A001_Suiattle.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

N/A

PAGE

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE NO. 5. PROJECT NO. (If applicable)

A001 June 13, 2013 N/A WA FS ERFO 071-2023 Suiattle River Road MP 6.0 – MP 14.4

Combined Projects

6. ISSUED BY CODE N/A 7. ADMINISTERED BY (If other than Item 6) CODE N/A

Department of Transportation Federal Highway Administration 610 East Fifth Street Vancouver WA 98661-3801

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and Zip Code) 9A. AMENDMENT OF SOLICITATION NO.

X

DTFH70-13-B-00009

9B. DATED (SEE ITEM 11)

June 5, 2013

10A. MODIFICATION OF CONTRACT/ORDER NO.

N/A

10B. DATED (SEE ITEM 13)

CODE: N/A FACILITY CODE: N/A N/A

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

| X | The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers (__ ) is extended, ( x ) is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

N/A

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A THIS CHANGE ORDER IS ISSUED PURSUANT TO (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN

ITEM 10A.

N/A

B THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (Such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

N/A

C THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

N/A

D OTHER (Specify type of modification and authority) N/A

E. IMPORTANT: Contractor n/a is not, n/a is required to sign this document and return n/a copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

WA FS ERFO 071-2023, SUIATTLE RIVER ROAD MP 6.0 – MP 14.4 COMBINED PROJECTS

See page 2 for revisions.

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15a. NAME AND TITLE OF SIGNER (Type or print) 15a. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

N/A

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

BY_________________________________________ BY N/A___________________________ N/A (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITION NOT USABLE

30-105 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

Amendment No. A001, dated June 13, 2013 WA FS ERFO 071-2023 Solicitation No. DTFH70-13-B-00009 Suiattle River Road MP 6.0 – MP 14.4 Page 2 Combined Projects

REVISIONS ARE AS FOLLOWS:

BID SCHEDULE

Page A-9. Revises quantity for pay item 20401-0000 Roadway Excavation Page A-9. Revises quantity for pay item 20402-0000 Subexcavation Page A-9. Revises quantity for pay item 20411-0000 Select Borrow Page A-9. Revises quantity for pay item 20701-1000 Earthwork Geotextile, Type III-A (non-woven Page A-9. Revises quantity for pay item 20703-2000 Geogrid, Biaxial Page A-10. Revises quantity for pay item 30802-2000 Roadway Aggregate, Method 2 Page A-10. Revises quantity for pay item 40301-0000 Hot Asphalt Concrete Pavement Page A-12. Revises fixed hourly rate for 63509-1000 Temporary Traffic Control, Flagger

CONTRACT CLAUSES

Page C-74. Revises Clause 52.236-4 Physical Data to show that earthwork and cross-sections have been revised.

NOTE: If you previously ordered the Physical Data CD, we will send you an updated version with the revised earthwork and cross-section files. If you have not ordered the Physical Data CD previously and would like to do so now, please use the updated form posted with this amendment.

MINIMUM WAGE SCHEDULE

Page D-1 through D-40. Updates Davis-Bacon General Wage Decision Number WA1 to current effective date of June 7, 2013.

PLANS

Plan sheets #B.1 Revises quantity for pay item 20401-0000 Roadway Excavation Plan sheets #B.1 Revises quantity for pay item 20402-0000 Subexcavation Plan sheets #B.1 Revises quantity for pay item 20411-0000 Select Borrow Plan sheets #B.1 Revises quantity for pay item 20701-1000 Earthwork Geotextile, Type III-A (non-woven Plan sheets #B.1 Revises quantity for pay item 20703-2000 Geogrid, Biaxial Plan sheets #B.2 Revises quantity for pay item 30802-2000 Roadway Aggregate, Method 2 Plan sheets #B.2 Revises quantity for pay item 40301-0000 Hot Asphalt Concrete Pavement

Plan sheet #C.1 Revises Pavement Structure Quantities Plan sheet #C.2 Revises typical section No. 2, Curve Widening Table and clearing limits on

Detail E

Plan sheet #D.1 Revises Roadway Quantities Plan sheet #D.3 Revises Stationing on Plan and quantities on Profile Plan sheet #D.4 Revises quantities on Profile

Notice to Bidders: Please submit revised pages A-7 through A-12 with your bid.

Amendment No. A001, dated June 13, 2013 WA FS ERFO 071-2023 Solicitation No. DTFH70-13-B-00009 Suiattle River Road MP 6.0 – MP 14.4 Page 3 Combined Projects

ENCLOSURES

Pages:

A-7 through A-12 C-74 D-1 through D-40

Plan Sheets:

B.1 through B.2 C.1 through C.2 D.1 D.3 through D.4

Posted Separately: Amended Physical Data Request Form

A - 7

Bidders please note: Before preparing the bid, carefully read the Solicitation Provisions.

Insert a unit bid price, in figures, for each pay item for which a quantity appears in the bid schedule. Multiply the unit bid price by the quantity for each pay item and show the amount bid. Should any mathematical check made by the Government show a mistake in the amount bid, the Amount Bid for the item will be based on the Unit Bid Price.

When a "LPSM" (Lump Sum) appears as a unit bid price, insert an amount for each lump sum pay item.

When a sum based on a fixed rate appears for any pay item in the amount bid column, include the Government inserted amount bid for the item in the total bid amount.

Total the amounts bid for all pay items and insert the total bid amount.

