Drawings.pdf
PDF 559 KB Posted
- Attached to
- UT BOX WELD
- Solicitation number
- SPMYM4-26-Q-37170002
About this file
This document is a technical specification for weld quality inspection using Ultrasonic Testing (UT) for the Pearl Harbor Custom Weld project. The specification includes detailed drawings and defect tolerance requirements for five distinct welded joints connecting carbon steel components.
The document specifies five welded joints with the following characteristics: Joint 01 is a Ground-Flush Corner Weld (C2V.5) connecting PC.1 to PC.2; Joint 02 is a Corner Weld (C2V.2 or C2V.5) connecting PC.2 to PC.3; Joint 03 is a Full-Penetration Tee Weld (T2V.2) connecting PC.1 to PC.4; Joint 04 is a Full-Penetration Tee Weld (T2V.1) connecting PC.3 to PC.4; and Joint 05 is a Butt Weld (B2V.1 or B2V.3) connecting PC.2 to PC.2. All joints are fabricated from carbon steel or equivalent material with a defect tolerance of ±0.05 inches and weld tolerance of ±0.062 inches. Each joint contains specific flaw locations identified in isometric, top, and flaw view drawings, including defects such as lack of fusion (L.O.F.), cracks, slag inclusions, porosity, and lack of penetration (L.O.P.). The document provides comprehensive dimensional specifications, weld detail cross-sections at 45-degree angles, and remarks indicating surface connectivity requirements for select flaws. The drawings are scaled as N/A and presented across five sheets with consistent formatting for quality control and inspection purposes.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPMYM4-26-Q-37170002.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
0.50"
45°
0.06" 0.35"
FLAW 1 - L.O.F. FLAW 3 - L.O.P.FLAW 2 - SLAG FLAW 4 - POROSITY
(LACK OF PENETRATION)
0.08"
.15"
0.10"
0.45"
FLAW 1
.25"
FLAW 2
0.75"
FLAW 3
0.50"
FLAW 5
0.30"
2.00"
3.00"
4.00"
5.75"
FL
AW
V
IE
W
JOINT 02 (SEE SHEET 2 OF 4)
4.00"
8.00"
V
FLAW VIEW
TOP VIEW
WELD DETAIL
ISOMETRIC VIEW
REMARKS:
(PC. 3)
(PC. 1)
ID #: JOINT 01 (PC. 1 TO PC. 2)
MATERIAL: CARBON STEEL, OR EQUIVALENT
DEFECT TOLERANCE: ± 0.05"
SHEET 1 OF 5
WELD TOLERANCE: ± 0.062"
PEARL HARBOR CUSTOM WELD PROP 3 (UT)
JOINT DESIGN: GROUND-FLUSH CORNER WELD (C2V.5)
- FLAW 5 SHALL BE SURFACE CONNECTED BUT NOT OBVIOUSLY VISIBLE.
- THE LIGHT GRAY AREAS IN THE ISOMETRIC VIEW REPRESENT THE JOINT 01 ASSEMBLY.
SCALE: N/A
(PC. 2)
(LACK OF FUSION)
0.05"
0.10"
.35"
FLAW 5 - CRACK
0.08"
FLAW 4
0.30"
6.25"
PC. 2
PC. 1PC. 4
PC. 3
TOP VIEW
45°
0.06" 0.25"
0.13"
FLAW 1 - L.O.F.
(LACK OF FUSION)
FLAW 2 - CRACK FLAW 3 - SLAG
0.50"
0.06" 0.15"
JOINT 01 (SEE SHEET 1 OF 4)
ID #: JOINT 02 (PC. 2 TO PC. 3)
MATERIAL: CARBON STEEL, OR EQUIVALENT
DEFECT TOLERANCE: ± 0.05"
SHEET 2 OF 5
WELD TOLERANCE: ± 0.062"
PEARL HARBOR CUSTOM WELD PROP 3 (UT)
JOINT DESIGN: CORNER WELD (C2V.2)
- FLAW 2 SHALL BE CONNECTED TO A SURFACE BUT OBVIOUSLY VISABLE.
- THE LIGHT GRAY AREAS IN THE ISOMETRIC VIEW REPRESENT THE JOINT 02 ASSEMBLY.
SCALE: N/A
FLAW VIEW
TOP VIEW
WELD DETAIL
ISOMETRIC VIEW
(PC. 3)
(PC. 1)
(PC. 2)
FL
AW
V
IE
W
V
2.15"
3.65"
3.90"
FLAW 1
0.10" FLAW 3
3.15"
8.00"
4.00"
REMARKS:
FLAW 2
0.55"
0.30"
0.08"
PC. 2
PC. 1PC. 4
0.50"
FLAW 1 - L.O.F. FLAW 2 - SLAG FLAW 3 - CRACK
45°
REMARKS:
ID #: JOINT 03 (PC. 1 TO PC. 4)
MATERIAL: CARBON STEEL, OR EQUIVALENT
DEFECT TOLERANCE: ± 0.05"
SHEET 3 OF 5
WELD TOLERANCE: ± 0.062"
PEARL HARBOR CUSTOM WELD PROP 3 (UT)
JOINT DESIGN: FULL-PENETRATION TEE WELD (T2V.2)
- THE LIGHT GRAY AREAS IN THE ISOMETRIC VIEW REPRESENT THE JOINT 03 ASSEMBLY.
SCALE: N/A
FLAW VIEW
TOP VIEW ISOMETRIC VIEW
0 V
PC. 4
PC. 1 PC. 3
10.00"
8.00"
FLAW VIEW JOINT 04 (SEE SHEET 4 OF 4)
0.25"
0.12"
6.30"
2.25"
4.37"
FLAW 2
1.38"
WELD DETAIL
0.06"0.08"
FLAW 1
.20"
FLAW 3
.35"
LACK OF FUSION
PC. 2
PC. 1
PC. 4
0.75"
0.13" 0.50"
0.50"
0.50"
45°
FLAW 3 - CRACKFLAW 1 - SLAG FLAW 2 - L.O.F.
(LACK OF FUSION)
0.19"
REMARKS:
ID #: JOINT 04 (PC. 3 TO PC. 4)
MATERIAL: CARBON STEEL, OR EQUIVALENT
DEFECT TOLERANCE: ± 0.05"
SHEET 4 OF 5
WELD TOLERANCE: ± 0.062"
PEARL HARBOR CUSTOM WELD PROP 4 (UT)
JOINT DESIGN: FULL-PENETRATION TEE WELD (T2V.1)
- FLAW 3 SHALL BE SURFACE CONNECTED BUT NOT OBVIOUSLY VISIBLE.
- THE LIGHT GRAY AREAS IN THE ISOMETRIC VIEW REPRESENT THE JOINT 04 ASSEMBLY.
SCALE: N/A
0 V
FLAW VIEW
1.00"
6.30"
4.75"
FLAW 3
0.35"
FLAW 2
.38"
PC. 4
PC. 1 PC. 3
JOINT 03 (SEE SHEET 3 OF 4)
TOP VIEW ISOMETRIC VIEW
10.00"
8.00"
FLAW VIEW WELD DETAIL
0.10"
0.06"0.08" 0.25"
0.25"
FLAW 1
1.15"
PC. 2
PC. 1
PC. 4
45°
0.06"
FLAW 3 - L.O.F.
(LACK OF FUSION)
FLAW 4 - CRACK FLAW 5 - SLAG
0.10"
JOINT 01 (SEE SHEET 1 OF 5)
ID #: JOINT 05 (PC. 2 TO PC. 2)
MATERIAL: CARBON STEEL, OR EQUIVALENT
DEFECT TOLERANCE: ± 0.05"
SHEET 5 OF 5
WELD TOLERANCE: ± 0.062"
PEARL HARBOR CUSTOM WELD PROP 3 (UT)
JOINT DESIGN: BUTT WELD (B2V.1)
- FLAW S 1 AND 4 SHALL BE SURFACE CONNECTED, BUT NOT OBVIOUSLY VISIBLE. SCALE: N/A
FLAW VIEW
TOP VIEW
WELD DETAIL
ISOMETRIC VIEW
(PC. 3)
(PC. 1)
(PC. 2)
FL
AW
V
IE
W
V
FLAW 4
4.00"
FLAW 5
1.25"
8.00"
4.00"
REMARKS:
0.00"
1.75" 0.50"
0.25"
FLAW 1 - CRACK FLAW 2 - L.O.F.
(LACK OF FUSION)
0.15" 0.08"
0.20" 0.05"
0.06" 0.25"
0.08"
1.25" 3.25" 3.75"
FLAW 2
0.25"
FLAW 1
0.30" FLAW 3
0.25"
5.25"
PC. 2
PC. 1PC. 4
45°
0.06" 0.50"
FLAW 1 - L.O.F. FLAW 3 - L.O.P.FLAW 2 FLAW 4
(LACK OF PENETRATION)
0.10"
.45" 0.08"0.06"
FLAW 1
.25"
FLAW 2
0.75"
FLAW 3
0.30"
FLAW 5
0.40"
1.75"
2.75"
4.20"
5.65"
FL
AW
V
IE
W
JOINT 02 (SEE SHEET 2 OF 4)
4.00"
8.00"
V
FLAW VIEW
TOP VIEW
WELD DETAIL
ISOMETRIC VIEW
REMARKS:
(PC. 3)
(PC. 1)
ID #: JOINT 01 (PC. 1 TO PC. 2)
MATERIAL: CARBON STEEL, OR EQUIVALENT
DEFECT TOLERANCE: ± 0.05"
SHEET 1 OF 5
WELD TOLERANCE: ± 0.062"
PEARL HARBOR CUSTOM WELD PROP 4 (UT)
JOINT DESIGN: GROUND-FLUSH CORNER WELD (C2V.5)
- FLAW 5 SHALL BE SURFACE CONNECTED BUT NOT OBVIOUSLY VISIBLE.
- THE LIGHT GRAY AREAS IN THE ISOMETRIC VIEW REPRESENT THE JOINT 01 ASSEMBLY.
SCALE: N/A
(PC. 2)
(LACK OF FUSION)
0.05" 0.15"
.65"
FLAW 5
0.18"
FLAW 4
0.20"
6.00"
TOE CRACKPOROSITYSLAG
PC. 2
PC. 1PC. 4
45°
0.19"
0.50"
0.13"
FLAW 1 - L.O.F.
(LACK OF FUSION) FLAW 2 - CRACK
FLAW 3 - SLAG
0.25"
0.08"
0.25"
JOINT 01 (SEE SHEET 1 OF 4)
ID #: JOINT 02 (PC. 2 TO PC. 3)
MATERIAL: CARBON STEEL, OR EQUIVALENT
DEFECT TOLERANCE: ± 0.05"
SHEET 2 OF 5
WELD TOLERANCE: ± 0.062"
PEARL HARBOR CUSTOM WELD PROP 4 (UT)
JOINT DESIGN: CORNER WELD (C2V.5)
- FLAW 2 SHALL BE CONNECTED TO A SURFACE BUT NOT OBVIOUSLY VISABLE.
- THE LIGHT GRAY AREAS IN THE ISOMETRIC VIEW REPRESENT THE JOINT 02 ASSEMBLY.
SCALE: N/A
FLAW VIEW
TOP VIEW
WELD DETAIL
ISOMETRIC VIEW
(PC. 3)
(PC. 1)
(PC. 2)
FL
AW
V
IE
W
V
1.75"
3.15"
4.25"
FLAW 1
0.25"
FLAW 4
1.00"
8.00"
4.00"
REMARKS:
FLAW 3
0.19"
0.10" 0.06"
FLAW 1 - L.O.F.
(LACK OF FUSION)
0.13"0.50"
FLAW 2
0.50"
6.35"
PC. 2
PC. 1PC. 4
0.50"
FLAW 2 - L.O.F.FLAW 2 - SLAG FLAW 3 - TRANSVERSE
45°
REMARKS:
ID #: JOINT 03 (PC. 1 TO PC. 4)
MATERIAL: CARBON STEEL, OR EQUIVALENT
DEFECT TOLERANCE: ± 0.05"
SHEET 3 OF 5
WELD TOLERANCE: ± 0.062"
PEARL HARBOR CUSTOM WELD PROP 4 (UT)
JOINT DESIGN: FULL-PENETRATION TEE WELD (T2V.2)
- THE LIGHT GRAY AREAS IN THE ISOMETRIC VIEW REPRESENT THE JOINT 03 ASSEMBLY.
SCALE: N/A
FLAW VIEW
TOP VIEW ISOMETRIC VIEW
0 V
PC. 4
PC. 1 PC. 3
10.00"
8.00"
FLAW VIEW JOINT 04 (SEE SHEET 4 OF 4)
0.15" 0.20"
5.30"
2.00"
3.50"
FLAW 2
0.25"
WELD DETAIL
0.30"0.06"
FLAW 1
4.00"
FLAW 3
0.35"
LACK OF FUSION
0.30"
CRACK
- FLAW NUMBER 3 IS CONNECTED TO THE SURFACE BUT NOT OBVIOUSLY VISIBLE
PC. 2
PC. 1
PC. 4
0.75"
0.13" 0.50"
0.50"
0.50"
45°
FLAW 3 - CRACKFLAW 1 - SLAG FLAW 2 - L.O.F.
(LACK OF FUSION)
0.19"
REMARKS:
ID #: JOINT 04 (PC. 3 TO PC. 4)
MATERIAL: CARBON STEEL, OR EQUIVALENT
DEFECT TOLERANCE: ± 0.05"
SHEET 4 OF 5
WELD TOLERANCE: ± 0.062"
PEARL HARBOR CUSTOM WELD PROP 4 (UT)
JOINT DESIGN: FULL-PENETRATION TEE WELD (T2V.1)
- FLAW 3 SHALL BE SURFACE CONNECTED BUT NOT OBVIOUSLY VISIBLE.
- THE LIGHT GRAY AREAS IN THE ISOMETRIC VIEW REPRESENT THE JOINT 04 ASSEMBLY.
SCALE: N/A
0 V
FLAW VIEW
1.00"
6.30"
4.75"
FLAW 3
0.35"
FLAW 2
.38"
PC. 4
PC. 1 PC. 3
JOINT 03 (SEE SHEET 3 OF 4)
TOP VIEW ISOMETRIC VIEW
10.00"
8.00"
FLAW VIEW WELD DETAIL
0.10"
0.06"0.08" 0.25"
0.25"
FLAW 1
1.15"
PC. 2
PC. 1
PC. 4
45°
FLAW 3 - L.O.F.
(LACK OF FUSION)
FLAW 4 - TRANSVERSE FLAW 5 - SLAG
0.08"
JOINT 01 (SEE SHEET 1 OF 5)
ID #: JOINT 05 (PC. 2 TO PC. 2)
MATERIAL: CARBON STEEL, OR EQUIVALENT
DEFECT TOLERANCE: ± 0.05"
SHEET 5 OF 5
WELD TOLERANCE: ± 0.062"
PEARL HARBOR CUSTOM WELD PROP 4 (UT)
JOINT DESIGN: BUTT WELD (B2V.3) FLUSH GROUND OUTSIDE
- FLAWS 1 AND 4 SHALL BE SURFACE CONNECTED, BUT NOT OBVIOUSLY VISIBLE. SCALE: N/A
FLAW VIEW
TOP VIEW
WELD DETAIL
ISOMETRIC VIEW
(PC. 3)
(PC. 1)
(PC. 2)
FL
AW
V
IE
W
V
FLAW 4
4.00"
FLAW 5
1.25"
8.00"
4.00"
REMARKS:
1.75"
0.50"
FLAW 1 - CRACK FLAW 2 - L.O.F.
(LACK OF FUSION)
0.16" 0.25"
0.20" 0.06"
0.38" 0.25"
0.10"
1.25" 3.25" 3.75"
FLAW 2
0.25"
FLAW 1
0.30" FLAW 3
0.25"
5.25"
0.13"
CRACK
0.08"
JOINT 02 (SEE SHEET 2 OF 5)
PC. 2
PC. 1PC. 4
| MULTI-WELD PROP 3 - Drawing.pdf |
| MULTI-WELD PROP 3 SHEET 1.pdf |
| Sheets and Views |
| MULTI-WELD PROP 3 SHEET 1-PG 1 C2V.2 (flush) |
| MULTI-WELD PROP 3 SHEET 2.pdf |
| Sheets and Views |
| MULTI-WELD PROP 3 SHEET 2-PG 2 - C2V.2 |
| MULTI-WELD PROP 3 SHEET 3.pdf |
| Sheets and Views |
| MULTI-WELD PROP 3 SHEET 3-PG 3 (T2V.2) |
| MULTI-WELD PROP 3 SHEET 4.pdf |
| Sheets and Views |
| MULTI-WELD PROP 3 SHEET 4-PG 4 - T2V.1 |
| MULTI-WELD PROP 3 SHEET 5.pdf |
| Sheets and Views |
| MULTI-WELD PROP 3 SHEET 5-PG 5- B2V.1 |
| MULTI-WELD PROP 4 - Drawing.pdf |
| MULTI-WELD PROP 4 SHEET 1.pdf |
| Sheets and Views |
| MULTI-WELD PROP 4 SHEET 1-PG 1 C2V.5 (flush) |
| MULTI-WELD PROP 4 SHEET 2.pdf |
| Sheets and Views |
| MULTI-WELD PROP 4 SHEET 2-PG 2 - C2V.5 |
| MULTI-WELD PROP 4 SHEET 3.pdf |
| Sheets and Views |
| MULTI-WELD PROP 4 SHEET 3-PG 3 (T2V.2) |
| MULTI-WELD PROP 4 SHEET 4.pdf |
| Sheets and Views |
| MULTI-WELD PROP 4 SHEET 4-PG 4 - T2V.1 |
| MULTI-WELD PROP 4 SHEET 5.pdf |
| Sheets and Views |
| MULTI-WELD PROP 4 SHEET 5-PG 5- B2V.3 |
File details come from the government source that posted it. Updated .