer. Marking requirements must follow MIL-STD-130 instead of FPS-3008, and material specifications include aluminum alloy 6061 and aluminum tube requirements with specific SAE AMS standards.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA424R0271_______0002.pdf | ||
| SPRHA424R0271_______0001.pdf | ||
| EDR1256.pdf | ||
| EDR9945.pdf | ||
| EDL1256.pdf | ||
| EDL9943.pdf | ||
| CDRLFATRA001.pdf | ||
| SPRHA424R0271.pdf | ||
| EDR9943.pdf | ||
| SPI.pdf | ||
| SOW.pdf | ||
| EDL1255.pdf | ||
| MQR.pdf | ||
| EDR9944.pdf | ||
| EDR1366.pdf | ||
| EDL9944.pdf | ||
| EDL9945.pdf | ||
| EDL1366.pdf | ||
| CDRLFATRA002.pdf |
Show all 19
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
WING ASSEMBLY, AIRCRAFT (F-16)
2. PART NUMBER:
16W1030-861
3. NATIONAL STOCK NUMBER:
1560-01-136-1255WF
PREPARED BY:
KENNETH MACKAY
OFFICE SYMBOL:
416 SCMC/GUEAA
DATE:
AUG. 22, 2022
HILL AFB FORM 462 Page 1 of 2
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.
7. IUID (ITEM UNIQUE IDENTIFIER) REQUIREMENTS AND EXPECTATIONS WHICH THE CONTRACTOR MUST ENSURE ARE COMPLIED WITH, CONTRACTORS DRAWINGS SHALL BE CHANGED OR SUPPLEMENTED BY CONTRACTOR FOR IUID
COMPLIANCE.
A. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, (IF EXISTING LABEL IS TO BE REPLACED), ONLY
DELETE EXISTING LABEL WITH GOVERNMENT ENGINEERING PERMISSION.
B. USE HRI (HUMAN READABLE) AND MACHINE READABLE MATRIX. (USAF NOT EQUIPED TO READ BARCODE).
C. IUID MATRIX NEEDS TO BE HIGHLY VISIBLE, IN A LOCATION EASILY ACCESSIBLE.
D. IUID MARKING MUST BE PERMANENT.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418
F. IUID MARKING SPECIFICATIONS.
1. MINIMUM 1/8 INCH LETTERING ON HUMAN READABLE TO INCLUDE:
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
2. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX -CONSTRUCT 2 - TO INCLUDE
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
8. USE MATERIAL PER SAE AMS-QQ-A-250/4 IN LIEU OF QQ-A-250/4.
9. USE MATERIAL PER SAE AMS-QQ-A-250/5 IN LIEU OF QQ-A-250/5.
10. USE MATERIAL PER SAE AMS-QQ-A-250/6 IN LIEU OF QQ-A-250/6.
11. USE MATERIAL PER SAE AMS-QQ-A-250/8 IN LIEU OF QQ-A-250/8.
12. USE MATERIAL PER SAE AMS-QQ-A-250/11 IN LIEU OF QQ-A-250/11.
13. USE MATERIAL PER SAE AMS-QQ-A-367 IN LIEU OF QQ-A-367.
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
WING ASSEMBLY, AIRCRAFT (F-16)
2. PART NUMBER:
16W1030-861
3. NATIONAL STOCK NUMBER:
1560-01-136-1255WF
PREPARED BY:
KENNETH MACKAY
OFFICE SYMBOL:
416 SCMC/GUEAA
DATE:
AUG. 22, 2022
HILL AFB FORM 462 Page 2 of 2
10. 16PR006 WILL NOT BE FURNISHED. USE IGES DATA LISTED IN THE EDL FOR MANUFACTURE
11. IF DEVIATIONS FROM THESE INSTRUCTIONS ARE REQUIRED OR DESIRED, PERMISSION FROM GOVERNMENT
ENGINEER IS REQUIRED.
12. MATERIAL ALUMINUM ALLOY PER SAE AMS-QQ-A-250/4 IN LIEU OF QQ-A-250/4.
13. MATERIAL ALUMINUM ALLOY 6061 PER SAE AMS-QQ-A-250/11 OR SAE AMS QQ-A-225/8 IN LIEU OF QQ-A-250/11 AND
QQ-A-250/8.
14. MATERIAL ALUMINUM TUBE PER SAE AMS-WW-T-700/4 IN LIEU OF WW-T-700/4.
15. MARKING PER MIL-STD-130 IN LIEU OF FPS-3008.
File details come from the government source that posted it. Updated .