DWG_FY26_2472_11B 10114 6P_Kitchenette.pdf

PDF 2 MB Posted Jul 23, 2026

Attached to: B2472 Kitchenette Installation, Ft Bliss, TX
Solicitation number: W911SG26BA012
Issued by: Department of the Army Materiel Command Mission and Installation Contracting Command Fort Hood

About this file

Written by GovTribe AI · Jul 23, 2026

This document is a set of architectural and engineering drawings for renovation work at Fort Bliss, Texas, specifically for Building 2472, which contains new kitchenettes in Rooms 121, 209, and 309.

The drawings include demolition plans, new work plans for mechanical, plumbing, and electrical systems, and cabinet elevations. Demolition work involves removing existing fixtures, walls, ceiling panels, gypsum board, and drawing fountains in preparation for construction. New work includes installation of stainless steel sinks with waste disposers, kitchen hoods with ductwork, cabinets with specifications for materials and finishes, plumbing fixtures including faucets and drains, and electrical systems for lighting, power, and kitchen equipment. The specifications detail cabinet construction using oak wood with various depths and finishes, plumbing fixture schedules (including kitchen sinks and waste disposers), kitchen hood specifications with CFM ratings and electrical requirements, and general notes requiring contractor coordination with government representatives, asbestos surveys, protection of existing equipment and finishes, and compliance with applicable codes and regulations. The project requires field verification of existing conditions prior to construction, protection of communication systems during work, and proper disposal of materials removed during demolition.

View the file

Other files

File	Type	Posted
W911SG-26-B-A012 Abstract of Offers OF 1419 PAGE 1of3.pdf	PDF	Aug 27, 2026
W911SG-26-B-A012 Abstract of Offers OF 1419 PAGE 3of3.pdf	PDF	Aug 27, 2026
W911SG-26-B-A012 Abstract of Offers OF 1419 PAGE 2of3.pdf	PDF	Aug 27, 2026
RFI_B2472_COR Response.pdf	PDF	Aug 14, 2026
SOW_FY26_2472_11B 10114 6P_Kitchenette_20260715 (uncurrupted file).pdf	PDF	Jul 28, 2026
Waste Disposer.pdf	PDF	Jul 23, 2026
SOW_FY26_2472_11B 10114 6P_Kitchenette_20260715.pdf	PDF	Jul 23, 2026
As-Builts_2472.zip	ZIP file	Jul 23, 2026
Asbestos Lead Survey_Bldg-2472_20080617.pdf	PDF	Jul 23, 2026
26-0366_Environmental Review_11B 10114 6P (1).pdf	PDF	Jul 23, 2026
As-Builts 2472 (FB-PK).pdf	PDF	Jul 23, 2026
Solicitation - W911SG26BA012.pdf	PDF	Jul 23, 2026
specification_guide-12_3661_19_quartz_agglomerate_countertops.pdf_safe.pdf	PDF	Jul 23, 2026
TX20260245 Wage Determination.pdf	PDF	Jul 23, 2026

Show all 14

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

D E S C R

O N

M A R K

D A

D P

R T

AutoCAD SHX Text

PROJECT LOCATION MAP

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text N

AutoCAD SHX Text

FORT BLISS, TEXAS

AutoCAD SHX Text

PROJECT LOCATION

AutoCAD SHX Text

INDEX OF DRAWINGS

AutoCAD SHX Text

1 = COVER SHEET

AutoCAD SHX Text

NO.

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

2 = DEMOLITION PLANS

AutoCAD SHX Text

COVER SHEET

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text

STENNIS ST.

AutoCAD SHX Text

NEW KITCHENETTES BLDG. 2472 ROOMS 121, 209 & 309

AutoCAD SHX Text

4 = NEW WORK PLAN

AutoCAD SHX Text

BLDG.

AutoCAD SHX Text

CHAFFEE RD.

AutoCAD SHX Text

6 = MECHANICAL NEW WORK PLANS

AutoCAD SHX Text

8 = PLUMBING NEW WORK PLAN

AutoCAD SHX Text

10 = ELECTRICAL NEW WORK PLAN

AutoCAD SHX Text

REVIEWED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

SPEC. #

AutoCAD SHX Text W.O. #

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

NUMBER:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS FORT BLISS, TEXAS

AutoCAD SHX Text

NEW KITCHENETTES BLDG. 2472 ROOMS 121, 2O9 & 309

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

JULY 13, 2026

AutoCAD SHX Text 11B-10114-6P

AutoCAD SHX Text

AutoCAD SHX Text C.R.

AutoCAD SHX Text R.V.

AutoCAD SHX Text C.R.

AutoCAD SHX Text

HAAN RD.

AutoCAD SHX Text

CVRSHT

AutoCAD SHX Text

5 = NEW WORK PLANS

AutoCAD SHX Text

11 = ELECTRICAL NEW WORK PLANS

AutoCAD SHX Text

9 = PLUMBING NEW WORK PLANS

AutoCAD SHX Text

3 = DEMOLITION PLANS

AutoCAD SHX Text

7 = MECHANICAL NEW WORK PLANS

D E S C R

O N

M A R K

D A

D P

R T

AutoCAD SHX Text

DAYROOM

AutoCAD SHX Text

DEMOLITION PLANS

AutoCAD SHX Text

AutoCAD SHX Text A-100

AutoCAD SHX Text

REVIEWED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

SPEC. #

AutoCAD SHX Text W.O. #

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

NUMBER:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS FORT BLISS, TEXAS

AutoCAD SHX Text

NEW KITCHENETTES BLDG. 2472 ROOMS 121, 2O9 & 309

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

JULY 13, 2026

AutoCAD SHX Text 11B-10114-6P

AutoCAD SHX Text

AutoCAD SHX Text C.R.

AutoCAD SHX Text R.V.

AutoCAD SHX Text C.R.

AutoCAD SHX Text

DEMOLITION GENERAL NOTES

AutoCAD SHX Text

DEMOLITION KEYED NOTES

AutoCAD SHX Text

1. CONTRACTOR MUST REVIEW ASBESTOS SURVEY CONTRACTOR MUST REVIEW ASBESTOS SURVEY REPORT AND LEAD BASE PAINT SURVEY REPORT PRIOR TO BID. 2. CONTRACTOR WILL BE RESPONSIBLE FOR AIR CONTRACTOR WILL BE RESPONSIBLE FOR AIR MONITORING & ABATEMENT. ALL REGULATIONS WILL BE MET. 3. CONTRACTOR TO VISIT SITE PRIOR TO BID. CONTRACTOR TO VISIT SITE PRIOR TO BID. 4. THE CONTRACTOR IS RESPONSIBLE TO PROTECT ALL THE CONTRACTOR IS RESPONSIBLE TO PROTECT ALL EXISTING EQUIPMENT, MATERIALS AND FINISHES THAT ARE TO REMAIN WITHOUT UNNECESSARY DAMAGE. ANY DAMAGE TO SAME SHALL BE REPLACED OR RESTORED WITHOUT ADDITIONAL COST TO THE GOVERNMENT. 5. DEMOLISH GYPSUM BOARD AS NEEDED FOR NEW DEMOLISH GYPSUM BOARD AS NEEDED FOR NEW ELECTRICAL CONDUIT, COORDINATE WITH ELECTRICAL.

AutoCAD SHX Text

BLDG. 2472 RM. 121 - DEMOLITION PLAN

AutoCAD SHX Text

SCALE: 1/4"=1'-0"

AutoCAD SHX Text

EDGE OF CEILING.

AutoCAD SHX Text

AutoCAD SHX Text MODIFY REFLECTIVE CEILING SYSTEM AS NEEDED FOR NEW HOODS. SEE MECHANICAL DRAWINGS.

