DRAWING_LCS_LM2500_REMOVAL_RAIL_CONTAINER_A.pdf

PDF 702 KB Posted May 18, 2026

Attached to: LCS LM2500 Removal Rail Container Procurement
Solicitation number: SIMACQ-PD--42-0160
Issued by: Department of the Navy Naval Sea Systems Command

About this file

Written by GovTribe AI · May 18, 2026

This is a technical drawing document for the LCS-LM2500 Removal Rail Container, prepared for the Naval Surface Warfare Center by Windspeed. The drawing contains detailed specifications and assembly instructions for a modular aluminum container system with dimensions of approximately 288 inches in length by 96 inches in width by 48 inches in depth.

The container comprises four primary weldments: a storage box weldment, a lid weldment, and two crossbar weldments. The structure utilizes 6061-T6 aluminum rectangular and square tubing, aluminum sheet stock, and various aluminum angle and plate materials per ASTM B 221, ASTM B 308, and AMS specifications. Key components include 14-gauge and 3/16-inch thick decking, hoist ring pads with specific thread requirements (3/4-10 and 5/16-18), and gasket sealing draw latches. The design incorporates eight vertical support members, multiple risers with corners and end pieces, and structural angles along the perimeter. Assembly requirements specify AWS D1.2 aluminum welding using 4043 filler material, EPDM adhesive bonding for gasket seals, and red Loctite threadlocker for hoist ring installation. The drawing includes detailed weld specifications, dimensional tolerances (fractional ±1/16 inch, decimal .XX ±.03 inch), and flags for orientation marks, lift point identification, and lanyard attachments. The document was initially released on 08/04/2025 with one revision (Rev A) added on 08/20/2025 to clarify hoist ring specifications.

View the file

Other files

File	Type	Posted
N6449826Q51520001.pdf	PDF	May 28, 2026
N6449826Q5152.pdf	PDF	May 18, 2026
CDRL A001 Contract Status Report.pdf	PDF	May 18, 2026
CDRL A002 Developmental Design Drawings.pdf	PDF	May 18, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

8 7 6 5 4 3 2 1

1345678 2

DRAWING # SHT

DATE CUSTOMER:

REV

TITLE:

NTS

UNLESS OTHERWISE SPECIFIED,

ALL DIMENSIONS ARE IN INCHES

AND DEGREES.

DIMENSIONS AND TOLERANCING ARE

APPLICABLE IN THE UNRESTRAINED

CONDITION FOLLOWING WELDING

AND FINAL MACHINING.

APPROVED FOR FABRICATION

BY:______________________ DATE:__________

LCS-LM2500-CONTAINER

NAVAL SURFACE WARFARE CENTER

08/04/25

JP LCS-LM2500-REMOVAL-RAIL-CONTAINER 1

FRACTIONS

±1/16

DECIMALS

.X ±.1

.XX ±.03

.XXX ±.010

ANGLES

± 2

GENERAL NOTES

FLAG NOTES

1 MATCH DRILL & TAP AT ASSEMBLY.

BREAK SHARP EDGES AND CORNERS, EXCEPT AS SHOWN.

SCALE DRAWING AND/OR ANALYZE DATASET FOR NON-

CRITICAL DIMENSIONS NOT SHOWN.

WELD PER AWS D1.2 FOR ALUMINUM WELDMENTS. USE 4043

FILLER MATERIAL FOR ALUMINUM WELDMENTS

ALL SURFACES UNLESS OTHERWISE SPECIFIED250

TOLERANCES:

THIRD ANGLE PROJECTION - USA

DRAWN BYSCALEFINISH:

-9

JOB #

E5-1

E3-1

LANYARD ATTACH WELDMENT -4 TO WELDMENT -2. USE

DET -34 AND #10 SCREWS.

NONE

3 SAND OR ABRADE ALUMINUM SURFACE AND THEN BOND

GASKET USING EPDM ADHESIVE, DET -33.

F5-1

4 PAINT OR STENCIL IN WHITE 2" WIDE

ORIENTATION MARK ON CONTAINER AND LID.

B8-1,C8-1

C7-1

PAINT OR STENCIL IN WHITE "LID ONLY LIFT

POINT". INDICATE LOCATION WITH ARROW.

