E0.2 ELECTRICAL STANDARD SCHEDULES.pdf

PDF 1000 KB Posted May 22, 2026

Attached to: Chillers & Chilled Water Pump Upgrades
Solicitation number: RFQ ABS 260000000308 3
Issued by: Michigan

About this file

Written by GovTribe AI · May 26, 2026

This is an electrical standard schedules document for the Anchor Bay School District's Maconce Elementary School HVAC Upgrade project located at 5201 County Line Road, Casco, Michigan 48064. The document, prepared by Peter Basso Associates (PBA Project No. 2026.0034.53), contains comprehensive electrical design standards and specifications for the construction phase of the project, issued as part of Addendum No. 1 dated May 22, 2026. The schedules establish standardized requirements for motor circuit sizing at 480V three-phase, branch circuit voltage drop wiring for single-phase circuits, feeder and branch circuit sizing for general purposes, and raceway and conductor applications for both interior and exterior installations.

The document provides detailed technical specifications including motor horsepower ratings ranging from 0.5 HP to 200 HP with corresponding switch/fuse combinations, circuit breaker amperage, starter sizes, and motor disconnect requirements. Branch circuit voltage drop tables are specified for 120V, 208V, 240V, 277V, and 480V systems with maximum circuit lengths based on wire gauge and circuit ratings. Additional schedules outline feeder and branch circuit sizing from 15-20 amperes through 2000 amperes with copper conductor specifications and conduit requirements. The document also includes a raceway and conductor application schedule detailing approved materials such as EMT, IMC, RSC, FMC, LFMC, metal clad cable, and VFC cable for various interior and exterior applications. A panelboard schedule (E)PANELBOARD RP-CC specifies 208Y/120V service with 400A bus ampacity, MLO main type, and surface mounting, accommodating both existing loads and future spare capacity with total calculated load of 17.14 KVA and 48 amperes.

View the file

Other files

File	Type	Posted
Exhibit G. Maconce Elementary MEP Drawing Set (1) (1).pdf.bz2	BZ2 file	May 22, 2026
Anchor Bay School District - Chillers RFP Ph 1_May 15 2026.pdf	PDF	May 22, 2026
E0.3 ELECTRICAL COMPOSITE NEW WORK PLAN.pdf	PDF	May 22, 2026
Addendum 1 - ABSD - Chillers & CHW Pumps RFP Phase 1.pdf	PDF	May 22, 2026
Exhibit F. MacDonald Elementary MEP Drawing Set (1).pdf	PDF	May 22, 2026
Anchor Bay Schools 2025 Energy Services Performance Contract - M&E Specifications for Construction Documents.pdf	PDF	May 22, 2026
Exhibit H. Residual Value and Disposition of Existing Chillers.pdf	PDF	May 22, 2026
Exhibit E. Lottie Schmidt MEP Drawing Set (1).pdf	PDF	May 22, 2026
E5.1 ONE LINE DIAGRAM.pdf	PDF	May 22, 2026
Exhibit A. Subcontractor Master Agreement.pdf	PDF	May 22, 2026
ED0.3 ELECTRICAL COMPOSITE DEMOLITION PLAN.pdf	PDF	May 22, 2026
MacDonald Temperature Controls.jpg	JPG image	May 22, 2026
Lighthouse Temperature Controls.jpg	JPG image	May 22, 2026
Exhibit C. M&E Specifications for Construction Documents.pdf	PDF	May 22, 2026
ABSD Chillers & CHWP RFP Bid Notice 051526.pdf	PDF	May 22, 2026
M7.2 MECHANICAL SCHEDULES.pdf	PDF	May 22, 2026
Lottie Temperature Controls.jpg	JPG image	May 22, 2026
Exhibit D. Lighthouse Elementary MEP Drawing Set (1).pdf	PDF	May 22, 2026
Maconce Temperture Controls.jpg	JPG image	May 22, 2026

Show all 19

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

O R

O L

O O

U pg ra de

C ou nt y Li ne R oa d, C as co , M

I 4

N R

SHEET No.