AutoCAD SHX Text

AutoCAD SHX Text REMOVE EXISTING CEILING PANELS TO ALLOW FOR REPLACEMENT. CONTRACTOR TO REMOVE GRID IN AREAS FOR NEW STUD WALL AND NEW RANGE HOOD. REMOVE EXISTING MINI BLINDS AND ALL ASSOCIATED COMPONENTS. REMOVE EXISTING DRINKING FOUNTAIN, PREPARE FOR NEW DRINKING FOUNTAIN.

AutoCAD SHX Text

S C R

O N

M A R K

D A

D P

R T

AutoCAD SHX Text

DEMOLITION PLANS

AutoCAD SHX Text

DEMOLITION GENERAL NOTES

AutoCAD SHX Text

DEMOLITION KEYED NOTES

AutoCAD SHX Text

1. CONTRACTOR MUST REVIEW ASBESTOS SURVEY CONTRACTOR MUST REVIEW ASBESTOS SURVEY REPORT AND LEAD BASE PAINT SURVEY REPORT PRIOR TO BID. 2. CONTRACTOR WILL BE RESPONSIBLE FOR AIR CONTRACTOR WILL BE RESPONSIBLE FOR AIR MONITORING & ABATEMENT. ALL REGULATIONS WILL BE MET. 3. CONTRACTOR TO VISIT SITE PRIOR TO BID. CONTRACTOR TO VISIT SITE PRIOR TO BID. 4. THE CONTRACTOR IS RESPONSIBLE TO PROTECT ALL THE CONTRACTOR IS RESPONSIBLE TO PROTECT ALL EXISTING EQUIPMENT, MATERIALS AND FINISHES THAT ARE TO REMAIN WITHOUT UNNECESSARY DAMAGE. ANY DAMAGE TO SAME SHALL BE REPLACED OR RESTORED WITHOUT ADDITIONAL COST TO THE GOVERNMENT. 5. DEMOLISH GYPSUM BOARD AS NEEDED FOR DEMOLISH GYPSUM BOARD AS NEEDED FOR ELECTRICAL CONDUIT, COORDINATE WITH ELECTRICAL. 6. PROTECT EXISTING COMMUNICATION SERVER IN PROTECT EXISTING COMMUNICATION SERVER IN ROOM 309, PROTECT DURING CONSTRUCTION.

AutoCAD SHX Text

AutoCAD SHX Text EXISTING WALL & BASE CABINETS TO REMAIN. REMOVE ALL DOOR & DRAWER PULLS, HINGES AT BROKEN DOORS (ASSUME 10 ON EACH FLOOR). REMOVE EXISTING COUNTERTOP. REMOVE 50 S.F. OF DAMAGED GYPSUM BOARD. REMOVE EXISTING MINI BLINDS. REMOVE EXISTING WALL BASE. REMOVE EXISTING SINK AND ASSOCIATED PIPE. EXISTING ANSUL SYSTEM TO REMAIN. STRAP AND PROTECT DURING CONSTRUCTION. STOVE TO REMAIN. PROTECT DURING CONSTRUCTION. REMOVE EXISTING DRINKING FOUNTAIN.

AutoCAD SHX Text A-101

AutoCAD SHX Text

BLDG. 2472 RM. 309 - DEMOLITION PLAN

AutoCAD SHX Text

SCALE: 1/4"=1'-0"

AutoCAD SHX Text

BLDG. 2472 RM. 209 - DEMOLITION PLAN

AutoCAD SHX Text

SCALE: 1/4"=1'-0"

AutoCAD SHX Text

DAYROOM

AutoCAD SHX Text

REVIEWED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

SPEC. #

AutoCAD SHX Text W.O. #

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

NUMBER:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS FORT BLISS, TEXAS

AutoCAD SHX Text

NEW KITCHENETTES BLDG. 2472 ROOMS 121, 2O9 & 309

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

JULY 13, 2026

AutoCAD SHX Text 11B-10114-6P

AutoCAD SHX Text

AutoCAD SHX Text C.R.

AutoCAD SHX Text R.V.

AutoCAD SHX Text C.R.

AutoCAD SHX Text

DAYROOM

AutoCAD SHX Text

D E S C R

O N

M A R K

D A

D P

R T

AutoCAD SHX Text 2'-6"

AutoCAD SHX Text 3'-6"

AutoCAD SHX Text 2'-6"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text

DAYROOM

AutoCAD SHX Text

AutoCAD SHX Text 2'-2"

AutoCAD SHX Text

AutoCAD SHX Text 1'-8"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 2'-10"

AutoCAD SHX Text 7'-6"

AutoCAD SHX Text

AutoCAD SHX Text 9"

AutoCAD SHX Text 2'-10"

AutoCAD SHX Text

AutoCAD SHX Text 7'-6"

AutoCAD SHX Text

NEW WORK PLAN & ELEVATIONS

AutoCAD SHX Text

NEW WORK KEYED NOTES

AutoCAD SHX Text

1. UNLESS NOTED OTHERWISE, ALL NEW INTERIOR SURFACES SHALL BE PAINTED. REFERENCE THE ROOM SCHEDULE FOR FINISHES. WALLS, HOLLOW METAL DOORS, ALL DOOR FRAMES. 2. PATCH AND REPAIR ALL AREAS DAMAGED BY DEMOLITION WORK PRIOR TO APPLYING NEW CONSTRUCTION FINISHES. PATCH HOLES IN WOOD WITH A TWO PART EPOXY WOOD FILLER AND PREPARE SURFACE FOR STAIN. 3. EXISTING FINISHES SHALL REMAIN, PROTECT FROM DAMAGE DURING DEMOLITION AND NEW CONSTRUCTION ACTIVITIES. 4. REFERENCE ALL MEP DRAWINGS. REFERENCE ALL MEP DRAWINGS. 5. INSTALL UNDER-CABINET LIGHTING UNDERNEATH ALL INSTALL UNDER-CABINET LIGHTING UNDERNEATH ALL WALL CABINETS. REFERENCE ELECTRICAL DRAWINGS. 6. SEE ROOM FINISH SCHEDULE.SEE ROOM FINISH SCHEDULE.

AutoCAD SHX Text

ROOM FINISH SCHEDULE AND PLUMBING FIXTURES (OR EQUAL)

AutoCAD SHX Text

NEW WORK GENERAL NOTES

AutoCAD SHX Text

BLDG. 2472 RM. 121 - NEW WORK PLAN

AutoCAD SHX Text

SCALE: 1/4"=1'-0"

AutoCAD SHX Text STAINLESS STEEL SINK, WASTE DISPOSER & NEW FAUCET. PROVIDE FAUCET HOLES, SEE PLUMBING DRAWINGS. PROVIDE AND INSTALL RANGE HOOD. REFERENCE MECHANICAL DRAWINGS FOR ADDITIONAL VENTING REQUIREMENTS. MODIFY CEILING SYSTEM AS NEEDED, SEE ROOM FINISH SCHEDULE. ELECTRICAL RANGES & REFRIGERATOR PROVIDED BY GOVERNMENT. NIC. PROVIDE 1" ALUMINUM MINI BLINDS. SEE ROOM FINISH SCHEDULE.

AutoCAD SHX Text

AutoCAD SHX Text 4 1/4" x 12 3/4" TILE W/ RUNNING BOND INSTALLATION. PROVIDE LATICRETE SPECTRALLOCK PRO GROUT PREMIUM IN WHITE. SEE ROOM FINISH SCHEDULE.

AutoCAD SHX Text

CONTINUOUS CAULKING ALONG BACKSPLASH AND COUNTERTOP JOINT.