6 PAINT OR STENCIL IN WHITE "LIFT POINT".

INDICATE LOCATION WITH ARROW.

B7-1

B8-1

INSTALL USING RED LOCTITE THREADLOCKER, DET

-35. ORIENT RING UP ON HOIST RINGS.

B8-1

DET -7 MAY BE FABRICATED FROM A 20' TUBE

AND A 4' TUBE. PLACE WELD ABOVE OR BELOW

DET -8, VERTICAL SUPPORT.

969696

3.0

6.0

2.0

LCS-LM2500-REMOVAL-RAIL-CONTAINER

SCALE: 1:40

2 WELDMENT

C7-4

30 -29

-30-31

LIFT POINTLIFT POINT

-7-7

-8

-20

1B5D6

49.1 2.0

6.0

3 WELDMENT

C6-5

LID ONLY

LIFT POINT

LID ONLY

LIFT POINT

LID ONLY

LIFT POINT

LID ONLY

LIFT POINT

1D7D4

48.0

-31

ISOMETRIC VIEW

SCALE: NONE

1B5

SCALE: 1:4

-3 WELDMENT

-2 WELDMENT

1D7

-3 WELDMENT NOT SHOWN FOR CLARITY

SCALE: 1:20

4 WELDMENT

C6-6

-2 WELDMENT

REVISIONS

ZONE REV DESCRIPTION DATE BY:

- - INITIAL RELEASE 08/04/2025 JP

C2-1, B8-1 A ADDED FLAG NOTE 8 08/20/2025 JP

8 7 6 5 4 3 2 1

1345678 2

SHT

DATE

ANTS

UNLESS OTHERWISE SPECIFIED,

ALL DIMENSIONS ARE IN INCHES

AND DEGREES.

DIMENSIONS AND TOLERANCING ARE

APPLICABLE IN THE UNRESTRAINED

CONDITION FOLLOWING WELDING

AND FINAL MACHINING.

LCS-LM2500-CONTAINER

NAVAL SURFACE WARFARE CENTER

08/04/25

JP LCS-LM2500-REMOVAL-RAIL-CONTAINER 2

FRACTIONS

±1/16

DECIMALS

.X ±.1

.XX ±.03

.XXX ±.010

ANGLES

± 2

TOLERANCES:

DRAWN BYSCALE

-9

REVFINISH:

TITLE:

DRAWING #

CUSTOMER:

JOB #

THIRD ANGLE PROJECTION - USA

SEE SHT 1

8 7 6 5 4 3 2 1

1345678 2

SHT

DATE

ANTS

UNLESS OTHERWISE SPECIFIED,

ALL DIMENSIONS ARE IN INCHES

AND DEGREES.

DIMENSIONS AND TOLERANCING ARE

APPLICABLE IN THE UNRESTRAINED

CONDITION FOLLOWING WELDING

AND FINAL MACHINING.

LCS-LM2500-CONTAINER

NAVAL SURFACE WARFARE CENTER

08/04/25

JP LCS-LM2500-REMOVAL-RAIL-CONTAINER 3

FRACTIONS

±1/16

DECIMALS

.X ±.1

.XX ±.03

.XXX ±.010

ANGLES

± 2

TOLERANCES:

DRAWN BYSCALE

-9

REVFINISH:

TITLE:

DRAWING #

CUSTOMER:

JOB #

THIRD ANGLE PROJECTION - USA

SEE SHT 1

ASSY USED

ITEM TOTAL

QTY

NAME OF DETAIL ZONE MATERIAL DESCRIPTION F/N

- 1 1 LCS-LM2500-REMOVAL-RAIL-CONTAINER A7-1 ---

1 2 1 STORAGE BOX WELDMENT B4-1 ---

1 3 1 LID WELDMENT D5-1 ---

1 4 2 CROSSBAR WELDMENT E3-1 ---

2 5 5 SHORT FRAME MEMBER D3-4 ASTM B 221, 6061-T6, RECT TBG 4.0 X 2.0 X .188 THK X 44.0 LG 2 6 4 SHORT FRAME MEMBER CORNER C1-4 ASTM B 221, 6061-T6, RECT TBG 4.0 X 2.0 X .188 THK X 48.0 LG 2 7 4 LONG FRAME MEMBER C1-4 ASTM B 221, 6061-T6, RECT TBG 4.0 X 2.0 X .188 THK X 288.0 LG 2 8 14 VERTICAL FRAME MEMBER D1-4 ASTM B 221, 6061-T6, SQ TBG 2.0 X 2.0 X .188 THK X 24.4 LG

