DQ1 804 Bid Solicitation Document Utility Vehicle -.docx

DOCX document 186 KB Posted

Attached to
PMAA, 4215 Utility Vehicle for Work Unit
Solicitation number
DQ1 PMAA 2015000804 1
Issued by
Colorado

About this file

This is a Documented Quote (DQ) solicitation issued by the State of Colorado, Department of Natural Resources, on behalf of the Colorado Division of Parks and Wildlife, for the procurement of one John Deere Gator XUV 825i utility vehicle. The vehicle specifications include a 4-cycle gas engine with electronic fuel injection rated at 50 horsepower, continuously variable transmission with four-wheel drive capability, hydraulic dump bed with power lift, heavy-duty front brush guard and fender guard, 72-inch snow removal blade, cab with doors and windshield wipers, and heater. Additional requirements include an onboard power front protection package and a service center located within 100 miles of Alamosa, Colorado. The bid submission deadline is January 29, 2015, at 11:00 AM MST, with delivery required by February 27, 2015, to the Colorado Parks and Wildlife Native Aquatic Species Restoration Facility in Alamosa, Colorado. Prospective bidders may submit written inquiries until January 26, 2015, at 12:00 PM, and all bids must be submitted via email, mail, or hand delivery to the Colorado Parks and Wildlife Purchasing Office in Denver.

Pricing must include all freight and shipping costs, which will not be reimbursed separately by the State of Colorado. Payment will be made on a reimbursement basis following delivery and acceptance of the vehicle by the Colorado Parks and Wildlife project manager. Vendors must be registered on the Vendor Self-Service (VSS) system by the bid closing date to be considered responsive. Bidders are required to submit vendor information, warranty details, and pricing on the designated bid pricing sheet and must accept Colorado Purchase Order Terms and Conditions. This solicitation is for new equipment only, and a Purchase Order Contract will be issued to the awarded bidder, incorporating all associated bid documents and standard state terms and conditions.

View the file

Other files

File Type Posted
POTerms&Conditions1-1-09.docx DOCX document
W-9.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

State of Colorado Documented Quote

State of ColoradoDQ1 2015*804
Documented Quote

DQ1 2015*804

BIDS DUE: 1/29/2015@ 11:00 AM(MST)

All Bids shall be submitted F.O.B. Destination unless Otherwise Specified Per the attached specifications, terms, and conditions

Issuing Office This Request for Documented Quotations (DQ) is issued by the State of Colorado, Department of Natural Resources, on behalf of the Colorado Division of Parks and Wildlife. All contact regarding this solicitation is to be directed to:

Department of Parks and Wildlife Lisa Hollerbach, CPW Purchasing Office 1313 Sherman St., Room 618, Denver, Co 80203 P-303-866-3203 X 4695 or emailed to:

Email: dnr_cpw_bids@state.co.us

Purpose:

The purpose of this Request for Documented Quotations is to obtain competitive quotations from qualified individuals and firms for a John Deere 825i Utility Vehicle

Bidders are urged to read the bid thoroughly before submitting the bid.

Specifications:

Manufacturer
John Deere
Model
Gator XUV 825i
Quantity
1

Engine

Type
4-cycle gas, Electronic Fuel Injection (EFI) , for superb performance, altitude adjustment and cold-weather starting (tested to -20®C)
Displacement
812 cc
Power
50 (37 kw)* @ 6000 rpm
Cooling system
Liquid

Drivetrain

Transmission
Continuously Variable Transmission (CVT) with clutch enclosure
Final drive
Two speed, oil bath
Four wheel drive
On-demand true four-wheel drive system
Traction assist
Positive locking, mechanically actuated (hand-operated)
Descent control
Yes
Maximum traveling speed
0-44 hi forward, 0-17 lo forward, 0-20 reverse mph

0-71 hi forward, 0-27 lo forward, 0-32 reverse km/h

Suspension

Front
Fully independent dual A-Arm with adjustable coils
Rear
Fully independent dual A-Arm with adjustable coils and sway bar

Brakes

Type
Front/rear hydraulic disc with twin piston front calipers
Park brake
Driveline, internal wet multi-disc, hand operated

Tires / Wheels

Front
26x9-12 Ancla M-T (Aggressive Terrain))
Rear
26x11-12 Ancla M-T (aggressive terrain)

Dimensions / Capacities

Wheelbase
79 in. / 2007mm
Dry weight
1649 lb / 747.9kg
Length
116 in. / 2946mm
Width
62 in. / 1571mm
Height
75 in. / 1903mm
Tread centers
51.2 in. / 1300mm
Ground clearance
11.0 in. / 280mm
Fuel capacity
7.3 U.S. gal. / 27.6L
Cargo box dimensions
45 x 12 x 52 in / 1143 x 304.8 x 1320 mm
Cargo box capacity (weight)
1000lb / 454kg
Payload capacity
1400 lb / 635kg
Towing capacity
1500 lb / 680kg
Hitch
Standard 2-in. receiver

Features

Color
Green/Yellow
Power steering
No
Battery / Alternator / Power port
340 CCA

75 amp @ 6000 rpm, regulated, 900 watts

Instrumentation
Digital Display (system diagnostic light, speed, rpm, 4WD indicator, fuel level, coolant temperature, hour meter, miles, park brake light)
Storage
2 Cup Holders, Under Hood, Glovebox
Seating
Bench (Available Bucket Seats)
Cargo Box Requirements
Hydraulic Dump Bed
Power Front Protection Package
Power Lift (Hydraulic)

Heavy Duty Front Brush Guard

Heavy Duty Fender Guard

Heavy Duty 72” blade for snow and dirt removal

Cab w/doors, glass or no scratch windshield with windshield wipers

Heater

WARRANTY/SERVICE:

Service Center must be within 100 Miles of Alamosa, CO.