AutoCAD SHX Text

3/4" THICK SOLID SURFACE-QUARTZ AGGLOMERATE FOR ALL COUNTERTOPS.

AutoCAD SHX Text

12" DEEP WOOD CABINETS, SEE ROOM FINISH SCHEDULE.

AutoCAD SHX Text

24" DEEP WOOD BASE, SEE ROOM & MATERIAL FINISH SCHEDULE.

AutoCAD SHX Text PROVIDE CEILING TILE WITH ARMSTRONG KITCHEN ZONE 672 OR EQUAL. PROVIDE PRELUDE 15/16" SUSPENSION SYSTEM OR EQUAL, AS NECESSARY.

AutoCAD SHX Text

AutoCAD SHX Text NO WORK ON FLOORING, LEAVE EXISTING. CONSTRUCT NEW INTERIOR WALL TO DECK WITH 24 GAUGE 6" METAL STUDS, 16" ON CENTER, R-19 SOUND ATTENUATION BLANKETS IN THE WALL CAVITY AND 5/8" TYPE X MOLD/MOISTURE RESISTANT GYPSUM BOARD EACH SIDE, TAPE, TEXTURE AND PAINT DRYWALL, 2 COATS SEE ROOM FINISH SCHEDULE.

AutoCAD SHX Text

PAINT WALLS, HOLLOW METAL DOORS, AND FRAMES.

AutoCAD SHX Text

AutoCAD SHX Text NEW 4" RESILIANT WALL BASE AT NEW WALL AND OVER BASE CABINET TOE KICK. EXISTING STOVE TO REMAIN. STORE AND PROTECT DURING CONSTRUCTION, 2ND & 3RD LEVELS ONLY. PROVIDE NEW TYPE X" GYPSUM BOARD, 50 S.F., 2ND & 3RD LEVELS ONLY. NEW DRINKING FOUNTAIN, SEE PLUMBING SHEETS. SAND WALL AND BASE CABINETS IN PLACE. APPLY POLYURETHANE STAIN AND TOP COAT COMBO. NEW DOOR & DRAWER PULLS, AND HINGES AT ALL CABINETS.

AutoCAD SHX Text

CABINET ELEVATION

AutoCAD SHX Text

SCALE: 3/8"=1'-0"

AutoCAD SHX Text

(SEE FLOOR PLAN & ROOM FINISH SCHEDULE FOR DETAILS)

AutoCAD SHX Text

CABINET ELEVATION

AutoCAD SHX Text

SCALE: 3/8"=1'-0"

AutoCAD SHX Text

(SEE FLOOR PLAN & ROOM FINISH SCHEDULE FOR DETAILS)

AutoCAD SHX Text A-102

AutoCAD SHX Text

AutoCAD SHX Text A-102

AutoCAD SHX Text

EXISTING CEILING TILE & GRID TO REMAIN.

AutoCAD SHX Text

AutoCAD SHX Text A-102

AutoCAD SHX Text KITCHEN SINK: ASME A112.19.3/CSA B45.4, SINGLE COMPARTMENT, 20 GAGE STAINLESS STEEL WITH INTEGRAL MOUNTING RIM FOR FLUSH INSTALLATION, MINIMUM DIMENSIONS OF 30 INCHES WIDE BY 21 INCHES FRONT TO REAR, WITH UNDERSIDES FULLY SOUND DEADENED, WITH SUPPLY OPENINGS FOR USE WITH TOP MOUNTED WASHERLESS SINK FAUCETS WITH HOSE SPRAY, AND WITH 3.5 INCH DRAIN OUTLET. PROVIDE STAINLESS STEEL DRAIN OUTLETS AND STAINLESS-STEEL CUP STRAINERS. PROVIDE SEPARATE 1.5 INCH P-TRAP AND DRAIN PIPING TO VERTICAL VENT PIPING FROM EACH COMPARTMENT. KITCHEN FAUCET: PROVIDE TOP MOUNTED WASHERLESS SINK FAUCETS WITH HOSE SPRAY. WATER FLOW RATE MUST NOT EXCEED 8.3 L PER MINUTE 2.2 GPM WHEN MEASURED AT A FLOWING WATER PRESSURE OF 414 KPA 60 PSI. PROVIDE AERATOR WITH FAUCET. WASTE DISPOSER: TURBOGRIND MAX 1 HP CONTINUOUS FEED GARBAGE DISPOSAL WITH POWER CORD, UL 430. MODEL #10-US-GB1000-SL. 2800 RPM, 120 V. DRINKING FOUNTAIN: ELKAY MODEL LZS8WSSP, ENHANCED BOTTLE FILLER & SINGLE ADA COOLER REFRIGERATED STAINLESS HIGH CAPACITY LEAD REDUCTION DROP DOWN WRAPPER WITH FILTER.

AutoCAD SHX Text NOTE: ALL MATERIALS SHALL BE SUBMITTED FOR REVIEW AND APPROVAL BY THE DPW COR PRIOR TO INSTALLATION/FABRICATION. FLOORING: TARKETT VCT II 533 ‘TRUE BEIGE’ WB. TRUE BEIGE’ WB. WB. WALL BASE: TARKETT TRADITIONAL WALL BASE 283 ‘TOAST’. TOAST’. . CEILING PAINT COLOR: SHERWIN WILLAMS SW 6126 ‘NAVAJO WHITE’ – EGGSHELL FINISH (AT HARD CEILINGS). NAVAJO WHITE’ – EGGSHELL FINISH (AT HARD CEILINGS). – EGGSHELL FINISH (AT HARD CEILINGS). EGGSHELL FINISH (AT HARD CEILINGS). WALL PAINT COLOR: SHERWIN WILLAMS SW 6126 ‘NAVAJO WHITE’ – EGGSHELL FINISH. NAVAJO WHITE’ – EGGSHELL FINISH. – EGGSHELL FINISH. EGGSHELL FINISH. ACOUSTICAL CEILING TILE: ARMSTRONG ‘KITCHEN ZONE’ 672. KITCHEN ZONE’ 672. 672. CEILING GRID: PRELUDE 15/16-INCH SUSPENSION SYSTEM (AS NEEDED). HOLLOW METAL DOORS & DOOR FRAMES: SHERWIN WILLAMS SW 7513 ‘SANDERLING’ – SEMI-GLOSS FINISH. SANDERLING’ – SEMI-GLOSS FINISH. – SEMI-GLOSS FINISH. SEMI-GLOSS FINISH. CABINET SPECIFICATIONS: OAK WOOD WITH MINWAX ‘HEIRLOOM OAK’ MW 441. HEIRLOOM OAK’ MW 441. MW 441. ALL PLYWOOD CARB COMPLIANT BOX CONSTRUCTION, SOLID 1/2-INCH-THICK ENGINEERED WOOD FOR BACK AND SIDES. SOLID OAK DOOR FRAME WITH 1/2-INCH-THICK OAK CENTER PANEL. SHAKER DOORS WITH 3-INCH-WIDE FRAMES AND FLAT RECESSED CENTER PANELS. 3/4-INCH-THICK OAK ADJUSTABLE SHELVES WITH CLEAR HEAVY DUTY LOCKING SHELF SUPPORTS. 2 FULL DEPTH ADJUSTABLE SHELVES (WALL CABINETS) 1-1/2 DEPTH ADJUSTABLE SHELVES (BASE CABINETS) ALL WALL CABINETS SHALL BE 12 INCHES DEEP. ALL BASE CABINETS SHALL BE 24 INCHES DEEP. ALL BASE CABINETS SHALL HAVE A DRAWER WITH FULL ACCESS HIDDEN GLIDES SYSTEM PROVIDE 2 – 4 DRAWER BASE CABINETS. 4 DRAWER BASE CABINETS. CONCEALED HEAVY DUTY 6-WAY ADJUSTABLE STEEL DOOR HINGES. 2 DOOR BUMPERS PER DOOR/DRAWER. TOE KICK TO MATCH CABINET FINISH. PROVIDE 3-INCH SATIN NICKEL BAR PULLS AT ALL WALL CABINETS, BASE CABINETS AND DRAWERS. COUNTERTOP: 3/4-INCH QUARTZ AGGLOMERATE SOLID SURFACE COUNTERTOP AND 4-INCH BACKSPLASH, HOMOGENEOUS FILLED SOLID POLYMER. ROUND TOP AND BOTTOM EDGE PROFILE. BACKSPLASH TILE: 4-1/4-INCH X 12-3/4-INCH DALTILE MODERN DIMENSIONS, SEMI-GLOSS. COLOR: BISCUIT’ K175 WITH RUNNING BOND INSTALLATION. GROUT: LATICRETE SPECTRALOCK PRO PREMIUM GROUT ‘BRIGHT WHITE’ BRIGHT WHITE’ SEALANT: CLEAR SILICONE SEALANT. PROVIDE CONTINUOUS BEAD OF CAULK WHERE COUNTERTOP AND TILE MEET.