2 9 4 FRONT SHEET D8-4 AMS4027N, 6061-T6 SHT, 14 GA, .063 THK X 32.4 X 96.0

2 10 2 CENTER SHEET D6-4 AMS4027N, 6061-T6 SHT, 14 GA, .063 THK X 32.4 X 96.0

2 11 2 SIDE SHEET D4-4 AMS4027N, 6061-T6 SHT, 14 GA, .063 THK X 32.4 X 48.0

2 12 2 DECKING E4-4 AMS4027N, 6061-T6 SHT, 3/16 THK X 46.0 X 95.0

2 13 1 DECKING - CENTER E6-4 AMS4027N, 6061-T6 SHT, 3/16 THK X 46.0 X 96.0

2 14 10 RISER C7-4 ASTM B 221, 6061-T6, RECT TBG 3.0 X 2.0 X .25 THK X 8.0 LG

2 15 4 RISER CORNER C8-4 ASTM B 221, 6061-T6, RECT TBG 3.0 X 2.0 X .25 THK X 5.0 LG

2 16 4 HOIST RING PAD F1-4 AMS4027 N 6061-T651 PL 1.0 THK X 2.0 X 2.0

2 17 18 DRAW LATCH PLATE D8-4 AMS4027 N 6061-T651 PL .25 THK X 1.0 X 2.0

2 18 5 RISER CENTER B6-4 ASTM B 221, 6061-T6, RECT TBG 3.0 X 2.0 X .25 THK X 44.0 LG 2 19 2 RISER END B4-4 ASTM B 221, 6061-T6, RECT TBG 3.0 X 2.0 X .25 THK X 48.0 LG

2 20 4 SOCKET E6-4 ASTM B 221, 6061-T6, RECT TBG 3.0 X 2.0 X .25 THK X 6.0 LG

3 21 2 SHORT EDGE ANGLE B4-5 ASTM B 308, 6061-T6 ANG L.25 X 2.0 X 2.0 X 49.2

3 22 2 LONG ANGLE B6-5 ASTM B 308, 6061-T6 ANG L.25 X 2.0 X 2.0 X 289.2

3 23 3 LID SHEET E4-5 AMS4027N, 6061-T6 SHT, 14 GA, .063 THK X 48.0 X 96.0

3 24 4 LID HOIST RING PAD C5-5 AMS-QQ-A-200/8, 6061-T6 RECT .5 X 2.0 X 2.0

3 25 2 LID CROSSBAR B5-5 AMS-QQ-A-200/8, 6061-T6 RECT .25 X 2.0 X 45.2

4 26 2 CROSSBAR D7-6 ASTM B 221, 6061-T6, SQ TBG 2.0 X 2.0 X .188 THK X 42.5 LG

4 27 4 CENTERING BAR D1-6 AMS-QQ-A-200/8, 6061-T6 RECT .25 X 2.0 X 4.0

1 28 1 GASKET SEAL F5-1 WEATHER-RESISTANT RUBBER SEAL, FLANGE MOUNT 5/8 HIGH, MC #1142A82 X 60 FT 1 29 4 SIDE PULL HOIST RING - WLL 4100 LBS B7-1 JERGENS SIDE-PULL HOIST RING #47315-E, ENVIROLOX COATED, WLL 4100 LBS 1 30 4 SIDE PULL HOIST RING - WLL 650 LBS B8-1 JERGENS SIDE-PULL HOIST RING #47311-E, ENVIROLOX COATED, WLL 650 LBS 1 31 18 GASKET SEALING DRAW LATCH E5-1 GASKET SEALING DRAW LATCH, MC #4567A15 OR EQUIV.