Bid Schedule

Project No:WA FS ERFO 071-2023

Project Name:Suiattle River Road MP 6.0 - MP 14.4 Combined Projects

A - 8

Contract Quantity Pay Items

25201-1000 SPECIAL ROCK EMBANKMENT, MECHANICALLY-PLACED

Amendment Item No. Pay Item No. Description Quantity Unit Unit Price Amount

A0020 15101-0000 MOBILIZATION

ALL LPSM $___LPSM_____ $____________

A0040 15201-0000 CONSTRUCTION SURVEY AND STAKING

ALL LPSM $___LPSM_____ $____________

A0060 15301-0010 CONTRACTOR QUALITY CONTROL AND ASSURANCE

ALL LPSM $___LPSM_____ $____________

A0080 15401-0000 CONTRACTOR TESTING

ALL LPSM $___LPSM_____ $____________

A0100 15501-0000 CONSTRUCTION SCHEDULE

ALL LPSM $___LPSM_____ $____________

A0120 15702-2000 SOIL EROSION CONTROL, TURBIDITY MONITORING

ALL LPSM $___LPSM_____ $____________

A0140 15703-1500 SOIL EROSION CONTROL, TEMPORARY SOIL TACKIFIER

8.0 ACRE $____________ $____________

A0160 15705-1300 SOIL EROSION CONTROL, TEMPORARY DIVERSION CHANNEL

940 LNFT $____________ $____________

A0180 15705-1500 SOIL EROSION CONTROL, SEDIMENT WATTLE

28,400 LNFT $____________ $____________

A0200 15801-0000 WATERING FOR DUST CONTROL

4,000 MGAL $____________ $____________

A0220 20101-0000 CLEARING AND GRUBBING

11.0 ACRE $____________ $____________

A0240 20104-0000 CLEARING

0.7 ACRE $____________ $____________

A0260 20301-0600 REMOVAL OF CATTLE GUARD

1 EACH $____________ $____________

Bid Schedule Schedule:A Schedule Type:Base

A - 9

A0280 20301-1100 REMOVAL OF GATE

1 EACH $____________ $____________

A0300 20301-2400 REMOVAL OF SIGN

1 EACH $____________ $____________

A001 A0320 20401-0000 ROADWAY EXCAVATION

36,330 CUYD $____________ $____________

A001 A0340 20402-0000 SUBEXCAVATION

940 CUYD $____________ $____________

A001 A0360 20411-0000 SELECT BORROW

18,400 TON $____________ $____________

A0380 20425-1000 DITCH, EXCAVATION , OUTLET DITCH

310 LNFT $____________ $____________

A0400 20425-1000 DITCH, EXCAVATION , CHANNEL MODIFIFICATION

145 LNFT $____________ $____________

A0420 20501-0000 CONTROLLED BLAST HOLE

2,015 LNFT $____________ $____________

A0440 20701-0100 EARTHWORK GEOTEXTILE, TYPE I-A (NON-WOVEN)

870 SQYD $____________ $____________

A001 A0460 20701-1000 EARTHWORK GEOTEXTILE, TYPE III-A (NON-WOVEN)

29,100 SQYD $____________ $____________

A001 A0480 20703-2000 GEOGRID, BIAXIAL

4,220 SQYD $____________ $____________

A0500 21101-1000 ROADWAY OBLITERATION, METHOD 1

10,000 SQYD $____________ $____________

A0520 25101-3000 PLACED RIPRAP, CLASS 3 , HEADWALL

133 CUYD $____________ $____________

A0540 25101-4000 PLACED RIPRAP, CLASS 4 , ROCK ARMOR

515 CUYD $____________ $____________

Bid Schedule Schedule:A Schedule Type:Base

A - 10

A0560 25101-4000 PLACED RIPRAP, CLASS 4 , CHANNEL PROTECTION

170 CUYD $____________ $____________

A0580 25101-4000 PLACED RIPRAP, CLASS 4 , ENERGY DISSIPATOR

60 CUYD $____________ $____________

A0600 25120-1000 RIPRAP DITCH, CLASS 1

4,750 LNFT $____________ $____________

A0620 25201-1000 SPECIAL ROCK EMBANKMENT, MECHANICALLY-PLACED

328 CUYD $____________ $____________

A0640 30503-0000 AGGREGATE-TOPSOIL COURSE

3 CUYD $____________ $____________

A001 A0660 30802-2000 ROADWAY AGGREGATE, METHOD 2

7,970 TON $____________ $____________

A001 A0680 40301-0000 HOT ASPHALT CONCRETE PAVEMENT

1,090 TON $____________ $____________

A0700 60201-0800 24-INCH PIPE CULVERT

710 LNFT $____________ $____________

A0720 60201-1000 36-INCH PIPE CULVERT

120 LNFT $____________ $____________

A0740 60202-0800 48-INCH EQUIVALENT DIAMETER ARCH OR ELLIPTICAL PIPE CULVERT

105 LNFT $____________ $____________

A0760 60202-1200 72-INCH EQUIVALENT DIAMETER ARCH OR ELLIPTICAL PIPE CULVERT

60 LNFT $____________ $____________

A0780 60202-1300 78-INCH EQUIVALENT DIAMETER ARCH OR ELLIPTICAL PIPE CULVERT

140 LNFT $____________ $____________

A0800 60413-0000 TRENCH DRAIN , GRATED BOX CULVERT

90 LNFT $____________ $____________

A0820 61902-1400 GATE, METAL, 16 FEET WIDTH

2 EACH $____________ $____________

Bid Schedule Schedule:A Schedule Type:Base

A - 11

A0840 62201-0200 DUMP TRUCK, 8 CUBIC YARD MINIMUM CAPACITY

60 HOUR $____________ $____________

A0860 62201-1250 BULLDOZER, 120HP MINIMUM FLYWHEEL POWER

40 HOUR $____________ $____________

A0880 62201-3150 HYDRAULIC EXCAVATOR, CRAWLER MOUNTED, 1.0 CUBIC YARD MINIMUM

CAPACITY WITH THUMB ATTACHMENT

60 HOUR $____________ $____________

A0900 62201-3750 CHAIN SAW , 24-INCH MINIMUM BAR LENGTH (WITHOUT OPERATOR)

20 HOUR $____________ $____________

A0920 62301-0000 GENERAL LABOR

90 HOUR $____________ $____________

A0940 62406-0300 PLACING CONSERVED TOPSOIL, 4-INCH DEPTH

8.0 ACRE $____________ $____________

A0960 62501-0000 TURF ESTABLISHMENT

9.1 ACRE $____________ $____________

A0980 62901-1100 ROLLED EROSION CONTROL PRODUCT, TYPE 4

250 SQYD $____________ $____________

A1000 63302-0000 SIGN SYSTEM

18.75 SQFT $____________ $____________

A1020 63309-0900 DELINEATOR, TYPE FLEXIBLE

15 EACH $____________ $____________

A1040 63401-0300 PAVEMENT MARKINGS, TYPE B, SOLID , SOLID YELLOW EDGE LINE

10,200 LNFT $____________ $____________

A1060 63401-0300 PAVEMENT MARKINGS, TYPE B, SOLID , SOLID WHITE EDGE LINE

10,200 LNFT $____________ $____________

A1080 63502-1200 TEMPORARY TRAFFIC CONTROL, TUBULAR MARKER, TYPE 28-INCH

42 EACH $____________ $____________

Bid Schedule Schedule:A Schedule Type:Base

A - 12

A1100 63503-1000 TEMPORARY TRAFFIC CONTROL, PLASTIC FENCE , ORANGE

8,500 LNFT $____________ $____________

A1120 63504-1000 TEMPORARY TRAFFIC CONTROL, CONSTRUCTION SIGN

123.00 SQFT $____________ $____________

A001 A1140 63509-1000 TEMPORARY TRAFFIC CONTROL, FLAGGER

100 FXHR $55.00 $5,500.00

A1160 64706-1000 MITIGATION, WETLANDS MITIGATION , CREATION

6,300 SQYD $____________ $____________

Submitted by:____________________________________ Schedule Total:____________

Bid Schedule Schedule:A Schedule Type:Base

C-74

Contract Clauses

WA FS ERFO 071-2023, SUIATTLE RIVER ROAD MP 6.0-MP 14.4, COMBINED PROJECTS

(2) GeoTech Report 08-09, FR-26 Suiattle River Road Emergency Repairs, MP 6.0, MP 12.6 to 13.5, and MP 20.8 sites

(3) GeoTech Report 08-09, Supplemental Geotechnical Recommendations MP 12.6 to 13.5 site.

(4) GeoTech Memo 24-11, Geotechnical Recommendations, Suiattle River Road MP 6.