AutoCAD SHX Text

REVIEWED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

SPEC. #

AutoCAD SHX Text W.O. #

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

NUMBER:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS FORT BLISS, TEXAS

AutoCAD SHX Text

NEW KITCHENETTES BLDG. 2472 ROOMS 121, 2O9 & 309

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

JULY 13, 2026

AutoCAD SHX Text 11B-10114-6P

AutoCAD SHX Text

AutoCAD SHX Text C.R.

AutoCAD SHX Text R.V.

AutoCAD SHX Text C.R.

AutoCAD SHX Text

FILLER

AutoCAD SHX Text

TYP.

AutoCAD SHX Text

TYP.

D E S C R

O N

M A R K

D A

D P

R T

AutoCAD SHX Text

BLDG. 2472 RM. 309 - NEW WORK PLAN

AutoCAD SHX Text

SCALE: 1/4"=1'-0"

AutoCAD SHX Text

BLDG. 2472 RM. 209 - NEW WORK PLAN

AutoCAD SHX Text

SCALE: 1/4"=1'-0"

AutoCAD SHX Text

NEW WORK PLANS

AutoCAD SHX Text

1. UNLESS NOTED OTHERWISE, ALL NEW INTERIOR SURFACES SHALL BE PAINTED. REFERENCE THE ROOM SCHEDULE FOR FINISHES. WALLS, DOORS, ALL DOOR FRAMES. 2. PATCH AND REPAIR ALL AREAS DAMAGED BY DEMOLITION WORK PRIOR TO APPLYING NEW CONSTRUCTION FINISHES. PATCH HOLES IN WOOD WITH A TWO PART EPOXY WOOD FILLER AND PREPARE SURFACE FOR STAIN. 3. EXISTING FINISHES SHALL REMAIN, PROTECT FROM DAMAGE DURING DEMOLITION AND NEW CONSTRUCTION ACTIVITIES. 4. REFERENCE ALL MEP DRAWINGS. REFERENCE ALL MEP DRAWINGS. 5. INSTALL UNDER-CABINET LIGHTING UNDERNEATH ALL INSTALL UNDER-CABINET LIGHTING UNDERNEATH ALL WALL CABINETS. REFERENCE ELECTRICAL DRAWINGS. 6. SEE ROOM FINISH SCHEDULE.SEE ROOM FINISH SCHEDULE.

AutoCAD SHX Text

ROOM FINISH SCHEDULE AND PLUMBING FIXTURES (OR EQUAL)

AutoCAD SHX Text

NEW WORK GENERAL NOTES

AutoCAD SHX Text

AutoCAD SHX Text A-103

AutoCAD SHX Text

NEW WORK KEYED NOTES

AutoCAD SHX Text NEW STAINLESS STEEL SINK, WASTE DISPOSER & FAUCET. PROVIDE FAUCET HOLES, SEE PLUMBING DRAWINGS. EXISTING ANSUL SYSTEM SHALL BE SERVICED, CLEANED, INSPECTED AND ALL FILTERS REPLACED BY A CERTIFIED FIRE PROTECTION COMPANY. ELECTRICAL RANGES & REFRIGERATOR PROVIDED BY GOVERNMENT. NIC. PROVIDE 1" ALUMINUM MINI BLINDS. SEE ROOM FINISH SCHEDULE.

AutoCAD SHX Text

AutoCAD SHX Text 4 1/4" x 12 3/4" TILE W/ RUNNING BOND INSTALLATION. PROVIDE LATICRETE SPECTRALLOCK PRO GROUT PREMIUM IN WHITE. SEE ROOM FINISH SCHEDULE.

AutoCAD SHX Text

CONTINUOUS CAULKING ALONG BACKSPLASH AND COUNTERTOP JOINT.

AutoCAD SHX Text

3/4" THICK SOLID SURFACE-QUARTZ AGGLOMERATE FOR ALL COUNTERTOPS.

AutoCAD SHX Text

12" DEEP WOOD CABINETS, SEE ROOM FINISH SCHEDULE.

AutoCAD SHX Text

24" DEEP WOOD BASE, SEE ROOM FINISH SCHEDULE.

AutoCAD SHX Text

PAINT EXISTING CEILING, 2 COATS.

AutoCAD SHX Text

PAINT WALLS, HOLLOW METAL DOORS, AND FRAMES.

AutoCAD SHX Text

DAYROOM

AutoCAD SHX Text

TYP.

AutoCAD SHX Text

DAYROOM

AutoCAD SHX Text

TYP.

AutoCAD SHX Text

PROTECT EXISTING COMM. SERVER

AutoCAD SHX Text

REVIEWED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

SPEC. #

AutoCAD SHX Text W.O. #

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

NUMBER:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS FORT BLISS, TEXAS

AutoCAD SHX Text

NEW KITCHENETTES BLDG. 2472 ROOMS 121, 2O9 & 309

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

JULY 13, 2026

AutoCAD SHX Text 11B-10114-6P

AutoCAD SHX Text

AutoCAD SHX Text C.R.

AutoCAD SHX Text R.V.

AutoCAD SHX Text C.R.

AutoCAD SHX Text

S C R

O N

M A R K

D A

D P

R T

KITCHEN HOOD SCHEDULE

AutoCAD SHX Text

DAYROOM

AutoCAD SHX Text

REVIEWED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

SPEC. #

AutoCAD SHX Text W.O. #

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

NUMBER:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS FORT BLISS, TEXAS

AutoCAD SHX Text

NEW KITCHENETTES BLDG. 2472 ROOMS 121, 2O9 & 309

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

JULY 13, 2026

AutoCAD SHX Text 11B-10114-6P

AutoCAD SHX Text

AutoCAD SHX Text C.R.

AutoCAD SHX Text R.V.

AutoCAD SHX Text C.R.