1 32 72 SHCS #8-32 X 1/4" E5-1 #8-32 X 1/4" LG SS SOCKET HEAD SCREW, MC #92196A190 OR EQUIV.

1 33 1 EPDM ADHESIVE F/N 3M INDUSTRIAL ADHESIVE 4799 OR EQUIVALENT.

1 34 2 LANYARD F/N LANYARD - SS WITH NYLON COATING 1/16" DIA X 12" LG. MC #30345T145 OR EQUIV.

1 35 1 THREADLOCKER F/N THREADLOCKER - HIGH STRENGTH RED LOCTITE #271 OR EQUIV.

8 7 6 5 4 3 2 1

1345678 2

SHT

DATE

ANTS

UNLESS OTHERWISE SPECIFIED,

ALL DIMENSIONS ARE IN INCHES

AND DEGREES.

DIMENSIONS AND TOLERANCING ARE

APPLICABLE IN THE UNRESTRAINED

CONDITION FOLLOWING WELDING

AND FINAL MACHINING.

LCS-LM2500-CONTAINER

NAVAL SURFACE WARFARE CENTER

08/04/25

JP LCS-LM2500-REMOVAL-RAIL-CONTAINER 4

FRACTIONS

±1/16

DECIMALS

.X ±.1

.XX ±.03

.XXX ±.010

ANGLES

± 2

TOLERANCES:

DRAWN BYSCALE

-9

REVFINISH:

TITLE:

DRAWING #

CUSTOMER:

JOB #

THIRD ANGLE PROJECTION - USA

SEE SHT 1

28.11.5( )

STORAGE BOX WELDMENT

SCALE: 1:40

SEAL

TYP

-9

-15

SYMM

18X

4X 2X

4X 10X

1/8

TYP

3/16

TYP

3/16 3/16

TYP

B3-7 A5-7 B4-1

C7-9 A7-9

A5-9

-12

-8

1D6E2

1C5B12C5C2 1C7B4

47.0 48.0 48.0

3.0

-15 -14 -14 -14 -14 -14 -15

SYMM

-19

3/16

TYP

1/8

TYP

3/16

TYP

1/8

TYP

A4-7

A5-7

-12

-20 -20

-6

-7

SEAL

TYP1/8

3/16

TYP

1/8

TYP

D2-9

A8-8

B2-9

-17

-19

SEAL

TYP

D5-9

1.75 TYP

1D6

SCALE: 1:4

3/16

TYP

WELD DET -16 TO DET -7

-9

-7

-8

SEAL

TYP

DET -9 AND -10 TO DET -16

-10

D8-8

3/16

TYP

DET -20 TO DET -8

1C5

SCALE: 1:10

6 7

-15

-19

-12

-9

14X

SEAL

TYP

1/8 1-12

TYP

3/16

TYP

1/8 1/12

TYP

A7-7

C2-7

A7-7

-6 -7

2C5

SCALE: 1:10

-14

-8

-12 -7

-18

-9

1/8 1-12

TYP

SEAL

TYP

1/8 1/12

TYP

A8-7

3/16

TYP

1C7

DECKING NOT SHOWN FOR CLARITY

SCALE: 1:20

3/16 3/16

TYP

3/16 3/16

TYP

3/16

TYP

3/16

TYP

-8

8 7 6 5 4 3 2 1

1345678 2

DRAWING # SHT

DATE CUSTOMER:

REV

TITLE:

NTS

UNLESS OTHERWISE SPECIFIED,

ALL DIMENSIONS ARE IN INCHES

AND DEGREES.

DIMENSIONS AND TOLERANCING ARE

APPLICABLE IN THE UNRESTRAINED

CONDITION FOLLOWING WELDING

AND FINAL MACHINING.