(5) Earthwork data listing end areas, adjusted volumes, and mass ordinates. (Revised by A001)

(6) Plotted cross-sections of earthwork. (Revised by A001)

52.236-5 Material and Workmanship (Apr 1984)

(a) All equipment, material, and articles incorporated into the work covered by this contract shall be new and of the most suitable grade for the purpose intended, unless otherwise specifically provided in this contract. References in the specifications to equipment, material, articles, or patented processes by trade name, make, or catalog number, shall be regarded as establishing a standard of quality and shall not be construed as limiting competition. The Contractor may, at its option, use any equipment, material, article, or process that, in the judgment of the Contracting Officer, is equal to that named in the specifications, unless otherwise specifically provided in this contract.

(b) The Contractor shall obtain the Contracting Officer’s approval of the machinery and mechanical and other equipment to be incorporated into the work. When requesting approval, the Contractor shall furnish to the Contracting Officer the name of the manufacturer, the model number, and other information concerning the performance, capacity, nature, and rating of the machinery and mechanical and other equipment. When required by this contract or by the Contracting Officer, the Contractor shall also obtain the Contracting Officer’s approval of the material or articles which the Contractor contemplates incorporating into the work. When requesting approval, the Contractor shall provide full information concerning the material or articles. When directed to do so, the Contractor shall submit samples for approval at the Contractor’s expense, with all shipping charges prepaid. Machinery, equipment, material, and articles that do not have the required approval shall be installed or used at the risk of subsequent rejection.

(c) All work under this contract shall be performed in a skillful and workmanlike manner. The Contracting Officer may require, in writing, that the Contractor remove from the work any employee the Contracting Officer deems incompetent, careless, or otherwise objectionable.

52.236-6 Superintendence by the Contractor (Apr 1984)

At all times during performance of this contract and until the work is completed and accepted, the Contractor shall directly superintend the work or assign and have on the worksite a competent superintendent who is satisfactory to the Contracting Officer and has authority to act for the Contractor.

52.236-7 Permits and Responsibilities (Nov 1991)

The Contractor shall, without additional expense to the Government, be responsible for obtaining any necessary licenses and permits, and for complying with any Federal, State, and municipal laws, codes, and regulations applicable to the performance of the work. The Contractor shall also be responsible for all damages to persons or property that occur as a result of the Contractor’s fault or negligence. The Contractor shall also be responsible for all materials delivered and work performed until completion and acceptance of the entire work, except for any completed unit of work which may have been accepted under the contract.

52.236-8 Other Contracts (Apr 1984)

The Government may undertake or award other contracts for additional work at or near the site of the work under this contract. The Contractor shall fully cooperate with the other contractors and with Government employees and shall carefully adapt scheduling and performing the work under this contract

Revised by Amendment A001

D-1

Wage Determination REVISED BY AMENDMENT A001

General Decision Number: WA130001 06/07/2013 WA1

Superseded General Decision Number: WA20120001

State: Washington

Construction Type: Highway

Counties: Washington Statewide.

HIGHWAY (Excludes D.O.E. Hanford Site in Benton and Franklin Counties)

Modification Number Publication Date 0 01/04/2013 1 01/11/2013 2 01/18/2013 3 02/01/2013 4 02/08/2013 5 02/15/2013 6 02/22/2013 7 03/08/2013 8 03/15/2013 9 03/22/2013 10 04/05/2013 11 04/12/2013 12 04/19/2013 13 05/10/2013 14 06/07/2013

CARP0001-008 09/01/2009

Rates Fringes

Carpenters:

COLUMBIA RIVER AREA -

ADAMS, BENTON, COLUMBIA,

DOUGLAS (EAST OF THE 120TH

MERIDIAN), FERRY,

FRANKLIN, GRANT, OKANOGAN

(EAST OF THE 120TH

MERIDIAN) AND WALLA WALLA

COUNTIES

GROUP 1:...................$ 27.73 10.56

GROUP 2:...................$ 29.73 10.56

GROUP 3:...................$ 28.00 10.56

GROUP 4:...................$ 27.73 10.56

GROUP 5:...................$ 63.50 10.56

GROUP 6....................$ 30.75 10.56

GROUP 7....................$ 31.75 10.56

GROUP 8....................$ 28.00 10.56

GROUP 9....................$ 33.75 10.56

SPOKANE AREA: ASOTIN,

GARFIELD, LINCOLN, PEND

OREILLE, SPOKANE, STEVENS

AND WHITMAN COUNTIES

D-2

Wage Determination REVISED BY AMENDMENT A001

GROUP 1:...................$ 26.06 10.56

GROUP 2:...................$ 28.06 10.56

GROUP 3:...................$ 26.32 10.56

GROUP 4:...................$ 26.06 10.56

GROUP 5:...................$ 60.14 10.56

GROUP 6:...................$ 29.07 10.56

GROUP 7....................$ 30.07 10.56

GROUP 8....................$ 27.32 10.56

GROUP 9....................$ 33.07 10.56

CARPENTER & DIVER CLASSIFICATIONS:

GROUP 1: Carpenter

GROUP 2: Millwright, machine erector

GROUP 3: Piledriver - includes driving, pulling, cutting, placing collars, setting, welding, or creosote treated material, on all piling

GROUP 4: Bridge carpenters

GROUP 5: Diver Wet

GROUP 6: Diver Tender, Manifold Operator, ROV Operator

GROUP 7: Diver Standby, Bell/Vehicle or Submersible operator Not Under Pressure

GROUP 8: Assistant Tender, ROV Tender/Technician

GROUP 9: Manifold Operator-Mixed Gas

ZONE PAY:

ZONE 1 0-40 MILES FREE

ZONE 2 41-65 MILES $2.25/PER HOUR

ZONE 3 66-100 MILES $3.25/PER HOUR

ZONE 4 OVER 100 MILES $4.75/PER HOUR

DISPATCH POINTS:

CARPENTERS/MILLWRIGHTS: PASCO (515 N Neel Street) or Main Post Office of established residence of employee (Whichever is closest to the worksite).

CARPENTERS/PILEDRIVER: SPOKANE (127 E. AUGUSTA AVE.) or Main Post Office of established residence of employee (Whichever is closest to the worksite).

CARPENTERS: WENATCHEE (27 N. CHELAN) or Main Post Office of established residence of employee (Whichever is closest to the worksite).

CARPENTERS: COEUR D' ALENE (1839 N. GOVERNMENT WAY) or Main Post Office of established residence of employee (Whichever is closest to the worksite).

D-3

Wage Determination REVISED BY AMENDMENT A001

CARPENTERS: MOSCOW (302 N. JACKSON) or Main Post Office of established residence of employee (Whichever is closest to the worksite).

DEPTH PAY FOR DIVERS BELOW WATER SURFACE:

50-100 feet $2.00 per foot 101-150 feet $3.00 per foot 151-220 feet $4.00 per foot 221 feet and deeper $5.00 per foot

PREMIUM PAY FOR DIVING IN ENCLOSURES WITH NO VERTICAL ASCENT:

0-25 feet Free 26-300 feet $1.00 per Foot

SATURATION DIVING:

The standby rate applies until saturation starts. The saturation diving rate applies when divers are under pressure continuously until work task and decompression are complete. the diver rate shall be paid for all saturation hours.

