dtr_part_iv_app_r.pdf

Defense Transportation Regulation – Part IV 13 March 2020 Personal Property

IV-R-1

APPENDIX R

BACKGROUND AND TECHNICAL DETAILS FOR 2-DIMENSIONAL (2D)

SYMBOLOGY ON THE PERSONAL PROPERTY MILITARY SHIPPING LABEL

(MSL)

A. TRANSPORTATION PROCESSING

1. Advance Transportation Control and Movement Document (ATCMD) Available. The MSL 2D symbol improves the accuracy of transportation in-check when ATCMD data is available in the

Automated Information System (AIS) being used to process the cargo.

a. When the ATCMD data is available in the AIS, three TCMD bar code data points are used from the MSL 2D symbol of each shipment unit (SU) to complete the in-check: the

Transportation Control Number (TCN) of the SU, the piece number, and the consignee agents’ Department of Defense Activity Address Code (DODAAC).

b. To meet this requirement, the MSL 2D symbol label must contain the International Standards

Organization (ISO)/International Engineering Consortium (IEC) 15418 (American National

Standards Institute [ANSI] Materials Handling [MH] 10.8.2) Data Identifiers (DI), Department of Defense Data Element Identifiers (DEI), and related data that are mapped to the source document header TCMD prime data.

2. ATCMD Not Available. When ATCMD data are not available, the 2D symbol is also intended to improve the speed and accuracy of transportation in-check by the processing activity. The MSL

2D symbol is intended to provide selected MSL and TCMD data to resolve a “no-hit” situation that occurs during shipment in-check when header ATCMD prime and/or trailer data are not available.

3. Reprint MSL. The 2D symbol can also serve as a data file to assist in reprinting a label that has been damaged or for printing a new label when information changes. The MSL 2D symbol will contain information that is human readable on the MSL. The 2D symbol may contain TCMD coded information that will have to be converted to in-the-clear text for printing on the MSL (e.g., deletion of leading zeros from pieces, weight, cube; conversion of date/times codes to in-the-clear text; or conversion of mode code to text).

B. EXPLANATION OF MSL 2D PORTABLE DATA FILE 417 (PDF417) SYMBOL

STRUCTURE FOR CODING MSL TEXT AND TCMDS

1. Each SU must be marked with a 2D symbol shipping label and the 2D symbol will contain the data elements from Table R-2, which provides the content of the data streams for personal property MSLs. The data elements include MSL information and prime TCMD header data

(T_1) with the respective trailer data (T_5, T_8, T_9) for an export shipment. See this

Regulation, Part II, Appendix X, for detailed descriptions of DI/DEIs.

2. All SU data in the MSL 2D symbol replicate data from the Transportation Operational Personal

Property Standard System or from shipment information entered in-the-clear on the MSL.

3. When an MSL 2D symbol is generated in accordance with Table R-2, it does not need to include data elements that are blank.

4. Explanation of Table R-2.

a. Compliance Indicator (Column 1) shows the special formatting characters associated with the

ISO/IEC 15434 (MHIA MH10.8.3) data format. The Compliance Indicator will be the first

IV-R-2

three characters in the Message Header. The Compliance Indicator will be [)> (left bracket, right parenthesis, and greater than).

b. Element Separators (Column 2), shows the separator or terminal code that is for that particular part of the data stream. The Format Trailer Character (RS) will be used at the end of the Message Header (before a format series) and at the end of each format series of data

(before the next series of data). The Data Element Separator (GS) separates data elements within each format series of the data table. The Message Trailer (EOT) identifies the end of the message within the data stream (see Table R-1).

c. Format Header (Column 3) is a two-digit numeric identifier “06” or “07” which identifies the rules governing the message format. It is followed by Format 06/07 data qualifiers (DIs or

DEIs in Columns 4 and 5, respectively), which define data content within the message.

d. Data Field (Column 6) contains the description of the data field.

e. Data Format Type/Length (Column 7) contains indicators of whether the data is alpha and/or numeric and the length of the actual data represented by this field (e.g., an5). A convention of “an..25” means a variable length data string of up to 25 alphanumeric characters, where

“an25” means a fixed length of precisely 25 alphanumeric characters. A convention of

“an13..15” means a minimum of 13 characters and a maximum of 15 characters. The plus symbol (+) is used to show concatenated data fields within a DI/DEI string and it may or may not be part of the data sub-string. When specifically identified by a note in the Data Format column, the plus symbol (+) becomes part of the data sub-string to separate different types of data that are encoded within a single field (e.g., DIs 2L, 3L, and 5L). Variable length fields are not zero-filled unless the information is extracted from an external data source that requires leading zeros.

f. Sample Data (Column 8) contains sample data for the field indicated.

5. Data entries for listed DIs/DEIs are mandatory if:

a. The text is shown on the MSL for a respective DI/DEI.

b. The data is available from the shipment unit TCMD.

C. PDF417 SYMBOL FORMAT COMPLIANCE REQUIREMENTS AS REFERENCED IN

MHIA MH10.8.1 AND ISO/IEC 15434 (MHIA MH10.8.3)

1. The narrow element dimension (“X” dimension) range will be from 0.010 to 0.017 inches (10 to

17 mils).