DATE

05-1-2026

ISSUE

CONSTRUCTION

DOCUMENTS

L iv er no is , S ui te

Tr oy

, M ic hi ga n

-3

Te l:

9-ww w.

Pe te rB as so

As so cia te s.

co m

A Pr oj ec t N o.

: 2

P et er

B as so A ss o ci at es

N ot fo r C on st ru ct io n

U M

N O

-2 2-

AutoCAD SHX Text

MOTOR CIRCUIT SIZING SCHEDULE (480V, 3 PHASE)

AutoCAD SHX Text

MOTOR HP

AutoCAD SHX Text

SWITCH/ FUSE

AutoCAD SHX Text

CIRCUIT BREAKER

AutoCAD SHX Text

STARTER SIZE/TYPE

AutoCAD SHX Text

MOTOR DISCONNECT (NOTE 3)

AutoCAD SHX Text 1/2

AutoCAD SHX Text 30/3A

AutoCAD SHX Text 15A

AutoCAD SHX Text

AutoCAD SHX Text 30A

AutoCAD SHX Text 3/4

AutoCAD SHX Text 30/3A

AutoCAD SHX Text 15A

AutoCAD SHX Text

AutoCAD SHX Text 30A

AutoCAD SHX Text

AutoCAD SHX Text 30/6A

AutoCAD SHX Text 15A

AutoCAD SHX Text

AutoCAD SHX Text 30A

AutoCAD SHX Text 1 1/2

AutoCAD SHX Text 30/6A

AutoCAD SHX Text 15A

AutoCAD SHX Text

AutoCAD SHX Text 30A

AutoCAD SHX Text

AutoCAD SHX Text 30/6A

AutoCAD SHX Text 15A

AutoCAD SHX Text

AutoCAD SHX Text 30A

AutoCAD SHX Text

AutoCAD SHX Text 30/10A

AutoCAD SHX Text 15A

AutoCAD SHX Text

AutoCAD SHX Text 30A

AutoCAD SHX Text

AutoCAD SHX Text 30/15A

AutoCAD SHX Text 15A

AutoCAD SHX Text

AutoCAD SHX Text 30A

AutoCAD SHX Text 7 1/2

AutoCAD SHX Text 30/20A

AutoCAD SHX Text 20A

AutoCAD SHX Text

AutoCAD SHX Text 30A

AutoCAD SHX Text

AutoCAD SHX Text 30/20A

AutoCAD SHX Text 25A

AutoCAD SHX Text

AutoCAD SHX Text 30A

AutoCAD SHX Text

AutoCAD SHX Text 30/30A

AutoCAD SHX Text 40A

AutoCAD SHX Text

AutoCAD SHX Text 30A

AutoCAD SHX Text

AutoCAD SHX Text 60/40A

AutoCAD SHX Text 60A

AutoCAD SHX Text

AutoCAD SHX Text 60A

AutoCAD SHX Text

AutoCAD SHX Text 60/50A

AutoCAD SHX Text 70A

AutoCAD SHX Text

AutoCAD SHX Text 60A

AutoCAD SHX Text

AutoCAD SHX Text 60/60A

AutoCAD SHX Text 80A

AutoCAD SHX Text

AutoCAD SHX Text 60A

AutoCAD SHX Text

AutoCAD SHX Text 100/80A

AutoCAD SHX Text 90A

AutoCAD SHX Text

AutoCAD SHX Text 100A

AutoCAD SHX Text

AutoCAD SHX Text 100/100A

AutoCAD SHX Text 100A

AutoCAD SHX Text

AutoCAD SHX Text 100A

AutoCAD SHX Text

AutoCAD SHX Text 200/125A

AutoCAD SHX Text 125A

AutoCAD SHX Text

AutoCAD SHX Text 200A