WORK IN COMBINATION OF CLASSIFICATIONS:

Employees working in any combination of classifications within the diving crew (except dive supervisor) in a shift are paid in the classification with the highest rate for that shift.

HAZMAT PROJECTS:

Anyone working on a HAZMAT job (task), where HAZMAT certification is required, shall be compensated at a premium, in addition to the classification working in as follows:

LEVEL D + $.25 per hour - This is the lowest level of protection. No respirator is used and skin protection is minimal.

LEVEL C + $.50 per hour - This level uses an air purifying respirator or additional protective clothing.

LEVEL B + $.75 per hour - Uses same respirator protection as Level A. Supplied air line is provided in conjunction with a chemical "splash suit".

LEVEL A +$1.00 per hour - This level utilizes a fully encapsulated suit with a self-contained breathing apparatus or a supplied air line.

CARP0003-006 10/01/2011

SOUTHWEST WASHINGTON: CLARK, COWLITZ, KLICKITAT,

LEWIS(Piledriver only), PACIFIC (South of a straight line made by extending the north boundary line of Wahkiakum County west to Willapa Bay to the Pacific Ocean), SKAMANIA AND WAHKIAKUM COUNTIES and INCLUDES THE ENTIRE PENINSULA WEST OF WILLAPA BAY

D-4

Wage Determination REVISED BY AMENDMENT A001

SEE ZONE DESCRIPTION FOR CITIES BASE POINTS

ZONE 1:

Rates Fringes

Carpenters:

CARPENTERS..................$ 32.04 14.18

DIVERS TENDERS..............$ 36.34 14.18

DIVERS......................$ 77.08 14.18

DRYWALL.....................$ 27.56 14.18

MILLWRIGHTS.................$ 32.19 14.18

PILEDRIVERS.................$ 33.04 14.18

DEPTH PAY:

50 TO 100 FEET $1.00 PER FOOT OVER 50 FEET

101 TO 150 FEET $1.50 PER FOOT OVER 101 FEET

151 TO 200 FEET $2.00 PER FOOT OVER 151 FEET

Zone Differential (Add up Zone 1 rates):

Zone 2 - $0.85 Zone 3 - 1.25 Zone 4 - 1.70 Zone 5 - 2.00 Zone 6 - 3.00

BASEPOINTS: ASTORIA, LONGVIEW, PORTLAND, THE DALLES, AND

VANCOUVER, (NOTE: All dispatches for Washington State Counties: Cowlitz, Wahkiakum and Pacific shall be from Longview Local #1707 and mileage shall be computed from that point.)

ZONE 1: Projects located within 30 miles of the respective city hall of the above mentioned cities ZONE 2: Projects located more than 30 miles and less than 40 miles of the respective city of the above mentioned cities ZONE 3: Projects located more than 40 miles and less than 50 miles of the respective city of the above mentioned cities ZONE 4: Projects located more than 50 miles and less than 60 miles of the respective city of the above mentioned cities.

ZONE 5: Projects located more than 60 miles and less than 70 miles of the respective city of the above mentioned cities ZONE 6: Projects located more than 70 miles of the respected city of the above mentioned cities

CARP0770-003 07/01/2012

Rates Fringes

Carpenters:

CENTRAL WASHINGTON:

CHELAN, DOUGLAS (WEST OF

THE 120TH MERIDIAN),

KITTITAS, OKANOGAN (WEST

OF THE 120TH MERIDIAN) AND

YAKIMA COUNTIES

D-5

Wage Determination REVISED BY AMENDMENT A001

CARPENTERS ON CREOSOTE

MATERIAL...................$ 25.93 12.60

CARPENTERS.................$ 25.83 12.60

DIVERS TENDER..............$ 39.15 12.60

DIVERS.....................$ 87.20 12.60

MILLWRIGHT AND MACHINE

ERECTORS...................$ 37.07 12.60

PILEDRIVER, DRIVING,

PULLING, CUTTING, PLACING

COLLARS, SETTING, WELDING

OR CRESOTE TREATED

MATERIAL, ALL PILING.......$ 36.22 12.60

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON - ALL

CLASSIFICATIONS EXCEPT MILLWRIGHTS AND PILEDRIVERS

Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the following listed cities:

Seattle Olympia Bellingham Auburn Bremerton Anacortes Renton Shelton Yakima Aberdeen-Hoquiam Tacoma Wenatchee Ellensburg Everett Port Angeles Centralia Mount Vernon Sunnyside Chelan Pt. Townsend

Zone Pay:

0 -25 radius miles Free 26-35 radius miles $1.00/hour 36-45 radius miles $1.15/hour 46-55 radius miles $1.35/hour Over 55 radius miles $1.55/hour

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON - MILLWRIGHT

AND PILEDRIVER ONLY)

Hourly Zone Pay shall be computed from Seattle Union Hall, Tacoma City center, and Everett City center

Zone Pay:

0 -25 radius miles Free 26-45 radius miles $ .70/hour Over 45 radius miles $1.50/hour

CARP0770-006 07/07/2012

Rates Fringes

Carpenters:

WESTERN WASHINGTON:

CLALLAM, GRAYS HARBOR,

ISLAND, JEFFERSON, KING,

KITSAP, LEWIS (excludes piledrivers only), MASON, PACIFIC (North of a

D-6

Wage Determination REVISED BY AMENDMENT A001 straight line made by extending the north boundary line of Wahkiakum County west to the Pacific Ocean), PIERCE, SAN JUAN, SKAGIT, SNOHOMISH, THURSTON AND WHATCOM

COUNTIES

BRIDGE CARPENTERS..........$ 35.39 13.60

CARPENTERS ON CREOSOTE

MATERIAL...................$ 35.49 13.60

CARPENTERS.................$ 35.39 13.60

DIVERS TENDER..............$ 39.15 13.60

DIVERS.....................$ 87.20 13.60

MILLWRIGHT AND MACHINE

ERECTORS...................$ 36.39 13.60

PILEDRIVER, DRIVING,

PULLING, CUTTING, PLACING

COLLARS, SETTING, WELDING

OR CRESOTE TREATED

MATERIAL, ALL PILING.......$ 35.59 13.60

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON - ALL

CLASSIFICATIONS EXCEPT MILLWRIGHTS AND PILEDRIVERS

Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the following listed cities:

Seattle Olympia Bellingham Auburn Bremerton Anacortes Renton Shelton Yakima Aberdeen-Hoquiam Tacoma Wenatchee Ellensburg Everett Port Angeles Centralia Mount Vernon Sunnyside Chelan Pt. Townsend

Zone Pay:

0 -25 radius miles Free 26-35 radius miles $1.00/hour 36-45 radius miles $1.15/hour 46-55 radius miles $1.35/hour Over 55 radius miles $1.55/hour

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON - MILLWRIGHT

AND PILEDRIVER ONLY)

Hourly Zone Pay shall be computed from Seattle Union Hall, Tacoma City center, and Everett City center

Zone Pay:

0 -25 radius miles Free 26-45 radius miles $ .70/hour Over 45 radius miles $1.50/hour

ELEC0046-001 02/04/2013

D-7

Wage Determination REVISED BY AMENDMENT A001

CALLAM, JEFFERSON, KING AND KITSAP COUNTIES

Rates Fringes

CABLE SPLICER....................$ 46.87 3%+15.96

ELECTRICIAN......................$ 42.61 3%+15.96

* ELEC0048-003 01/01/2013

CLARK, KLICKITAT AND SKAMANIA COUNTIES

Rates Fringes

CABLE SPLICER....................$ 41.85 18.44

ELECTRICIAN......................$ 38.05 18.44

HOURLY ZONE PAY:

Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the following listed cities:

Portland, The Dalles, Hood River, Tillamook, Seaside and Astoria

Zone Pay:

Zone 1: 31-50 miles $1.50/hour Zone 2: 51-70 miles $3.50/hour Zone 3: 71-90 miles $5.50/hour Zone 4: Beyond 90 miles $9.00/hour

*These are not miles driven. Zones are based on Delorrne Street Atlas USA 2006 plus.