DELIVERY

John Deere 825i must be delivered to the address below:

Colorado Parks and Wildlife Native Acquatic Species Restoration Facility 6655 County Road 106 South Alamosa, CO 81101

Delivery must be made by February 27, 2015.

Inquiries:

Prospective proposers may make written inquiries concerning the solicitation. No inquiries will be accepted after the date and time specified in the Schedule of Activities, Inquiry Deadline. Questions must be submitted in writing on the proposer’s letterhead to:

Lisa Hollerbach
Department of Natural Resources
Division of Parks and Wildlife
(See above for contact information)

Inquiries sent by fax will not be accepted. The preferred method for submitting inquiries is via email as an attachment that can be opened by Microsoft Word 2003 or 2007. An amendment will be posted on the ColoradoVSS that lists all questions asked and the response from CPW in regards to answering these questions.

The deadline for inquiries and questions will be January 26, 2015 at 12 Noon.

Amendments to Request for Documented Quotation In the event it should be necessary to revise any portion of this Request for Documented Quotation addenda will be posted on the ColoradoVSS; website (see below).

Bid Submittal The bid due date for this submittal of documented quotations is January 29, 2015 at 11:00AM. Bids will be accepted by mail, hand-carried or via email as a Word or .pdf file attachment, and must be sent to the Colorado Parks and Wildlife Purchasing Agent:

Lisa Hollerbach, Purchasing Agent
Department of Natural Resources Purchasing Office
1313 Sherman Street #618
Denver, CO. 80203

Phone: (303) 866-3203 X4695 Email: dnr_cpw_bids@state.co.us

A responsive bid must include the submittal items outlined below under SUBMITTAL, below.

ColoradoVSS Website:

This solicitation is published using the ColoradoVSS.; www.colorado.gov/vss. Solicitation documents and information (including any amendments or modifications) will be updated with revisions on this site.

Vendor Requirements:

Vendors must be registered on Vendor Self-Service (VSS) by the time the bid closes in order to be considered responsive.

VSS and its registration information can be found at:

https://codpa-vss.hostams.com/webapp/PRDVSS1X1/AltSelfService

Colorado Contract or Purchase Order:

A Purchase Order Contract will be issued to the awarded bidder. The Purchase Order Contract will include all documents associated with the bid including this Request for Documented Quotation, the bidder’s response and the Colorado Purchase Oder Terms and Conditions, which are attached to this solicitation.

How to Submit a Bid Response:

All vendors wishing to submit a bid response for this DQ must submit their proposal, including the Vendor Information sheet and Bid Pricing Sheet by one of the following methods:

· Via email to DNR_CPW_Bids@state.co.us;

· Delivery via USPS or other courier services

· Personal delivery (hand delivered) to Colorado Parks and Wildlife, Procurement Office Attn: DQ1 2015*804, 1313 Sherman Street, Denver, CO 80203.

PLEASE NOTE: ALL bids must be received in the Procurement Unit at 1313 Sherman, Denver, CO 80203 by the bid closing time or the bid will not be accepted. – NO EXCEPTIONS

Attachments:

· Colorado Purchase Order Terms and Conditions

· W-9 Form

Questions about the Documented Quote All questions about the specific item being solicited for must be emailed to the CPW Purchasing Agent in charge of the Documented Quote at dnr_cpw_bids@state.co.us

· If you have questions about the process to submit a bid response, please call the CPW Purchasing Agent in charge of the solicitation, identified in the head of Page 1.

Measurement and Payment Payment for the commodity being solicited will occur on a reimbursement basis, following the delivery and acceptance of the product(s) by the Colorado Parks and Wildlife project manager.

SUBMITTAL

PRICING

Item
Price (Per Item)
John Deere 825i Utility Vehicle (per above specifications)
$

Warranty time period

What does the warranty cover?

***This solicitation is for new equipment only **

Vendor Information

Delivery Date

F.E.I.N.

Company Name

Address

City/State/Zip

Phone/Fax

Email Address

Signature

Typed/Printed Name

Title

Date

Have all requirements for this solicitation, as stated above, been met? Yes |_| No |_|

Do you accept Colorado PO Terms and conditions? Yes |_| NO |_|

Pricing must include freight and shipping costs. State of Colorado will NOT pay for shipping and/or freight Page 3 of 7 DQ1 2015*804 image1.jpeg

File details come from the government source that posted it. Updated .