2. The minimum bar height of an element will be three times the “X” dimension width.

3. The symbol will not exceed 2.4 inches to include the quiet zone as described in MHIA MH10.8.1.

4. The symbol will be printed with no more than 12 data columns in width. A PDF417 symbol includes a start pattern, a left row indicator column, one or more data columns, a right row indicator column, and a stop pattern. The start and stop patterns appear to be wide and narrow vertical lines on each end. The indicator and data columns appear to be checkered patterns separated by single vertical lines.

5. The symbol will have a minimum quiet zone of 0.04 inches above, below, to the left, and to the right.

6. An error correction level of five will be used.

7. ISO/IEC 15438 Automatic Identification and Data Capture Techniques – Bar Code Symbology

Specification – PDF417 and ISO/IEC 15416 Automatic Identification and Data Capture

IV-R-3

Techniques – Bar Code Print Quality Test Specification – Linear Symbols will be used to determine a minimum symbol print grade of 2.5/10/660, where:

a. Print quality grade 2.5 (B) at point of printing

b. Measurement aperture = 0.010 inches

a. Light source wavelength = 660 nanometers (nm) ± 10 nm.

Table R-1. Excerpt from Subset of ASCII/ISO 646 (Table of Hexadecimal and Decimal Values)

ASCII/ISO 646 HEX DEC

R S 1E 30

G S 1D 29

EOT 04 04

Table R-2. Personal Property Shipping Label 2D Symbol Format

C o m p li a n c e

In d ic a to r

E le m e n t

S e p a ra to rs

F o rm a t H e a d e r

F o rm a t

D I

F o rm a t

D E

I

Data Field Data Format Type/Length

Sample Data without

DI/DEI

[)> Message Header Compliance

Indicator

RS 06 Data Identifier Format Header

GS JKUSM TCN an17 F1096305469621JXX

GS 3D Ship Date an4 1090

GS 2K Bill of Lading an..12 M1234567

GS 9K TAC an4 FZZZ

GS 12K Personal Property

SCAC

an4 XYZW

GS 2L Ship To Address an..35+an..35+an..35+an..35+an..35

See Note 1

1st address line+2nd address line+3rd address line+4th address line+5th address line

GS 3L From Address an..35+an..35+an..35

See Note 1

1st address line+2nd address line+3rd address line

GS 5L Consignee Address an..35+an..35+an..35+an..35+an..35

See Note 1

1st address line+2nd address line+3rd address line+4th address line+5th address line

GS 2Q Weight (shipment piece) an..5+../an2

See Note 2

GS 11Q Tare Weight an..5+../an2 40

IV-R-4

C o m p li a n ic a to r

E le m e n t

S e p a ra rm a t H e a d e r

F o rm a t

D I

F o rm a t

D E

I

Data Field Data Format Type/Length

Sample Data without

DI/DEI

GS 13Q Piece Number/Total Pieces an..4/an..4 1/4

GS 17V CAGE Code – Consignor an5 6R517

RS 07 Free Text Format Header

GS 12 Cube (shipment piece) an..4+../an2

See Note 2

GS 15 Water Commodity/ Special Handling

Codes an5 390Z9

GS 23 Air Dimension Code an1 A

GS 25 POE Code an3 DOV

GS 26 POD Code an3 RMS

GS 27 Consignee DODAAC an6 FB5612

GS 28 Transportation Priority n1 2

GS 29 Consignor DODAAC an6 FB4407

GS 30 Method Code an1 P

GS 32 RDD an..3 118

GS 34 TCMD/Manifest Doc ID Code

(header DIC only) an3 TF1

GS 35 Free Text Comment an..60 Free text up to 60 characters

GS 45 Owner’s Last Name an..13 Smith

GS 46 Owner’s First and Middle Initials an..2 JB

GS 47 Owner’s Grade an2 O5

GS 48 Type Service an..10 TGBL UB

GS 49 Air Commodity/ Special Handling

Codes an2 JZ

GS 50 Type Pack Code an2 MW

GS 69 Personal Property Code an1 B

GS 70 Net Weight an..5+../an2 310

GS 71 POV Model Year n2 05

GS 72 POV Make a4 MERC

GS 73 POV State of Registration a2 VA

IV-R-5

C o m p li a n ic a to r

E le m e n t

S e p a ra rm a t H e a d e r

F o rm a t

D I

F o rm a t

D E

I

Data Field Data Format Type/Length

Sample Data without

DI/DEI

GS 74 POV License Number an..8 PAE8393X

GS 75 POV Vehicle Color a3 BLK

RS

EOT

NOTE 1. The plus symbol (+) is used as a delimiter between the data elements and is part of the data sub-string.

NOTE 2. To accommodate current automated information systems, U.S. default values are assumed as shown. Metric data values may be used in the 2D symbol for generic cargo shipment descriptions, but the data values must be marked with the metric units of measure from the ANSI X12.3 code list 355. The ANSI X12.3 codes selected for use are: KG = kilograms, CM = centimeter, CC = cubic centimeter, MR = meter, CR = cubic meter. Decimal values are allowed in the 2D symbol. Human-readable values printed on the DoD MSL will be in U.S. standard unit of measure format and will be rounded to the next higher whole number with leading zeros suppressed.

IV-R-6

THIS PAGE INTENTIONALLY LEFT BLANK