AutoCAD SHX Text

AutoCAD SHX Text 200/150A

AutoCAD SHX Text 150A

AutoCAD SHX Text

AutoCAD SHX Text 200A

AutoCAD SHX Text

AutoCAD SHX Text 200/200A

AutoCAD SHX Text 200A

AutoCAD SHX Text

AutoCAD SHX Text 200A

AutoCAD SHX Text

AutoCAD SHX Text 200/200A

AutoCAD SHX Text 225A

AutoCAD SHX Text

AutoCAD SHX Text 200A

AutoCAD SHX Text

AutoCAD SHX Text 400/250A

AutoCAD SHX Text 250A

AutoCAD SHX Text

AutoCAD SHX Text 400A

AutoCAD SHX Text

AutoCAD SHX Text 400/350A

AutoCAD SHX Text 350A

AutoCAD SHX Text

AutoCAD SHX Text 400A

AutoCAD SHX Text GENERAL NOTES: 1. BASED ON MOTOR FULL LOAD AMPERES AS PROVIDED BY THE NEC 2. BASED ON MOTOR RUNNING OVERLOAD PROTECTIONS PROVIDED BY THERMAL OVERLOAD RELAYS. 3. WHERE THE STARTER IS LOCATED REMOTE FROM THE MOTOR, PROVIDE DISCONNECT LOCATED AT THE MOTOR, SIZE AS INDICATED.

AutoCAD SHX Text

BRANCH CIRCUIT VOLTAGE DROP WIRING SCHEDULE FOR SINGLE PHASE CIRCUITS

AutoCAD SHX Text

BRANCH CKT RATING (A)

AutoCAD SHX Text

WIRE SIZE (AWG)

AutoCAD SHX Text

MAXIMUM BRANCH CIRCUIT LENGTH (IN FEET)

AutoCAD SHX Text 120V

AutoCAD SHX Text 208V

AutoCAD SHX Text 240V

AutoCAD SHX Text 277V

AutoCAD SHX Text 480V

AutoCAD SHX Text 20A

AutoCAD SHX Text

AutoCAD SHX Text 30A

AutoCAD SHX Text

AutoCAD SHX Text GENERAL NOTES: 1. THE ABOVE TABLE VALUES ARE BASED ON COPPER CONDUCTORS, IN STEEL CONDUIT, WITH A LOAD POWER FACTOR OF 0.85 PER NEC CHAPTER 9, TABLE 9. 2. PROVIDE BRANCH CIRCUIT CONDUCTORS AS INDICATED IN THE TABLE ABOVE FOR ALL LIGHTING AND RECEPTACLE BRANCH CIRCUITS. WHERE BRANCH CIRCUITS SERVE DEDICATED EQUIPMENT, THE CONTRACTOR MAY PERFORM VOLTAGE DROP CALCULATIONS BASED ON ACTUAL EQUIPMENT CONNECTED LOAD AND PROVIDE CONDUCTORS APPROPRIATELY SIZED TO LIMIT VOLTAGE DROP TO A MAXIMUM OF 3%. 3. CONDUCTOR SIZES ARE BASED ON MAXIMUM OF 9 CURRENT CARRYING CONDUCTORS IN A SINGLE CONDUIT. 4. LIMITS FOR CONDUCTOR LENGTHS SHOWN ARE BASED ON A MAXIMUM BRANCH CIRCUIT LOADING OF 64% OF THE BRANCH BREAKER RATING AND A MAXIMUM OF 3 PERCENT VOLTAGE DROP TO COMPLY WITH ASHRAE 90.1 AND THE NEC. FOR CIRCUITS LOADED GREATER THAN 64% OF BRANCH BREAKER RATING, THE CONTRACTOR SHALL PROVIDE CONDUCTORS APPROPRIATELY SIZED TO LIMIT VOLTAGE DROP TO 3%.

