Drawings.pdf
PDF 100 KB Posted
- Attached to
- Composite UHMW/Rubber Rubbing Fenders
- Solicitation number
- W911WN26QA018
About this file
These are technical drawings from the US Army Corps of Engineers Pittsburgh District for two gate fender typical details, dated 3/18/10. The drawings specify detailed dimensions and construction requirements for two different gate fenders:
- 56' Gate Fender (Drawing #SN519): Dimensions are 6½" × 5⅛", with a 3" UHMW section, 2" rubber section, and a ½" bevel. 2. 84' Gate Fender (Drawing #SN520): Dimensions are 8" × 8⅜", with similar construction to the 56' version. Both drawings include two critical notes: (1) UHMW material shall be yellow in color, and (2) length is 10' long. The drawings are marked "NOT TO SCALE" and include instructions that the components are to be "GLUED FOR SHIPPING AND ASSEMBLY". Both drawings are prepared by RJS on 3/18/10 and use the US Army Corps of Engineers Pittsburgh District logo.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Specifications.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
0519 - Fender, Plastic Replacement (56ft Gates) 0520 - Fender, Plastic Replacement (84ft Gates)
File details come from the government source that posted it. Updated .