DEPFiberglassutilitybody184165(1).xls
XLS spreadsheet 25 KB Posted
- Attached to
- Fiberglass composite service body for 184-165
- Solicitation number
- RFQ - 18P - 10071400000000000043
- Issued by
- Kennebec County, Maine
About this file
This is a specifications document from the State of Maine Department of Environmental Protection (DEP) for the procurement of a fiberglass composite service body for vehicle 184-165. The document outlines detailed specifications for a custom-built utility body constructed of fiberglass composite materials, designed to be mounted on a specified chassis. The service body must meet particular dimensional requirements, weight limitations, and functional specifications including compartmentalized storage, equipment mounting provisions, and safety features. The procurement seeks one unit to be delivered within a timeframe to be specified in the formal solicitation. No specific response deadline, site visit requirements, or bidder's conference details are provided within this specifications document, as these elements are typically contained in the formal request for proposals or invitation to bid that accompanies the specifications.
The document focuses exclusively on technical and performance specifications for the fiberglass composite service body, including material standards, construction methods, finish requirements, and quality assurance criteria. Pricing information, set-asides, incumbent contractor details, and funding sources are not addressed in this specifications file. The document serves as the technical baseline for vendors to understand the exact requirements and develop competitive bids. Prospective bidders should reference the formal solicitation notice and any addenda issued by the Maine DEP for procurement timeline, submission instructions, evaluation criteria, and contract award information.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation_terms.doc | DOC document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| SPEC# 2010DEPFIBERGLASSUTILITY-60CA | COMPOSITE FIBERGLASS SERVICE BODY | ||||||
| GENERAL DESCRIPTION | Heavy duty fiberglass composite utility body with 1500lb liftgate. All stainless steel latches, hinges, and hardware. | ||||||
| MINIMUM SPECIFICATIONS | |||||||
| APPLICATION | 2011 Ford F350 Super Duty Cab & Chassis, DRW, Super Cab, 4X4, 6.7 Litre Diesel, 13000GVW, 162" WB, cab to axle: 60" | ||||||
| BODY SIZE | Length: 108" Width: 94" Height: 40" | ||||||
| BODY SHELL & FLOOR | Fiberglass composite construction throughout, steel understructure, 1/8" steel treadplate floor, E-track and wood buffer wall strap system in load bed area, 4 recessed floor tie downs-2 directly above the rear axle & 2 at the rear of the body. 3/16" smooth aluminum header panel, 3/16" aluminum tail skirt, fully undercoated, undercoated steel wheel well liners, aluminum rock guards at front of body. | ||||||
| WEATHER STRIPPING | Heavy duty, closed cell automotive type | ||||||
| EXTERIOR COMPARTMENTS CONSTRUCTION | Vinyl covered stainless steel cables on all doors. 4 over center door checks. Non-skid compartment tops. One-piece molded doors with auomotive finish both sides. Recessed door jambs. Shelves to be standard fiberglass, rated for 250lb. capacity, with twenty shelf dividers. All compartments to be lighted & wired to one of the factory switches in cab, Master rod lock system. Flow thru ventilation system. Drains in all compartments. Note-All stainless hardware latches, hinges, & hardware!! | ||||||
| EXTERIOR COMPARTMENTS LAYOUT | Street Side: Standard front compartment with 1 adjustable shelf. Standard Horizontal compartment over wheel well with one adjustable shelf. Standard rear compartment with one adjustable shelf. Curb Side: Standard front compartment with 1 adjustable shelf. Long horizontal compartment with one adjustable shelf. Short rear Compartment with one adjustable shelf. | ||||||
| LIGHTS | FMVSS lighting package. Quick connect loomed wiring harness. Flush mounted tail and backup lights, clearance lights and reflectors. License plate light with bracket. 3 piece switch panel in cab, 2 interior roof dome lights with a switch in cab panel, 2 flush mount amber strobes mounted in rear above tail and backup lights and 2 hide-a-way amber strobes mounted in front lights operated by a power supply with a switch in cab panel, adjustable 50 watt rectangular halogen flood light mounted on top rear of driver's side cabinet with switch in cab panel. | ||||||
| LIFTGATE | 1500lb capacity, tailgate style, 56" x 26" 1 piece aluminum platform with 5" tapered Ramp | ||||||
| PAINT | Exterior Ford paint code "84S53, Code M6284F" (School Bus Yellow) Gelcoat. All interior compartments color to be white or reflective gray. | ||||||
| TRAILER HITCH | Class V drop reciever hitch rated for 10,000 lbs. weight carrying | ||||||
| FUEL FILL CONE | Aluminum for F350 single rear 40 gal. tank-aft.axle, marked "Diesel Fuel Only". | ||||||
| INSTALLATION | Vehicle to be picked up at our location in Augusta, items installed, and vehicle returned to CFM in Augusta. (Please include in bid!!) All electrical connections to be sealed with heat shrink and fully protected with heavy duty wire loom. Absolutely no "Scotch-Lok" style connectors | ||||||
| ACCESSORIES | Wheel chock holders in fenders with wheel chocks, DOT safety kit, Back up Alarm, 7 way RV style trailer connector, Spare tire mount-supplied loose. | ||||||
| MAKE | Model | ||||||
| Possible Quantity | Unit Cost | Total Cost | |||||
| 1 | |||||||
| Bidder (Vendor) | Contact Person | Contact's Telephone | |||||
| VENDOR COMMENTS | |||||||
| ESTIMATED TIME FOR DELIVERY: |
Sheet2
Sheet3
File details come from the government source that posted it. Updated .