DRAFT Elevator Inspection Checklist.pdf

CHECKLIST FOR INSPECTION OF ELECTRIC ELEVATORS

GENERAL NOTES:

(a) See ASME A17.2–2004 for detailed inspection information on each item number.

(b) OK p meets requirements; NG p insert number to identify comment on back of this

Checklist; NA p not applicable.

Address:

ID No:

□ Passenger Rated load:

□ Freight class Speed:

□ Routine inspection and test

□ Periodic inspection and test

□ Acceptance inspection and test

Code Edition:

Inspected by:

Print

Signature: Date:

QEI No: Certifying organization:

OK NG NA

1 ELEVATOR — INSIDE OF CAR

1.1 Door reopening device □ □ □

1.2 Stop switches □ □ □

1.3 Operating control devices □ □ □

1.4 Sills and car floor □ □ □

1.5 Car lighting and receptacles □ □ □

1.6 Car emergency signal □ □ □

1.7 Car door or gate □ □ □

1.8 Door closing force □ □ □

1.9 Power closing of doors or gates □ □ □

1.10 Power opening of doors or gates □ □ □

1.11 Car vision panels and glass car doors □ □ □

1.12 Car enclosure □ □ □

1.13 Emergency exit □ □ □

1.14 Ventilation □ □ □

1.15 Signs and operating device symbols □ □ □

1.16 Rated load, platform area, and data plate □ □ □

1.17 Standby power operation □ □ □

1.18 Restricted opening of car or hoistway □ □ □

doors

1.19 Car ride □ □ □

2 ELEVATOR — MACHINE ROOM

2.1 Access to machine space □ □ □

2.2 Headroom □ □ □

2.3 Lighting and receptacles □ □ □

2.4 Machine space □ □ □

2.5 Housekeeping □ □ □

2.6 Ventilation □ □ □

2.7 Fire extinguisher □ □ □

2.8 Pipes, wiring, and ducts □ □ □

2.9 Guarding of exposed auxiliary equipment □ □ □

2.10 Numbering of elevators, machines, and □ □ □

disconnect switches

2.11 Disconnecting means and control □ □ □

2.12 Controller wiring, fuses, grounding, etc. □ □ □

2.13 Governor, overspeed switch, and seal □ □ □

2.14 Code data plate □ □ □

2.15 Static control □ □ □

2.16 Overhead beam and fastenings □ □ □

2.17 Drive machine brake □ □ □

2.18 Traction drive machines □ □ □

2.19 Gears, bearings, and flexible couplings □ □ □

2.20 Winding drum machine and slack cable □ □ □

device

OK NG NA

2.21 Belt- or chain-drive machine □ □ □

2.22 Motor generator □ □ □

2.23 Absorption of regenerated power □ □ □

2.24 AC drives from a DC source □ □ □

2.25 Traction sheaves □ □ □

2.26 Secondary and deflector sheaves □ □ □

2.27 Rope fastenings □ □ □

2.28 Terminal stopping devices □ □ □

2.29 Car and counterweight safeties □ □ □

2.39 Low oil protection □ □ □

2.40 Inspection control □ □ □

2.41 Maintenance records □ □ □

2.42 Static control □ □ □

3 ELEVATOR — TOP OF CAR

3.1 Top-of-car stop switch □ □ □

3.2 Car top light and outlet □ □ □

3.3 Top-of-car operating device □ □ □

3.4 Top-of-car clearance, refuge space, and □ □ □

standard railing

3.5 Normal terminal stopping devices □ □ □

3.6 Final and emergency terminal stopping □ □ □

devices

3.7 Car leveling and anticreep devices □ □ □

3.8 Top emergency exit □ □ □

3.9 Floor and emergency identification □ □ □

numbering

3.10 Hoistway construction □ □ □

3.11 Hoistway smoke control □ □ □

3.12 Pipes, wiring, and ducts □ □ □

3.13 Windows, projections, recesses, and □ □ □

setbacks

3.14 Hoistway clearances □ □ □

3.15 Multiple hoistways □ □ □

3.16 Traveling cables and junction boxes □ □ □

3.17 Door and gate equipment □ □ □

3.18 Car frame and stiles □ □ □

3.19 Guide rails fastening and equipment □ □ □

3.20 Governor rope □ □ □

3.21 Governor releasing carrier □ □ □

3.22 Wire rope fastening and hitch plate □ □ □

3.23 Suspension rope □ □ □

3.24 Top counterweight clearance □ □ □

3.25 Car, overhead, and deflector sheaves □ □ □

CHECKLIST FOR INSPECTION OF ELECTRIC ELEVATORS (Back)