AutoCAD SHX Text

MECHANICAL NEW WORK PLANS

AutoCAD SHX Text

BLDG. 2472 RM. 121 - MECHANICAL NEW WORK PLAN

AutoCAD SHX Text

SCALE: 1/4"=1'-0"

AutoCAD SHX Text

NEW WORK KEYED NOTES

AutoCAD SHX Text

DEMOLITION GENERAL NOTES

AutoCAD SHX Text

1. CONTRACTOR SHALL FIELD VERIFY EXTENT OF ALL DEMOLITION AND REPORT ALL DISCREPANCIES TO THE GOVERNMENT REPRESENTATIVE PRIOR TO START OF WORK. 2. CONTRACTOR SHALL COMPLY WITH ALL LOCAL, STATE, AND FEDERAL CODES, ORDINANCES, AND REGULATIONS APPLICABLE AT PROJECT LOCATION, CONTRACTOR SHALL FILE AND SECURE ALL APPLICABLE PERMITS, APPROVALS, ETC. 3. ALL EXISTING HVAC EQUIPMENT AND MATERIALS FIXTURES TO BE REMOVED SHALL BE DISPOSED OF PROPERLY AT AN APPROVED OFF SITE LOCATION. 4. CONTRACTOR SHALL TAKE PRECAUTIONS AS NECESSARY TO PROTECT FROM DAMAGING UNDERGROUND WORK, UTILITY LINES, WALKS, LANDSCAPING, ETC. 5. ITEMS INDICATED TO REMAIN SHALL REMAIN IN THE ORIGINAL STATE AS IT WAS PRIOR TO THE START OF CONSTRUCTION. IF ALTERED OR DAMAGED DURING CONSTRUCTION, CONTRACTOR SHALL REPAIR, RESTORE, AND/OR REPLACE ITEMS AS REQUIRED TO RETURN ITEM TO PRE-CONSTRUCTION CONDITIONS. 6. ALL PENETRATIONS REQUIRED FOR MECHANICAL WORK SHALL BE COORDINATED WITH OTHER DISCIPLINES TO ENSURE NO DISCREPANCIES HAVE BEEN OVERLOOKED OR NO DAMAGE OCCURS WHILE PERFORMING THIS WORK. ALL PENETRATIONS SHALL BE REPAIRED AND PATCHED WITH A COMPLETE WATER TIGHT SYSTEM TO MATCH EXISTING WALL OR ROOF. CONTRACTOR SHALL ENSURE NO LEAKS REMAIN IN ANY PENETRATION THROUGH WALL OR ROOF. 7. FIELD VERIFY ALL LOCATIONS OF EQUIPMENT AND MATERIALS FOR ALL HEATING, COOLING AND PLUMBING WORK. VERIFY WITH GOVERNMENT REPRESENTATIVE AND HISTORICAL BRANCH REPRESENTATIVE PRIOR TO MAKING ANY PENETRATIONS THROUGH THE ROOF OR WALLS OF THE BUILDING.

AutoCAD SHX Text PROVIDE NEW STAINLESS STEEL DOUBLE BOWL SINK WITH SPRAYER FOR KITCHEN AREA AS SPECIFIED ON PLUMBING SCHEDULE. PROVIDE NEW FAUCET SUPPLY LINES AND CONNECT HOT AND COLD WATER TO EXISTING VALVES UNDERNEATH CABINET. CONNECT SANITARY SEWER TO EXISTING SANITARY SEWER UNDER CABINETS. ENSURE SINK FUNCTIONS PROPERLY. PROVIDE NEW KITCHEN HOOD AS SPECIFIED IN THE DRAWINGS AND SCHEDULES. DENOTED AS RH-1. KITCHEN HOOD EXHAUST SHALL BE DUCTED FROM THE EXHAUST OF THE HOOD THROUGH CABINETS TO THE VENT ON THE EXTERIOR WALL AS SHOWN IN THE DRAWINGS. DUCTWORK SHALL BE OF INDUSTRIAL GRADE. ENSURE RANGE HOOD FUNCTIONS PROPERLY. PROVIDE NEW SIX INCH ROUND DUCT CONNECTED TO RANGE HOOD THROUGH WALL TO NEW WALL VENT FOR EXTERIOR EXHAUST AS SPECIFIED IN THE DRAWINGS. WALL VENT SHALL MEET SIZE AND AIRFLOW REQUIREMENTS OF THE KITCHEN HOOD AND ACCOMPANYING DUCTWORK. FINISH THE WALL VENT TO MATCH THE EXTERIOR WALL OF THE BUILDING OR AS SPECIFIED BY THE GOVERNMENT REPRESENTATIVE. NEW KITCHEN HOOD.

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

1. SHALL HAVE DEDICATED GFCI OUTLET

AutoCAD SHX Text

2. EXHAUST DUCT IS 8" IN DIAMETER

AutoCAD SHX Text

3. INCLUDE GRAVITY DAMPER

AutoCAD SHX Text

4. PROVIDE PERMATECTOR COATING

AutoCAD SHX Text

NOTES

AutoCAD SHX Text

SONES MIN/MAX

AutoCAD SHX Text

TYPE

AutoCAD SHX Text

MOTOR INPUT POWER

AutoCAD SHX Text

VOLTS

AutoCAD SHX Text

RPM

AutoCAD SHX Text

CFM MIN/ MAX

AutoCAD SHX Text

MODEL

AutoCAD SHX Text

TAG

AutoCAD SHX Text

ELECTRICAL

AutoCAD SHX Text

UNDER CABINET

AutoCAD SHX Text

IKC0I-30-J

AutoCAD SHX Text

500 TO 1350

AutoCAD SHX Text 200W

AutoCAD SHX Text 1,2,3,4

AutoCAD SHX Text

RH-1

AutoCAD SHX Text

MANUFACTURER OR EQUAL

AutoCAD SHX Text

VIKIO

AutoCAD SHX Text M-100

AutoCAD SHX Text

S C R

O N

M A R K

D A

D P

R T

AutoCAD SHX Text

REVIEWED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

SPEC. #

AutoCAD SHX Text W.O. #

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

NUMBER:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS FORT BLISS, TEXAS

AutoCAD SHX Text

NEW KITCHENETTES BLDG. 2472 ROOMS 121, 2O9 & 309

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

JULY 13, 2026

AutoCAD SHX Text 11B-10114-6P

AutoCAD SHX Text

AutoCAD SHX Text C.R.

AutoCAD SHX Text R.V.

AutoCAD SHX Text C.R.

AutoCAD SHX Text

MECHANICAL NEW WORK PLANS

AutoCAD SHX Text

AutoCAD SHX Text M-101

AutoCAD SHX Text

BLDG. 2472 RM. 312 - NEW WORK PLAN

AutoCAD SHX Text

SCALE: 1/4"=1'-0"

AutoCAD SHX Text

BLDG. 2472 RM. 212 - NEW WORK PLAN

AutoCAD SHX Text

SCALE: 1/4"=1'-0"

AutoCAD SHX Text

DAYROOM

AutoCAD SHX Text

DAYROOM

AutoCAD SHX Text

NEW WORK KEYED NOTES

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

S C R

O N

M A R K

D A

D P

R T

AutoCAD SHX Text

DAYROOM

AutoCAD SHX Text

AutoCAD SHX Text X

AutoCAD SHX Text

ARMS ROOM

AutoCAD SHX Text B-4

AutoCAD SHX Text

REVIEWED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

SPEC. #

AutoCAD SHX Text W.O. #

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

NUMBER:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS FORT BLISS, TEXAS

AutoCAD SHX Text

NEW KITCHENETTES BLDG. 2472 ROOMS 121, 2O9 & 309

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

JULY 13, 2026

AutoCAD SHX Text 11B-10114-6P

AutoCAD SHX Text

AutoCAD SHX Text C.R.

AutoCAD SHX Text R.V.

AutoCAD SHX Text C.R.