ELEC0048-029 01/01/2013

COWLITZ AND WAHKIAKUM COUNTY

Rates Fringes

CABLE SPLICER....................$ 41.85 16.39

ELECTRICIAN......................$ 38.05 16.39

ELEC0073-001 07/01/2012

ADAMS, FERRY, LINCOLN, PEND OREILLE, SPOKANE, STEVENS, WHITMAN

COUNTIES

CABLE SPLICER....................$ 31.70 15.39

ELECTRICIAN......................$ 28.82 15.39

ELEC0076-002 09/01/2012

GRAYS HARBOR, LEWIS, MASON, PACIFIC, PIERCE, AND THURSTON

D-8

Wage Determination REVISED BY AMENDMENT A001

CABLE SPLICER....................$ 37.54 21.62

ELECTRICIAN......................$ 34.13 21.62

ELEC0112-005 06/01/2012

ASOTIN, BENTON, COLUMBIA, FRANKLIN, GARFIELD, KITTITAS, WALLA

WALLA, YAKIMA COUNTIES

CABLE SPLICER....................$ 38.83 15.83

ELECTRICIAN......................$ 36.55 16.28

ELEC0191-003 06/01/2012

ISLAND, SAN JUAN, SNOHOMISH, SKAGIT AND WHATCOM COUNTIES

Rates Fringes

CABLE SPLICER....................$ 42.85 15.85

ELECTRICIAN......................$ 39.28 15.85

ELEC0191-004 07/01/2012

CHELAN, DOUGLAS, GRANT AND OKANOGAN COUNTIES

Rates Fringes

CABLE SPLICER....................$ 39.28 15.85

ELECTRICIAN......................$ 35.71 15.85

ENGI0302-003 06/01/2012

CHELAN (WEST OF THE 120TH MERIDIAN), CLALLAM, DOUGLAS (WEST OF

THE 120TH MERIDIAN), GRAYS HARBOR, ISLAND, JEFFERSON, KING,

KITSAP, KITTITAS, MASON, OKANOGAN (WEST OF THE 120TH MERIDIAN),

SAN JUNA, SKAGIT, SNOHOMISH, WHATCOM AND YAKIMA (WEST OF THE

120TH MERIDIAN) COUNTIES

PROJECTS: CATEGORY A PROJECTS (EXCLUDES CATEGORY B PROJECTS, AS

SHOWN BELOW)

Zone 1 (0-25 radius miles):

Power equipment operators:

Group 1A...................$ 36.54 15.90 Group 1AA..................$ 37.11 15.90 Group 1AAA.................$ 37.67 15.90

D-9

Wage Determination REVISED BY AMENDMENT A001

Group 1.....................$ 35.99 15.90 Group 2.....................$ 35.50 15.90 Group 3.....................$ 35.08 15.90 Group 4.....................$ 32.72 15.90

Zone Differential (Add to Zone 1 rates):

Zone 2 (26-45 radius miles) - $1.00 Zone 3 (Over 45 radius miles) - $1.30

BASEPOINTS: Aberdeen, Bellingham, Bremerton, Everett, Kent, Mount Vernon, Port Angeles, Port Townsend, Seattle, Shelton, Wenatchee, Yakima

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1AAA - Cranes-over 300 tons, or 300 ft of boom (including jib with attachments)

GROUP 1AA - Cranes 200 to 300 tons, or 250 ft of boom (including jib with attachments); Tower crane over 175 ft in height, base to boom

GROUP 1A - Cranes, 100 tons thru 199 tons, or 150 ft of boom (including jib with attachments); Crane-overhead, bridge type, 100 tons and over; Tower crane up to 175 ft in height base to boom; Loaders-overhead, 8 yards and over; Shovels, excavator, backhoes-6 yards and over with attachments

GROUP 1 - Cableway; Cranes 45 tons thru 99 tons, under 150 ft of boom (including jib with attachments); Crane-overhead, bridge type, 45 tons thru 99 tons; Derricks on building work; Excavator, shovel, backhoes over 3 yards and under 6 yards; Hard tail end dump articulating off-road equipment 45 yards and over; Loader- overhead 6 yards to, but not including 8 yards; Mucking machine, mole, tunnel, drill and/or shield; Quad 9, HD 41, D-10; Remote control operator on rubber tired earth moving equipment; Rollagon;

Scrapers-self propelled 45 yards and over; Slipform pavers;

Transporters, all truck or track type

GROUP 2 - Barrier machine (zipper); Batch Plant Operaor- Concrete; Bump Cutter; Cranes, 20 tons thru 44 tons with attachments; Crane-overhead, bridge type-20 tons through 44 tons; Chipper; Concrete Pump-truck mount with boom attachment; Crusher; Deck Engineer/Deck Winches (power);

Drilling machine; Excavator, shovel, backhoe-3yards and under; Finishing Machine, Bidwell, Gamaco and similar equipment; Guardrail punch; Horizontal/directional drill operator; Loaders-overhead under 6 yards; Loaders-plant feed; Locomotives-all; Mechanics-all; Mixers-asphalt plant;

Motor patrol graders-finishing; Piledriver (other than crane mount); Roto-mill,roto-grinder; Screedman, spreader, topside operator-Blaw Knox, Cedar Rapids, Jaeger, Caterpillar, Barbar Green; Scraper-self propelled, hard tail end dump, articulating off-road equipment-under 45 yards; Subgrade trimmer; Tractors, backhoes-over 75 hp;

Transfer material service machine-shuttle buggy, blaw

D-10

Wage Determination REVISED BY AMENDMENT A001 knox-roadtec; Truck crane oiler/driver-100 tons and over;

Truck Mount portable conveyor; Yo Yo Pay dozer

GROUP 3 - Conveyors; Cranes-thru 19 tons with attachments;

A-frame crane over 10 tons; Drill oilers-auger type, truck or crane mount; Dozers-D-9 and under; Forklift-3000 lbs.

and over with attachments; Horizontal/directional drill locator; Outside hoists-(elevators and manlifts), air tuggers, strato tower bucket elevators; Hydralifts/boom trucks over 10 tons; Loader-elevating type, belt; Motor patrol grader-nonfinishing; Plant oiler- asphalt, crusher;

Pumps-concrete; Roller, plant mix or multi-lift materials;

Saws-concrete; Scrpers-concrete and carry-all; Service engineer-equipment; Trenching machines; Truck Crane Oiler/Driver under 100 tons; Tractors, backhoe 75 hp and under

GROUP 4 - Assistant Engineer; Bobcat; Brooms; Compressor;

Concrete finish mahine-laser screed; Cranes-A frame-10 tons and under; Elevator and Manlift-permanent or shaft type;

Gradechecker, Stakehop; Forklifts under 3000 lbs. with attachments; Hydralifts/boom trucks, 10 tons and under; Oil distributors, blower distribution and mulch seeding operator; Pavement breaker; Posthole digger, mechanical;

Power plant; Pumps, water; Rigger and Bellman; Roller-other than plant mix; Wheel Tractors, farmall type;

Shotcrete/gunite equipment operator

Category B Projects: 95% of the basic hourly reate for each group plus full fringe benefits applicable to category A projects shall apply to the following projects. A Reduced rates may be paid on the following:

1. Projects involving work on structures such as buildings and bridges whose total value is less than $1.5 million excluding mechanical, electrical, and utility portions of the contract.

2. Projects of less than $1 million where no building is involved. Surfacing and paving included, but utilities excluded.

3. Marine projects (docks, wharfs, etc.) less than $150,000.

HANDLING OF HAZARDOUS WASTE MATERIALS:

Personnel in all craft classifications subject to working inside a federally designated hazardous perimeter shall be elgible for compensation in accordance with the following group schedule relative to the level of hazardous waste as outlined in the specific hazardous waste project site safety plan.

H-1 Base wage rate when on a hazardous waste site when not outfitted with protective clothing

D-11

Wage Determination REVISED BY AMENDMENT A001

H-2 Class "C" Suit - Base wage rate plus $ .25 per hour.

H-3 Class "B" Suit - Base wage rate plus $ .50 per hour.

H-4 Class "A" Suit - Base wage rate plus $ .75 per hour.

Zone Differential (Add to Zone 1 rates):

Zone 2 (26-45 radius miles) - $ .70 Zone 3 (Over 45 radius miles) - $1.00

BASEPOINTS: Aberdeen, Bellingham, Bremerton, Everett, Kent, Mount Vernon, Port Angeles, Port Townsend, Seattle, Shelton, Wenatchee, Yakima

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1AAA - Cranes-over 300 tons, or 300 ft of boom (including jib with attachments)

GROUP 1AA - Cranes 200 to 300 tons, or 250 ft of boom (including jib with attachments); Tower crane over 175 ft in height, base to boom

GROUP 1A - Cranes, 100 tons thru 199 tons, or 150 ft of boom (including jib with attachments); Crane-overhead, bridge type, 100 tons and over; Tower crane up to 175 ft in height base to boom; Loaders-overhead, 8 yards and over; Shovels, excavator, backhoes-6 yards and over with attachments

GROUP 1 - Cableway; Cranes 45 tons thru 99 tons, under 150 ft of boom (including jib with attachments); Crane-overhead, bridge type, 45 tons thru 99 tons; Derricks on building work;

Excavator, shovel, backhoes over 3 yards and under 6 yards;

Hard tail end dump articulating off-road equipment 45 yards and over; Loader- overhead 6 yards to, but not including 8 yards; Mucking machine, mole, tunnel, drill and/or shield;

Quad 9, HD 41, D-10; Remote control operator on rubber tired earth moving equipment; Rollagon; Scrapers-self propelled 45 yards and over; Slipform pavers; Transporters, all truck or track type

GROUP 2 - Barrier machine (zipper); Batch Plant Operaor- Concrete; Bump Cutter; Cranes, 20 tons thru 44 tons with attachments; Crane-overhead, bridge type-20 tons through 44 tons; Chipper; Concrete Pump-truck mount with boom attachment; Crusher; Deck Engineer/Deck Winches (power);

Drilling machine; Excavator, shovel, backhoe-3 yards and under; Finishing Machine, Bidwell, Gamaco and similar equipment; Guardrail punch; Horizontal/directional drill operator; Loaders-overhead under 6 yards; Loaders-plant feed;

Locomotives-all; Mechanics-all; Mixers-asphalt plant; Motor patrol graders-finishing; Piledriver (other than crane mount); Roto-mill,roto-grinder; Screedman, spreader, topside operator-Blaw Knox, Cedar Rapids, Jaeger, Caterpillar, Barbar Green; Scraper-self propelled, hard tail end dump, articulating off-road equipment-under 45 yards; Subgrade

D-12

Wage Determination REVISED BY AMENDMENT A001 trimmer; Tractors, backhoes-over 75 hp; Transfer material service machine-shuttle buggy, blaw knox-roadtec; Truck crane oiler/driver-100 tons and over; Truck Mount portable conveyor; Yo Yo Pay dozer

GROUP 3 - Conveyors; Cranes-thru 19 tons with attachments;

A-frame crane over 10 tons; Drill oilers-auger type, truck or crane mount; Dozers-D-9 and under; Forklift-3000 lbs. and over with attachments; Horizontal/directional drill locator;

Outside hoists-(elevators and manlifts), air tuggers, strato tower bucket elevators; Hydralifts/boom trucks over 10 tons;

Loader-elevating type, belt; Motor patrol grader-nonfinishing; Plant oiler- asphalt, crusher;

Pumps-concrete; Roller, plant mix or multi-lift materials;

Saws-concrete; Scrpers-concrete and carry-all; Service engineer-equipment; Trenching machines; Truck Crane Oiler/Driver under 100 tons; Tractors, backhoe 75 hp and under

GROUP 4 - Assistant Engineer; Bobcat; Brooms; Compressor;

Concrete finish mahine-laser screed; Cranes-A frame-10 tons and under; Elevator and Manlift-permanent or shaft type;

Gradechecker, Stakehop; Forklifts under 3000 lbs. with attachments; Hydralifts/boom trucks, 10 tons and under; Oil distributors, blower distribution and mulch seeding operator;

Pavement breaker; Posthole digger, mechanical; Power plant;

Pumps, water; Rigger and Bellman; Roller-other than plant mix; Wheel Tractors, farmall type; Shotcrete/gunite equipment operator

CATEGORY B PROJECTS: 95% OF THE BASIC HOURLY RATE FOR EACH

GROUP PLUS FULL FRINGE BENEFITS APPLICABLE TO CATEGORY A

PROJECTS SHALL APPLY TO THE FOLLOWING PROJECTS. REDUCED

RATES MAY BE PAID ON THE FOLLOWING:

1. Projects involving work on structures such as buildings and bridges whose total value is less than $1.5 million excluding mechanical, electrical, and utility portions of the contract.

2. Projects of less than $1 million where no building is involved. Surfacing and paving including, but utilities excluded.

3. Marine projects (docks, wharfs, ect.) less than $150,000.

HANDLING OF HAZARDOUS WASTE MATERIALS: Personnel in all craft classifications subject to working inside a federally designed hazardous perimeter shall be elgible for compensation in accordance with the following group schedule relative to the level of hazardous waste as outlined in the specific hazardous waste project site safety plan.