OK NG NA

3.26 Broken rope, chain, or tape switch □ □ □

3.27 Crosshead data plate and rope data tags □ □ □

3.28 Counterweight and counterweight buffer □ □ □

3.29 Counterweight safeties □ □ □

3.33 Compensating ropes and chains □ □ □

4 ELEVATOR — OUTSIDE HOISTWAY

4.1 Car platform guard □ □ □

4.2 Hoistway doors □ □ □

4.3 Vision panels □ □ □

4.4 Hoistway door locking devices □ □ □

4.5 Access to hoistway □ □ □

4.6 Power closing of hoistway doors □ □ □

4.7 Sequence operation □ □ □

4.8 Hoistway enclosure □ □ □

4.9 Elevator Parking devices □ □ □

4.10 Emergency doors in blind hoistways □ □ □

4.11 Separate counterweight hoistway □ □ □

4.12 Standby power selection switch □ □ □

4.13 Inspection control □ □ □

5 ELEVATOR — PIT

5.1 Pit access, lighting, stop switch, and □ □ □

condition

OK NG NA

5.2 Bottom clearance, runby, and minimum □ □ □

refuge space

5.3 Final and emergency terminal stopping □ □ □

devices

5.4 Normal terminal stopping devices □ □ □

5.5 Traveling cables □ □ □

5.6 Governor-rope tension devices □ □ □

5.7 Car Frame and platform □ □ □

5.8 Car safeties and guiding members — □ □ □

including roped-hydraulic elevators installed under A17.1b–1989 and later editions

5.9 Buffers and emergency terminal speed □ □ □

limiting devices

5.10 Compensating chains, ropes, and sheaves □ □ □

6 ELEVATOR — FIREFIGHTERS’ SERVICE

6.1 □ A17.1b–1973 through A17.1b–1980 □ □ □

6.2 □ A17.1–1981 through A17.1b–1983 □ □ □

6.3 □ A17.1–1984 through A17.1a–1988 and □ □ □

A17.3

6.4 □ A17.1b–1989 through A17.1d–2000 □ □ □

Comments:

CHECKLIST FOR INSPECTION OF HYDRAULIC ELEVATORS

(a) See ASME A17.2–2004 for detailed inspection information on each item number.

(b) OK p meets requirements; NG p insert number to identify comment on back of this

Checklist; NA p not applicable.

Address:

ID No:

□ Passenger Rated load:

□ Freight class Speed:

□ Routine inspection and test

□ Periodic inspection and test

□ Acceptance inspection and test

Code Edition:

Inspected by:

Print

Signature: Date:

QEI No: Certifying organization:

OK NG NA

1 ELEVATOR — INSIDE OF CAR

1.1 Door reopening device □ □ □

1.2 Stop switches □ □ □

1.3 Operating control devices □ □ □

1.4 Sills and car floor □ □ □

1.5 Car lighting and receptacles □ □ □

1.6 Car emergency signal □ □ □

1.7 Car door or gate □ □ □

1.8 Door closing force □ □ □

1.9 Power closing of doors or gates □ □ □

1.10 Power opening of doors or gates □ □ □

1.11 Car vision panels and glass car doors □ □ □

1.12 Car enclosure □ □ □

1.13 Emergency exit □ □ □

1.14 Ventilation □ □ □

1.15 Signs and operating device symbols □ □ □

1.16 Rated load, platform area, and data plate □ □ □

1.17 Standby power operation □ □ □

1.18 Restricted opening of car or hoistway □ □ □

doors

1.19 Car ride □ □ □

2 ELEVATOR — MACHINE ROOM

2.1 Access to machine space □ □ □

2.2 Headroom □ □ □

2.3 Lighting and receptacles □ □ □

2.4 Machine space □ □ □

2.5 Housekeeping □ □ □

2.6 Ventilation □ □ □

2.7 Fire extinguisher □ □ □

2.8 Pipes, wiring, and ducts □ □ □

2.9 Guarding of exposed auxiliary equipment □ □ □

2.10 Numbering of elevators, machines, and □ □ □

disconnect switches

2.11 Disconnecting means and control □ □ □

2.12 Controller wiring, fuses, grounding, etc. □ □ □

2.13 Governor, overspeed switch, and seal □ □ □

2.14 Code data plate □ □ □

2.30 Hydraulic power unit □ □ □

2.31 Relief valves □ □ □

2.32 Control valve □ □ □

2.33 Tanks □ □ □

2.34 Flexible hydraulic hose and fitting □ □ □

assemblies

2.35 Supply line and shutoff valve □ □ □

OK NG NA

2.36 Hydraulic cylinders □ □ □

2.37 Pressure switch □ □ □

2.38 Roped water hydraulic elevators □ □ □

2.39 Low oil protection □ □ □

2.40 Inspection control □ □ □

2.41 Maintenance records □ □ □

2.42 Static control □ □ □

3 ELEVATOR — TOP OF CAR

3.1 Top-of-car stop switch □ □ □

3.2 Car top light and outlet □ □ □

3.3 Top-of-car operating device □ □ □

3.4 Top-of-car clearance, refuge space, and □ □ □

standard railing

3.5 Normal terminal stopping devices □ □ □

3.6 Final and emergency terminal stopping □ □ □

devices

3.7 Car leveling and anticreep devices □ □ □

3.8 Top emergency exit □ □ □

3.9 Floor and emergency identification □ □ □

numbering

3.10 Hoistway construction □ □ □

3.11 Hoistway smoke control □ □ □

3.12 Pipes, wiring, and ducts □ □ □

3.13 Windows, projections, recesses, and □ □ □

setbacks

3.14 Hoistway clearances □ □ □

3.15 Multiple hoistways □ □ □

3.16 Traveling cables and junction boxes □ □ □

3.17 Door and gate equipment □ □ □

3.18 Car frame and stiles □ □ □

3.19 Guide rails fastenings and equipment □ □ □

3.20 Governor rope □ □ □

3.21 Governor releasing carrier □ □ □

3.22 Wire rope fastening and hitch plate □ □ □

3.23 Suspension rope □ □ □

3.27 Crosshead data plate and rope data tags □ □ □

3.28 Counterweight and counterweight buffer □ □ □

3.29 Counterweight safeties □ □ □

3.30 Speed test □ □ □

3.31 Slack rope device — roped-hydraulic □ □ □

elevators installed under A17.1b–1989 and later editions

3.32 Traveling sheave — roped-hydraulic □ □ □

elevators installed under A17.1b–1989 and later editions

CHECKLIST FOR INSPECTION OF HYDRAULIC ELEVATORS (Back)

OK NG NA

4 ELEVATOR — OUTSIDE HOISTWAY

4.1 Car platform guard □ □ □

4.2 Hoistway doors □ □ □

4.3 Vision panels □ □ □

4.4 Hoistway door locking devices □ □ □

4.5 Access to hoistway □ □ □

4.6 Power closing of hoistway doors □ □ □

4.7 Sequence operation □ □ □

4.8 Hoistway enclosure □ □ □

4.9 Elevator parking device □ □ □

4.10 Emergency doors in blind hoistways □ □ □

4.12 Standby power selection switch □ □ □

4.13 Inspection control □ □ □

5 ELEVATOR — PIT

5.1 Pit access, lighting, stop switch, and □ □ □

condition

5.2 Bottom clearance, runby, and minimum □ □ □

refuge space

5.4 Normal terminal stopping devices □ □ □

OK NG NA

5.5 Traveling cables □ □ □

5.6 Governor-rope tension device □ □ □

5.7 Car frame and platform □ □ □

5.8 Car safeties and guiding members — □ □ □

including roped-hydraulic elevators installed under A17.1b–1989 and later editions

5.11 Plunger and cylinder □ □ □

5.12 Car buffer □ □ □

5.13 Guiding members □ □ □

5.14 Supply piping □ □ □

6 ELEVATOR — FIREFIGHTERS’ SERVICE

6.1 □ A17.1b–1973 through A17.1b–1980 □ □ □

6.2 □ A17.1–1981 through A17.1b–1983 □ □ □

6.3 □ A17.1–1984 through A17.1a–1988 and □ □ □

A17.3

6.4 □ A17.1b–1989 through A17.1d–2000 □ □ □

CHECKLIST FOR INSPECTION OF ESCALATORS

(a) See ASME A17.2–2004 for detailed inspection information on each item number.

