DI-TMSS-81723.pdf
PDF 28 KB Posted
- Attached to
- Mission Clean Power System Federal contract opportunity
- Solicitation number
- N6426722Q5048
About this file
This document contains a Data Item Description and a related federal contract opportunity for a Mission Clean Power System. The Data Item Description provides guidance for preparing an Engineering Manual and outlines required sections including a title page, introduction, operation description, theory of operation, maintenance diagrams and procedures, installation information, and a parts list.
The federal contract opportunity is a combined synopsis/solicitation seeking quotes for a Mission Clean Power System to support the Department of the Navy Naval Sea Systems Command. Quotes are due by the date specified and must be submitted electronically in PDF or MS Word format to the email address provided. The award will be made on a single purchase order to the responsible offeror whose proposal conforms to the requirements and represents the best value based on the criteria in sections L and M of the solicitation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| N6426722Q5048_RFQ_Redacted.pdf | ||
| CDRL A001.pdf | ||
| CDRL A002.pdf | ||
| CDRL A003.pdf | ||
| DI-NDTI-80566.pdf | ||
| DI-MISC-80711A.pdf | ||
| CDRL A005.pdf | ||
| DI-MICS-1018.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
TITLE: Engineering Manual
NUMBER: DI-TMSS-81723 Approval Date: 29 NOV 2006 AMSC Number: 7677 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/I5222 APPLICABLE Forms: N/A
Use/Relationship:
The Engineering Manual is use by engineering personnel familiar with the technical requirements of the equipment and system to be delivered.
This Data Item Description (DID) contains the format and content preparation instructions for preparing an Engineering Manual. The technical manual shall be prepared for use by engineering personnel familiar with the technical requirements of the equipment and system to be delivered.
Requirements:
1. Reference Document: None.
2. Format: Commercial practices shall be used in the preparation of the manual. The manual shall be fastened between durable covers. The cover shall be marked with the publication numbers, equipment, and date.
3. Content: The manual content shall include at least the following (with appropriate illustrations):
a. A Title Page that shall contain the publication numbers, equipment nomenclature, purchases description numbers, contract number and manual date.
b. An Introduction Section that shall include a general physical description of all equipment, explain briefly what it is, and what it will do, and present all information of a general nature applicable to complete equipments. When the text contains terms not commonly used, definitions shall be included.
c. An Operation section that shall explain in detail how the equipment operates and describes all modes of operation, adjustment of controls indicator readings for normal operation and adjustment necessary to maintain normal operation.
d. A Theory of Operation Section that shall contain a technical explanation of all units and special circuitry used in the equipment. A Maintenance Section containing the necessary schematic drawings, wiring diagrams, and logic
Source: http://assist.dla.mil -- Downloaded: 2021-11-22T15:17Z
Check the source to verify that this is the current version before use.
DI-TMSS-81723
diagrams for complete maintenance of the equipment. This section shall specifically include an overall block diagram. An Installation and Interface Section which shall contain sufficient information to install and provided mechanical and electrical information such as inputs, outputs, weight, size, connectors, power, etc.
e. A Parts List Section which shall contain a tabulation of data on all electrical, mechanical, and operational components in the equipment and system. For each part that is listed, provided the following:
1. Reference Designation
2. Name and Description
3. True Manufacturers Part Number
4. Manufacturers name, address and cage code
5. Part Number
6. Total number of parts per item
4. END OF DI-TMSS-81723
Source: http://assist.dla.mil -- Downloaded: 2021-11-22T15:17Z
Check the source to verify that this is the current version before use.
File details come from the government source that posted it. Updated .