LCS-LM2500-CONTAINER

NAVAL SURFACE WARFARE CENTER

08/04/25

JP LCS-LM2500-REMOVAL-RAIL-CONTAINER 5

FRACTIONS

±1/16

DECIMALS

.X ±.1

.XX ±.03

.XXX ±.010

ANGLES

± 2

TOLERANCES:

THIRD ANGLE PROJECTION - USA

DRAWN BYSCALEFINISH:

-9

JOB #

NONE

87.6

289.1

87.6 114.0

LID WELDMENT

SCALE: 1:40

24-24 4X

3/16 3/16

TYP

3/16 3/16

TYP

D6-8

D5-1

96.0 96.0 96.0

-23-23 -24-24

-24 -24

SYMM

SEAL

TYP

SEAL

TYP

SEAL

TYP

D7-9

93.6 96.0

289.13

2.0 STK

-25

-22

-21

SYMM

2X 2X

3/16

TYP

3/16 3/16

TYP

3/16 3/16

TYP

3/16

TYP

3/16

TYP

A4-8

B3-8

A6-8

8 7 6 5 4 3 2 1

1345678 2

DRAWING # SHT

DATE CUSTOMER:

REV

TITLE:

NTS

UNLESS OTHERWISE SPECIFIED,

ALL DIMENSIONS ARE IN INCHES

AND DEGREES.

DIMENSIONS AND TOLERANCING ARE

APPLICABLE IN THE UNRESTRAINED

CONDITION FOLLOWING WELDING

AND FINAL MACHINING.

LCS-LM2500-CONTAINER

NAVAL SURFACE WARFARE CENTER

08/04/25

JP LCS-LM2500-REMOVAL-RAIL-CONTAINER 6

FRACTIONS

±1/16

DECIMALS

.X ±.1

.XX ±.03

.XXX ±.010

ANGLES

± 2

TOLERANCES:

THIRD ANGLE PROJECTION - USA

DRAWN BYSCALEFINISH:

-9

JOB #

NONE

43.0

CROSSBAR WELDMENT

SCALE: 1:4

-27-27

SYMM

3/16

TYP

3/16

TYP

3/16

TYP

E3-1

C2-7

4.0

2.0

27 2X B2-8

8 7 6 5 4 3 2 1

1345678 2

DRAWING # SHT

DATE CUSTOMER:

REV

TITLE:

NTS

UNLESS OTHERWISE SPECIFIED,

ALL DIMENSIONS ARE IN INCHES

AND DEGREES.

DIMENSIONS AND TOLERANCING ARE

APPLICABLE IN THE UNRESTRAINED

CONDITION FOLLOWING WELDING

AND FINAL MACHINING.

LCS-LM2500-CONTAINER

NAVAL SURFACE WARFARE CENTER

08/04/25

JP LCS-LM2500-REMOVAL-RAIL-CONTAINER 7

FRACTIONS

±1/16

DECIMALS

.X ±.1

.XX ±.03

.XXX ±.010

ANGLES

± 2

TOLERANCES:

THIRD ANGLE PROJECTION - USA

DRAWN BYSCALEFINISH:

-9

JOB #

NONE

44.0

SHORT FRAME MEMBER

SCALE: 1:10

D3-4

4.0 STK

2.0 STK

.19 STK

SHORT FRAME MEMBER CORNER

LONG FRAME MEMBER

SCALE: 1:10

C1-4

4.0 STK

2.0 STK

.19 STK

RISER

RISER CENTER

SCALE: 1:10

B6-4

C7-4

48.0

RISER END

SCALE: 1:10

B4-4

3.0 STK

2.0 STK

.25 STK

3.0 STK

2.0 STK

.25 STK

5.0

RISER CORNER

SCALE: 1:10

C8-4

3.0 STK

2.0 STK

.25 STK C

VERTICAL FRAME MEMBER

CROSSBAR

SCALE: 1:10

D7-6

D1-4

2.0 STK

.19 STK

3 X 2 X 1/4 TUBE

DETAIL LENGTH (B)

14 8.0 18 44.0

4 X 2 X 3/16 TUBE

DETAIL LENGTH (A)

6 48.0 7 288.0

2 X 2 X 3/16 TUBE

DETAIL LENGTH (C)

8 24.4 26 42.5

8 7 6 5 4 3 2 1

1345678 2

DRAWING # SHT

DATE CUSTOMER:

REV

TITLE:

NTS

UNLESS OTHERWISE SPECIFIED,

ALL DIMENSIONS ARE IN INCHES

AND DEGREES.

DIMENSIONS AND TOLERANCING ARE

APPLICABLE IN THE UNRESTRAINED

CONDITION FOLLOWING WELDING

AND FINAL MACHINING.