AutoCAD SHX Text

FEEDER AND BRANCH CIRCUIT SIZING SCHEDULE - GENERAL PURPOSE

AutoCAD SHX Text

OVERCURRENT DEVICE RATING (AMPERES)

AutoCAD SHX Text

COPPER CONDUCTORS

AutoCAD SHX Text

KEYED NOTES

AutoCAD SHX Text

WIRE SIZE (AWG OR KCMIL)

AutoCAD SHX Text

CONDUIT SIZE

AutoCAD SHX Text

PHASE & NEUTRAL

AutoCAD SHX Text

GROUND

AutoCAD SHX Text

SINGLE PHASE 2 WIRE+G (1PH, 1N, 1G; 2PH, 1G)

AutoCAD SHX Text

SINGLE PHASE 3 WIRE+G (2PH, 1N, 1G)

AutoCAD SHX Text

THREE PHASE 3 WIRE+G (3PH, 1G)

AutoCAD SHX Text

THREE PHASE & NEUTRAL 4 WIRE+G (3PH, 1N, 1G)

AutoCAD SHX Text 15-20

AutoCAD SHX Text

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 25-30

AutoCAD SHX Text

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 35-40

AutoCAD SHX Text

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 45-50

AutoCAD SHX Text 8 (6)

AutoCAD SHX Text

AutoCAD SHX Text 3/4"

AutoCAD SHX Text

AutoCAD SHX Text 6 (4)

AutoCAD SHX Text

AutoCAD SHX Text 3/4" (1")

AutoCAD SHX Text 1" (1 1/4")

AutoCAD SHX Text

AutoCAD SHX Text 1"

AutoCAD SHX Text 1 1/4"

AutoCAD SHX Text

AutoCAD SHX Text 4 (3)

AutoCAD SHX Text

AutoCAD SHX Text 1"

AutoCAD SHX Text 1 1/4"

AutoCAD SHX Text

AutoCAD SHX Text 90-100

AutoCAD SHX Text 3 (2)

AutoCAD SHX Text

AutoCAD SHX Text 1 1/4"

AutoCAD SHX Text

AutoCAD SHX Text 2 (1)

AutoCAD SHX Text

AutoCAD SHX Text 1 1/4"

AutoCAD SHX Text 1 1/4" (1 1/2")

AutoCAD SHX Text

AutoCAD SHX Text 1 (1/0)

AutoCAD SHX Text

AutoCAD SHX Text 1 1/4" (1 1/2")

AutoCAD SHX Text 1 1/2"

AutoCAD SHX Text

AutoCAD SHX Text 1/0

AutoCAD SHX Text

AutoCAD SHX Text 1 1/2"

AutoCAD SHX Text

AutoCAD SHX Text 2/0

AutoCAD SHX Text

AutoCAD SHX Text 2"

AutoCAD SHX Text

AutoCAD SHX Text 3/0

AutoCAD SHX Text

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 1/2"

AutoCAD SHX Text

AutoCAD SHX Text 4/0

AutoCAD SHX Text

AutoCAD SHX Text 2"

AutoCAD SHX Text 2 1/2"

AutoCAD SHX Text

AutoCAD SHX Text 2 1/2"

AutoCAD SHX Text

AutoCAD SHX Text 2 1/2"

AutoCAD SHX Text 3"

AutoCAD SHX Text

AutoCAD SHX Text 3"

AutoCAD SHX Text

AutoCAD SHX Text 3"

AutoCAD SHX Text

AutoCAD SHX Text 2-4/0

AutoCAD SHX Text 2-2

AutoCAD SHX Text

AutoCAD SHX Text 2-2"

AutoCAD SHX Text 2-2 1/2"

AutoCAD SHX Text

AutoCAD SHX Text 2-250

AutoCAD SHX Text 2-2

AutoCAD SHX Text

AutoCAD SHX Text 2-2 1/2"