AutoCAD SHX Text

AutoCAD SHX Text P-100

AutoCAD SHX Text

BLDG. 2472 RM. 121 - PLUMBING NEW WORK PLAN

AutoCAD SHX Text

SCALE: 1/4"=1'-0"

AutoCAD SHX Text

DEMOLITION GENERAL NOTES

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

1. CONTRACTOR SHALL FIELD VERIFY EXTENT OF ALL DEMOLITION AND REPORT ALL DISCREPANCIES TO THE GOVERNMENT REPRESENTATIVE PRIOR TO START OF WORK. 2. CONTRACTOR SHALL COMPLY WITH ALL LOCAL, STATE, AND FEDERAL CODES, ORDINANCES, AND REGULATIONS APPLICABLE AT PROJECT LOCATION, CONTRACTOR SHALL FILE AND SECURE ALL APPLICABLE PERMITS, APPROVALS, ETC. 3. CONTRACTOR SHALL TAKE PRECAUTIONS AS NECESSARY TO PROTECT FROM DAMAGING UNDERGROUND WORK, UTILITY LINES, WALKS, LANDSCAPING, ETC. 4. ITEMS INDICATED TO REMAIN SHALL REMAIN IN THE ORIGINAL STATE AS IT WAS PRIOR TO THE START OF CONSTRUCTION. IF ALTERED OR DAMAGED DURING CONSTRUCTION, CONTRACTOR SHALL REPAIR, RESTORE, AND/OR REPLACE ITEMS AS REQUIRED TO RETURN ITEM TO PRE-CONSTRUCTION CONDITIONS. 5. ALL PENETRATIONS REQUIRED FOR MECHANICAL WORK SHALL BE COORDINATED WITH OTHER DISCIPLINES TO ENSURE NO DISCREPANCIES HAVE BEEN OVERLOOKED OR NO DAMAGE OCCURS WHILE PERFORMING THIS WORK. ALL PENETRATIONS SHALL BE REPAIRED AND PATCHED WITH A COMPLETE WATER TIGHT SYSTEM TO MATCH EXISTING WALL OR ROOF. CONTRACTOR SHALL ENSURE NO LEAKS REMAIN IN ANY PENETRATION THROUGH WALL OR ROOF. PROVIDE FIRESTOPPING MATERIAL AND FIRE CAULKING AT CEILING, WALL AND FLOOR PENETRATIONS. 6. FIELD VERIFY ALL LOCATIONS OF EQUIPMENT AND MATERIALS FOR ALL HEATING, COOLING AND PLUMBING WORK. VERIFY WITH GOVERNMENT REPRESENTATIVE AND HISTORICAL BRANCH REPRESENTATIVE PRIOR TO MAKING ANY PENETRATIONS THROUGH THE ROOF OR WALLS OF THE BUILDING.

AutoCAD SHX Text

1. CONTRACTOR SHALL FIELD VERIFY ALL EXISTING CONDITIONS PRIOR TO STARTING ON THE NEW WORK PORTION OF THE PROJECT. CONTRACTOR SHALL COORDINATE WITH ALL DISCIPLINES TO ENSURE PROPER INSTALLATION. ALL DISCREPANCIES SHALL BE REPORTED TO THE GOVERNMENT REPRESENTATIVE. 2. CONTRACTOR SHALL COMPLY WITH ALL LOCAL, STATE, AND FEDERAL CODES, ORDINANCES, AND REGULATIONS APPLICABLE AT PROJECT LOCATION, CONTRACTOR SHALL FILE AND SECURE ALL APPLICABLE PERMITS, APPROVALS, ETC. 3. CONTRACTOR SHALL PROVIDE ALL PLUMBING FIXTURES SHOWN IN THE DRAWINGS AS SPECIFIED ON PLUMBING SHEETS. 4. CONTRACTOR SHALL PROVIDE ALL CONNECTIONS, SUPPORTS, PEE TRAPS, AND ALL OTHER MATERIALS AND EQUIPMENT TO MEET ALL APPLICABLE COEDS AND REGULATIONS AND TO ENSURE PROPER OPERATIONS OF ALL PLUMBING FIXTURES IN THE BUILDING. 5. CONTRACTOR SHALL PROVIDE CLEAN OUTS OF APPROPRIATE SIZE FOR ALL FIXTURES AS PER ALL APPLICABLE CODES AND REGULATIONS.

AutoCAD SHX Text

CONNECT 1 1/2" VENT TO EXISTING VENT ABOVE CEILING.

AutoCAD SHX Text

CONNECT HOT WATER & COLD WATER TO EXISTING LINES ABOVE CEILING.

AutoCAD SHX Text 1/2"

AutoCAD SHX Text

BLDG. 2476 BASEMENT - PLUMBING NEW WORK PLAN

AutoCAD SHX Text

SCALE: 1/4"=1'-0"

AutoCAD SHX Text

NEW WORK KEYED NOTES

AutoCAD SHX Text

EXISTING 4" C.I. DWV

AutoCAD SHX Text

TIE IN TO EXISTING DWV LINE.

AutoCAD SHX Text

1 1/2" DRAIN FROM 1ST FLOOR.

AutoCAD SHX Text

NEW CABINET W/ SINK.

AutoCAD SHX Text

1 1/2" DIA. VENT LINE.

AutoCAD SHX Text

EXISTING CEILING.

AutoCAD SHX Text

IST FLOOR SPACE

AutoCAD SHX Text

BASEMENT

AutoCAD SHX Text

EXISTING CEILING.

AutoCAD SHX Text

NEW 1/2" DIA. WATER LINES.

AutoCAD SHX Text

EXISTING HOT & COLD DOMESTIC WATER.

AutoCAD SHX Text

2ND FLOOR SPACE

AutoCAD SHX Text

1 1/2" DIA. DRAIN LINE.

AutoCAD SHX Text

NEW VENT LINE THROUGH NEW WALL AND CEILING SPACE.

AutoCAD SHX Text

NEW PARTITION WALL

AutoCAD SHX Text

PROVIDE PEE TRAP

AutoCAD SHX Text

EXISTING 4" DMV C.I. PIPE

AutoCAD SHX Text

CORE DRILL FOR PIPE PENETRATION

AutoCAD SHX Text

DAYROOM

AutoCAD SHX Text

PLUMBING NEW WORK PLANS & SECTION/ELEVATION

AutoCAD SHX Text P-100

AutoCAD SHX Text

BLDG. 2472 - SECTION/ELEVATION

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text KITCHEN SINK: ASME A112.19.3/CSA B45.4, SINGLE COMPARTMENT, 20 GAGE STAINLESS STEEL WITH INTEGRAL MOUNTING RIM FOR FLUSH INSTALLATION, MINIMUM DIMENSIONS OF 30 INCHES WIDE BY 21 INCHES FRONT TO REAR, WITH UNDERSIDES FULLY SOUND DEADENED, WITH SUPPLY OPENINGS FOR USE WITH TOP MOUNTED WASHERLESS SINK FAUCETS WITH HOSE SPRAY, AND WITH 3.5 INCH DRAIN OUTLET. PROVIDE STAINLESS STEEL DRAIN OUTLETS AND STAINLESS-STEEL CUP STRAINERS. PROVIDE SEPARATE 1.5 INCH P-TRAP AND DRAIN PIPING TO VERTICAL VENT PIPING FROM EACH COMPARTMENT. KITCHEN FAUCET: PROVIDE TOP MOUNTED WASHERLESS SINK FAUCETS WITH HOSE SPRAY. WATER FLOW RATE MUST NOT EXCEED 8.3 L PER MINUTE 2.2 GPM WHEN MEASURED AT A FLOWING WATER PRESSURE OF 414 KPA 60 PSI. PROVIDE AERATOR WITH FAUCET. WASTE DISPOSER: TURBOGRIND MAX 1 HP CONTINUOUS FEED GARBAGE DISPOSAL WITH POWER CORD, UL 430. MODEL #10-US-GB1000-SL. 2800 RPM, 120V. DRINKING FOUNTAIN: ELKAY MODEL LZS8WSSP, ENHANCED BOTTLE FILLER & SINGLE ADA COOLER REFRIGERATED STAINLESS HIGH CAPACITY LEAD REDUCTION DROP DOWN WRAPPER WITH FILTER.

