DOR.pdf

DESCRIPTION OF REQUIREMENTS

1.0 REQUIREMENTS

The Contractor shall provide the following:

1. Markforge FX20 3D Printer – Qty:1

Specifications for FX20 Production Grade 3d Printer

Printer Properties Process Fused Filament Fabrication, Continuous Fiber Reinforcement

Build Volume Single-nozzle builds: 525 x 400 x 400 mm (20.6 x 15.7 x 15.7 in)

Multi-nozzle builds: 500 x 400 x 400 mm (19.7 x 15.7 x 15.7 in)

Weight 530 kg (1170 lbs)

Machine Footprint 1325 x 900 x 1925 mm (52.2 x 35.5 x 75.75 in)

Temperature Control Up to 200°C steady-state

Print System Direct-drive print head with three nozzles (two plastic, one fiber)

Power 200-240 VAC 2W+PE 40A // 200-240 VAC 3Ø+PE 24A //

347-415 VAC 3Ø+N+PE 14A; 50-60 Hz

Safety IEC/UL/CSA 62368-1 certified, CE Marked, EU Machinery Directive compliant

Materials Plastics Vega™*, ULTEMTM 9085 filament, Onyx®, Onyx FR

Continuous Fibers Carbon Fiber, Fiberglass*, Aramid Fiber

(Kevlar®)*, High Temperature Carbon

Fiber, Carbon Fiber FR

Part Properties Layer Height 50 μm minimum, 250 µm maximum

Accuracy +/- 125 µm or +/- 0.0015 mm per mm (whichever is greater)

Software Eiger Secure digital library, powerful slicer, and printer management (premium options available at cost)

Security Two-factor authentication, org admin access, single sign-on, MFP print files encrypted by default and tamper resistant

Connectivity Eiger connection and over-the-air updates via Ethernet

2. Digital Forge – Essential Digital Forge Subscription – 3 Years – Qty:1

This subscription includes:

• Custom Analytics

• Part Approval Workflows

• Custom TLS Certificates

• On-Site Support

• Wear & Tear Replacement PartsPartner Access to Markforged Technical Services

• Day-90 Consultation with Partner & Markforged Specialist (FX-20)

• Annual Machine Calibration & Check-in (Industrial and FX20)

• Preventative Maintenance

• Productivity Boost Consultation

• Uptime Insurance

3. FX20 – Digital Forge Essential – 1 Year – Qty:1

This provides hardware support and spare parts replacement as detailed in Line 2 for 1

Year.

4. Digital Forge – On Prem – 1 Year – Qty:1

This subscription includes:

• Provides Offline software capability without the need to connect to internet. This is the preferred solution for DOD, Military and ITAR restricted organizations.

• Data Encryption (LTS and FIPS)

• Print File Locking

• Support Overrides

• Fiber Overrides

• Job History Tracking

• Markforged University

5. Contractor shall provide Installation & Operator Training for Markforge FX20 3D Printer.

Installation & Operator Training Includes:

• Installing printer, printer head and components

• Demonstration of maintenance requirements

• Software for FX20 operation and usage training

2.0 DELIVERY LOCATION

Naval Station Mayport

Southeast Regional Maintenance Center (SERMC)

Bldg. 1488 Massey Avenue

Mayport, FL 32228

Note: Offload at North West corner of compound.

2.1 SPECIAL DELIVERY INSTRUCTIONS

Delivery must take place between the core business hours of 0800AM – 1530PM EDT, Monday through Friday and shall not include after-hours, weekends, and holidays. Contractor personnel, whose tasks involve operation of any vehicles, shall possess a valid U.S. state driver’s license, certificates and permits, applicable for the type and class of vehicle being operated. Required delivery date 30 days after Contract is awarded.

2.2 POINTS OF CONTACT

Tone D’Addario, (904) 270-5127 x 3421, tone.daddario.civ@us.navy.mil

3.0 Defense Biometric Identification Systems (DBIDS)

Defense Biometric Identification System (DBIDS) increases installation security and communications by receiving frequent database updates on changes to personnel/credential status, law enforcement warrants, lost/stolen cards, and force protection conditions. The system provides a continuous vetting anytime the DBIDS card is scanned at an installation entry point. If you currently have a Navy Commercial Access Control System (NCACS) card, the following is required to get a DBIDS credential:

• Present your NCACS Card and a completed copy of the SECNAV FORM 5512/1 to the base Visitor Control Center representative.

• The VCC will pull up your information in the computer, ensuring all information is current and correct.

• Once your information is validated, a temporary DBIDS credential is provided.

• Your temporary credential will have an expiration date, prior to which you will need to obtain your permanent DBIDS credential (~ 180 days).

• For each additional U.S. Navy installation to which you need access, the first time you visit you only need to bring your DBIDS credential and statement of purpose for base access when arriving at the Visitor Control Center.

• The representative will enter base access authorization and then you may proceed to work.

If you do NOT have an NCACS Card, the following is required to obtain a DBIDS credential:

• Present a letter or official document from my government sponsoring organization that provides the purpose for your access.

• Present valid identification, such as a passport or Real ID Act-compliant state driver's license.

• Present a completed copy of the SECNAV 5512/1 form to obtain your background check.

• Upon completion of the background check, the Visitor Control Center representative will complete the DBIDS enrollment process, which includes your photo, fingerprints, base restrictions, and several other assessments; after all this is done, you will be provided with your new DBIDS credential.

• You may now proceed to work.

mailto:tone.daddario.civ@us.navy.mil

For additional questions about obtaining a DBIDS card, contact your local base visitor control center. Additional information is available at https://www.cnic.navy.mil/Operations-and-

Management/Base-Support/DBIDS/.

https://www.cnic.navy.mil/Operations-and-Management/Base-Support/DBIDS/ https://www.cnic.navy.mil/Operations-and-Management/Base-Support/DBIDS/