AutoCAD SHX Text

AutoCAD SHX Text 2-350

AutoCAD SHX Text 2-1

AutoCAD SHX Text

AutoCAD SHX Text 2-2 1/2"

AutoCAD SHX Text 2-3"

AutoCAD SHX Text

AutoCAD SHX Text 2-500

AutoCAD SHX Text 2-1/0

AutoCAD SHX Text

AutoCAD SHX Text 2-3"

AutoCAD SHX Text 2-3 1/2"

AutoCAD SHX Text

AutoCAD SHX Text 2-500

AutoCAD SHX Text 2-1/0

AutoCAD SHX Text

AutoCAD SHX Text 2-3"

AutoCAD SHX Text 2-3 1/2"

AutoCAD SHX Text

AutoCAD SHX Text 3-400

AutoCAD SHX Text 3-2/0

AutoCAD SHX Text

AutoCAD SHX Text 3-3"

AutoCAD SHX Text

AutoCAD SHX Text 3-600

AutoCAD SHX Text 3-3/0

AutoCAD SHX Text

AutoCAD SHX Text 3-3 1/2"

AutoCAD SHX Text

AutoCAD SHX Text 4-600

AutoCAD SHX Text 4-4/0

AutoCAD SHX Text

AutoCAD SHX Text 4-3 1/2"

AutoCAD SHX Text

AutoCAD SHX Text 5-600

AutoCAD SHX Text 5-250

AutoCAD SHX Text

AutoCAD SHX Text 5-3 1/2"

AutoCAD SHX Text GENERAL NOTES: 1. CONTRACTOR TO SIZE FEEDERS AND BRANCH CIRCUITS BASED ON THIS SCHEDULE AND OVER CURRENT DEVICE SIZE, UNLESS NOTED OTHERWISE. 2. CONTRACTOR MAY COMBINE 20A CIRCUITS AS NOTED IN SPECIFICATION. 3. CONDUCTORS ARE BASED ON THHN/THWN-2 UP TO AND INCLUDING #4/0. LARGER THAN #4/0 ARE BASED ON TYPE XHHW. 4. CONDUIT SIZES ARE VALID FOR EMT OR RSC. CONDUIT SIZES SHALL BE ADJUSTED AS REQUIRED FOR OTHER TYPES OF CONDUIT. 5. SIZE OF DISCONNECT SWITCH LOCATED AT EQUIPMENT SHALL BE SIZED BASED UPON OVERCURRENT PROTECTION OF THAT DEVICE. 6. OBTAIN APPROVAL FROM ENGINEER PRIOR TO INSTALLING DIFFERENT SIZE/QUANTITY OF CONDUCTORS TO OBTAIN AN EQUIVALENT AMPACITY. KEYED NOTES: 1. CONDUCTORS ARE BASED ON 90°C, 600V INSULATED WIRE APPLIED AT 75°C FOR TERMINATION RATED 60/75°C OR 75°C. FOR TERMINATION RATED AT 60°C, USE CONDUCTORS AND CONDUIT SIZES INDICATED IN PARENTHESES.

AutoCAD SHX Text

RACEWAY / CONDUCTOR / CABLE APPLICATION SCHEDULE

AutoCAD SHX Text

WIRE

AutoCAD SHX Text

COPPER, TYPE THHN/THWN-2

AutoCAD SHX Text

COPPER, TYPE XHHW-2

AutoCAD SHX Text

RACEWAY

AutoCAD SHX Text

ELECTRICAL METALLIC TUBING (EMT)

AutoCAD SHX Text

INTERMEDIATE METAL CONDUIT (IMC)

AutoCAD SHX Text

RIGID STEEL CONDUIT (RSC)

AutoCAD SHX Text

FLEXIBLE METAL CONDUIT (FMC)

AutoCAD SHX Text

LIQUID TIGHT FLEXIBLE METAL CONDUIT (LFMC)