AutoCAD SHX Text

PLUMBING FIXTURE SCHEDULE

AutoCAD SHX Text

S C R

O N

M A R K

D A

D P

R T

AutoCAD SHX Text

DAYROOM

AutoCAD SHX Text

DAYROOM

AutoCAD SHX Text

REVIEWED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

SPEC. #

AutoCAD SHX Text W.O. #

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

NUMBER:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS FORT BLISS, TEXAS

AutoCAD SHX Text

NEW KITCHENETTES BLDG. 2472 ROOMS 121, 2O9 & 309

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

JULY 13, 2026

AutoCAD SHX Text 11B-10114-6P

AutoCAD SHX Text

AutoCAD SHX Text C.R.

AutoCAD SHX Text R.V.

AutoCAD SHX Text C.R.

AutoCAD SHX Text

BLDG. 2472 RM. 309 - NEW WORK PLAN

AutoCAD SHX Text

SCALE: 1/4"=1'-0"

AutoCAD SHX Text

BLDG. 2472 RM. 209 - NEW WORK PLAN

AutoCAD SHX Text

SCALE: 1/4"=1'-0"

AutoCAD SHX Text

PLUMBING NEW WORK PLANS

AutoCAD SHX Text

NEW WORK KEYED NOTES

AutoCAD SHX Text

DEMOLITION GENERAL NOTES

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

1. CONTRACTOR SHALL FIELD VERIFY EXTENT OF ALL DEMOLITION AND REPORT ALL DISCREPANCIES TO THE GOVERNMENT REPRESENTATIVE PRIOR TO START OF WORK. 2. CONTRACTOR SHALL COMPLY WITH ALL LOCAL, STATE, AND FEDERAL CODES, ORDINANCES, AND REGULATIONS APPLICABLE AT PROJECT LOCATION, CONTRACTOR SHALL FILE AND SECURE ALL APPLICABLE PERMITS, APPROVALS, ETC. 3. CONTRACTOR SHALL TAKE PRECAUTIONS AS NECESSARY TO PROTECT FROM DAMAGING UNDERGROUND WORK, UTILITY LINES, WALKS, LANDSCAPING, ETC. 4. ITEMS INDICATED TO REMAIN SHALL REMAIN IN THE ORIGINAL STATE AS IT WAS PRIOR TO THE START OF CONSTRUCTION. IF ALTERED OR DAMAGED DURING CONSTRUCTION, CONTRACTOR SHALL REPAIR, RESTORE, AND/OR REPLACE ITEMS AS REQUIRED TO RETURN ITEM TO PRE-CONSTRUCTION CONDITIONS. 5. ALL PENETRATIONS REQUIRED FOR MECHANICAL WORK SHALL BE COORDINATED WITH OTHER DISCIPLINES TO ENSURE NO DISCREPANCIES HAVE BEEN OVERLOOKED OR NO DAMAGE OCCURS WHILE PERFORMING THIS WORK. ALL PENETRATIONS SHALL BE REPAIRED AND PATCHED WITH A COMPLETE WATER TIGHT SYSTEM TO MATCH EXISTING WALL OR ROOF. CONTRACTOR SHALL ENSURE NO LEAKS REMAIN IN ANY PENETRATION THROUGH WALL OR ROOF. 6. FIELD VERIFY ALL LOCATIONS OF EQUIPMENT AND MATERIALS FOR ALL HEATING, COOLING AND PLUMBING WORK. VERIFY WITH GOVERNMENT REPRESENTATIVE AND HISTORICAL BRANCH REPRESENTATIVE PRIOR TO MAKING ANY PENETRATIONS THROUGH THE ROOF OR WALLS OF THE BUILDING.

AutoCAD SHX Text

1. CONTRACTOR SHALL FIELD VERIFY ALL EXISTING CONDITIONS PRIOR TO STARTING ON THE NEW WORK PORTION OF THE PROJECT. CONTRACTOR SHALL COORDINATE WITH ALL DISCIPLINES TO ENSURE PROPER INSTALLATION. ALL DISCREPANCIES SHALL BE REPORTED TO THE GOVERNMENT REPRESENTATIVE. 2. CONTRACTOR SHALL COMPLY WITH ALL LOCAL, STATE, AND FEDERAL CODES, ORDINANCES, AND REGULATIONS APPLICABLE AT PROJECT LOCATION, CONTRACTOR SHALL FILE AND SECURE ALL APPLICABLE PERMITS, APPROVALS, ETC. 3. CONTRACTOR SHALL PROVIDE ALL PLUMBING FIXTURES SHOWN IN THE DRAWINGS AS SPECIFIED 0N PLUMBING SHEETS. 4. CONTRACTOR SHALL PROVIDE ALL CONNECTIONS, SUPPORTS, PEE TRAPS, AND ALL OTHER MATERIALS AND EQUIPMENT TO MEET ALL APPLICABLE CODES AND REGULATIONS AND TO ENSURE PROPER OPERATIONS OF ALL NEWLY INSTALLED PLUMBING FIXTURES. 5. CONTRACTOR SHALL PROVIDE CLEAN OUTS OF APPROPRIATE SIZE FOR ALL FIXTURES AS PER ALL APPLICABLE CODES AND REGULATIONS.

AutoCAD SHX Text

AutoCAD SHX Text P-101

AutoCAD SHX Text

PLUMBING FIXTURE SCHEDULE

AutoCAD SHX Text

AutoCAD SHX Text KITCHEN SINK: ASME A112.19.3/CSA B45.4, SINGLE COMPARTMENT, 20 GAGE STAINLESS STEEL WITH INTEGRAL MOUNTING RIM FOR FLUSH INSTALLATION, MINIMUM DIMENSIONS OF 30 INCHES WIDE BY 21 INCHES FRONT TO REAR, WITH UNDERSIDES FULLY SOUND DEADENED, WITH SUPPLY OPENINGS FOR USE WITH TOP MOUNTED WASHERLESS SINK FAUCETS WITH HOSE SPRAY, AND WITH 3.5 INCH DRAIN OUTLET. PROVIDE STAINLESS STEEL DRAIN OUTLETS AND STAINLESS-STEEL CUP STRAINERS. PROVIDE SEPARATE 1.5 INCH P-TRAP AND DRAIN PIPING TO VERTICAL VENT PIPING FROM EACH COMPARTMENT. KITCHEN FAUCET: PROVIDE TOP MOUNTED WASHERLESS SINK FAUCETS WITH HOSE SPRAY. WATER FLOW RATE MUST NOT EXCEED 8.3 L PER MINUTE 2.2 GPM WHEN MEASURED AT A FLOWING WATER PRESSURE OF 414 KPA 60 PSI. PROVIDE AERATOR WITH FAUCET. WASTE DISPOSER: TURBOGRIND MAX 1 HP CONTINUOUS FEED GARBAGE DISPOSAL WITH POWER CORD, UL 430. MODEL #10-US-GB1000-SL. 2800 RPM, 120V. DRINKING FOUNTAIN: ELKAY MODEL LZS8WSSP, ENHANCED BOTTLE FILLER & SINGLE ADA COOLER REFRIGERATED STAINLESS HIGH CAPACITY LEAD REDUCTION DROP DOWN WRAPPER WITH FILTER.