H-1 Base wage rate when on a hazardous waste site when not outfitted with protective clothing.

H-2 Class "C" Suit - Base wage rate plus $.25 per hour.

H-3 Class "B" Suit - Base wage rate plus $.50 per hour.

H-4 Class "A" Suit - Base wage rate plus $.75 per hour.

D-13

Wage Determination REVISED BY AMENDMENT A001

ENGI0370-002 06/01/2012

ADAMS, ASOTIN, BENTON, CHELAN (EAST OF THE 120TH MERIDIAN),

COLUMBIA, DOUGLAS (EAST OF THE 120TH MERIDIAN), FERRY,

FRANKLIN, GARFIELD, GRANT, LINCOLN, OKANOGAN (EAST OF THE 120TH

MERIDIAN), PEND OREILLE, SPOKANE, STEVENS, WALLA WALLA, WHITMAN

AND YAKIMA (EAST OF THE 120TH MERIDIAN) COUNTIES

ZONE 1:

GROUP 1A...................$ 25.21 12.60

GROUP 1.....................$ 25.21 12.60

GROUP 2.....................$ 25.53 12.60

GROUP 3.....................$ 26.14 12.60

GROUP 4.....................$ 26.30 12.60

GROUP 5.....................$ 26.46 12.60

GROUP 6.....................$ 26.74 12.60

GROUP 7.....................$ 27.01 12.60

GROUP 8.....................$ 28.11 12.60

ZONE DIFFERENTIAL (Add to Zone 1 rate): Zone 2 - $2.00

Zone 1: Within 45 mile radius of Spokane, Pasco, Washington;

Lewiston, Idaho

Zone 2: Outside 45 mile radius of Spokane, Pasco, Washington; Lewiston, Idaho

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1A: Boat Operator; Crush Feeder; Oiler; Steam Cleaner

GROUP 1: Bit Grinders; Bolt Threading Machine; Compressors (under 2000 CFM, gas, diesel, or electric power); Deck Hand; Fireman & Heater Tender; Hydro-seeder, Mulcher, Nozzleman; Oiler Driver, & Cable Tender, Mucking Machine;

Pumpman; Rollers, all types on subgrade, including seal and chip coatings (farm type, Case, John Deere & similar, or Compacting Vibrator), except when pulled by Dozer with operable blade; Welding Machine; Crane Oiler-Driver (CLD required) & Cable Tender, Mucking Machine

GROUP 2: A-frame Truck (single drum); Assistant Refrigeration Plant (under 1000 ton); Assistant Plant Operator, Fireman or Pugmixer (asphalt); Bagley or Stationary Scraper; Belt Finishing Machine; Blower Operator (cement); Cement Hog;

Compressor (2000 CFM or over, 2 or more, gas diesel or electric power); Concrete Saw (multiple cut); Distributor Leverman; Ditch Witch or similar; Elevator Hoisting Materials; Dope Pots (power agitated); Fork Lift or Lumber Stacker, hydra-lift & similar; Gin Trucks (pipeline);

Hoist, single drum; Loaders (bucket elevators and

D-14

Wage Determination REVISED BY AMENDMENT A001 conveyors); Longitudinal Float; Mixer (portable-concrete);

Pavement Breaker, Hydra-Hammer & similar; Power Broom;

Railroad Ballast Regulation Operator (self-propelled);

Railroad Power Tamper Operator (self-propelled); Railroad Tamper Jack Operator (self-propelled; Spray Curing Machine (concrete); Spreader Box (self-propelled); Straddle Buggy (Ross & similar on construction job only); Tractor (Farm type R/T with attachment, except Backhoe); Tugger Operator

GROUP 3: A-frame Truck (2 or more drums); Assistant Refrigeration Plant & Chiller Operator (over 1000 ton);

Backfillers (Cleveland & similar); Batch Plant & Wet Mix Operator, single unit (concrete); Belt-Crete Conveyors with power pack or similar; Belt Loader (Kocal or similar);

Bending Machine; Bob Cat (Skid Steer); Boring Machine (earth); Boring Machine (rock under 8 inch bit) (Quarry Master, Joy or similar); Bump Cutter (Wayne, Saginau or similar); Canal Lining Machine (concrete); Chipper (without crane); Cleaning & Doping Machine (pipeline); Deck Engineer; Elevating Belt-type Loader (Euclid, Barber Green & similar); Elevating Grader-type Loader (Dumor, Adams or similar); Generator Plant Engineers (diesel or electric);

Gunnite Combination Mixer & Compressor; Locomotive Engineer; Mixermobile; Mucking Machine; Posthole Auger or Punch; Pump (grout or jet); Soil Stabilizer (P & H or similar); Spreader Machine; Dozer/Tractor (up to D-6 or equivalent) and Traxcavator; Traverse Finish Machine;

Turnhead Operator

GROUP 4: Concrete Pumps (squeeze-crete, flow-crete, pump-crete, Whitman & similar); Curb Extruder (asphalt or concrete); Drills (churn, core, calyx or diamond);

Equipment Serviceman; Greaser & Oiler; Hoist (2 or more drums or Tower Hoist); Loaders (overhead & front-end, under 4 yds. R/T); Refrigeration Plant Engineer (under 1000 ton);

Rubber-tired Skidders (R/T with or without attachments);

Surface Heater & Plant Machine; Trenching Machines (under 7

ft. depth capacity); Turnhead (with re-screening); Vacuum Drill (reverse circulation drill under 8 inch bit)

GROUP 5: Backhoe (under 45,000 gw); Backhoe & Hoe Ram (under 3/4 yd.); Carrydeck & Boom Truck (under 25 tons); Cranes (25 tons & under), all attachments including clamshell, dragline; Derricks & Stifflegs (under 65 tons); Drilling Equipment(8 inch bit & over) (Robbins, reverse circulation & similar); Hoe Ram; Piledriving Engineers; Paving (dual drum); Railroad Track Liner Operaotr (self-propelled);

Refrigeration Plant Engineer (1000 tons & over); Signalman (Whirleys, Highline Hammerheads or similar); Grade Checker

GROUP 6: Asphalt Plant Operator; Automatic Subgrader (Ditches & Trimmers)(Autograde, ABC, R.A. Hansen & similar on grade wire); Backhoe (45,000 gw and over to 110,000 gw); Backhoes & Hoe Ram (3/4 yd. to 3 yd.); Batch Plant (over 4 units);

Batch & Wet Mix Operator (multiple units, 2 & incl. 4);

Blade Operator (motor patrol & attachments); Cable Controller (dispatcher); Compactor (self-propelled with

D-15

Wage Determination REVISED BY AMENDMENT A001 blade); Concrete Pump Boom Truck; Concrete Slip Form Paver;

Cranes (over 25 tons, to and including 45 tons), all attachments including clamshell, dragline; Crusher, Grizzle & Screening Plant Operator; Dozer, 834 R/T & similar; Drill Doctor; Loader Operator (front-end & overhead, 4 yds. incl.