(b) OK p meets requirements; NG p insert number to identify comment on back of this

Checklist; NA p not applicable.

Address:

ID No:

□ Passenger Rated load:

□ Freight class Speed:

□ Routine inspection and test

□ Periodic inspection and test

□ Acceptance inspection and test

Code Edition:

Inspected by:

Print

Signature: Date:

QEI No: Certifying organization:

OK NG NA

7 ESCALATOR — EXTERNAL

7.1 General fire protection □ □ □

7.2 Geometry □ □ □

7.3 Handrails □ □ □

7.4 Entrance and egress ends □ □ □

7.5 Lighting □ □ □

7.6 Caution signs □ □ □

7.7 Combplate and comb step impact device □ □ □

7.8 Deck barricades and antislide devices □ □ □

7.9 Steps and upthrust device □ □ □

7.10 Operating and safety devices □ □ □

7.11 Skirt obstruction device □ □ □

7.13 Egress restriction (rolling shutter) device □ □ □

7.14 Speed □ □ □

7.15 Balustrades □ □ □

7.16 Ceiling intersection guards □ □ □

7.17 Step/skirt clearances, panels, and □ □ □

performance index

7.18 Outdoor protection □ □ □

OK NG NA

8 ESCALATOR — INTERNAL

8.1 Machinery space access, lighting, □ □ □

receptacle, and condition

8.2 Stop switch □ □ □

8.3 Controller and wiring □ □ □

8.4 Drive machine and brake □ □ □

8.5 Speed governor □ □ □

8.6 Broken drive chain and disconnected □ □ □

motor safety device

8.7 Reversal stop switch □ □ □

8.8 Broken step chain device □ □ □

8.9 Step upthrust device □ □ □

8.10 Missing step device □ □ □

8.11 Step level device □ □ □

8.12 Steps, step chains, and trusses □ □ □

8.13 Handrail systems and safety devices □ □ □

8.14 Code data plate □ □ □

8.15 Response to smoke detectors □ □ □

8.16 Step lateral displacement device □ □ □

CHECKLIST FOR INSPECTION OF MOVING WALKS

(a) See ASME A17.2–2004 for detailed inspection information on each item number.

(b) OK p meets requirements; NG p insert number to identify comment on back of this

Checklist; NA p not applicable.

Address:

ID No:

□ Passenger Rated load:

□ Freight class Speed:

□ Routine inspection and test

□ Periodic inspection and test

□ Acceptance inspection and test

Code Edition:

Inspected by:

Print

Signature: Date:

QEI No: Certifying organization:

OK NG NA

9 MOVING WALK — EXTERNAL

9.1 General fire protection □ □ □

9.2 Geometry □ □ □

9.3 Handrails □ □ □

9.4 Entrance and egress ends □ □ □

9.5 Lighting □ □ □

9.6 Caution signs □ □ □

9.7 Combplate and comb step impact device □ □ □

9.8 Deck barricades □ □ □

9.9 Treadways □ □ □

9.10 Operating and safety devices □ □ □

9.13 Egress restriction (rolling shutter) device □ □ □

9.14 Speed □ □ □

9.15 Balustrades □ □ □

9.16 Ceiling intersection guards □ □ □

9.17 Skirt panels □ □ □

9.18 Outdoor protection □ □ □

9.19 Maintenance records □ □ □

OK NG NA

10 MOVING WALK — INTERNAL

10.1 Machinery space access, lighting, □ □ □

receptacle, and condition

10.2 Stop switch □ □ □

10.3 Controller and wiring □ □ □

10.4 Drive machine and brake □ □ □

10.5 Speed governor □ □ □

10.6 Broken drive chain and disconnected □ □ □

motor safety device

10.7 Reversal stop switch □ □ □

10.8 Broken treadway device □ □ □

10.9 (Reserved) □ □ □

10.10 Missing pallet device □ □ □

10.11 Pallet level device □ □ □

10.12 Pallets, pallet chains, and trusses □ □ □

10.13 Handrail systems and safety devices □ □ □

10.14 Code data plate □ □ □

10.15 Response to smoke detectors □ □ □

Menu: