DEPServicebody184164(1).xls
XLS spreadsheet 26 KB Posted
- Solicitation number
- RFQ - 18P - 10071400000000000042
- Issued by
- Kennebec County, Maine
About this file
Summary
This is a specifications and pricing document for the State of Maine related to the procurement of an aluminum or fiberglass composite body for vehicle 184-164. The document outlines detailed specifications for the vehicle body component, including dimensional requirements, material standards, and manufacturing tolerances. The procurement seeks a single replacement body unit that must meet state and federal transportation standards. No specific response deadline, bid opening date, or contract award date is explicitly stated in the available documentation. The contract term and any renewal options are not detailed in the file provided.
Pricing information and cost estimates are not fully disclosed in the summary documentation. The file does not identify an incumbent vendor, specific set-asides, or funding sources and amounts. The document appears to be a technical specification sheet designed to guide bidders in understanding the exact requirements for the composite body component, with emphasis on material quality, construction standards, and dimensional accuracy to ensure compatibility with the existing vehicle platform.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 184164 Truck body letter for specification.doc | DOC document | |
| Solicitation_terms.doc | DOC document | |
| 184164 truck body spec drawings[1].pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| Spec# 184-164 | Aluminum or Composite Fiberglass Service Body | |||||
| General Description | Heavy duty fiberglass composite or aluminum service body with canopy for dual rear wheel. All stainless steel latches, hinges, and hardware. | |||||
| Minimum Specifications | ||||||
| Application | 2011 Ford F350 Super duty cab and chassis, DRW, regular cab, 4x4, 6.7 litre diesel, 13000GVW, cab to axle: 84", 162 WB | |||||
| Body Size | Length: 132" Width: 94" Height: 60" or 72" inside head room (please quote both heights) | |||||
| Body Shell & Floor | Aluminum or fiberglass composite construction throughout, steel understructure, 1/8"steel threadplate floor, 3/16" smooth aluminum header panel, 3/16" aluminum tail skirt, fully undercoated, undercoated steel wheel well liners, aluminum rock guards at front of body. | |||||
| Weather Stripping | Heavy duty, closed cell automotive type. | |||||
| Canopy | Aluminum or Fiberglass composite canopy roof, full width, with double rear doors and aluminum bulkhead (if available). 2" retainer on top of compartment both street and curb sides. Single door for front compartment on curb side. Door can be either swing or roll-up. | |||||
| Exterior Compartments Construction | Vinyl covered stainless steel cables on all doors. 4 over center door checks. One-piece molded or aluminum fabricated doors with automotive finish both sides. Recessed door jambs. Shelves to be 18 gauge galvanized, hemmed, rated for 250 lb. capacity, with twenty shelf dividers. Master rod lock system. Flow thru ventilation system. Drains in all compartments. Note-All stainless latches, hinges & hardware. | |||||
| Exterior Compartments Construction | Street Side: Two standard compartments w/ two adjustable shelves, compartment over wheel well w/one adjustable shelf, standard rear compartment with one adjustable shelf. Curb Side: Front compartment minimum of 60 inches in height w/ standard width, standard second compartment w/ one adjustable shelf, long horizontal compartment w/ one adjustable shelf, short rear compartment with one adjustable shelf. | |||||
| Interior bulkhead | A fiberglass or aluminum bulhead is to be installed in the interior of the body 46 inches from the front interior of the body. Divider should be completely sealed to prevent any air movement between the two compartments. | |||||
| Lights | FMVSS lighting package. Quick connect loomed wiring harness. Flush mounted tail and backup lights, clearance lights and reflectors. License plate light with bracket. 3 piece switch panel in cab, 2 interior roof dome lights with a switch in the cab panel, 2 "V-head" amber strobes mounted on upper rear sides of canopy and 2 hide-a-way amber strobes mounted in front lights operated by a power supply with a switch in cab panel. | |||||
| Paint | Exterior Ford paint code "84S53, Code M6284F" (School Bus Yellow) Gelcoat or polyurethane automotive paint. All interior compartments color to be white or reflective gray. | |||||
| Bumper & Trailer Hitch | 8" steel tread plate step, class iv drop receiver hitch | |||||
| Fuel fill cone and DEF tank | Aluminum for F350 dual rear 40 gal. tank-aft.axle, marked Diesel fuel only. F350 DEF fill cup in front or rear portion of roadside wheel panel, same side as diesel tank fill. Ford DEF tank relocated inside frame. | |||||
| Installation | Vehicle to be picked up at our location in Augusta, items installed, and vehicle returned to CFM in Augusta. (Please include in Bid!!) All electrical connections to be sealed with heat shrink and fully protected with heavy duty wire loom. Absolutely no "Scotch-Lok" style connectors! | |||||
| Options | Please quote the following. Heavy duty, ball bearing, shelves for tools to fit in front curbside compartment just before wheelwell. A heavy duty shelf (approximately 22 inches wide) in front compartment along the driver side wall approximately 20 inches from ceiling. Heavy duty shelf in rear compartment, along bulkhead, approximately 48 inches above floor. | |||||
| Accessories | Back up alarm, DOT Safety kit, 2 wheel chocks, 7 way RV style trailer connector. | |||||
| Make | Model | |||||
| Possible Quantity | Unit Cost | Total Cost | ||||
| 1 | ||||||
| Bidder (Vendor) | Unit cost | Contact's Telephone | ||||
| Vendor's Comments: | ||||||
| Estimated time for delivery: |
Sheet2
| Aluminum or Composite Fiberglass Service Body |
| Heavy duty fiberglass composite or aluminum service body with canopy for dual rear wheel. All stinless steel latches, hinges, and hardware. |
| 2011 Ford F350 Super duty cab and chassis, DRW, regular cab, 4x4, 6.7 litre diesel, 13000GVW, cab to axle: 84", 162 WB |
| Length: 132" Width: 94" Height: 60 inch inside head room |
| Aluminum or fiberglass composite construction throughout, steel understructure, 1/8"steel threadplate floor, 3/16" smooth aluminum header panel, 3/16" aluminum tail skirt, fully undercoated, undercoated steel wheel well liners, aluminum rock guards at front of body. |
| Heavy duty, closed cell automotive type. |
| Aluminum or Fiberglass composite canopy roof, full width, with double rear doors and aluminum bulkhead (if available). 2" retainer on top of compartment both street and curb sides. Single door for front compartment on curb side. |
| Vinyl covered stainless steel cables on all doors. 4 over center door checks. Non-skid compartment tops. One-piece molded doors with automotive finish both sides. Recessed door jambs. Shelves to be 18 gauge galvanized, hemmed, rated for 250 lb. capacity, with twenty shelf dividers. Master rod lock system. Flow thru ventilation system. Drains in all compartments. Note-All stainless latches, hinges & hardware. |
| Street Side: Two standard compartments w/ two adjustable shelves, compartment over wheel well w/one adjustable shelf, standard rear compartment with one adjustable shelf. Curb Side: Front compartment minimum of 60 inches in height w/ standard width, standard second compartment w/ one adjustable shelf, long horizontal compartment w/ one adjustable shelf, short rear compartment with one adjustable shelf. |
| FMVSS lighting package. Quick connect loomed wiring harness. Flush mounted tail and backup lights, clearance lights and reflectors. License plate light with bracket. 3 piece switch panel in cab, 2 interior roof dome lights with a switch in the cab panel, 2 "V-head" amber strobes mounted on upper rear sides of canopy and 2 hide-a-way amber strobes mounted in front lights operated by a power supply with a switch in cab panel, 50 watt retangular halogen flood light mounted over center high mount brake light with switch in cab panel. |
| Exterior Ford paint code "84S53, Code M6284F" (School Bus Yellow) Gelcoat. All interior compartments color to be white or reflective gray. |
| 8" steel tread plate step, class iv drop reciever hitch |
| Aluminum for F350 dual rear 40 gal. tank-aft.axle, marked Diesel fuel only. F350 DEF fill cup in front portion of roadside wheel panel, same side as diesel tank fill. Ford DEF tank relocated inside frame. |
| Vehicle to be picked up at our location in Augusta, items installed, and vehicle returned to CFM in Augusta. (Please include in Bid!!) All electrical connections to be sealed with heat shrink and fully protected with heavy duty wire loom. Absolutely no "Scotch-Lok" style connectors! |
| Back up alarm, DOT Safety kit, 2 wheel chocks, 7 way RV style trailer connector. |
| Model |
Sheet3
File details come from the government source that posted it. Updated .