8 yds.); Multiple Dozer Units with single blade; Paving Machine (asphalt and concrete); Quad-Track or similar equipment; Rollerman (finishing asphalt pavement); Roto Mill (pavement grinder); Scrapers, all, rubber-tired;

Screed Operator; Shovel(under 3 yds.); Trenching Machines (7 ft. depth & over); Tug Boat Operator Vactor guzzler, super sucker; Lime Batch Tank Operator (REcycle Train);

Lime Brain Operator (Recycle Train); Mobile Crusher Operator (Recycle Train)

GROUP 7: Backhoe (over 110,000 gw); Backhoes & Hoe Ram (3 yds & over); Blade (finish & bluetop) Automatic, CMI, ABC, Finish Athey & Huber & similar when used as automatic;

Cableway Operators; Concrete Cleaning/Decontamination machine operator; Cranes (over 45 tons to but not including 85 tons), all attachments including clamshell and dragine;

Derricks & Stiffleys (65 tons & over); Elevating Belt (Holland type); Heavy equipment robotics operator; Loader (360 degrees revolving Koehring Scooper or similar);

Loaders (overhead & front-end, over 8 yds. to 10 yds.);

Rubber-tired Scrapers (multiple engine with three or more scrapers); Shovels (3 yds. & over); Whirleys & Hammerheads, ALL; H.D. Mechanic; H.D. Welder; Hydraulic Platform Trailers (Goldhofer, Shaurerly andSimilar); Ultra High Pressure Wateriet Cutting Tool System Operator (30,000 psi); Vacuum Blasting Machine Operator

GROUP 8: Cranes (85 tons and over, and all climbing, overhead,rail and tower), all attachments including clamshell, dragline; Loaders (overhead and front-end, 10 yards and over); Helicopter Pilot

BOOM PAY: (All Cranes, Including Tower) 180 ft to 250 ft $ .50 over scale Over 250 ft $ .80 over scale

NOTE:

In computing the length of the boom on Tower Cranes, they shall be measured from the base of the Tower to the point of the boom.

HAZMAT:

Anyone working on HAZMAT jobs, working with supplied air shall receive $1.00 an hour above classification.

ENGI0612-006 07/01/2012

LEWIS,PIERCE, PACIFIC (portion lying north of a parallel line extending west from the northern boundary of Wahkaikum County to the sea) AND THURSTON COUNTIES

ON PROJECTS DESCRIBED IN FOOTNOTE A BELOW, THE RATE FOR EACH

D-16

Wage Determination REVISED BY AMENDMENT A001

GROUP SHALL BE 90% OF THE BASE RATE PLUS FULL FRINGE BENEFITS.

ON ALL OTHER WORK, THE FOLLOWING RATES APPLY.

Zone 1 (0-25 radius miles):

GROUP 1A...................$ 36.54 15.90

GROUP 1AA..................$ 37.11 15.90

GROUP 1AAA.................$ 37.67 15.90

GROUP 1.....................$ 35.99 15.90

GROUP 2.....................$ 35.50 15.90

GROUP 3.....................$ 35.08 15.90

GROUP 4.....................$ 32.72 15.90

Zone Differential (Add to Zone 1 rates):

Zone 2 (26-45 radius miles) = $ .70 Zone 3 (Over 45 radius miles) - $1.00

BASEPOINTS: CENTRALIA, OLYMPIA, TACOMA

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1 AAA - Cranes-over 300 tons or 300 ft of boom (including jib with attachments)

GROUP 1AA - Cranes- 200 tonsto 300 tons, or 250 ft of boom (including jib with attachments; Tower crane over 175 ft in height, bas to boom

GROUP 1A - Cranes, 100 tons thru 199 tons, or 150 ft of boom (including jib with attachments); Crane-overhead, bridge type, 100 tons and over; Tower crane up to 175 ft in height base to boom; Loaders-overhead, 8 yards and over; Shovels, excavator, backhoes-6 yards and over with attachments

GROUP 1 - Cableway; Cranes 45 tons thru 99 tons under 150 ft of boom (including jib with attachments); Crane-overhead, bridge type, 45 tons thru 99 tons; Derricks on building work; Excavator, shovel, backhoes over 3 yards and under 6 yards; Hard tail end dump articulating off-road equipment 45 yards and over; Loader- overhead, 6 yards to, but not including, 8 yards; Mucking machine, mole, tunnel, drill and/or shield; Quad 9 HD 41, D-10; Remote control operator on rubber tired earth moving equipment; Rollagon; Scrapers-self-propelled 45 yards and over; Slipform pavers;

Transporters, all track or truck type

GROUP 2 - Barrier machine (zipper); Batch Plant Operator-concrete; Bump Cutter; Cranes, 20 tons thru 44 tons with attachments; Crane-Overhead, bridge type, 20 tons through 44 tons; Chipper; Concrete pump-truck mount with boom attachment; Crusher; Deck engineer/deck winches (power);

Drilling machine; Excavator, shovel, backhoe-3 yards and under; Finishing machine, Bidwell, Gamaco and similar

D-17

Wage Determination REVISED BY AMENDMENT A001 equipment; Guardrail punch; Loaders, overhead under 6 yards; Loaders-plant feed; Locomotives-all; Mechanics- all;

Mixers, asphalt plant; Motor patrol graders, finishing;

Piledriver (other than crane mount); Roto-mill, roto-grinder; Screedman, spreader, topside operator-Blaw Knox, Cedar Rapids, Jaeger, Caterpillar, Barbar Green;

Scraper-self- propelled, hard tail end dump, articulating off-road equipment- under 45 yards; Subgrader trimmer;

Tractors, backhoe over 75 hp; Transfer material service machine-shuttle buggy, Blaw Knox- Roadtec; Truck Crane oiler/driver-100 tons and over; Truck Mount Portable Conveyor; Yo Yo pay

GROUP 3 - Conveyors; Cranes through 19 tons with attachments;

Crane-A-frame over 10 tons; Drill oilers-auger type, truck or crane mount; Dozer-D-9 and under; Forklift-3000 lbs. and over with attachments; Horizontal/directional drill locator; Outside Hoists-(elevators and manlifts), air tuggers, strato tower bucket elevators; Hydralifts/boom trucks over 10 tons; Loaders-elevating type, belt; Motor patrol grader-nonfinishing; Plant oiler- asphalt, crusher;

Pump-Concrete; Roller, plant mix or multi-lfit materials;

Saws-concrete; Scrapers, concrete and carry all; Service engineers-equipment; Trenching machines; Truck crane oiler/driver under 100 tons; Tractors, backhoe under 75 hp

GROUP 4 - Assistant Engineer; Bobcat; Brooms; Compressor;

Concrete Finish Machine-laser screed; Cranes A-frame 10 tons and under; Elevator and manlift (permanent and shaft type); Forklifts-under 3000 lbs. with attachments;

Gradechecker, stakehop; Hydralifts/boom trucks, 10 tons and under; Oil distributors, blower distribution and mulch seeding operator; Pavement breaker; Posthole digger-mechanical; Power plant; Pumps-water; Rigger and Bellman; Roller-other than plant mix; Wheel Tractors, farmall…