Draft Product Specifications for JROTC Drill Rifles.pdf
PDF 715 KB Posted
- Attached to
- HQ JROTC Drill Rifles Federal contract opportunity
- Solicitation number
- PANMCC-25-P-0000-021461
About this file
This document contains draft product specifications for a 1903 Drill Rifle intended for JROTC programs. The specifications detail a black, injection-molded polypropylene rifle with precise measurements, including an overall length of 43.2 in (+/- 0.1 in), a barrel length of 24 7/8 in, and a weight between 8.4-8.6 lbs. The rifle features a heat-treated metal receiver with laser-etched serial number, an articulated bolt action for visual breach inspection, and must visually replicate the original 1903 A3 wooden stock components. Additional required components include a traditional 1 1/4 inch wide double-hook adjustable black sling and a rubber butt plate with a metal core covered by at least 1cm of molded rubber.
The associated Sources Sought Notice indicates the U.S. Government seeks to procure 9,165 drill rifles, 8,998 slings, and 8,983 butt plates on a small business set-aside basis. Interested small businesses (including 8(a), HUBZone, Service-Disabled Veteran-Owned, and Women-Owned Small Business concerns) are invited to respond by 14 July 2024 at 10:00 AM EST. The procurement falls under NAICS code 339930 with a size standard of 700 employees. Respondents are asked to provide company details, interest in competing, previous experience, pricing information, and recommendations for facilitating competition among small businesses.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| IA02 Draft SOW JROTC Drill Rifles.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
JROTC Drill Rifle Product Specifications
1903 Drill Rifle
1. Overall length: 43.2 in +/- 0.1 in
2. Color: Black
3. Barrel length: 24 7/8 in. +/- 0.050 in. (measured from front edge of ejection port opening-based on
1903 A3/MK5 receiver)
4. Weight: 8.4 – 8.6 lbs.
5. Center of gravity: within +/- ½ inch along barrel axis of MK5 MOD1 dummy – use 23 1/16 inches from muzzle as reference (required) location measured with drill rifle resting upright on knife edge jut in front of floorplate.
6. Rifle Stock & Handguard: Injection molded with a no Break rated Polypropylene comparable to the NGA (New Guard America) high impact stock.
7. Metal receiver is heat treated for added strength and laser etched with serial number
8. All exposed stock and hand guard contours shall appear visually to be in the same size and shape as the original 1903 A3 wooden stock components.
9. Minimum level of detail required for metal components includes representations of the following:
Front Sight (no blade insert), Bayonet Stud Band( without bayonet lug), Floor plate/Trigger guard/Trigger (single unit or assembly) Read Sight (proper profile plus windage knob), Magazine Cut-off level (On-flag up position), Safety Lever (off/fire position-flag to left viewed from rear), Cocking Knob (fired position), Bolt handle/knob and cylindrical body (no safety lug or extractor representations required).
10. Articulated bolt action (slide/close) to allow visual inspection of breach to ensure no cartridge can be loaded.
Drill Rifle Sling
• Traditional 1 ¼ inch wide double hook adjustable
• Black cotton or nylon material
• One Nickel sling keeper
DRAFT
Rubber Butt Plate
• Metal plate covered with at least 1cm of molded rubber
DRAFT
File details come from the government source that posted it. Updated .