dj051 overhaul descripton 3010-01-530-1103.pdf

OVERHAUL DESCRIPTION

FOR OFFICIAL USE ONLY

ITEM NAME DRIVE UNIT,ANGLE

STOCK NUMBER 3010-01-530-1103

PART NUMBER RSB096-079A

USED ON VARIOUS VESSELS

Items as received by the contractor must be complete and of the proper cited part number. Discrepancies shall be reported to the Coast Guard Contracting Officer.

OVERHAUL REQUIREMENTS:

Refer to SFLC SPECIFICATION R-400-299-M

1.) Hourly Labor Rate: __________ 2.) Hours needed for each piece of equipment being repaired: __________ 3.) A list of parts that are being replaced for each piece of equipment being repaired: __________ 4.) The cost of each part that is being replaced for each piece of equipment being repaired: __________ 5.) If any other costs are being implemented such as Packaging, Marking, Freight and or Delivering etc. these charges shall be individually identified on the inspection/repair report.

Failure in following these instructions will result in the termination of the contract.

EACH UNIT TO HAVE ELECTROSTATIC PROTECTION IAW TYPE III, CLASS I OF MIL-PRF-

81705E_AMENDMENT-1 BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC DISCHARGE

PROTECTIVE, HEAT-SEALABLE; IF REQUIRED.

EACH ITEM TO BE INDIVIDUALLY PACKAGED IAW THE FOLLOWING: MIL-STD-2073-1E

W/CHANGE 1 7 JANUARY 2011, METHOD 10 ASTM-D-3951-10 PACKING, COMMERCIAL (IF

SPECIFICALLY AUTHORIZED BY THE GOVERNMENT)

EACH ITEM TO BE INDIVIDUALLY MARKED IAW THE FOLLOWING: MIL-STD-129R 14 FEB

2014 MARKING FOR SHIPMENT AND STORAGE.

BAR CODING REQUIRED, IF CAPABLE, TO COMPLY WITH THE FOLLOWING: MIL-STD-129R

14 FEB 2014 MILITARY MARKING FOR SHIPMENT AND STORAGE. SEE SECTION 5, PAGE 22

OF THIS SPECIFICATION FOR IDENTIFICATION LINEAR (CODE 39) AND 2D (PDF417) BAR

CODE MARKINGS AND LOCATIONS.

WARRANTY:

X A. Standard Manufacturer's Warranty

B. Item being repaired as an "onboard repair" or a "system stock" item and will be put into inventory. NOT FOR IMMEDIATE INSTALLATION.

Contractor must guarantee item against defects that lead to failure for days after installation for a period of up to two (2) years after delivery to Coast Guard.

GOVERNMENT ACCEPTANCE:

SHELF LIFE CD 0

GOVERNMENT ACCEPTANCE:

Acceptance will be made at destination by a Government representative.

Acceptance will be contingent upon the representative's verification of no damage in transit, correctness and completeness of order and contractor's conformance to preservation/packaging, packing and marking requirements.

OVERHAUL DESCRIPTION

PACKAGING AND MARKING FOR SHIPMENT:

X

A. Each unit shall be packed individually in it's own wooden box which shall be capable of providing adequate protection to the item during multiple shipments. Mark each box in legible black print lettering with the following information:

NATIONAL STOCK NUMBER

ITEM NAME

PART NUMBER

GOVERNMENT ORDER NUMBER

3010-01-530-1103

DRIVE UNIT,ANGLE

RSB096-079A

PRESERVATION / PACKAGING:

X A. Each unit shall be individually preserved and wrapped for protection against deterioration for a period of two (2) years minimum.

B. See Attachments

B. See Attachments

And the words: "Coast Guard SFLC Material, Condition "A"

RECOMMENDED SOURCES:

FURUNO USA INC

4400 NW PACIFIC RIM BLVD.

CAMAS, WA. 98607

360-834-9300 / HTTP://WWW.FURUNOUSA.COM

EMAIL: JTREECE@FURUNO.COM

GEODESICX, INC.

616 INNOVATION DRIVE

CHESAPEAKE VA 23320-3826

SALES@GEODESICX.COM

757-312-0790 EXT 232

WRITTEN BY:

DATE :

KEVIN CANTRELL

26 MAY 21

Cost Estimate for Overhaul NOT TO EXCEED: $3,000