LCS-LM2500-CONTAINER

NAVAL SURFACE WARFARE CENTER

08/04/25

JP LCS-LM2500-REMOVAL-RAIL-CONTAINER 8

FRACTIONS

±1/16

DECIMALS

.X ±.1

.XX ±.03

.XXX ±.010

ANGLES

± 2

TOLERANCES:

THIRD ANGLE PROJECTION - USA

DRAWN BYSCALEFINISH:

-9

JOB #

NONE

6.0

2.5

2.0

SOCKET

SCALE: 1:4

E6-4

3.0 STK

2.0 STK

.25 STK

49.1

SHORT EDGE ANGLE

SCALE: 1:20

B4-5

2.0 STK

.25 STK

289.1

LONG ANGLE

SCALE: 1:40

B6-5

2.0 STK

2.0 STK .25 STK

45.1

LID CROSSBAR

SCALE: 1:10

B5-5

2.0 STK

.25 STK

2.0 STK

1.0

HOIST RING PAD

SCALE: 1:2

F1-4

3/4-10 THD THRU

AT ASSEMBLY

1.0 STK

2.0 STK

1.0

LID HOIST RING PAD

SCALE: 1:2

C5-5

5/16-18 THD THRU

AT ASSEMBLY

.5 STK

2.0

4.0

.75

1.0

CENTERING BAR

SCALE: 1:2

D1-6

.25 STK

8 7 6 5 4 3 2 1

1345678 2

DRAWING # SHT

DATE CUSTOMER:

REV

TITLE:

NTS

UNLESS OTHERWISE SPECIFIED,

ALL DIMENSIONS ARE IN INCHES

AND DEGREES.

DIMENSIONS AND TOLERANCING ARE

APPLICABLE IN THE UNRESTRAINED

CONDITION FOLLOWING WELDING

AND FINAL MACHINING.

LCS-LM2500-CONTAINER

NAVAL SURFACE WARFARE CENTER

08/04/25

JP LCS-LM2500-REMOVAL-RAIL-CONTAINER 9

FRACTIONS

±1/16

DECIMALS

.X ±.1

.XX ±.03

.XXX ±.010

ANGLES

± 2

TOLERANCES:

THIRD ANGLE PROJECTION - USA

DRAWN BYSCALEFINISH:

-9

JOB #

NONE

2.25

1.13

28.44 32.3

96.0

FRONT SHEET

14 GA (.063")

SCALE: 1:20

D8-4

28.44

2.25

1.13

96.0

32.3

CENTER SHEET

14 GA (.063")

SCALE: 1:20

D6-4

95.0

46.0

46.88 45.88( )

2.25

1.13

1.12

1.13

DECKING

SCALE: 1:20

SYMM

E4-4

96.0

46.0

2.25

1.13

DECKING - CENTER

SCALE: 1:20

SYMM

E6-4

96.0

48.0

LID SHEET

14 GA (.063")

SCALE: 1:20

E4-5

32.3

48.0

SIDE SHEET

14 GA (.063")

SCALE: 1:20

D4-4

2.0

1.0

DRAW LATCH PLATE

1/4 PLATE

SCALE: 1:4

D8-4

LCS-LM2500-REMOVAL-RAIL-CONTAINER_SHT_001

LCS-LM2500-REMOVAL-RAIL-CONTAINER_SHT_002

LCS-LM2500-REMOVAL-RAIL-CONTAINER_SHT_003

LCS-LM2500-REMOVAL-RAIL-CONTAINER_SHT_004

LCS-LM2500-REMOVAL-RAIL-CONTAINER_SHT_005

LCS-LM2500-REMOVAL-RAIL-CONTAINER_SHT_006

LCS-LM2500-REMOVAL-RAIL-CONTAINER_SHT_007

LCS-LM2500-REMOVAL-RAIL-CONTAINER_SHT_008

LCS-LM2500-REMOVAL-RAIL-CONTAINER_SHT_009

	2025-08-22T09:27:18-0400
HAKUN.KYLE.ERIC.1517605375

File details come from the government source that posted it. Updated May 18, 2026.