AutoCAD SHX Text

S C R

O N

M A R K

D A

D P

R T

AutoCAD SHX Text

DAYROOM

AutoCAD SHX Text

AutoCAD SHX Text G

AutoCAD SHX Text

REVIEWED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

SPEC. #

AutoCAD SHX Text W.O. #

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

NUMBER:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS FORT BLISS, TEXAS

AutoCAD SHX Text

NEW KITCHENETTES BLDG. 2472 ROOMS 121, 2O9 & 309

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

JULY 13, 2026

AutoCAD SHX Text 11B-10114-6P

AutoCAD SHX Text

AutoCAD SHX Text C.R.

AutoCAD SHX Text R.V.

AutoCAD SHX Text C.R.

AutoCAD SHX Text

ELECTRICAL DEMOLITION & NEW WORK PLANS

AutoCAD SHX Text

DEMOLITION GENERAL NOTES

AutoCAD SHX Text

AutoCAD SHX Text E-100

AutoCAD SHX Text

BLDG. 2472 RM. 121 - NEW WORK PLAN

AutoCAD SHX Text

SCALE: 1/4"=1'-0"

AutoCAD SHX Text

RANGE

AutoCAD SHX Text

UNDER CABINET LIGHTING & POWER SYSTEM, TYP.

AutoCAD SHX Text

1. REMOVE 120V DUPLEX RECEPTACLES ALONG WALL TO REMOVE 120V DUPLEX RECEPTACLES ALONG WALL TO RECEIVE NEW RANGES. 2. PULL CKTS BACK TO JUNCTION POINT, WHERE PULL CKTS BACK TO JUNCTION POINT, WHERE REQUIRED. VERIFY PANEL SCHEDULE. 3. UTILIZE EXISTING 20A FEEDER FOR NEW UTILIZE EXISTING 20A FEEDER FOR NEW UNDER-CABINET LIGHTING & POWER SYSTEM AT THE RANGE COUNTERS. 4. EXISTING LIGHT SWITCH AND LIGHTING SCHEME TO EXISTING LIGHT SWITCH AND LIGHTING SCHEME TO REMAIN. ADJUST LIGHT AND DIFFUSER LOCATIONS WHERE NEW WALLS ARE LOCATED. 5. EXTEND EXISTING CONDUIT WHERE REQUIRED.

AutoCAD SHX Text

NEW WORK GENERAL NOTES

AutoCAD SHX Text

EXISTING PANEL "1A"

AutoCAD SHX Text

1. PANEL 1C-A: NEW FLUSH MOUNTED 100A 120/208V 3P 4W MLO 12 CKT PANEL 1C-A: NEW FLUSH MOUNTED 100A 120/208V 3P 4W MLO 12 CKT PANELBOARD. NEMA-1 ENCLOSURE. BREAKERS AS SHOWN. CUT OUT DRYWALL WHERE REQUIRED. PATCH/PAINT DRYWALL TO MATCH EXISTING. 2. NEW 20A FEEDER FOR NEW ABOVE THE COUNTER RECEPTACLES W/GFCI AT NEW 20A FEEDER FOR NEW ABOVE THE COUNTER RECEPTACLES W/GFCI AT SINK COUNTER. NEW 20A SINGLE POLE BREAKER. NEW 120V 20A DUPLEX RECEPTACLES, 6" ABOVE COUNTER AT SINK. ONE RECEPTACLE W/GFCI AND FEED DOWNSTREAM. ALL RECEPTACLES WITHIN 6 FEET OF THE KITCHEN SINK TO BE GFCI PROTECTED. 3. NEW 20A FEEDER FOR NEW RECEPTACLE AT ISLAND COUNTERTOP. NEW 20A NEW 20A FEEDER FOR NEW RECEPTACLE AT ISLAND COUNTERTOP. NEW 20A SINGLE POLE BREAKER. NEW 120V, 20A DUPLEX RECEPTACLE, 6" BELOW COUNTER AT SHORT EDGE OF ISLAND. RECEPTACLE W/ GFI. FEED FROM PANEL BA IN BASEMENT. VERIFY BREAKER PLACEMENT/INSTALLATION WITH DPW-ESD. 4. NEW NEMA-14 125/250V 50A RECEPTACLE, 18" AFF, AT RANGE LOCATIONS. NEW NEMA-14 125/250V 50A RECEPTACLE, 18" AFF, AT RANGE LOCATIONS. TWO (2) NEW 50A 2-POLE BREAKERS, 50A FEEDERS 5. NEW RANGE CONTROL CONTACTORS INSTALLED, AS ACCESSIBLE, ABOVE NEW RANGE CONTROL CONTACTORS INSTALLED, AS ACCESSIBLE, ABOVE CEILING. FEED RANGE RECEPTACLES. 6. NEW 120V 20A DUPLEX RECEPTACLE INSIDE CABINET SPACE ABOVE EACH NEW 120V 20A DUPLEX RECEPTACLE INSIDE CABINET SPACE ABOVE EACH RANGE HOOD. NEW 20A SINGLE POLE BREAKER, 20A FEEDER FOR BOTH HOODS. 7. NEW UNDER-CABINET LIGHTING & POWER SYSTEM. NEW 20A NEW UNDER-CABINET LIGHTING & POWER SYSTEM. NEW 20A BREAKER/FEEDER. FEEDER TO RUN CONCEALED IN STUD PARTITION, METAL OUTLET BOX WITH RING AT FIELD VERIFIED LOCATION FOR PROPER INSTALLATION OF SYSTEM. 1 CONTROL BOX W/DIMMER, 1 DUPLEX RECEPTACLE AND 1 LED LIGHT FIXTURE PER SECTION. UNDER-CABINET LIGHTING & POWER SYSTEM ONLY AT SECTION OF COUNTER SPACE, I.E. NOT AT RANGE/HOOD SPACE. 8. FEEDERS: 20A - 3-#12 1/2" C (OR AS REQUIRED) FEEDERS: 20A - 3-#12 1/2" C (OR AS REQUIRED) 50A - 2-#8, 2-#10 3/4" C 60A- 4-#4, 1#8 1 1/4” C C 9. RANGE CONTROL CONTACTOR: FULL VOLTAGE CONTACTOR, 2-POLE (MIN), RANGE CONTROL CONTACTOR: FULL VOLTAGE CONTACTOR, 2-POLE (MIN), 240V (MIN), 50A (MIN) CONTINUOUS CURRENT RATING. 120V COIL. NEMA-1 ENCLOSURE. 10. LEGRAND ADORNE UNDER-CABINET LIGHTING & POWER SYSTEM. LEGRAND ADORNE UNDER-CABINET LIGHTING & POWER SYSTEM. CONTROL BOX WITH PADDLE DIMMER SWITCH, OR APPROVED EQUAL. MODULAR TRACK 18" MODULAR TRACK, 1-15A 120V RECEPTACLE AND ONE BLANK PER MODULE, W/EXTENDERS LIGHTING: LED LINEAR LIGHT W/LED LIGHT EXTENDER COLOR: TITANIUM 11. CONDUCTORS TO BE CU. THHN-THWN. CONDUIT TO BE EMT CONDUCTORS TO BE CU. THHN-THWN. CONDUIT TO BE EMT W/COMPRESSION FITTINGS ONLY, FLEXIBLE METAL CONDUIT WHERE REQUIRED. METAL OUTLET/JUNCTION BOXES ONLY. FEEDERS TO BE RUN ABOVE EXISTING SUSPENDED CEILING. 12. ALL NEW RECEPTACLES FLUSH MOUNTED. ANCHOR BOXES TO ALL NEW RECEPTACLES FLUSH MOUNTED. ANCHOR BOXES TO STUDS/FRAMING. CUT OUT DRYWALL WHERE REQUIRED. PATCH/PAINT DRYWALL TO MATCH EXISTING. 13.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Jul 23, 2026.