AutoCAD SHX Text

SURFACE RACEWAY

AutoCAD SHX Text

CABLE / CORD

AutoCAD SHX Text

METAL CLAD TYPE CABLE WITH INSULATED GROUND WIRE (TYPE MC)

AutoCAD SHX Text

VFC CABLE

AutoCAD SHX Text

FEEDERS - EXTERIOR

AutoCAD SHX Text

EXPOSED, SURFACE MOUNTED TO STRUCTURE

AutoCAD SHX Text X

AutoCAD SHX Text

EXPOSED, WITH FREESTANDING SUPPORT

AutoCAD SHX Text X

AutoCAD SHX Text

ROOFTOPS (WHEN APPROVED BY ENGINEER)

AutoCAD SHX Text X

AutoCAD SHX Text

FEEDERS - INTERIOR

AutoCAD SHX Text

CONCEALED, ACCESSIBLE CEILINGS

AutoCAD SHX Text X

AutoCAD SHX Text

CONCEALED, INACCESSIBLE CEILINGS

AutoCAD SHX Text X

AutoCAD SHX Text

CONCEALED IN GYPSUM BOARD PARTITION WALLS

AutoCAD SHX Text X

AutoCAD SHX Text

EXPOSED, BELOW 10' AFF AND SUBJECT TO DAMAGE

AutoCAD SHX Text X

AutoCAD SHX Text

EXPOSED, BELOW 10' AFF AND NOT SUBJECT TO DAMAGE

AutoCAD SHX Text X

AutoCAD SHX Text

EXPOSED, ABOVE 10' AFF UNFINISHED SPACES

AutoCAD SHX Text X

AutoCAD SHX Text

EXPOSED, FINISHED SPACES

AutoCAD SHX Text X

AutoCAD SHX Text

DAMP AND WET LOCATIONS

AutoCAD SHX Text X

AutoCAD SHX Text

BRANCH CIRCUITS - EXTERIOR

AutoCAD SHX Text

EXPOSED, SURFACE MOUNTED TO STRUCTURE

AutoCAD SHX Text X

AutoCAD SHX Text

EXPOSED, WITH FREESTANDING SUPPORT

AutoCAD SHX Text X

AutoCAD SHX Text

ROOFTOPS (WHEN APPROVED BY ENGINEER)

AutoCAD SHX Text X

AutoCAD SHX Text

BRANCH CIRCUITS - INTERIOR

AutoCAD SHX Text

CONCEALED, ACCESSIBLE CEILINGS

AutoCAD SHX Text X

AutoCAD SHX Text

CONCEALED, INACCESSIBLE CEILINGS

AutoCAD SHX Text X

AutoCAD SHX Text

CONCEALED IN GYPSUM BOARD PARTITION WALLS

AutoCAD SHX Text X

AutoCAD SHX Text

EXPOSED, BELOW 10' AFF AND SUBJECT TO DAMAGE

AutoCAD SHX Text X

AutoCAD SHX Text

EXPOSED, BELOW 10' AFF AND NOT SUBJECT TO DAMAGE

AutoCAD SHX Text X

AutoCAD SHX Text

EXPOSED, ABOVE 10' AFF UNFINISHED SPACES

AutoCAD SHX Text X

AutoCAD SHX Text

DAMP AND WET LOCATIONS

AutoCAD SHX Text X

AutoCAD SHX Text

SPECIAL APPLICATIONS

AutoCAD SHX Text

CONNECTION BETWEEN VFC AND MOTORS (KEYED NOTE 1)

AutoCAD SHX Text X

AutoCAD SHX Text

CLASS 1 CONTROL CIRCUITS

AutoCAD SHX Text X

AutoCAD SHX Text

CLASS 2 CONTROL CIRCUITS

AutoCAD SHX Text X

AutoCAD SHX Text

CLASS 3 CONTROL CIRCUITS

AutoCAD SHX Text X

AutoCAD SHX Text

CONNECTIONS TO TRANSFORMERS, MOTORS AND VIBRATING EQUIPMENT

AutoCAD SHX Text X

AutoCAD SHX Text

GENERAL NOTES:

AutoCAD SHX Text

1. TRANSITION FROM PVC/HDPE AND PROVIDE RIGID STEEL OR RTRC SWEEPS WHERE CONDUITS PENETRATE WALLS, CONCRETE SLABS, CONCRETE BASES, AND ASPHALT. 2. REFER TO SPECIFICATIONS FOR RESTRICTIONS ON MC/AC CABLE INSTALLATION. 3. EMT SHALL NOT BE USED ON THE EXTERIOR OF A BUILDING OR IN AREAS SUBJECT TO DAMAGE BELOW 10' AFF.

AutoCAD SHX Text

KEYED NOTES:

AutoCAD SHX Text

1. NON-ARMORED CABLE SHALL BE INSTALLED IN RACEWAY. ARMORED CABLE SHALL BE INSTALLED IN TRAY OR FREE-AIR AS APPLICABLE. 2. CONDUIT AND BUILDING WIRE ALLOWED PER ONE OF THE FOLLOWING METHODS: ROUTED OUTSIDE THE BUILDING, ROUTED UNDER A MINIMUM OF 2" OF CONCRETE BENEATH THE BUILDING, OR ENCASED IN A MINIMUM OF 2" OF CONCRETE. 3. EMERGENCY FEEDERS IN OCCUPANCIES THAT ARE UNDER 700.10(D) SHALL HAVE A TWO HOUR RATING. RATING SHALL BE OBTAINED BY ROUTING CONDUIT AND BUILDING WIRE IN SPRINKLERED SPACE, IN A TWO HOUR SHAFT, OUTSIDE OF THE BUILDING, IN A LISTED TWO HOUR RATED RACEWAY, OR UNDER A MINIMUM OF 2" OF CONCRETE; OR BY USING A LISTED TWO-HOUR RATED CABLE ASSEMBLY. 4. SHALL BE INSTALLED PER MANUFACTURER'S INSTRUCTIONS BASED ON UL TESTING AND RATING. 5. INTERMEDIATE METAL CONDUIT AND RIGID STEEL CONDUIT, INCLUDING ALL FITTINGS, BOXES AND SUPPORTS, SHALL BE TREATED WITH CORROSION RESISTANT PAINT. FLEXIBLE CORD SHALL ONLY BE USED FOR FINAL CONNECTION TO LUMINAIRES.

AutoCAD SHX Text

(E)PANELBOARD RP-CC

AutoCAD SHX Text

LOAD TYPE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

CB TYPE

AutoCAD SHX Text

ØA

AutoCAD SHX Text

ØB

AutoCAD SHX Text

ØC

AutoCAD SHX Text

CB TYPE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

LOAD TYPE

AutoCAD SHX Text

EXISTING LOAD

AutoCAD SHX Text

EXISTING LOAD

AutoCAD SHX Text

EXISTING LOAD

AutoCAD SHX Text

EXISTING LOAD

AutoCAD SHX Text

EXISTING LOAD

AutoCAD SHX Text

EXISTING LOAD

AutoCAD SHX Text

EXISTING LOAD

AutoCAD SHX Text

EXISTING LOAD

AutoCAD SHX Text

AutoCAD SHX Text M

AutoCAD SHX Text

AHU-2

AutoCAD SHX Text

EXISTING LOAD

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

EXISTING LOAD

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

EXISTING LOAD

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

EXISTING LOAD

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

EXISTING LOAD

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

EXISTING LOAD

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

EXISTING LOAD

AutoCAD SHX Text

EXISTING LOAD

AutoCAD SHX Text

ØA

AutoCAD SHX Text

ØB

AutoCAD SHX Text

ØC

AutoCAD SHX Text

PANELBOARD INFORMATION

AutoCAD SHX Text

DEMAND FACTOR

AutoCAD SHX Text

CALCULATED LOAD

AutoCAD SHX Text

FEEDER AND OCPD SIZING

AutoCAD SHX Text

VOLTAGE:

AutoCAD SHX Text 208Y/120

AutoCAD SHX Text

BRANCH CIRCUIT CONNECTED LOAD

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

BUS AMPACITY:

AutoCAD SHX Text 400A

AutoCAD SHX Text

CONTINUOUS LOAD (C)

AutoCAD SHX Text 100%

AutoCAD SHX Text 125%

AutoCAD SHX Text

MAIN TYPE:

AutoCAD SHX Text

MLO

AutoCAD SHX Text

ELECTRIC HEAT (E)

AutoCAD SHX Text 100%

AutoCAD SHX Text

MINIMUM A.I.C.:

AutoCAD SHX Text

NON-CONTINUOUS LOAD (NC)

AutoCAD SHX Text 15820

AutoCAD SHX Text 100%

AutoCAD SHX Text 15820

AutoCAD SHX Text 100%

AutoCAD SHX Text 15820

AutoCAD SHX Text

MOUNTING:

AutoCAD SHX Text

SURFACE

AutoCAD SHX Text

KITCHEN LOAD (K)

AutoCAD SHX Text 100%

AutoCAD SHX Text

RECEPTACLE BASE LOAD (R)

AutoCAD SHX Text 100%

AutoCAD SHX Text

FEED-THROUGH LUGS

AutoCAD SHX Text

RECEPTACLE DEMAND LOAD (R)

AutoCAD SHX Text 50%

AutoCAD SHX Text 100%

AutoCAD SHX Text

DOUBLE LUGS

AutoCAD SHX Text

LIGHTING LOAD (L)

AutoCAD SHX Text 100%

AutoCAD SHX Text 125%

AutoCAD SHX Text

INTEGRAL SPD

AutoCAD SHX Text

ADDITIONAL TRACK LIGHTING LOAD

AutoCAD SHX Text 100%

AutoCAD SHX Text

MOTORS, HIGHEST LOAD (MH)

AutoCAD SHX Text 125%

AutoCAD SHX Text 100%

AutoCAD SHX Text

PANELBOARD LOCATION

AutoCAD SHX Text

MOTORS, REMAINING LOAD (M)

AutoCAD SHX Text

AutoCAD SHX Text 100%

AutoCAD SHX Text

AutoCAD SHX Text 100%

AutoCAD SHX Text

NOTE: DEMAND AND SIZING INFORMATION IS CALCULATED FROM CONNECTED LOAD

AutoCAD SHX Text

TOTAL(KVA):

AutoCAD SHX Text 17.14

AutoCAD SHX Text

TOTAL (AMPS):

AutoCAD SHX Text

TOTAL (AMPS):

AutoCAD SHX Text

AutoCAD SHX Text E0.2

AutoCAD SHX Text g:\2026\2026-0034-00\CAD\53 maconce es hvac upgrade\2026-0034-53-E0-IND.dwg, E0.2, 5/22/2026 9:45:17 AM, Nathan D.B. Hand, Peter Basso Associates Inc., E0.2, 5/22/2026 9:45:17 AM, Nathan D.B. Hand, Peter Basso Associates Inc.E0.2, 5/22/2026 9:45:17 AM, Nathan D.B. Hand, Peter Basso Associates Inc., 5/22/2026 9:45:17 AM, Nathan D.B. Hand, Peter Basso Associates Inc.5/22/2026 9:45:17 AM, Nathan D.B. Hand, Peter Basso Associates Inc., Nathan D.B. Hand, Peter Basso Associates Inc.Nathan D.B. Hand, Peter Basso Associates Inc., Peter Basso Associates Inc.

AutoCAD SHX Text

CONSULTING ENGINEERS

File details come from the government source that posted it. Updated May 26, 2026.